Vibrational Frequency Shifts Research Articles

Effect of the electronic properties of the side charges of neutral solvent molecules on the charges of the N and H atoms of the carbazole molecule: IR experiment and DFT calculations

The IR spectral parameters of the absorption band of the valence vibration of the NH bond of the carbazole molecule in several neutral solvents (n-hexane C6H14, carbon tetrachloride CCl4, chloroform CHCl3, benzene C6H6) have been measured. It has been experimentally established that the position of the maximum of the NH vibrational band of the carbazole molecule in solvents undergoes a low-frequency shift relative to the gas phase. This shift increases in the series C6H14, CCl4, CHCl3, C6H6. The change in the magnitude of the linear shift is well described by the Kirkwood-Bauer-Magat KBM ratio in C6H14, CCl4, CHCl3. The presence of a linear shift may indicate that only universal interactions take place. The deviation of this ratio of shift magnitude for carbazole in benzene is interpreted as a manifestation of intermolecular complexation. Quantum-chemical calculations of the position of the absorption band position of the valence vibration of the NH bond of the carbazole molecule in these solvents, carried out by the electron density functional method B3LYP/6-31G using the Gaussian 09W program package, also showed a low-frequency shift relative to the gas phase.It was found that for the carbazole molecule in the condensed phase relative to the gas phase the following effects of changing the magnitude of charges on atoms N13 and H14 take place: 1 – increase in the positive sign of the charge on both atoms; 2 – the change in charge magnitude is larger on the nitrogen atom than on the hydrogen atom for both solvents (whose molecules have a dipole moment ∼0: C6H14, CCl4); 3 – the chlorine containing environment has a greater effect on the charge change in the carbazole molecule than the proton containing environment (whose molecules have a dipole moment ∼0: C6H14, CCl4).The correlation between the change of charges on atoms N13 and H14 with the value of electronegativity ξ of the side solvent atoms was established.Thus, it is shown that the charges on the 13N and 14H atoms of the carbazole molecule undergo changes in the presence of universal interactions, and the magnitude of the charge change depends on the electronic properties of the side atoms of the nearest solvent molecules. A hypothesis is proposed to explain the different frequency shift of the NH vibrational frequency of the molecule for chlorine-containing and hydrogen-containing side atoms of neutral solvent molecules, which takes into account different values of ξ for nitrogen and hydrogen atoms.

Electric Field Influence on CO Clathrate Hydrates.

We consider carbon monoxide (CO) confined in the hydrogen-bonded building blocks of sI and sII clathrate hydrates, viz., (512, 51262, 51264) cages, within the density functional theory-based calculations. We study their response to the applied electric fields in terms of changes in the geometrical parameters, dipole moment, HOMO-LUMO gap, and vibrational frequency shift. We examine the stability of CO clathrate hydrate building block cages and identify a possible indication of the field-induced release of CO.

Probing the Electric Field Response of a Water Molecule Confined in Small Carbon Nanocages: A Density Functional Theory Investigation.

We consider a water molecule under tight confinement in the small-sized fullerenes (C28, C30, C32) within the density functional theory (DFT) calculations with suitable exchange-correlation functionals. Such nanoscopic molecular cages provide an ideal setup to study their characteristic properties not present in the condensed phase. The water molecule entirely loses its feature of typical water when it is confined in small fullerenes of size equal to C30or smaller, in which the asymmetric O-H stretching vibration occurs at a lower wavenumber than the symmetric stretching. We study the response of the confined water molecule to the applied electric fields in terms of change in geometrical parameters, NMR spin-spin coupling constants, dipole moment, HOMO-LUMO (HL) gap, and vibrational frequency shift. The electric field shielding property of small-sized fullerene cages is explored and found to be strongly correlated with the HL gap. Since the electric field modulates the gap to decrease generally, shielding efficiency varies with field strength, thereby making large fields better shielded than small fields for the small penetration factor at large fields. The results that hold significance for technological applications are discussed.

