Vinyl Alcohol Research Articles

Construction of interfacial interlocking structure in epoxy composites with enhanced mechanical performance and ultraviolet resistance

Replacing carbon fibers with organic fibers to reinforce the polymer matrix has become a promising development direction in the preparation of structural composites owing to its low density and cost, but the mechanical performance of organic fibers restricts their further application. Herein, poly(vinyl alcohol) (PVA) fibers were utilized to reinforce the epoxy resin (EP) through the incorporation of zinc oxide nanoparticles (ZnO NPs) in PVA solution (PVAS), and high-strength composite for 122.3 MPa with interfacial interlocking structure was successfully fabricated via vacuum assisted resin transfer molding (VARTM). ZnO NPs were coated on the PVA fibers and enhanced the surface roughness, which improved the mechanical performance of the composite. In comparison with untreated composites, the interlaminar shear strength (ILSS) of composites displayed a significant increase, from 99.4 MPa to 122.3 MPa, resulting from improved interfacial bonding and reduced interfacial gap. Simultaneously, the incorporation of ZnO NPs efficiently enhanced the ultraviolet (UV) resistance.

Harnessing potential of avian eggshell membrane derived collagen hydrolysate for bone tissue regeneration.

Natural bone grafts are the highly preferred materials for restoring the lost bone, while being constrained of donor availability and risk of disease transmission. As a result, tissue engineering is emerging as an efficacious and competitive technique for bone repair. Bone tissue engineering (TE) scaffolds to support bone regeneration and devoid of aforesaid limitations are being vastly explored and among these the avian eggshell membrane has drawn attention for TE owing to its low immunogenicity, similarity with the extracellular matrix, and easy availability. In this study, the development of bone ingrowth support system from avian eggshell membrane derived collagen hydrolysates (Col-h) is reported. The hydrolysate, cross-linked with glutaraldehyde, was developed into hydrogels with poly-(vinyl alcohol) (PVA) by freeze-thawing and further characterized with ATR-FTIR, XRD, FESEM. The biodegradability, swelling, mechanical, anti-microbial, and biocompatibility evaluation were performed further for the suitability in bone regeneration. The presence of amide I, amide III, and -OH functional groups at 1639cm- 1,1264cm- 1, and 3308cm- 1 respectively and broad peak between 16°-21° (2θ) in XRD data reinstated the composition and form. The maximum ratio of Col-h/PVA that produced well defined hydrogels was 50:50. Though all the hydrogel matrices alluded towards their competitive attributes and applicability towards restorative bone repair, the hydrogel with 40:60 ratios showed better mechanical strength and cell proliferation than its counterparts. The prominent E. coli growth inhibition by the hydrogel matrices was also observed, along with excellent biocompatibility with MG-63 osteoblasts. The findings indicate strongly the promising application of avian eggshell-derived Col-h in supporting bone regeneration.

Environmentally Compatible Poly (Vinyl Alcohol)/Banana Peel Nano Crystals/Bentonite Clay-based Composites Films: Influence of Nano Filler on Biodegradation Behavior

Objective: The present work shows the effect of Bentonite Clay (BC) on the biodegradation behavior of Poly Vinyl Alcohol (PVA)/Banana Peel Nano Crystals (BPNC) composite films. background: Nowadays, composite films manufactured from biodegradable or partially biodegradable polymers reinforced natural fillers start to gain attention because they are considered as one of the environmentally friendly biomaterials Method: Biodegradation studies were conducted using soil burial and bacterial degradation method. The prepared composite films were characterized by scanning electron microscopy. Results: Biodegradation studies reported that the composite films were more degradable in bacterial environment as compared to natural soil burial. The addition of Bentonite Clay (BC) had negative effect on degradation rate of composite films. method: Biodegradation studies were conducted using soil burial and bacterial degradation method. The prepared composite films were characterized by scanning electron microscopy. Conclusion: PVA/BPNC/BC composite film showed less weight loss (%) as compared to PVA/BPNC composite films because BC had stabilizing effect against the microbial attack which prevents biodegradation.

