Viability Of Encapsulated Cells Research Articles

The BAM‐GelMA‐ADSCs bilayer patch promotes tissue regeneration and functional recovery after large‐area bladder defects in beagles

AbstractPrevious studies of bladder tissue engineering simply seeded cells onto the surface of the material, which makes the cells lack protection and makes it difficult to face the complex in vivo environment. The gelatin methacryloyl (GelMA) hydrogel possesses outstanding biocompatibility and distinctive photo‐crosslinking characteristics and is capable of offering a suitable three‐dimensional growth environment for cells. This study explored the optimal concentration of GelMA for encapsulating adipose‐derived stem cells (ADSCs) and combined it with bladder acellular matrix (BAM) to create a tissue‐engineered bladder patch. Results indicated that 10% GelMA more effectively promoted ADSCs proliferation and spreading compared to 7.5% and 12.5% concentrations, which can offer a better extracellular matrix environment for cells. BAM performed as an excellent substrate with mechanical properties and stitchability similar to natural tissues. Animal experiments demonstrated that the encapsulated ADSCs in GelMA enhanced patch vascularization in vivo and BAM‐GelMA‐ADSCs tissue‐engineered bladder patch can repair large‐scale bladder defects in beagles and promote bladder tissue regeneration and functional recovery. This photocrosslinking hydrogel‐acellular matrix patch provides a protective semi‐controlled environment for ADSCs, supporting the growth and viability of encapsulated cells in vivo, while being easy to suture and preventing leakage, and has significant clinical potential.

Cardiac Matrix-Derived Granular Hydrogel Enhances Cell Function in 3D Culture.

Hydrogels derived from decellularized porcine myocardial matrix have demonstrated significant potential as therapeutic delivery platforms for promoting cardiac repair after injury. Our previous study developed a fibrin-enriched cardiac matrix hydrogel to enhance its angiogenic capacities. However, the bulk hydrogel structure may limit their full potential in cell delivery. Recently, granular hydrogels have emerged as a promising class of biomaterials, offering unique features such as a highly interconnected porous structure that facilitates nutrient diffusion and enhances cell viability. Several techniques have been developed for fabricating various types of granular hydrogels, among which extrusion fragmentation is particularly appealing due to its adaptability to many types of hydrogels, low cost, and high scalability. In this study, we first confirmed the effects of the bulk cardiac matrix hydrogel on the viability of encapsulated human umbilical vein endothelial cells and human mesenchymal stem cells. We then tested the feasibility of producing granular hydrogels from both cardiac matrix and fibrin-enriched cardiac matrix through cellular cross-linking of microgels fabricated by extrusion fragmentation. Afterward, we examined the roles of the produced granular hydrogels in the embedded cells and cell spheroids. Our in vitro data demonstrate that cardiac matrix-derived granular hydrogels support optimal viability of encapsulated cells and promote sprouting of human mesenchymal stem cell spheroids. Additionally, granular hydrogel derived from fibrin-enriched cardiac matrix accelerates angiogenic sprouting of embedded human mesenchymal stem cell spheroids. The results obtained from this study lay an important foundation for the future exploration of using cardiac matrix-derived granular hydrogels for cardiac cell therapy.

Magneto-Enzymatic Microgels for Precise Hydrogel Sculpturing.

The inclusion of hollow channels in tissue-engineered hydrogels is crucial for mimicking the natural physiological conditions and facilitating the delivery of nutrients and oxygen to cells. Although bio-fabrication techniques provide diverse strategies to create these channels, many require sophisticated equipment and time-consuming protocols. Herein, collagenase, a degrading agent for methacrylated gelatin hydrogels, and magnetic nanoparticles (MNPs) are combined and processed into enzymatically active spherical structures using a straightforward oil bath emulsion methodology. The generated microgels are then used to microfabricate channels within biomimetic hydrogels via a novel sculpturing approach that relied on the precise coupling of protein-enzyme pairs (for controlled local degradation) and magnetic actuation (for directional control). Results show that the sculpting velocity can be tailored by adjusting the magnetic field intensity or concentration of MNPs within the microgels. Additionally, varying the magnetic field position or microgel size generated diverse trajectories and channels of different widths. This innovative technology improves the viability of encapsulated cells through enhanced medium transport, outperforming non-sculpted hydrogels and offering new perspectives for hydrogel vascularization and drug/biomolecule administration. Ultimately, this novel concept can help design fully controlled channels in hydrogels or soft materials, even those with complex tortuosity, in a single wireless top-down biocompatible step.