(Invited) Controlling Electric Fields and Hydration at Electrochemical Junctions Using Surfactants

Tuning the electrostatics and the water structure at the nm and sub-nm scales are two important frontiers towards the broader goal of controlling reactivity at interfaces. Surfactants offer a way to influence both the electrostatics and hydration of an electrochemical interface. Here we report measurements of local electric fields generated between layers of surfactants and an electrode without application of an external potential. We estimate the value of the electric field by measuring the vibrational frequency shift of a well-defined Stark probe that is adsorbed on the electrode. The field generated by the common quaternary ammonium surfactants in aqueous media is estimated to be in the order of 1 V/nm. We show that modest quantities of surfactants (50 mM) can produce polarizing fields similar to those produced by an electrode poised at -0.8 V vs. Ag/AgCl. Furthermore, we show that under electrochemical conditions, surfactants offer a way of modulating the water content near the electrode. In a mixture of water and DMSO, there are two forces that act upon the surfactants to drive them to the interface: they hydrophobic forces and the electrostatic forces from the electrode. We measure the surfactants at the interface as a function of these variables using surface enhanced IR spectroscopy, and arrive at quantitative comparisons between these two effects. These results help in understanding the design principles of modifying interfacial reactions via tailored surfactants.

Large Local Internal Stress in an Elastically Bent Molecular Crystal Revealed by Raman Shifts.

The structural dynamics involved in the mechanical flexibility of molecular crystals and the internal stress in such flexible materials remain obscure. Here, the study reports an elastically bending lipidated molecular crystal that shows systematic shifts in characteristic vibrational frequencies across the bent crystal region - revealing the nature of structural changes during bending and the local internal stress distribution. The blueshifts in the bond stretching modes (such as C═O and C-H modes) in the inner arc region and redshifts in the outer arc region of the bent crystals observed via micro-Raman mapping are counterintuitive to the bending models based on intermolecular hydrogen bonds. Correlating these shifts with the trends observed from high-pressure Raman studies on the crystal reveals the local stress difference between the inner arc and outer arc regions of the bent crystal to be ≈2GPa, more than an order of magnitude higher than the previously proposed value in elastically bending crystals. High local internal stress can have direct ramifications on the properties of molecular piezoelectric energy harvesters, actuators, semiconductors, and flexible optoelectronic materials.

Infrared Reflection-Absorption Spectroscopy (IRRAS) applied to oxides: Ceria as a case study

Infrared Reflection-Absorption Spectroscopy (IRRAS), a pivotal tool in the study of the surface chemistry of metals, has recently also gained substantial impact for oxide surfaces, despite the inherent challenges originating from their dielectric properties. This review focuses on the application of IRRAS to ceria (CeO2), a metal oxide for which a significant amount of experimental data exists. We elaborate on the differences in optical properties between metals and metal oxides, which result in lower intensity of adsorbate vibrational bands by approximately two orders of magnitude and polarization-dependent shifts of vibrational frequencies. We examine how the surface selection rule, governing IR spectroscopy of adsorbates on metals, contrasts sharply with the behavior of dielectrics where both positive and negative vibrational bands can occur, and how IRRAS can capture vibrations with transition dipole moments oriented parallel to the surface—a capability not feasible on metallic surfaces. Finally, this paper explores the broader implications of these findings for enhancing our understanding of molecule interactions on oxide surfaces, and for using IR spectroscopy for operando studies under technologically relevant conditions.

Nonlinear optical properties of KnCl (n = 2–7) superalkali clusters

The lowest energy structures along with the low lying isomer, stabilities, electronic properties, optical properties and nonlinear optical responses of KnCl (n = 2–7) clusters were studied within the density functional theory. The second order energy difference, dissociation energy and GH-L (HOMO–LUMO gap) point out that KnCl (n = 3, 5, 7) clusters are more stable. The calculated adiabatic ionization energies (AIE) for the KnCl (n = 2–6) clusters are in agreement with the measured ionization energies. The optical properties, namely optical electronegativity and refractive index, depends on the GH-L energy values. The K atom capped planar rhombus geometry of the K4Cl causes the noticeable vibrational frequency shift compared to the rest of IR spectra of the clusters. The first static hyperpolarizability (β o) values are in the range of 2.33 × 103 –2.87 × 104 au and the second static hyperpolarizability varies between 5.74 × 106 au and 38.9 × 106 au for the cluster. The nonlinear optical response is due to the superalkali nature of KnCl (n = 2–7) clusters. From computed β vec values, the hyperpolarizability has projection on the dipole moment vector for the superalkalis except the K2Cl and K5Cl. The absorption spectra point out that KnCl (n = 6–7) clusters can be suitable as a NLO material since they have transparency in the deep UV region (λ< 300 nm).

Molecular Hydrogen Acts as a Hydrogen Bond Proton Acceptor: From Protonated Betaine Tagging to the Weakest Hydrogen Bond.