Self-healing hydrogel based on poly (vinyl alcohol)-poly (lysine)-gum arabic accelerates diabetic wound healing under photothermal sterilization

Diabetic wounds are a significant clinical challenge. Developing effective antibacterial dressings is crucial for preventing wound ulcers caused by bacterial infections. In this study, a self-healing antibacterial hydrogel (polyvinyl alcohol (PVA)–polylysine–gum arabic, PLG hydrogels) with near-infrared photothermal response was prepared by linking PVA and a novel polysaccharide–amino acid compound (PG) through borate bonding combined with freeze–thaw cycling. Subsequently, the hydrogel was modified by incorporating inorganic nanoparticles (modified graphene oxide (GM)). The experimental results showed that the PLGM3 hydrogels (PLG@GM hydrogels, 3.0 wt%) could effectively kill bacteria and promote diabetic wound tissue healing under 808-nm near-infrared laser irradiation. Therefore, this hydrogel system provides a new idea for developing novel dressings for treating diabetic wounds.

CDI crosslinked chitosan/poly (vinyl alcohol) electrospun nanofibers loaded with Achillea millefolium and Viola extract: A promising wound dressing

Biopolymer-based electrospun mats, mimicking the extracellular matrix, have been extensively explored in biomedical applications. This study compares Achillea millefolium (AM) and Viola (V) extracts for developing a biocompatible wound dressing. The extracts were incorporated into a Chitosan/polyvinyl alcohol (CS/PVA) matrix via electrospinning. Crosslinking with Carbonyldiimidazole (CDI) improved chemical stability, water resistance, and biodegradability. The resulting mats exhibited flawless interconnected nanofibers, confirming the presence of AM and Viola extracts as analyzed via FTIR. Significant differences were observed between these two herbal extracts, particularly in mechanical properties, with tensile strengths of 6.9 MPa for AM and 17.2 MPa for Viola. Viola extract demonstrated robust antibacterial properties, producing an 8.2 mm inhibition zone against Staphylococcus aureus, compared to AM's 30 %. The release of therapeutic agents indicated an initial rapid phase, followed by a controlled 72 h release at a consistent rate. Notably, Viola extract led to 80.9 % wound closure on the 10th day, surpassing AM extract at 63.7 %. In contrast, the control group achieved only 32.1 % closure. This comparative study underscores the distinct advantages of AM and Viola extracts in wound dressing applications. While AM presents specific strengths, Viola extract exhibits superior mechanical properties, antibacterial efficacy, and accelerated wound closure, suggesting its potential with significant clinical implications.

Inorganic/organic composite binder with self-healing property for silicon anode in lithium-ion battery

Silicon (Si) has garnered significant attention as a high-capacity anode material in high-energy density lithium-ion batteries (LIBs). Nevertheless, the huge volume variation of Si (>300%) during cycling results in rapid capacity deterioration, thereby impeding its commercial application. To confront this challenge, inorganic binder has been identified as a highly promising solution for Si anode due to its high bonding strength. Despite its effectiveness, the inorganic binder's limited elasticity hinders the rejuvenation of the impaired electrode structure. Hence, we devised an elasticity and self-healing composite binder, incorporating both inorganic and organic binders. The inorganic lithium metasilicate not only offers ample adhesion sites to Si but also establishes a protective coating layer on SiNPs. Simultaneously, the organic poly (vinyl alcohol) featuring a low glass transition temperature (72 °C) furnishes elasticity and a self-healing framework. Consequently, the Si anode shows exemplary cycling and rate performances. Additionally, the Si||NCM811 full cell attains a reversible capacity of 1.86 mAh/cm2 with a capacity retention of 67% after 50 cycles, indicating the commercial application potential of the composite binder. This study thus explores design strategies for composite binders, paving the way for high-performance Si anode.

Bioinspired fabrication of transparent poly(vinyl alcohol)-based films with excellent strength, ultraviolet blocking performance, and water vapor barrier properties

The development of biodegradable plastics with advanced mechanical performance and multifunctionality using renewable materials is highly important for their industrial applications. In this work, a novel eco-friendly and high-performance film was constructed by incorporating lignin–Cu nanoparticles (LNP@Cu) to poly(vinyl alcohol) (PVA) to mimic the granular nanostructure in mussel byssus cuticle. LNP@Cu with abundant o-quinone and o-phenol groups was prepared by the reduction of Cu(NO3)2 using alkaline lignin. The nanoparticles were found to have a spherical morphology with a diameter of approximately 500 nm and the LNP@Cu formed dense hydrogen bonds with the PVA matrix. The mechanical properties of the bioinspired films were dramatically improved and far superior to previously reported PVA films and the majority of engineering plastics. With 5 wt% of LNP@Cu loading, the films showed the optimal tensile strength of 106.9 MPa and toughness of 76.6 MJ m−3, which are 2.27 and 4.04 times as high as those of the neat PVA film, respectively. In addition, the fabricated PVA films exhibited excellent ultraviolet (UV)-shielding property and high transparency. Compared with the pristine PVA film, reinforced films showed decreased hydrophilicity and water vapor transmission rates. Overall, these excellent properties make the fabricated films a great potential for applications in packaging and UV shielding fields, giving inspirations for the design of robust green polymeric materials that meet industrial requirements.