Gravity-Oriented Microfluidic Device for Biocompatible End-to-End Fabrication of Cell-Laden Microgels.

Droplet microfluidics are extensively utilized to generate monodisperse cell-laden microgels in biomedical applications. However, maintaining cell viability is still challenging due to overexposure to harsh conditions in subsequent procedures that recover the microgels from the oil phase. Here, a gravity-oriented microfluidic device for end-to-end fabrication of cell-laden microgels is reported, which integrates dispersion, gelation, and extraction into a continuous workflow. This innovative on-chip extraction, driven by native buoyancy and kinetically facilitated by pseudosurfactant, exhibits 100% retrieval efficiency for microgels with a wide range of sizes and stiffnesses. The viability of encapsulated cells is perfectly maintained at ≈98% with minimal variations within and between batches. The end-to-end fabrication remarkably enhances the biocompatibility and practicality of microfluidics-based cell encapsulation and is promising to be compatible with various applications ranging from single-cell analysis to clinical therapy.

Development of Human-Derived Photocrosslinkable Gelatin Hydrogels for Tissue Engineering.

Hydrogels are often used as biomimetic matrices for tissue regeneration. The source of the hydrogel is of utmost importance, as it affects the physicochemical characteristics and must be carefully selected to stimulate specific cell behaviors. Naturally derived polymeric biomaterials have inherent biological moieties, such as cell binding and protease cleavage sites, and thus can provide a suitable microenvironment for cells. Human-derived matrices can mitigate potential risks associated with the immune response and disease transmission from animal-derived biomaterials. In this article, we developed glycidyl methacrylate-modified human-derived gelatin (hGelGMA) hydrogels for use in tissue engineering applications. By adjusting the glycidyl methacrylate concentration in the reaction mixture, we synthesized hGelGMA with low, medium, and high degrees of modification referred to as hGelGMA-L, hGelGMA-M, and hGelGMA-H, respectively. The amount of polymeric networks in the hydrogels was increased proportionally with the degree of modification. This change has resulted in a decreasing trend in pore size, porosity, and consequent swelling ratio. Similarly, increasing the polymer concentration also exhibited slower enzymatic degradation. On the other hand, increasing the polymer concentration led to an improvement in mechanical properties, where the compressive moduli of hGelGMA-L, hGelGMA-M, and hGelGMA-H hydrogels have changed at 2.9 ± 1.0, 13.7 ± 0.9, and 26.4 ± 2.5 kPa, respectively. The cytocompatibility of hGelGMA was assessed by 3D encapsulation of human-derived cells, including human dermal fibroblasts (HDFs) and human mesenchymal stem cells (hMSCs), in vitro. Regardless of the degree of glycidyl methacrylate modification, the hGelGMA hydrogels preserved the viability of encapsulated cells and supported their growth and proliferation. HDF cells showed a higher metabolic activity in hGelGMA-H, while MSCs exhibited an increased metabolic activity when they were encapsulated in hGelGMA-M or hGelGMA-H. These results showed that photocrosslinkable human-derived gelatin-based hydrogels can be synthesized and their physical properties can be distinctly fine-tuned to different extents as a function of their degrees of modification depending on the needs of the target tissue. Due to its promising physical and biological properties, it is anticipated that hGelGMA can be utilized in a wide spectrum of tissue engineering applications.

Nanocrystalline Cellulose as a Versatile Engineering Material for Extrusion-Based Bioprinting.

Naturally derived polysaccharide-based hydrogels, such as alginate, are frequently used in the design of bioinks for 3D bioprinting. Traditionally, the formulation of such bioinks requires the use of pre-reticulated materials with low viscosities, which favour cell viability but can negatively influence the resolution and shape fidelity of the printed constructs. In this work, we propose the use of cellulose nanocrystals (CNCs) as a rheological modifier to improve the printability of alginate-based bioinks whilst ensuring a high viability of encapsulated cells. Through rheological analysis, we demonstrate that the addition of CNCs (1% and 2% (w/v)) to alginate hydrogels (1% (w/v)) improves shear-thinning behaviour and mechanical stability, resulting in the high-fidelity printing of constructs with superior resolution. Importantly, LIVE/DEAD results confirm that the presence of CNCs does not seem to affect the health of immortalised chondrocytes (TC28a2) that remain viable over a period of seven days post-encapsulation. Taken together, our results indicate a favourable effect of the CNCs on the rheological and biocompatibility properties of alginate hydrogels, opening up new perspectives for the application of CNCs in the formulation of bioinks for extrusion-based bioprinting.