In an attempt to gain further insights into the intermolecular interactions implied by Rizzo's group's cautionary tale related to molecular tagging in infrared multiple photon dissociation (IRMPD) spectroscopy with molecular messengers [Masson, A. . J. Chem. Phys. 2015, 143, 104313], in the present study, we provide an in-depth analysis of the noncovalent interaction between the molecular hydrogen and protonated betaine molecule in the gas phase. We aim to shed some new light on the fundamental issues concerning the wide diapason of hydrogen-bonding-type intermolecular interactions, with a wide variety of proton acceptors. We demonstrate that in the course of tagging the protonated betaine with molecular hydrogen from the OH group side, it is the σ bond of molecular hydrogen that plays the role of hydrogen-bonding proton acceptor. The tagging thus induces a small yet significant red shift of the protonated betaine O-H stretching mode. We investigate the performance of a wide range of density functional theory (DFT) functionals for the calculation of anharmonic vibrational frequency shifts of the studied system, which are essential for the correct interpretation of the experimental IRMPD data. For an accurate prediction of the OH stretching frequency shifts, specifically designed functionals such as Handy's group HCTH/407 should be applied. The empirical dispersion correction enhances the systematic overestimation of the anharmonic frequency shift, characteristic of the most widely used DFT functionals. Combining the full-wave function approach with the charge field perturbation and natural bond orbital (NBO) deletion analyses, we demonstrate that the frequency shift in the OH-tagged structure is governed by the σHH → σ*OH intermolecular charge transfer. This interaction stabilizes the OH-tagged dimer as well, in contrast to the dipole-quadrupole electrostatic interaction energy term. Topological analysis of the electron density reveals the presence of an intermolecular bond critical point with a positive value of the density Laplacian very close to the lower limit for hydrogen bonds. NCI analyses demonstrate that the OH···H2 interaction is weaker than the intramolecular CH···O one within the protonated betaine molecule, with the through of reduced density gradient appearing at less negative sign(λ2)·ρ values. Analyzing the O-H stretching vibrational potential with the second-generation absolutely localized molecular orbitals energy decomposition analysis (ALMO-EDA 2) revealed that in the case of betaineH(+) tagged from the OH group side, the permanent electrostatics (ΔEelec), polarization (ΔEpol), and charge-transfer (ΔEct) contributions to the total intermolecular interaction energy contribute favorably to the weak hydrogen bond formation and to the red shift of the fundamental O-H stretching frequency, the ΔEct contribution being the most significant in the last context. The Pauli repulsion term, on the other hand, favors an O-H stretching frequency blue shift as a consequence of the vibrational confinement effects.

Comparative analysis between data-driven and visual-based approach in drone propeller imbalance detection

Early monitoring of the drone’s critical components, such as the motor, propeller, and electronic speed controller (ESC), can prevent unwanted accidents from happening to the drone. A failure of one of the drone’s components may lead the drone to crash. The fault detection approach can be made by analyzing certain parameters such as vibration, acoustic, current, and speed. In this paper, a comparative analysis between data-driven and visual-based approaches in detecting an imbalanced propeller in the drone is presented. The analysis will focus on vibration and acoustic parameters, with the use of CZN-15 and ADXL335 MEMS sensors to capture vibration and acoustic data, respectively. The Silky EvCam vibration camera will be used for the visual-based approach. Experimental results demonstrated that both data-driven and visual-based approaches could detect the imbalanced UAV propeller. There is a shift of vibration frequency when imbalances occur in the UAV propeller. However, in the ground and thrust modes, the acoustic-based method has an accuracy of 54% and 93%, respectively, which is lower compared to the vibration-based (100% accuracy in both modes) and visual-based techniques.

COMPLEXES OF WATER-SOLUBLE LOCAL PLANT POLYPHENOL DERIVATIVES AND THEIR BIOLOGICAL ACTIVITY

The article is devoted to obtaining water-soluble complexes of iminoazo derivatives of gossypol, studying their physicochemical properties and biological activity. Aromatic, heterocyclic amines and sulfanilamide preparations were used as amine components in obtaining iminoazo derivatives of gossypol and their water-soluble complexes. The maximum values of wavelengths and the corresponding optical densities were determined in the UV spectra of compounds in acetone solvent. In order to determine the structure of the compounds, the infrared spectrum was taken and analyzed: the shift of the fundamental vibrational frequencies up to 31 cm-1 showed that the water-poly-N-vinylpyrrolidone in the compound is connected to a lesser extent as a result of hydrogen bonding. Obtaining complexes of azoderivatives of gossypol imines with poly-N-vinylpyrrolidone is related to the multi-functionality of the reactive groups of the ligand compound; formed hydrogen bonds due to the oxygen of the cycloamide group. For the first time, six new water-soluble complexes iminoazo derivatives of gossypol with poly-N-vinylpyrrolidone were obtained. The results of determination of interferon-inducing activity of compounds were analyzed. The activity was compared with the effectiveness of azo-, iminoazo derivatives of gossypol. According to the obtained results, it was shown that the effectiveness of water-soluble complexes iminoazo derivatives of gossypol.

