Vinyl House Research Articles

Effects of environmental control using groundwater and full open-roof vinyl house on yield in long-term cultivation of three cultivars of tomatoes in Akita, one of the coldest regions in Japan

Effects of environmental control using groundwater and full open-roof vinyl house on yield in long-term cultivation of three cultivars of tomatoes in Akita, one of the coldest regions in Japan

Dry matter distribution, yield and seed quality of soybean (Glycine max) genotypes as affected by water stress

Water stress is a major constraint for crop productivity and culturing right cultivars may produce a considerable yield under such stressful condition. An experiment was conducted inside a vinyl house to evaluate the effect of water stress on dry matter distribution, yield, and seed quality of eight soybean genotypes, viz. G00006, BD2336, AGS383, PK472, BCS-1, NCS-1, BU Soybean-1 and BARI Soybean-6. They were grown in pots and subjected to water stress (20% of field capacity, FC) and control (80% of FC). The water stress reduced plant height, leaf number, leaf, stem, and root dry matter by 23, 45, 46, 45 and 19%, respectively, across the genotypes. Under water stress, the soybean genotypes G00006, BCS-1, NCS-1 and BARI Soybean-6 beard only 6 to 30% pod and 5 to 34% seed compared to the control condition. The results further indicated that yield of BD2336 and AGS383 were less affected by the stress than those of other genotypes. Interestingly, water stress exerted positive effect on seed germination, viability, speed of germination and vigor index in BD2336 and AGS383, respectively. Nitrogen and seed protein content were found the highest in BCS-1 under control (9.82 and 58.42% respectively) followed by AGS383. Phosphorus content in seed also reduced by the stress in the tested genotypes, except BD2336 (0.29% in control and 0.96% in water stress) and BARI Soybean-6. Potassium content in seed was reduced by the stress in the tested genotypes, except G00006 and BARI Soybean-6. Based on the findings related to water stress effects on yield and seed quality, particularly seed protein of the tested eight soybean genotypes, it was concluded that genotypes AGS383 and BD2336 might be considered for field trial under water deficit condition.

Heat Stress and Water Irrigation Management Effects on the Fruit Color and Quality of ‘Hongro’ Apples

Increasing fruit crop production sustainability under climate change, particularly increasing temperatures, is a major challenge in modern agriculture. High temperatures affect apple fruit quality and decrease its color. Herein, we constructed an experimental field under temperature simulation to evaluate climate change mitigation strategies for apples. ‘Hongro’ apples were subjected to three treatments: (1) cultivation inside a vinyl house for heat treatment (heat induction), (2) cultivation under water irrigation (heat reduction), and (3) cultivation under normal atmospheric temperature (control). At harvest, the fruits of the heat treatment group exhibited poor coloration, with a lower gene expression and pigment accumulation than those of the water irrigation and control groups. Furthermore, the fruit quality of the heat treatment group decreased, with a lower soluble solid content (SSC) and titratable acidity (TA), and smaller fruits. Additionally, a higher fruit disorder (cracking and spots) ratio was observed in the heat treatment group than in the water irrigation and control groups. However, the fruits of the water irrigation group exhibited higher quality indexes (flesh firmness, SSC, and TA) and less cracking than those of the heat treatment and control groups. Heat reduction, including water irrigation, may be used for orchard management to prevent climate change-induced increasing temperatures.

Selection of Mungbean Genotypes Against Waterlogging Stress

A pot experiment was conducted in the vinyl house of Sher-e-Bangla Agricultural University (SAU), Dhaka-1207, during kharif-I season (March to June 2022) to identify waterlog tolerant mungbean genotypes. Thirty mungbean genotypes (29 advanced lines and one variety, BARI Mung-6) were evaluated under waterlogging (96 hours) and normal conditions. Waterlogging caused a drastic reduction in dry matter and seed yield in mungbean, however, genotypes showed variable response to waterlogging. Under waterlog condition the higher relative yield was found in M11, M8, M30, M7, M16 and M14 while lower in M2 and M17. Dry matter production also varied among the genotypes due to waterlogging; however, dry matter production of the genotypes M8, M7, M22, M2, M19 and M11 were comparatively higher than other genotypes. Stress tolerance index (STI), yield index (YI) and relative yield (RY) of M16, M20, M7, M8, M11, M30 and M14 were higher than other genotypes. On the basis of dry matter production, STI, YI and RY, genotypes M7, M8, M11, M12, M16, and M20 could be selected as relatively tolerant genotypes against waterlogging stress.
 Bangladesh Agron. J. 2023, 26(1): 40-47