Synthesis and Rheological Analysis of Non-Isocyanate Polyurethanes Blended with Poly(vinyl alcohol)

This study investigated the blending of non-isocyanate polyurethanes (NIPUs) with poly(vinyl alcohol) (PVA) at various ratios, with specific emphasis on ratios such as 20%, 50%, 80%, and 100% NIPU content. Focus has been made on assessing their rheological behaviour, mechanical performance, and thermal stability. As the NIPU content surpassed 50%, a shear-thickening trend emerged, suggesting a highly interwoven molecular structure. Rheological studies demonstrate viscosity variations dependent on blend composition and shear rate, with pure NIPU solution exhibiting shear thickening behaviour suggestive of network formation facilitated by the application of shear. Dynamic modulus analysis revealed viscoelastic properties in blends containing 50% and 100% NIPU. Thixotropic analysis showcased a remarkable structural recovery of 99% in solutions with over 20% NIPU, emphasizing the resilience of NIPU-rich blends to shear-induced alterations. Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) demonstrate thermal stability and crystallinity, with blends exhibiting intermediate behaviour and reduced crystallinity compared to pure PVA due to NIPU incorporation. Blends exceeding 10% PVA displayed reduced consistency and diminished PVA crystallization ability, corroborated by DSC and wide-angle X-ray diffraction (WXRD) results. Thermal stability increased with NIPU integration, and blends demonstrated intermediate thermal behaviour between the pure polymers. Notably, the PU2PVA8 blend demonstrates the highest miscibility and a unique combination of amorphous and crystalline nature, showcasing its potential for tailored material design with enhanced structural and thermal properties.

Poly(vinyl alcohol)/graphene nanoplatelet nanocomposites: Elucidation of the nanofiller, dispersing agent, and interphase effects on thermomechanical properties

AbstractPoly(vinyl alcohol) (PVA)/graphene nanoplatelet (GnP) nanocomposite films were fabricated by a solution casting method. High loadings (30–40 wt.%) of two GnP grades, that is, xGnP C300 (low surface area/large size) and C750 (high surface area/small size), were utilized in combination with three commercial dispersing agents, that is, DISPERBYK‐161, DISPERBYK‐162 TF, and DISPERBYK‐2014, to yield films with desirable stiffness and energy dissipation characteristics (dynamic mechanical analysis, DMA), as well as thermal properties (thermogravimetric analysis, TGA) for potential impact resistance applications. The addition of GnPs and dispersing agents to PVA leads to a maximum six‐fold increase in its Young's modulus for the PVA sample containing 40 wt.% C300 GnPs and DISPERBYK‐162 TF. However, the modulus of resilience drops dramatically for the same sample (about 18‐fold decrease), as expected. Also, C300 GnPs yield nanocomposites with higher Young's moduli that those obtained using C750 GnPs. The atomic force microscopy stiffness maps illustrate that C300 GnPs disperse better in the PVA matrix. Furthermore, the average interphase thickness in the PVA‐C300 nanocomposites (~300 nm) is almost double that of PVA‐C750 nanocomposites. Based on the TGA results, the addition of GnPs and dispersing agent to the PVA matrix leads to a moderate increase (an average of 3.5%) in the value of the neat PVA, while its char yield increases by an average 8.5‐fold. Specifically, the PVA/GnP nanocomposites containing DISPERBYK‐162 TF yield the largest and char yield values than the other systems. The insights gained in this work can guide the design of coatings for impact resistance applications.