Monolayers of a thiacalix[3]pyridine-supported molybdenum(0) tricarbonyl complex on Au(111): characterisation with surface spectroscopy and scanning tunneling microscopy.

Deposition of dome-shaped metal-organic complexes on metallic surfaces to produce well-defined single site catalysts is a novel approach combining aspects of homogeneous and heterogeneous catalysis. In order to investigate the bonding of small molecules to such systems, a molybdenum(0) tricarbonyl complex supported by a thiacalix[3]pyridine is synthesized and deposited on Au(111) and Ag(111) surfaces by vacuum evaporation. The resulting mono- and submonolayers are investigated with surface spectroscopy and STM. All of these methods indicate a parallel orientation of the molybdenum complex with respect to the surface. The vibrational properties and frequency shifts of the adsorbed complexes with respect to the bulk are evaluated with the help of conventional IR and IRRA spectroscopy, coupled to DFT calculations. Compared to a similar Mo(0) tricarbonyl complex supported by an azacalixpyridine ligand, the title complex exhibits a higher stability in the bulk and adsorbed to surfaces which goes along with a lower reactivity towards oxygen.

Optical spectroscopy of the previously unobserved palladium monosulfide (PdS) radical.

The optical spectra of the palladium monosulfide (PdS) molecule in gas phase have been investigated for the first time through laser-induced fluorescence (LIF) and single-vibronic-level (SVL) emission spectroscopies. The I3Σ- - X3Σ- transition system containing 16 vibronic bands was identified in the LIF spectra, covering the energy range of 22 030-23 400cm-1. The spectra with rotational resolution allowed for the determination of the molecular constants in both the ground X and excited I electronic states, involving the spin-orbit splitting, rotational constant, vibrational frequency, and isotope shift. Isotopically resolved SVL emission spectra permitted the observation of the spin-orbit splitting, vibrational frequency, and vibrational isotope shift of the X3Σ-0+,1 and A3Π2,1,0-,0+ states as they transitioned from the excited I state to the vibrational levels of the X and A states. Ab initio calculations presented plenty of the Λ-S and Ω states of PdS below 28 000cm-1 and provided strong support for the assignments of the experimental observation.

Femtosecond Electron-Transfer Dynamics across the D2O/Cs+/Cu(111) Interface: The Impact of Hydrogen Bonding.

Hydrogen bonding is essential in electron-transfer processes at water-electrode interfaces. We study the impact of the H-bonding of water as a solvent molecule on real-time electron-transfer dynamics across a Cs+-Cu(111) ion-metal interface using femtosecond time-resolved two-photon photoelectron spectroscopy. We distinguish in the formed water-alkali aggregates two regimes below and above two water molecules per ion. Upon crossing the boundary of these regimes, the lifetime of the excess electron localized transiently at the Cs+ ion increases from 40 to 60 fs, which indicates a reduced alkali-metal interaction. Furthermore, the energy transferred to a dynamic structural rearrangement due to hydration is reduced from 0.3 to 0.2 eV concomitantly. These effects are a consequence of H-bonding in the water-water interaction and the beginning formation of a nanoscale water network. This finding is supported by real-space imaging of the solvatomers and vibrational frequency shifts of the OH stretching and bending modes calculated for these specific interfaces.

Efficient Prediction of Mole Fraction Related Vibrational Frequency Shifts.

While so far it has been possible to calculate vibrational spectra of mixtures at a particular composition, we present here a novel cluster approach for a fast and robust calculation of mole fraction dependent infrared and vibrational circular dichroism spectra at the example of acetonitrile/(R)-butan-2-ol mixtures. By assigning weights to a limited number of quantum chemically calculated clusters, vibrational spectra can be obtained at any desired composition by a weighted average of the single cluster spectra. In this way, peak positions carrying information about intermolecular interactions can be predicted. We show that mole fraction dependent peak shifts can be accurately modeled and, that experimentally recorded infrared spectra can be reproduced with high accuracy over the entire mixing range. Because only a very limited number of clusters is required, the presented approach is a valuable and computationally efficient tool to access mole fraction dependent spectra of mixtures on a routine basis.

