Design Of Vest Research Articles

Dynamic simulation and finite element analysis of the human mandible injury protected by polyvinyl alcohol sponge

There have been intensive efforts to find a suitable kinetic energy absorbing material for helmet and bulletproof vest design. Polyvinyl alcohol (PVA) sponge is currently in extensive use as scaffolding material for tissue engineering applications. PVA can also be employed instead of commonly use kinetic energy absorbing materials to increase the kinetic energy absorption capacity of current helmet and bulletproof vest materials owing to its excellent mechanical properties. In this study, a combined hexahedral finite element (FE) model is established to determine the potential protection ability of PVA sponge in controlling the level of injury for gunshot wounds to the human mandible. Digital computed tomography data for the human mandible are used to establish a three-dimensional FE model of the human mandible. The mechanism by which a gunshot injures the protected mandible by PVA sponge is dynamically simulated using the LS-DYNA code under two different shot angles. The stress distributions in different parts of the mandible and sponge after injury are also simulated. The modeling results regardless of shot angle reveal that the substantial amount of kinetic energy of the steel ball (67%) is absorbed by the PVA sponge and, consequently, injury severity of the mandible is significantly decreased. The highest energy loss (170J) is observed for the impact at entry angle of 70°. The results suggest the application of the PVA sponge as an alternative reinforcement material in helmet and bulletproof vest design to absorb most of the impact energy and reduce the transmitted load.

Impact of ballistic body armour and load carriage on walking patterns and perceived comfort

This study investigated the impact of weight magnitude and distribution of body armour and carrying loads on military personnel's walking patterns and comfort perceptions. Spatio-temporal parameters of walking, plantar pressure and contact area were measured while seven healthy male right-handed military students wore seven different garments of varying weight (0.06, 9, 18 and 27 kg) and load distribution (balanced and unbalanced, on the front and back torso). Higher weight increased the foot contact time with the floor. In particular, weight placement on the non-dominant side of the front torso resulted in the greatest stance phase and double support. Increased plantar pressure and contact area observed during heavier loads entail increased impact forces, which can cause overuse injuries and foot blisters. Participants reported increasingly disagreeable pressure and strain in the shoulder, neck and lower back during heavier weight conditions and unnatural walking while wearing unbalanced weight distributed loads. This study shows the potentially synergistic impact of wearing body armour vest with differential loads on body movement and comfort perception. Practitioner Summary: This study found that soldiers should balance loads, avoiding load placement on the non-dominant side front torso, thus minimising mobility restriction and potential injury risk. Implications for armour vest design modifications can also be found in the results.

현대 여성패션에 나타난 베스트(Vest)디자인의 특성

This paper reports on a study of the morphological design trends and characteristics of vests in contemporary fashion for women. A review of the relevant literature was conducted, and visual images found in various collections displayed in local and foreign papers and on internet web sites over the period 2001 to 2009 were analysed. The analysis of the vest designs showed that 78% had no collar, 41.8% were waist-length, 70.5% used general fabrics of various colors and patterns, 98.2% had a single fastening system, 69.8% used buttons for fastening, and 67.4% were intended to be worn as outwear over inner wear items such as a shirt or blouse. The trends in vest design were characterized by the expression of an androgynous image, by creative diversity and by an escape from traditional forms.

18세기 서양남성복 베스트를 응용한 의상 작품 제작

The men's costume of eighteenth century showed feminine image of elegant decoration through the influence of social feminine atmosphere. As years go, heading towards the end of the eighteenth century, most of men's wear were simplified except vest, which had gorgeous decorations showing feminity. Therefore, men's vest of eighteenth was regarded as good item to apply to modern women's wear. The men's vest design of eighteenth century were divided into three types due to the passage of time, they showed the difference in the length, detail and trimming. Cutting lines in the modern fashion are used to give comfort and show the three-dimensional body silhouette. Also, cutting lines, as a decoration element, can define the costume's image and characteristics. Therefore, by using cutting lines, we can represent historical costume as modern costume and men's wear as women's wear. I made five women's costumes applying design characteristics of the men's vest of the eighteenth century. These five women's costumes have decorative aspect of men's vest of eighteenth century and simple aspect of men's costume. I applied dart manipulation in several different ways to make various cutting lines for women's costume. These cutting lines were emphasized by matching various colors and patterns of fabrics. I made small buttons and cords of these various fabrics. I sewed fabric buttons on five costumes for the purpose of function and decoration like buttons of the men's vest of eighteenth century. I applied fabric cords to decorate five costumes in various way. We should further study how to express important characteristics of historical costumes as modern costume in many ways.

Design and development of interactive textiles for impact detection and use with an automated boxing scoring system

This project was aimed at delivering a cost-effective, manufacturable and well characterised vest for impact detection, to support hdevelopment of an automated scoring system for amateur boxing. The initial work focused on partial automation of the manufacture of an existing boxing vest design to increase the vest’s robustness and allow small scale manufacture. The multiplication of the existing sensor vest enabled routine use in field trials that assisted the development of the related hardware and software but involved a wide combination of time consuming manufacture skills with a high labour component. Parallel work explored the use of alternative vest impact sensing methods incorporating textile sensors with a view to increasing garment functionality and achieving a more ‘singlet-like’ structure. This resulted in the development of a new ‘all-textile’ sensor vest that has significant advantages in terms of practicality, impact discrimination, and manufacture.

The Cooling Vest for Comfortable Work Environment in the Telecomunication Machine Room Design of Cooling Vest and Subjective Experiments

The Cooling Vest for Comfortable Work Environment in the Telecomunication Machine Room Design of Cooling Vest and Subjective Experiments

Accuracy of tidal volume, lung volume, and flow measurements by inductance vest in COPD patients.

We analyzed the accuracy of the inductance vest in measuring several ventilatory parameters in five patients with chronic obstructive pulmonary disease (COPD). We assessed tidal volume (VT) accuracy at different respiratory frequencies in different lying body positions with different thoracic and abdominal contributions to breathing and the accuracy over a 4-h time span. Mean percent error was calculated without regard to direction of error. The mean error of vest VT estimation was 7.6% for all body positions studied and 5.6% for right and left lateral positions combined. Vest VT accuracy was unchanged after 4 h and with changes in thoracic and abdominal contributions to VT. The mean errors for inspiratory and expiratory times were 3.3 and 2.0%, respectively. Volume was differentiated to flow. For respiratory rates ranging from 12 to 30 breaths/min, the mean error of the vest and our differentiation circuit in duplicating peak flows measured at the mouth was 3.5%. The ability of the vest to estimate changes in end-expiratory position or functional residual capacity was not as good as with VT; the mean error was 30.7%. For estimation of VT, ventilatory timing, and airflow in COPD patients, the inductance vest performs well. For measurement of changes in lung volume, improvements in vest design need to be made.