Strategies for Sustainable Management of Agricultural Waste Vinyl in South Korea

Vinyl, such as those in the form of mulching and vinyl houses, is used to improve agricultural productivity. It is generated as an agriculture waste vinyl (AWV) after use. The collected AWV is transported to a recycling facility and shredded, washed, and compressed to be recycled. Recycled materials can contribute to the circular economy of agriculture as they are used again as an agricultural plastic product. However, in Korea, there are concerns about the illegal disposal (landfill, incineration) of AWV. So, a new management model is needed in which stakeholders voluntarily establish an AWV management system. In this study, a sustainable management strategy was proposed. This strategy is reinforcing the responsibility of the producers of AWV and forms a value chain in the proper discharge after consumption by applying the deposit system proposed to recover AWV. Local governments and the National Agricultural Cooperative Federation (NH) proposed education to curb the illegal disposal of AWV, and for managing areas where a collection system has not yet been established, biodegradable mulching vinyl (BMV) was proposed to minimize the environmental pollution caused by AWV. It was calculated that the EPR contribution was 0.16 USD/kg, and the introduction of BMV was 0.42 USD/kg in Korea. This study will provide a new alternative in countries struggling with AWV management.

A New Approach: Ethyl Formate Fumigation to Control Bemisia tabaci (Hemiptera: Aleyrodidae) in a Yellow Melon Vinyl House

Due to concerns over the resistance development to existing pesticides, chemical poisoning among farmers, and chemical residue on crops, sprung up a growing need to develop new pest control strategies for utilization in protected houses in Korea. A series of experiments tested a new technology using a fumigant, ethyl formate, in growing crops in the protected houses. It was revealed that the glasshouse was inadequate for the fumigation system using the fumigant since ethyl formate gas sharply decreased due to gas leaking through the gaps between the glass frames. On the other hand, the gas concentration was stable during the fumigation process. Experiments were also conducted to evaluate its phytotoxicity on cucurbits crops (yellow melon). The crops were fumigated at 20 °C in three fumigation schedules (2, 4, and 12 h). The results revealed that the developmental stages of yellow melon showed no sign of phytotoxicity in all conditions. However, the fumigation damaged the shoots of red pepper in higher humidity and at a longer duration. Interestingly, Bemisia tabaci were (100%) completely killed in all these conditions. Based on the results of the above experiments on the high efficacy on the control of Bemisia tabaci and zero phytotoxic effects of the ethyl formate fumigation on yellow melon, verification experiments for the effectiveness were conducted thrice in farmer’s yellow melon vinyl houses and once in a farmer’s cucumber vinyl house. Results demonstrated that ethyl formate fumigation for 2 h at 2 g m−3 concentration could 100% kill the adults of Bemisia tabaci with no phytotoxic effect on the crops. Therefore, we could conclude that the 2-h fumigation system with 2 g m−3 ethyl formate would be a new alternative to the existing chemical spraying methods.

Statistical Analysis and Review of Event Mean Concentrations in Stormwater Runoff from Agricultural Nonpoint Source Pollution among Different Land Use Types