Phenolated alginate hydrogel induced osteogenic properties of mesenchymal stem cells via Wnt signaling pathway

Osteogenic properties of phenolated alginate (1.2 %) hydrogel containing collagen (0.5 %)/nano-hydroxyapatite (1 %) were studied on human mesenchymal stem cells in vitro. The phenolation rate and physical properties of the hydrogel were assessed using nuclear magnetic resonance (NMR), Fourier-transform infrared spectroscopy (FTIR), Scanning electron microscope (SEM), swelling ratio, gelation time, mechanical assay, and degradation rate. The viability of encapsulated cells was monitored on days 7, 14, and 21 using an MTT assay. Osteoblast differentiation was studied using western blotting, and real-time PCR. Using PCR array analysis, the role of the Wnt signaling pathway was also investigated. Data showed that the combination of alginate/collagen/nanohydroxyapatite yielded proper mechanical features. The addition of nanohydroxyapatite, and collagen reduced degradation, swelling rate coincided with increased stiffness. Elasticity and pore size were also diminished. NMR and FTIR revealed suitable incorporation of collagen and nanohydroxyapatite in the structure of alginate. Real-time PCR analysis and western blotting indicated the expression of osteoblast-related genes such as Runx2 and osteocalcin. PCR array revealed the induction of numerous genes related to Wnt signaling pathways during the maturation of human stem cells toward osteoblast-like cells. In vivo data indicated that transplantation of phenolated alginate/collagen/nanohydroxyapatite hydrogel led to enhanced de novo bone formation in rats with critical-sized calvarial defects. Phenolated alginate hydrogel can promote the osteogenic capacity of human amniotic membrane mesenchymal stem cells in the presence of nanohydroxyapatite and collagen via engaging the Wnt signaling pathway.

An electrospun macrodevice for durable encapsulation of human cells with consistent secretion of therapeutic antibodies

Frequent subcutaneous or intravenous administrations of therapeutic biomolecules can be costly and inconvenient for patients. Implantation of encapsulated recombinant cells represents a promising approach for the sustained delivery of biotherapeutics. However, foreign body and fibrotic response against encapsulation materials results in drastically reduced viability of encapsulated cells, presenting a major engineering challenge for biocompatibility. Here, we show that the multi-laminate electrospun retrievable macrodevice (Bio-Spun) protects genetically modified human cells after subcutaneous implant in mice. We describe here a biocompatible nanofiber device that limits fibrosis and extends implant survival. For more than 150 days, these devices supported human cells engineered to secrete the antibodies: vedolizumab, ustekinumab, and adalimumab, while eliciting minimal fibrotic response in mice. The porous electrospun cell chamber allowed secretion of the recombinant antibodies into the host bloodstream, and prevented infiltration of host cells into the chamber. High plasma levels (>50 μg/mL) of antibody were maintained in the optimized devices for more than 5 months. Our findings demonstrate that macrodevices constructed from electrospun materials are effective in protecting genetically engineered cells for the sustained administration of recombinant therapeutic antibodies.

Mezankimal Kök Hücre Enkapsülasyonu için 3B Baskı ile Makro Kapsül Üretimi

Purpose: Cell transplantation is a widely used method to induce cell-mediated immune reactions inside the body. However, possible immune responses to the transplanted cells decrease the efficiency of applied cell therapy. This issue can be addressed by the transplantation of cells via 3D-printed polymeric capsules which encapsulate cells and protect them from immune system attacks. Cell-loaded capsules (macro or micro) have emerged as potential carriers for more efficacious cellular therapies. In this study, 3D-printed porous capsules were prepared from biodegradable and biocompatible polyester “polycaprolactone (PCL)” and this macro-capsule was evaluated as a carrier for its cell encapsulation effectiveness.
 