Unleashing the electrochemical performance of zirconia nanoparticles on valve-regulated lead acid battery

The electrochemical act of valve-regulated lead acid batteries can be enhanced by conductive materials like metal oxides. This work aims to examine the preparation and influence of zirconia on poly(vinyl alcohol) based gel valve-regulated lead acid battery. Characterizations like Fourier transform infrared spectroscopy, ionic conductivity, water retention study, cyclic voltammetry, electrochemical impedance spectroscopy and galvanostatic charge-discharge techniques were done. The optimized gel system exhibited a discharge capacity of 198.45 μAh cm−2 at the current density of 0.6 mA cm−2. The battery cell with an optimized gel matrix displayed a maximum discharge capacity of 22.5 μAh at a current of 20 μA. After 500 continuous cycles, the battery attained a discharge capacity retention of 91 %. The presence of zirconia will increase the electrochemical performance of gel valve-regulated lead acid batteries.

Multifunctional PVA/gelatin DN hydrogels with strong mechanical properties enhanced by Hofmeister effect

Due to the low mechanical strength, poor tensile property, and inability to work under extreme conditions, hydrogels encounter obstacles in their practical applications. It was found that the Hofmeister effect could strengthen and toughen the single hydrogel networks. Herein, poly (vinyl alcohol) (PVA)/gelatin dual-network (DN) hydrogels with strong mechanical properties were prepared and improved by Hofmeister effect using Na2SO4 as the salting-out solution. The hydrophilic anion SO42- induced a salting-out effect, which made the interplay in PVA and gelatin stronger, and the network structure more compact and stable. Moreover, the dual-assisted effect of freeze-thaw and freezing salting-out further enhanced the mechanical properties. The as-obtained DN hydrogel had excellent overall mechanical properties with a fracture tensile strain, a tensile strength and a toughness of 1281 %, 1.12 MPa and 7.19 MJ/m3, respectively. In addition, it had the ability to withstand weights more than 5000 times its own mass. The hysteresis energy, Young's modulus, and toughness recovery of the hydrogel reached 91.21 %, 97.36 %, and 97.47 % of the original values when the interval time was 180 min. Furthermore, after treatment with ethylene glycol /H2O solution, the hydrogel was given high temperature resistance, anti-freezing and moisturizing properties, while maintaining its good mechanical properties in a wide temperature range. The weight remained at 84.7 % and 71.45 % of the original weight after one week at 25 °C and 12 h at 60 °C, respectively. This kind of multifunctional DN hydrogel with high mechanical properties will find wider application in the field of flexible electronic devices.

Preparation and Optical Characterization of Poly (Vinyl Alcohol): Eosin-Y Films Synthesized by Solvent Casting Method

Preparation and Optical Characterization of Poly (Vinyl Alcohol): Eosin-Y Films Synthesized by Solvent Casting Method

Preparation and Optical Characterization of Poly (Vinyl Alcohol): Eosin-Y Films Synthesized by Solvent Casting Method

Preparation and Optical Characterization of Poly (Vinyl Alcohol): Eosin-Y Films Synthesized by Solvent Casting Method

Complex Impedance Study of Graphite Nanopowder (GNP) Reinforced Polyvinyl Alcohol (PVA)‐Bismuth Ferrite (BiFeO3) Composite Films

AbstractIn this work, the graphite nanopowder (GNP) reinforced poly(vinyl alcohol) based Bismuth ferrite (BiFeO3; BFO) composite films with different weight percentages of GNP using a solution casting technique. The electrical properties of GNP‐reinforced PVA composites are investigated using a complex impedance spectroscopy (CIS) technique to show the bulk and grain effect with the rise in frequency by an impedance analyzer in a frequency range from 102 to 106 Hz at room temperature. The single semicircle is showing in the complex planes using the real and imaginary impedance characteristics. The GNP‐reinforced PVA composite films show evidence of bulk and grain impact in complicated impedance analysis. Based on the Nyquist plot, it appeared that only the bulk effects of the resultant composite systems are present.

Responsive organic room-temperature phosphorescence materials for spatial-time-resolved anti-counterfeiting

Stimulus-responsive room-temperature phosphorescence (RTP) materials have gained significant attention for their important optoelectronic application prospects. However, the fabrication strategy and underlying mechanism of stimulus-responsive RTP materials remain less explored. Herein, we present a reliable strategy for achieving pH-responsive RTP materials by integrating poly(vinyl alcohol) (PVA) with carboxylic acid or amino group functionalized terpyridine (Tpy) derivatives. The resulting Tpy derivatives-based RTP materials displayed reversible changes in emission color, intensity, and lifetime of both prompt and delayed emission. Notably, the RTP emission undergoes a significant diminish upon exposure to acid due to the protonation of Tpy units. Taking advantage of the decent RTP emission and pH-responsiveness of these RTP films, a spatial-time-resolved anti-counterfeiting application is demonstrated as a proof-of-concept for largely enhancing the security level. This study not only provides new prospects for developing smart RTP materials but also promotes the advancement of optical anti-counterfeiting applications.