Objectives : In this study, the characteristics of stormwater runoff from agricultural nonpoint pollution sources investigated under various experimental conditions were evaluated among different land use types (e.g., paddy, field, field (alpine), and vinyl house), and event mean concentrations (EMCs) for each water quality parameter were statistically analyzed. These results can be used in calculating the contribution of stormwater runoff to water quality of receiving water body by performing quantitative and qualitative analysis. The unit loads calculated were compared with Ministry of Environment TMDL (2019) to secure the reliability of the calculated unit loads.Methods : EMCs and unit loads investigated in various studies were classified in terms of paddy, field, field (alpine), and vinyl house. Among various land use types, EMCs and unit loads were statistically analyzed quantitatively and qualitatively. For EMCs, a null hypothesis is that ‘EMCs of water quality parameters among different land use types are not different at a statistically significant level (α=0.05)’. Based on the results of statistical analysis, heteroscedasticity (p<0.05) and Welch-test method were consequently applied, and post hoc test was performed using the Games-Howell method. Finally, unit loads was compared and reviewed against the TMDL (2019) unit loads of the Ministry of Environment.Results and Discussion : Various EMCs in all water quality parameters were found among different land use types (i.e., paddy, field, field (alpine) and vinyl house). For most water quality parameters, EMCs tended to decrease in the order of field (alpine) > field > vinyl house > paddy. The coefficient of variance (CV) values of all water q uality parameters were 0.5 or greater. Based on these results, EMCs in agricultural nonpoint source pollution are very diverse and deviated due to the combination of natural and artificial factors. Post hoc test results indicated different statistical significance among all water quality parameters. In addition to the land use types, both natural factors (i.e., season, rainfall, antecedent rainfall day, and, rainfall runoff rate) and artificial factors (i.e., cultivator manipulation, emission route, type of crop, and amount of compost) affect the characteristics of stormwater runoff. In particular, in the case of field (alpine) with prominent topographical feature of slope, and EMCs were statistically greater than those from other land use types in all water quality categories (p<0.05).Conclusions : Countermeasures for field (alpine)with greater EMCs than paddy, field and vinyl house, should be performed priority. EMCs were affected by a complex interaction between natural factors (i.e., season, rainfall, antecedent rainfall day, and, rainfall runoff rate) and artificial factors (i.e., cultivator manipulation, emission route, type of crop, and amount of compost), and additional data and research are required for further study to elucidate these complex interactions.

Physiological and Yield Responses of Some Selected Rapeseed/Mustard Genotypes to Salinity Stress

An experiment on rapeseed/mustard genotypes was conducted during 2019-2020 rabi season in vinyl house of Plant Physiology Division of Bangladesh Agricultural Research Institute (BARI), Gazipur to find out the salt-tolerant genotypes based on the responses of their physiological parameters and yield. Five selected rapeseed/ mustard genotypes (V1= Jun-536, V2 = BJDH-12, V3 = BD-10115, V4 = BARI Sarisha-14, V5 = BD-6950) were tested at three salinity levels (S0= 0, S1= 5 and S2=10 dS m-1). Irrespective of the genotypes, salinity stress showed a negative effect on the measured physiological parameters as well as seed yield. Leaf chlorophyll contents, leaf area, leaf photosynthetic rate and total dry matter (TDM) were reduced due to salinity stress which ultimately affected seed yield irrespective of the genotypes. However, these parameters were less affected by the salinity in V1 and V2 genotypes compared to others. Sodium and potassium ion contents and their ratios (K+/Na+) in leaf tissues were significantly affected by salinity stress. Among the genotypes, V1 and V2 showed higher K+/Na+ ratios in leaf under both the salinity treatments, and that phenomenon indicated their higher tolerance to salinity than the other genotypes. Catalase (CAT), Peroxidase (POD) activity and Malondialdehyde (MDA) content of the genotypes increased due to salinity stress with variability among the genotypes. The higher CAT and POD activity with lower MDA content was found in V1 and V2 genotypes which indicated their better salt tolerance ability compared to others. These genotypes also showed higher seed yield under both the salinity levels (5 and 10 dS m-1) compared to other genotypes. Based on the responses of physiological parameters and seed yield to salinity, the genotypes Jun-536(V1) and BJDH-12(V2) could be considered relatively tolerant to salinity stress. Bangladesh Agron. J. 2021, 24(1): 43-55

Adsorption Characteristics of Cd and Pb on Microplastic Films Generated in Agricultural Environment

Objectives:Plastics are widely used in daily life and in various industrial fields due to their convenience and thermal insulation, and the use of plastics is continuing to increase. In agricultural environments, plastics are largely used for vinyl houses and mulching vinyl. Used plastics are degraded into small fragments through physical, chemical, and biological processes. Among these, plastics with a particle size of 5 mm or less are defined as microplastics. Since microplastics have a relatively large surface area, various pollutants including heavy metals can potentially be adsorbed and affect the agricultural ecosystem. The purpose of this study is to evaluate the Pb and Cd adsorption characteristics on microplastic films frequently generated in agricultural environments.Methods:The Pb and Cd adsorption characteristics on microplastic films were studied with 3 different plastic films. Microplastic samples were prepared by cutting PVC (polyvinyl chloride) and PE (polyethylene) films to have the sizes of < 5 mm×5 mm. The prepared microplastic samples were placed in Pb or Cd solutions having a range of concentrations and shaken for 72 h for sorption tests. The experimental results were fitted to the Langmuir, Freundlich, and Temkin isothermal adsorption models.Results and Discussion:The isothermal adsorption test results obtained fitted well to the Langmuir and Freundlich models (R<sup>2</sup>>0.9), but not the Temkin model. Regardless of the plastic type, the values of Langmuir constant (KL) and Temkin constant (AT) for Pb were larger than those for Cd, and the Freundlich constant (nF) showed a tendency of Pb>Cd>1, indicating the greater Pb sorption strength or affinity than Cd on PVC and PE.Conclusions:This study shows that the microplastics in soil adsorb heavy metals like Cd and Pb affecting the heavy metal fate in the soil environment. With an increasing attention on the environmental problems due to plastic wastes, this study provides the basis for the need of management of soil environment. Therefore, further research on microplastics in soil environment is required.