 Method: The macro-capsule was designed to have dimensions of 2x5x10 mm and drawn in Autodesk Fusion 360 program. PCL was utilized for its 3D bio-printing via Axolotl Bioprinter Dual Print Head System. Leakage on the closed form of the macro-capsule was visually controlled by surface electron microscopy (SEM). Permeability of the macro-capsule was tested with trypan blue dye and human serum albumin (HSA) protein. Sterilization of the obtained macro-capsule was achieved via UV light and the cytotoxicity of the polycaprolactone capsule was tested for 24 and 72 hour incubation time periods.
 
 Results: The semi-permeable macro-capsule was successfully obtained as closed and hollow form. Its porous structure was demonstrated using trypan blue dye. To evaluate the porosity of the macrocapsule, human serum albumin (HSA) protein release was performed from the macrocapsule. It has been shown that 98% of HSA was released from the macrocapsule within 24 hours. The polycaprolactone (PCL) macrocapsule was sterilized using UV light and was reported to show no in vitro cytotoxicity. In addition, it was shown that the cells in the macro-capsule consumed at least 10% glucose from the outside medium during 12 days of incubation, compared to 2D cell culture conditions, and were able to release at least 8% of the lactic acid molecules outside.
 
 Conclusion: In conclusion, reproducible fabrication of polymer macro-capsule, high viability of encapsulated cells inside, and their metabolic assessment results have obviously indicated the potential of these capsules as effective carriers for living cells with transplantation-dependent cellular therapies.

Microencapsulation of Lactobacillus plantarum LN66 and its survival potential under different packaging conditions

Microcapsules of Lactobacillus plantarum LN66 were prepared to improve the cell viability in simulated gastrointestinal and different packaging conditions. Microcapsules containing Lactobacillus plantarum LN66 were produced by complex coacervation followed by freeze drying and characterised by water activity, moisture content, size, encapsulation efficiency, SEM, FTIR, XRD, as well as the resistance of probiotics to the simulated gastrointestinal tract and storage under different packaging conditions. The microcapsules presented the particle size of 196.57 ± 1.46 μm and the encapsulation efficiency of 75.26 ± 1.95% (w/w). After simulated gastrointestinal conditions, viability of encapsulated cells was 71.33 ± 0.99% (w/w) and 70.39 ± 0.86% (w/w), separately, while that of free cells was only 45.45 ± 0.5% (w/w) and 8.59 ± 0.67% (w/w). Compared with aluminium foil, the viable cells in glass bottles at 4 °C and 25 °C was increased 1.1-fold and 1.4-fold, respectively. Complex coacervation could be considered an appropriate alternative to increase the viability of probiotics.

Material Properties and Cell Compatibility of Photo-Crosslinked Sericin Urethane Methacryloyl Hydrogel.

There is a need to develop novel cytocompatible hydrogels for cell encapsulation and delivery in regenerative medicine. The objective of this work was to synthesize isocyanato ethyl methacryloyl-functionalized sericin and determine its material properties as a natural hydrogel for the encapsulation and delivery of human mesenchymal stem cells (MSCs) in regenerative medicine. Sericin extracted from silk cocoons was reacted with 2-isocyanatoethyl methacrylate (IEM) or methacrylic anhydride (MA) to produce sericin urethane methacryloyl (SerAte-UM) or sericin methacryloyl (SerAte-M, control) biopolymers, respectively. The hydrogels produced by photo-crosslinking of the biopolymers in an aqueous solution were characterized with respect to gelation kinetics, microstructure, compressive modulus, water content, degradation, permeability, and viability of encapsulated cells. The secondary structure of citric acid-extracted sericin was not affected by functionalization with IEM or MA. SerAte-UM hydrogel was slightly more hydrophilic than SerAte-M. The gelation time of SerAte-UM hydrogel decreased with an increasing degree of modification. The photo-polymerized SerAte-UM hydrogel had a highly porous, fibrous, honeycomb microstructure with an average pore size in the 40–50 µm range. The compressive modulus, swelling ratio, and permeability of SerAte-UM hydrogel depended on the degree of modification of sericin, and the mass loss after 21 days of incubation in aqueous solution was <25%. Both SerAte-UM and SerAte-M hydrogels supported viability and growth in encapsulated MSCs. The SerAte-UM hydrogel, with its higher hydrophilicity compared to SerAte-M, is promising as a matrix for encapsulation and delivery of stem cells in tissue engineering.

Pre-glycation impairs gelation of high concentration collagen solutions.