Kappa-carrageenan and sodium alginate-based pH-responsive hydrogels for controlled release of methotrexate.

Despite remarkable progress in medical sciences, modern man is still fighting the battle against cancer. In 2022, only in the USA, 640 000 deaths and 2 370 000 patients were reported because of cancer. Chemotherapy is the most widely used for cancer treatments. However, chemotherapeutics have severe physicochemical side effects. Therefore, we have prepared poly(amididoamine) dendrimeric carrageenan (CG), sodium alginate (SA) and poly(vinyl alcohol) (PVA) hydrogels by using solution casting methodology. The constituents of hydrogels were cross-linked by mutable quantity of 3-aminopropyl(diethoxy)methyl silane (APDMS). Hydrogels were characterized by Fourier transform infrared spectroscopy, thermal gravimetric analysis, scanning electron microscope and atomic force microscopy. Hydrogels exhibited higher swelling volumes in 5-7 pH range. In vitro biodegradation in ribonuclease-A solution and cytocompatibility analysis against DF-1 fibroblasts established their biodegradable and non-toxic nature, which enables them as a suitable carrier for chemotherapeutic compounds. Hence, methotrexate (MTX) as a model drug was loaded on CAP-8 hydrogel and its release was detected by the UV-visible spectrophotometer in phosphate-buffered saline (PBS) solution. In 13.5 h, 81.25% and 77.23% of MTX were released at pH 7.4 (blood pH) and 5.3 (tumour pH) in PBS, respectively. MTX was released by super case II mechanism and best fitted to zero-order and Korsmeyer-Peppas model. The synthesized APDMS cross-linked CG/SA/PVA dendrimeric hydrogels could be an efficient model platform for the effective delivery of MTX in cancer treatments.

Fabrication and Characterization of Non-Conventional Starch Based Biofilms Employing Different Plasticizers

Increasing stress on environmental awareness has promoted the use of alternative strategies for common petrochemical based plastic sources to environmentally friendly biofilms and packaging materials. Food by products and underutilised indigenous plants sources are rich in biopolymers which can naturally decompose. The present study focusses on preparations of bioplastics from unconventional starch sources of litchi seed and churkha tuber as novel initiative to combat environmental pollution along with valorisation of undervalued plant sources and agrobased wastes. Ternary blend films of poly vinyl alcohol, starch, plasticizers like (glycerol, sorbitol, mannitol, propylene glycol, polyethylene glycol), citric acid prepared by casting technique produced best result. Comparative study of test samples (TH11, TH12, TH13, TH14 etc) with standardized thin films (TH1, TH2, TH3 etc.) showed variation in appearance, water activity, thickness, since the starch differ in their compositions, gelatinization and gelation time and temperature. High amylose containing litchi seed starch forms firm and more flexible films in comparison to low amylose containing churkha tuber starch. Maximum hygroscopicity was recorded in case of TH1 (77.4%) while thickness was maximum in case of TH12 (0.18 mm). Micro structural analysis clearly showed the nature of crosslinking between starch molecule and different plasticizers. The sensory analysis of food packed with the best among the formularized thin films showed mild change in taste while the other parameters remain same as normal. Better acceptability was in case of TH12 wrapped food rather than TH1. Thus, fabrication of biodegradable packaging is considered as the most sustainable alternative for food preservation. Int. J. Appl. Sci. Biotechnol. Vol 12(1): 29-38.

Comparative Bioactivities of Chemically Modified Fucoidan and λ-Carrageenan toward Cells Encapsulated in Covalently Cross-Linked Hydrogels.