Performance confirmation test of arched FRP vinyl house (E)

Performance confirmation test of arched FRP vinyl house (E)

Performance confirmation test of arched FRP vinyl house (J)

Performance confirmation test of arched FRP vinyl house (J)

A Study of the Effects of Enhanced Uniformity Control of Greenhouse Environment Variables on Crop Growth

In order to ensure high crop yield and good quality in greenhouse horticulture, the major environment control variables, such as temperature, humidity, and CO2 concentration, etc., need to be controlled properly, in order to reduce harmful effects on crop growth by minimizing the fluctuation of the thermal condition. Even though a hot water-based heating system is evidently superior to a hot air-based heating system, in terms of the thermally stable condition or energy saving, a hot air-based heating system has occupied the domestic market due to its economic efficiency from an initial investment cost saving. However, the intrinsic drawbacks of a hot air-based heating system, being more frequent variation of thermal variables and an inordinate disturbance on crops due to its convective heat delivery nature, are believed to be the main reasons for the insufficient crop yield and/or the quality deterioration. In addition, the current thermal environment monitoring system in a greenhouse, in which a sole sensor node usually covers a large part of cultivating area, seems to have a profound need of improvement in order to resolve those problems, in that the assumption of thermal uniform condition, which is adequate for a sole sensor node system, cannot be ensured in some cases. In this study, the qualitative concept of the new control variable—the degree of uniformity—is suggested as an indicator to seek ways of enhancing the crop yield and its quality based on the multiple sensor nodes system with a wireless sensor network. In contrast to a conventional monitoring system, for which a newly suggested concept of qualitative variable cannot be estimated at all, the multiple sensor nodes-based thermal monitoring system can provide more accurate and precise sensing, which enables the degree of uniformity to be checked in real-time and thus more precise control becomes possible as a consequence. From the analysis of the results of the experiment and simulation, it is found that the crops in plastic vinyl houses can be exposed to a serious level of non-uniform thermal condition. For instance, the temperature difference in the longitudinal and widthwise direction is 3.0 °C and 6.5 °C, respectively for the case of 75 × 8 m dimension greenhouse during a typical winter season, and it can be hypothesized that this level of non-uniformity might cause considerable damage to crop growth. In this paper, several variants of control systems, within the framework of the multiple sensor nodes system, is proposed to provide a more thermally-stable cultivating environment and the experimental verification is carried out for different scales of test greenhouses. The results showed that a simple change of heating mode (i.e., from a hot air- to a hot water-based heating system) can bring about a significant improvement for the non-uniformity of temperature (more or less 80%), and an additional countermeasure, with local heat flux control, can lead to a supplementary cut of non-uniformity up to 90%. Among the several variants of local heat flux control systems, the hydraulic proportional mass flow control valve system was proven to represent the best performance, and it can be hypothesized that the newly suggested qualitative variable—the degree of uniformity—with the multiple sensor nodes system can be a good alternative for seeking enhanced cultivating performance, being higher crop yield and better quality along with energy cost saving.