There remains a need for stiffer collagen hydrogels for tissue engineering and disease modeling applications. Pre-glycation, or glycation of collagen in solution prior to gelation, has been shown to increase the mechanics of collagen hydrogels while maintaining high viability of encapsulated cells. The stiffness of glycated collagen gels can be increased by increasing the collagen concentration, sugar concentration, and glycation time. However, previous studies on pre-glycation of collagen have used low collagen concentrations and/or low sugar concentrations and have not investigated the effect of glycation time. Therefore, the objective of this study was to determine the effects of pre-glycation with high sugar concentrations (up to 500 mM) and extended glycation times (up to 21 days) on high concentration collagen (8mg/ml). The addition of sugar to the collagen and the formation of advanced glycation end products (AGEs) were quantified. The ability to gel successfully and rheological properties were determined and correlated with biochemical characterizations. Successful collagen gelation and rheological properties of pre-glycated collagen were found to be strongly dependent on the ratio of added sugars to added AGEs with high ratios impairing gelation and low ratios resulting in optimal storage moduli. There is likely a competing effect during pre-glycation of the formation of AGEs resulting in crosslinking of collagen and the formation of Amadori intermediates acting to increase collagen solubility. Overall, this study shows that collagen glycation can be optimized by increasing the formation of AGEs while maintaining a low ratio of added sugar to added AGEs.

Free radical-scavenging composite gelatin methacryloyl hydrogels for cell encapsulation

Gelatin methacryloyl (GelMA) hydrogels have been widely used for cell encapsulation in tissue engineering due to their cell adhesiveness and biocompatibility. However, free radicals generated during gelation decrease the viability of the encapsulated cells by increasing intracellular oxidative stress, so appropriate strategies for scavenging free radicals need to be developed. To meet that need, we developed composite GelMA hydrogels incorporating nanofiber particles (EF) coated with epigallocatechin-gallate (EGCG). The GelMA composite hydrogels were successfully fabricated and had a storage modulus of about 5 kPa, which is similar to that of pristine GelMA hydrogel, and the drastic free radical scavenging activity of EGCG was highly preserved after gelation. In addition, human adipose-derived stem cells encapsulated within our composite hydrogels had better viability (about 1.5 times) and decreased intracellular oxidative stress (about 0.3 times) compared with cells within the pristine GelMA hydrogel. We obtained similar results with human dermal fibroblasts and human umbilical vein endothelial cells, indicating that our composite hydrogels are suitable for various cell types. Furthermore, we found that the ability of the encapsulated cells to spread and migrate increased by 5 times within the composite hydrogels. Collectively, our results demonstrate that incorporating EF into GelMA hydrogels is a promising way to enhance cell viability by reducing free-radical-derived cellular damage when fabricating 3D tissue ex vivo. Statement of significanceGelatin methacryloyl (GelMA) hydrogels have been widely applied to various tissue engineering applications because of their biocompatibility and cell interactivity. However, free radicals generated during the GelMA hydrogel fabrication decrease the viability of encapsulated cells by elevating intracellular oxidative stress. Here, we demonstrate radical scavenging GelMA hydrogels incorporating epigallocatechin-gallate (EGCG)-coated nanofiber particles (EF). The composite GelMA hydrogels are successfully fabricated, maintaining their mechanical properties, and the viability of encapsulated human adipose-derived stem cells is greatly improved after the gelation, indicating that our composite GelMA hydrogel alleviates damages from free radicals. Collectively, the incorporation of EF within GelMA hydrogels may be a promising way to enhance the viability of encapsulated cells, which could be applied to 3D tissue fabrication.

Polyaniline Functionalized Peptide Self-Assembled Conductive Hydrogel for 3D Cell Culture.

The functionalization of self-assembled peptide hydrogel is of great importance to broaden its applications in the field of biomedicine. In this work, conductive hydrogel is fabricated by introducing conductive polymer polyaniline into peptide self-assembled hydrogel. Compared with pure peptide formed hydrogel, the conductive hydrogel exhibits enhanced conductivity, mechanical property and stability. In addition, the hydrogel is tested to be of great injectability and 3D bio-printability and could support the viability of encapsulated cells that are sensitive to electrical signals. It should have great application prospects in the preparation of tissue engineering scaffolds.

Tuning Polymer Hydrophilicity to Regulate Gel Mechanics and Encapsulated Cell Morphology.