The sulfated marine polysaccharides, fucoidan and λ-carrageenan, are known to possess anti-inflammatory, immunomodulatory, and cellular protective properties. Although they hold considerable promise for tissue engineering constructs, their covalent cross-linking in hydrogels and comparative bioactivities to cells are absent from the literature. Thus, fucoidan and λ-carrageenan were modified with methacrylate groups and were covalently cross-linked with the synthetic polymer poly(vinyl alcohol)-methacrylate (PVA-MA) to form 20 wt % biosynthetic hydrogels. Identical degrees of methacrylation were confirmed by 1H NMR, and covalent conjugation was determined by using a colorimetric 1,9-dimethyl-methylene blue (DMMB) assay. Pancreatic beta cells were encapsulated in the hydrogels, followed by culturing in the 3D environment for a prolonged period of 32 days and evaluation of the cellular functionality by live/dead, adenosine 5'-triphosphate (ATP) level, and insulin secretion. The results confirmed that fucoidan and λ-carrageenan exhibited ∼12% methacrylate substitution, which generated hydrogels with stable conjugation of the polysaccharides with PVA-MA. The cells encapsulated in the PVA-fucoidan hydrogels demonstrated consistently high ATP levels over the culture period. Furthermore, only cells in the PVA-fucoidan hydrogels retained glucose responsiveness, demonstrating comparatively higher insulin secretion in response to glucose. In contrast, cells in the PVA-λ-carrageenan and the PVA control hydrogels lost all glucose responsiveness. The present work confirms the superior effects of chemically modified fucoidan over λ-carrageenan on pancreatic beta cell survival and function in covalently cross-linked hydrogels, thereby illustrating the importance of differential polysaccharide structural features on their biological effects.

Water barrier coating of chitosan/poly (vinyl alcohol)/trans-cinnamaldehyde regulated postharvest quality and reactive oxygen species metabolism of ‘Frutica’ tomato (Solanum lycopersicum L.)

The ‘Frutica’ tomato (Solanum lycopersicum L.), a nutritious “king of fruit,” faces restricted marketability in storage. This study focused on enhancing storage longevity and regulating reactive oxygen species (ROS) metabolism in these tomatoes using chitosan (CS), polyvinyl alcohol (PVA), and trans-cinnamaldehyde (CIN) water barrier coatings and investigated their underlying mechanisms. Tomatoes coated with four different coating formulations and uncoated fruit were stored for 30 d at 8 °C and 75% relative humidity. The bioactive films were evaluated for microstructure (scanning electron microscopy; atomic force microscopy), water barrier, and antifungal properties and tested every 5 d for physical and chemical indices, quality, and ROS of the postharvest fruit. The results showed that the addition of CIN increased the structural density, water barrier properties, and Botrytis cinerea resistance of the coatings. The CIN-containing coating significantly improved water loss, firmness, titratable acid (TA) value, color, and appearance; decreased lipid peroxidation; and modulated the ROS scavenging system compared with other treatment groups. Principal component analysis and correlation revealed that the CIN-coated material, characterized by water-barrier properties, contributed positively to the preservation of tomatoes during refrigeration. Water barrier coating facilitates the enzymatic ROS scavenging system in tomatoes, thereby extending their senescence.

Water‐soluble astaxanthin and silver enriched poly(vinyl alcohol)/silk fibroin crosslinking electrospun nanofiber for wound dressing

AbstractThe aim of this work is to fabricate a novel electrospun poly(vinyl alcohol) (PVA)/silk fibroin (SF) nanofibrous membrane containing astaxanthin (ASTA) and silver (Ag) nanoparticles as potential wound dressing. Since ASTA is typically liposoluble, the bioavailability could be greatly enhanced by improving its hydrophilicity. The antioxidant performance of eletrospun membrane is verified by ABTS radical scavenging assays. The beadless fibers could be fabricated at 16 kV when PVA (12, wt%) is blended with SF (6, wt%). In addition, the membrane is carefully chemically crosslinked by comparing the efforts (i.e., mechanical strength and water resistance) of glutaraldehyde dipping and vapor treatment. The morphology of the electrospun membrane is observed by scanning electron microscopy and optical microscope. The formation of Ag nanoparticles, which provides the membranes antibacterial properties, is also confirmed by energy dispersive spectroscopy and inhibition zone test. Meanwhile, the PVA/SF/ASTA/Ag compound membrane is characterized by Fourier transform infrared spectroscopy, x‐ray diffraction, thermo gravimetric analysis, differential thermal analysis, and water contact angle. The releasing of ASTA is also measured, and kinetic data are adjusted by Higuchi models. Finally, the biocompatibility is confirmed by in vitro cell staining experiments and in vivo rat models.