Damage index estimation by analysis of meteorological disasters on film plastic greenhouses

This study focuses on the analysis of the effect of meteorological disasters on film plastic greenhouses by typhoons, heavy snow, strong wind, and heavy rain. The data of meteorological disasters from 1998 to 2015 were analyzed on provincial basis to calculate the damage rate depending on the weather cause. The cumulative damage area is 20279 hm2. The damage rates of typhoons, heavy snow, strong wind, and heavy rain are 46.4%, 47.4%, 2.5%, and 3.8%, respectively. The damage index of the greenhouse, which is the ratio of the greenhouse area to the cumulative damage area, was proposed to estimate the disaster risk for 17 administrative districts. The damage index data and the cumulative damage areas were divided using the Jenks’ Natural Breaks method. The average damage index is 0.66, and the damage indices are high in the metropolitan cities. Keywords: damage index, global warming, heavy snow, strong wind, heavy rain, protected horticulture, typhoon, vinyl house DOI: 10.25165/j.ijabe.20191205.4493 Citation: Ryu H R, Choi M K, Cho M W, Yu I H, Kim S Y. Damage index estimation by analysis of meteorological disasters on film plastic greenhouses. Int J Agric & Biol Eng, 2019; 12(5): 58–63.

Approach of monocarpic senescence control by nitrogen manipulation in mungbean and cowpea

Pods start growing almost at the same time and mature simultaneously in soybean (Glycine max (L.) Merrill) plants. But mungbean (Vigna radiata L. Wilczek) and cowpea (Vigna sinensis Endl.) perform unsynchronized pod maturity. To overcome unsynchronized pod maturity the nitrogen redistribution aspects of mungbean and cowpea were investigated based on the linkage of soybean. Pot experiment was conducted using a nodulating mungbean variety (cv. XANH NINH THUAN) in 2015 and cowpea variety (cv. IT98K-205-8) in 2016 in the vinyl house at Saga University in Japan. During the experiment, nutrient solution was applied by changing nitrogen concentrations to 5, 25 and 100 ppm (control). Mungbean plants provided with low concentration of 5 and 25 ppm of nitrogen supply was not capable to produce continuous pods. Cowpea plants supplied with low concentration of nitrogen was also unable to produce successful pods continuously. Insufficient nitrogen hampered the continuation of pod setting in both the cases, might be due to, all the vegetative stored nitrogen had been utilized for seed development during the vegetative phase before pod setting. In case of 100 ppm nitrogen supply, for both mungbean and cowpea, no senescence and nitrogen remobilization occurred. However, researches showed that soybean typically undergoes the remobilization evidence, i.e., monocarpic senescence, in 100 ppm of nitrogen supply.
 J.Bangladesh Agril. Univ. 16(3): 386–395, December 2018

A new concept for controlling tiny-scale insect pest in green house – noval technology to apply liquid ethyl formate:

As increased agricultural insecticide uses and trends in insecticide resistance, increased labor cost to apply insecticide and limited its application to fertility season in green house. There is a need of a safe, labor-saving and confined space application concept to manage control tiny-scale insect pest such as thrips and whitefly. Fumigation with ethyl formate (EF), which is considered as effective to various insect pest and safely use in quarantine treatment, was evaluated in the confined space (glass house) and semi-confined space (vinyl house). The new application technology for application of liquid EF could be the one of the key options for control of tiny flying insects in greenhouses that would save labor and operation costs. It could be connected to smartfarm technologies in the near future.

Effects of Nitrogen Forms on Root System Development, Physiological Traits, and Dry Matter Production of Rice

The objectives of this study were to evaluate the effects of nitrogen forms on root system development (expressed as total root length, nodal root number, nodal root length, and lateral root length), water use, photosynthetic rate, and dry matter production under water deficit (WD) at 20% w/w and continuously waterlogged (CWL) conditions. Rice plants cv. Nipponbare were grown in plastic pots in a vinyl house. Six N forms were applied at the same rate of 360 mg N per pot, and were prepared as follows: N-NH4+ alone (A); N-NH4+ with nitrification inhibitor (A+DCD); N-NO3- alone (N); N-NO3- with nitrification inhibitor (N+DCD); combined N-NH4+ and N-NO3- (AN); and combined N-NH4+ and N-NO3- with nitrification inhibitor (AN+DCD). The nitrification inhibitor, dicyandiamide (DCD) (C2H4N4), was applied at the rate of 100 mg pot-1. The results of the experiment showed that under both WD and CWL conditions, significant increases were seen in the root system development as expressed through total root length, nodal root number, nodal root length, and lateral root length in the N-NO3- treatments with and without DCD compared to the application of N-NH4+ treatments with and without DCD. This led to an increase in water use, and eventually a significant increase in dry matter production. Similarly, the A treatments with and without DCD also significantly increased root system development as compared with the AN and AN+DCD treatments. Furthermore, under both CWL and WD conditions, the positive and notably significant correlations between the total root length and water use, as well as between the total root length and shoot dry weight, were found only in the A and A+DCD treatments. These results indicate that rice prefers sole ammonium over the mixed ammonium-nitrate treatment, and sole nitrate applications under both WD and CWL conditions.