Mechanically tunable hydrogels are attractive platforms for 3D cell culture, as hydrogel stiffness plays an important role in cell behavior. Traditionally, hydrogel stiffness has been controlled through altering either the polymer concentration or the stoichiometry between crosslinker reactive groups. Here, an alternative strategy based upon tuning the hydrophilicity of an elastin-like protein (ELP) is presented. ELPs undergo a phase transition that leads to protein aggregation at increasing temperatures. It is hypothesized that increasing this transition temperature through bioconjugation with azide-containing molecules of increasing hydrophilicity will allow direct control of the resulting gel stiffness by making the crosslinking groups more accessible. These azide-modified ELPs are crosslinked into hydrogels with bicyclononyne-modified hyaluronic acid (HA-BCN) using bioorthogonal, click chemistry, resulting in hydrogels with tunable storage moduli (100-1000Pa). Human mesenchymal stromal cells (hMSCs), human umbilical vein endothelial cells (HUVECs), and human neural progenitor cells (hNPCs) are all observed to alter their cell morphology when encapsulated within hydrogels of varying stiffness. Taken together, the use of protein hydrophilicity as a lever to tune hydrogel mechanical properties is demonstrated. These hydrogels have tunable moduli over a stiffness range relevant to soft tissues, support the viability of encapsulated cells, and modify cell spreading as a consequence of gel stiffness.

Stability of Encapsulated Lactobacillus reuteri during Harsh Conditions, Storage Period, and Simulated In Vitro Conditions

Viability of probiotics in the foods and human bodies is important, because a certain minimum count of bacteria is necessary to impose health promoting effects. In the present work, we encapsulated Lactobacillus reuteri within whey protein isolate (WPI), soy protein isolate (SPI), WPI + inulin (WPI4I), and SPI + inulin (SPI4I) through spray drying method and investigated the efficiency of the microcapsules on the protection of the cells under different conditions (heat, salt, bile salt, penicillin, pH, simulated gastrointestinal condition, and storage). The particle size of the samples was in the range of 195.2–358.1 nm. The sensitivity of unencapsulated bacteria to heat was considerably higher than that to the encapsulated bacteria, so that, at 80°C, no growth (of unencapsulated type) was observed. At 60°C and 40°C, the cell count of free bacteria decreased to 5.81 and 8.04 log CFU/mL, respectively. The bacteria encapsulated within SPI4I showed the highest viability at these temperatures. A comparison between the effects of different pH values showed pH 1.5 more lethal than 2.5 and 7. The effect of NaCl at 4% concentration on decreasing the bacterial count was more notable than 2%. However, the used wall materials in all conditions resulted in higher viability of the cells compared to the free cells. Among different types of wall materials, it was observed that WPI4I imposed the best protective effect. The higher viability of cells within WPI4I wall material was also observed during the storage time. The viability of encapsulated cells decreased from 10.35 to 10.40 log CFU/g in the first week and to 8.93–9.23 log CFU/g in the last week of storage.

Construction of 3D printed constructs based on microfluidic microgel for bone regeneration

For the fabrication of engineered tissue constructs by three-dimensional (3D) bioprinting technology, the cell viability will be significantly affected by the shear stress during extrusion process and the exposure of light for cross-linking. Microgels with independently controlled compartments were demonstrated to provide protection for cells encapsulation. Here, we proposed to prepare the core-shell structured microgels for cells encapsulation to prevent the cell damage from the shear stress in extrusion-based 3D printing processes. The core-shell structured microgels with core layer of type I collagen and shell layer of alginate were prepared using a one-step innovational microfluidics technology through a multichannel microfluidic device. In the microfluidic parameters, acetic acid concentration and flow rate ratios of water phase to oil phase were found to evidently affect the morphology of microgels and viability of encapsulated cells. Methacrylated silk fibroin (SilMA) and methacrylated gelatin (GelMA) were synthesized and blended with cell-laden microgels as bioinks to fabricate the 3D-printed constructs. The increasing content of SilMA would decrease the pore size and increase the compression property of SilMA/GelMA hydrogels. Importantly, the microgels-containing SilMA/GelMA construct ensure the improved cell proliferation as compared to the SilMA/GelMA counterpart. Furthermore, the in vivo experiments demonstrated that Microgels-15%SilMA/GelMA construct exhibited good biocompatibility and better bone formation performance compared with 15%SilMA/GelMA construct. Therefore, the strategy of preparing cell-laden microgels based on microfluidic technology to improve the survival rate of cells in the bioprinting process can be available and effective in development of tissue engineered constructs.