Electro-inductive Effect Dominates Vibrational Frequency Shifts of Conjugated Probes on Gold Electrodes.

Interfacial electric fields play a critical role in electrocatalysis and are often characterized by using vibrational probes attached to an electrode surface. Understanding the physical principles dictating the impact of the applied electrode potential on the vibrational probe frequency is important. Herein, a comparative study is performed for two molecular probes attached to a gold electrode. Both probes contain a nitrile (CN) group, but 4-mercaptobenzonitrile (4-MBN) exhibits continuous conjugation from the electrode through the nitrile group, whereas this conjugation is interrupted for 2-(4-mercaptophenyl)acetonitrile (4-MPCN). Periodic density functional theory calculations predict that the CN vibrational frequency shift of the 4-MBN system is dominated by induction, which is a through-bond polarization effect, leading to a strong potential dependence that does not depend significantly on the orientation of the CN bond relative to the surface. In contrast, the CN vibrational frequency shift of the 4-MPCN system is influenced less by induction and more by through-space electric field effects, leading to a weaker potential dependence and a greater orientation dependence. These theoretical predictions were confirmed by surface-enhanced Raman spectroscopy experiments. Balancing through-bond and through-space electrostatic effects may assist in the fundamental understanding and design of electrocatalytic systems.

Synthesis, characterization, antibacterial properties, mode of action and molecular docking studies of copper pyridyl complexes against drug-resistant bacteria

A series of four new copper complexes containing pyridyl-based ligands of the type [Cu(Cl)2(L)2] were prepared by solid-state methods and evaluated for antibacterial activity. Their elemental analysis showed that the grinding method produced pure complexes. FTIR spectroscopy confirmed the coordination of ligands to copper ions by identifying shifts in vibrational frequencies. Furthermore, their successful synthesis was confirmed by the coordinating bonds being shifted to lower frequencies. Electronic spectra and magnetic susceptibility data proved the complexes to be d9 tetrahedral complexes. Thermal studies of the copper complexes indicated that they had good thermal stability. In the thermal analysis, a recurring pattern emerges as each copper complex experiences multiple mass losses and exhibits characteristic transitions in DSC profiles, shedding light on their distinct thermal behaviors. The mass spectra of the copper complexes showed that the data agreed with the elemental analysis and other elucidation techniques. The complexes displayed characteristic molecular ion peaks and adducts consistent with their calculated masses, substantiating the successful synthesis of these complexes and enhancing understanding of their composition and stability. The copper complexes also displayed solubility in highly polar and heavy solvents thus reduced the chances of forming good-quality crystals. The copper complexes were more effective against Gram-positive bacteria, with CuL4 performing best, notably against MRSA and S. aureus. All of the active complexes were bacteriostatic against MRSA and S. aureus based on the time kill kinetics. Additionally, it was shown that the CuL4 and Cu4PY-H disrupted the S. aureus cell membrane more effectively than the AgSD control. Finally, the CuL4 membrane disruption studies were not significantly different to the AgSD control on MRSA. The results of cell membrane disruption were supported by molecular docking scores, where CuL4 outperformed the other active compounds, and the trends corroborated the experimental results.

Spectra of Rg-water dimers in the region of the D2O ν3 asymmetric stretch (Rg = Ar, Kr, Xe)

Spectra of rare gas (Rg) – D2O dimers (Rg = Ar, Kr, Xe) are studied in the region of the D2O ν3 asymmetric stretch (≈2800 cm−1), using a rapid-scan tunable infrared optical parametric oscillator source to probe a pulsed supersonic slit jet expansion. Three bands are observed in each case, labelled according to the D2O rotational transition with which they correlate as: Σ(101) ← Σ(000), Π(101) ← Σ(000), and Σ(000) ← Σ(101). The Ar-D2O bands exhibit various perturbations and line broadening effects. For Kr-D2O, the Π(101) ← Σ(000) and Σ(000) ← Σ(101) bands are simple and relatively unperturbed with almost no resolved Kr isotope structure, while the Σ(101) ← Σ(000) band is highly perturbed and shows large isotope splittings. This latter perturbation is analyzed in detail with good results. For Xe-D2O, the experimental spectra are unfortunately weaker. Analysis of the Π(101) ← Σ(000) and Σ(000) ← Σ(101) bands is again relatively straightforward, but the Σ(101) ← Σ(000) band is even more perturbed than for Kr-D2O and its analysis proves impossible. Line broadening (for Ar-D2O) and vibrational frequency shift effects are described.