Screening of Rice (<i>Oryza sativa</i> L.) Genotypes at Reproductive Stage for their Tolerance to Salinity

Soil salinity is one of the most devastating environmental stresses for rice production in the coastal areas of Bangladesh. Improvement in salt tolerance of rice is an important way for the economic utilization of coastal zones. An experiment was conducted at the vinyl house of the Department of Agronomy, Bangabandhu Sheikh Mujibur Rahman Agricultural University (BSMRAU), Bangladesh during December 2016 to April 2017 to determine the effects of different salinity levels on the yield and yield components of some rice (Oryza sativa L.) genotype sand finally, screening of rice genotypes for salt tolerance. The experiment containing four treatments was laid out in a complete randomized design with five replications. The treatments were four levels of saline water with electrical conductivities at control (0.3 dSm-1), 5, 10 and 15dSm-1. Based on screening at germination stage, relatively salt-tolerant eleven genotypes with two check varieties were used in this experiment. The study showed that increase in salinity level significantly decreased yield and yield contributing characters of rice. However, among the eleven, three genotypes (Chapali, Patnai 23 and Soloi) were considered as moderately salt tolerant at 15 dSm-1 on the basis of their yields and yield contributing characteristics such as plant height reduction, total tiller reduction, effective tiller reduction, reduction of fertile grains per panicle, grain yield and relative grain yield. Therefore, Chapali, Patnai 23 and Soloi might be recommended as moderately salt tolerant rice genotypes. The Agriculturists 2018; 16(1) 65-77

Dry Matter Production and Seed Yield of Soybean as Affected by Post-Flowering Salinity and Water Stress

The experiment was conducted in a vinyl house of the Agronomy Division, Bangladesh Agricultural Research Institute (BARI), Joydebpur, Gazipur, during rabi season of 2015-2016 to evaluate the sensitivity of different post-flowering growth stages of soybean to salinity (100 mM NaCl) and water stress (70% depletion of available water) imposed at 4th to 6th, 6th to 8th, 8th to 10th and 10th to 12th wees after emergence. Shoot dry weight wa found more sensitive to salt and water stress than root dry weight at all the post flowering growth stages. The highest relative shoot dry weight (91.47%) and relative root dry weight (95.58%) were recorded from salt and water stressed plants, respectively when both the treatments imposed at 4th to 6th weeks after emergence. The highest seed yield (10.47 g plant-1 ) was obtained from the control treatment followed by that (8.68 g plant-1) under salt stress treatment imposed at 10th to 12th weeks after emergence. Contrary, the lowest seed yield of 0.69 g plant-1 was obtained from the salt stress treatment imposed at 4th to 6th weeks after emergence. Among the stages, 4th to 6th weeks after emergence of soybean was found the most sensitive to salt stress in relation to seed yield reduction. The salt stress imposed at 6th to 8th weeks after emergence was also found damaging for seed yield production.Bangladesh Agron. J. 2016 19(2): 21-27

Development of Design Wind Speed Estimation Model for Underwriting Non-Disaster-Resistant of Vinyl House

Development of Design Wind Speed Estimation Model for Underwriting Non-Disaster-Resistant of Vinyl House

Development of Defogger Equipped with a Roller Horsehair Brush

In order to remove fog often causes various troubles in our daily lives, the novel defog blower equipped the roller brush made of recycled horse’s mane hair was developed. This work presents the overview of new defog devices and the experimental data obtained at two different kinds of defogging experiments. In the model experiment carried out at the enclosed cleanroom (W 5.9 m×L 5.1 m×H 2.4 m) targeted a vinyl house, fog was dissipated in less than 30 seconds in case with wind entrainment and two minutes 45 seconds in case without wind entrainment after running of the newly designed defog blower. When the demisting blower was run in a duct, it has an excellent mist sweeping qualities as well as a great removal effect for the background particles (89.5% and 65.4% scavenging rates for fine and coarse particles, respectively). It can be therefore said that the mist eliminator presented in this paper is ideal for use in the sealing space like a vinyl house and the industrial sites where required to remove both harmful mist and particle.