Vapor-phased fabrication and modulation of cell-laden scaffolding materials

Bottom–up approaches using building blocks of modules to fabricate scaffolds for tissue engineering applications have enabled the fabrication of structurally complex and multifunctional materials allowing for physical and chemical flexibility to better mimic the native extracellular matrix. Here we report a vapor-phased fabrication process for constructing three-dimensional modulated scaffold materials via simple steps based on controlling mass transport of vapor sublimation and deposition. We demonstrate the fabrication of scaffolds comprised of multiple biomolecules and living cells with built-in boundaries separating the distinct compartments containing defined biological configurations and functions. We show that the fabricated scaffolds have mass production potential. We demonstrate overall >80% cell viability of encapsulated cells and that modulated scaffolds exhibit enhanced cell proliferation, osteogenesis, and neurogenesis, which can be assembled into various geometric configurations. We perform cell co-culture experiments to show independent osteogenesis and angiogenesis activities from separate compartments in one scaffold construct.

Increasing salinity of fibrinogen solvent generates stable fibrin hydrogels for cell delivery or tissue engineering.

Fibrin has been used clinically for wound coverings, surgical glues, and cell delivery because of its affordability, cytocompatibility, and ability to modulate angiogenesis and inflammation. However, its rapid degradation rate has limited its usefulness as a scaffold for 3D cell culture and tissue engineering. Previous studies have sought to slow the degradation rate of fibrin with the addition of proteolysis inhibitors or synthetic crosslinkers that require multiple functionalization or polymerization steps. These strategies are difficult to implement in vivo and introduce increased complexity, both of which hinder the use of fibrin in research and medicine. Previously, we demonstrated that additional crosslinking of fibrin gels using bifunctionalized poly(ethylene glycol)-n-hydroxysuccinimide (PEG-NHS) slows the degradation rate of fibrin. In this study, we aimed to further improve the longevity of these PEG-fibrin gels such that they could be used for tissue engineering in vitro or in situ without the need for proteolysis inhibitors. It is well documented that increasing the salinity of fibrin precursor solutions affects the resulting gel morphology. Here, we investigated whether this altered morphology influences the fibrin degradation rate. Increasing the final sodium chloride (NaCl) concentration from 145 mM (physiologic level) to 250 mM resulted in fine, transparent high-salt (HS) fibrin gels that degrade 2-3 times slower than coarse, opaque physiologic-salt (PS) fibrin gels both in vitro (when treated with proteases and when seeded with amniotic fluid stem cells) and in vivo (when injected subcutaneously into mice). Increased salt concentrations did not affect the viability of encapsulated cells, the ability of encapsulated endothelial cells to form rudimentary capillary networks, or the ability of the gels to maintain induced pluripotent stem cells. Finally, when implanted subcutaneously, PS gels degraded completely within one week while HS gels remained stable and maintained viability of seeded dermal fibroblasts. To our knowledge, this is the simplest method reported for the fabrication of fibrin gels with tunable degradation properties and will be useful for implementing fibrin gels in a wide range of research and clinical applications.

Microencapsulation of Lactobacillus casei and Lactobacillus rhamnosus in pectin and pectin-inulin microgel particles: Effect on bacterial survival under storage conditions

The main objective of the research was to evaluate the performance of synbiotic delivery systems using pectin microgels on the protection of two probiotic strains (Lactobacillus casei ATCC 393 and Lactobacillus rhamnosus strain GG [ATCC 53103]) to simulated gastrointestinal digestion (GD) and storage conditions (4 ± 1 °C) in a 42 days trial. Microgel particles were prepared by ionotropic gelation method and three variables were evaluated: incubation time (24 and 48 h), free vs encapsulated cells, and presence or absence of prebiotic (commercial and Jerusalem artichoke inulin). Results demonstrated an encapsulation efficiency of 96 ± 4% into particles with a mean diameter between 56 and 118 μm. The viability of encapsulated cells after 42 days storage stayed above 7 log units, being encapsulated cells in pectin-inulin microgels more resistant to GD compared to non-encapsulated cells or without prebiotics. In all cases incubation time influenced the strains' survival.