Machine Learning Approach Based on a Range-Corrected Deep Potential Model for Efficient Vibrational Frequency Computation.

As an ensemble average result, vibrational spectrum simulation can be time-consuming with high accuracy methods. We present a machine learning approach based on the range-corrected deep potential (DPRc) model to improve the computing efficiency. The DPRc method divides the system into "probe region" and "solvent region"; "solvent-solvent" interactions are not counted in the neural network. We applied the approach to two systems: formic acid C═O stretching and MeCN C≡N stretching vibrational frequency shifts in water. All data sets were prepared using the quantum vibration perturbation approach. Effects of different region divisions, one-body correction, cut range, and training data size were tested. The model with a single-molecule "probe region" showed stable accuracy; it ran roughly 10 times faster than regular deep potential and reduced the training time by about four. The approach is efficient, easy to apply, and extendable to calculating various spectra.

(Invited) Efficient Inner-to-Outer Wall Energy Transfer in Highly Pure Double-Wall Carbon Nanotubes Revealed by Detailed Spectroscopy

The coaxial stacking of two single-wall carbon nanotubes (SWCNTs) into a double-wall carbon nanotube (DWCNT), forming a so-called one-dimensional van der Waals structure, leads to synergetic effects that dramatically affect the optical and electronic properties of both layers [1]. In this work, we explore these effects in purified DWCNT samples by combining absorption, wavelength-dependent infrared fluorescence−excitation (PLE), and wavelength-dependent resonant Raman scattering (RRS) spectroscopy. Purified DWCNTs are obtained by careful solubilization that strictly avoids ultrasonication [2] or by electronic-type sorting [3], both followed by a density gradient ultracentrifugation to remove unwanted SWCNTs that could obscure the DWCNT characterization [2]. Chirality-dependent shifts of the radial breathing mode vibrational frequencies and transition energies of the inner and outer DWCNT walls with respect to their SWCNT analogues are determined by advanced two-dimensional fitting of RRS and PLE data of DWCNT and their reference SWCNT samples. This exhaustive data set verifies that fluorescence from the inner DWCNT walls of well-purified samples is severely quenched, as previously evidenced in single-tube experiments [4]. Moreover, we find that this quenching occurs through efficient energy transfer from the inner to the outer DWCNT walls [5]. Combined analysis of the PLE and RRS results further reveals that this transfer is dependent on the inner and outer wall chirality, and we identify the specific combinations dominant in our DWCNT samples. These obtained results demonstrate the necessity and value of a combined structural characterization approach including PLE and RRS spectroscopy for bulk DWCNT samples.[1] S. Cambré et al, Small 2021, 17, 2102585[2] M. Erkens et al, Carbon 2021, 185, 113[3] H. Li et al, Nature Nanotechnol. 2017, 12, 1176[4] D. Levshov et al, Phys. Rev. B 2017, 96, 195410[5] M. Erkens et al, ACS Nano 2022, 16, 16038

(Invited) Observation of Free Carriers in Non-Fullerene Acceptors with Broadband Mid-Infrared Transient Absorption Spectroscopy

Non-fullerene acceptors (NFAs) are attracting much attention as a material for efficient organic photovoltaics (OPVs). However, the photoinduced dynamics of NFAs has yet to be fully revealed. It is still questionable whether free carriers can be generated in the film consisting of the stacking of small NFA molecules. Transient absorption (TA) spectroscopy is a powerful method to investigate photoexcited states with ultrafast time resolution. TA spectroscopy in the visible and NIR region enables us to observe strongly bound photoexcitation states, but cannot detect free carriers. On the other hand, broadband MIR TA measurement makes it possible to observe free carriers. However, this is not commonly employed for the study of OPV. Herein, we investigated the photoexcited dynamics in the film of ITIC, one of the most well-known NFAs, by using MIR to visible TA measurement. In the MIR TA spectra, a peak around 3100 cm-1 and a broader component extending to lower energy region were observed. The latter broadband component got increased by blending ITIC with a donor, suggesting that this can be attributed to free carriers generated by charge separation. The observation of the vibrational frequency shift of CN group also supported the charge separation in the ITIC film. This study highlights the utility of MIR-TA spectroscopy in the study of OPVs.