Wave Propagation Velocity Research Articles

Anisotropy of acoustic properties in thin-sheet rolled low-carbon manganese steel

Thin-sheet rolled low-carbon manganese steel 09G2S with a thickness of 0,8 mm which has strong property anisotropy due to texture and residual stresses, was experimentally studied using SH-wave with horizontal polarization and zero-order symmetric Lamb wave mode. The velocities of elastic wave propagation along the sheet were analyzed as their direction and polarization varied relative to the rolling direction in the range of angles from 0 to 180 degrees. The excitation and reception of normal waves in the sheet were carried out by piezoelectric transducers with dry point contact, providing tangential force application. The results of the research on the anisotropy of acoustic properties, X-ray structural analysis of residual stresses and inverse pole figures, and metallographic studies were obtained.

A Multiscale Mathematical Model for the Fetal Blood Circulation of the Second Half of Pregnancy.

Doppler ultrasound is a commonly used method to assess hemodynamics of the fetal cardiovascular system and to monitor the well-being of the fetus. Indices based on the velocity profile are often used for diagnosis. However, precisely linking these indices to specific underlying physiology factors is challenging. Several influences, including wave reflections, fetal growth, vessel stiffness, and resistance distal to the vessel, contribute to these indices. Understanding these data is essential for making informed clinical decisions. Mathematical models can be used to investigate the relation between velocity profiles and physiological properties. This study presents a mathematical model designed to simulate velocity wave propagation throughout the fetal cardiovascular system, facilitating the assessment of factors influencing velocity-based indices. The model combines a one-fiber model of the heart with a 1D wave propagation model describing the larger vessels of the circulatory system and a lumped parameter model for the microcirculation. Fetal growth from 20 to 40 weeks of gestational age is incorporated by adjusting cardiac and circulatory parameter settings according to scaling laws. The model's results, including cardiac function, cardiac output distribution, and volume distribution, show a good agreement with literature studies for a growing healthy fetus from 20 to 40 weeks. In addition, Doppler indices are simulated in various vessels and agree with literature as well. In conclusion, this study introduces a novel closed-loop 0D-1D mathematical model that has been verified against literature studies. This model offers a valuable platform for analyzing factors influencing velocity-based indices in the fetal cardiovascular system.

Model of time-distance curve of electromagnetic waves diffracted on a local feature in the georadar study of permafrost zone rock layers

In GPR (georadar) studies, one of the most popular procedures for determining electromagnetic waves propagation velocity in a rock mass is the selection of theoretical hyperbolic time-distance curves and subsequent comparison with the time-distance curve obtained from a GPR measurement. This procedure is based on the model of homogeneous medium, but nowadays the subject of GPR study is often inhomogeneous media, such as horizontally layered media characteristic of loose permafrost zone sediments. The paper presents the findings of studying the formation of hyperbolic time-distance curves of georadar impulses in a horizontally layered medium without taking into account the dispersion and absorption of electromagnetic waves. On the basis of geometrical optics laws, formulas were derived to calculate the shape of the hyperbolic lineup of georadar impulses reflected from a local feature in a multilayer frozen rock mass. On the example of a permafrost zone rock mass containing a layer of unfrozen rocks, the effect of the thicknesses of rock layers and their relative dielectric permittivity on the apparent dielectric permittivity resulting from the calculation of the theoretical hyperbolic time-distance curve was shown. The conditions under which it is impossible to determine the presence of a layer of unfrozen rocks from a hyperbolic time-distance curve are also presented. The established regularities were tested on synthetic georadar radargrams calculated in the gprMax software program. The findings of the theoretical studies were confirmed by the comparison with the results of the analysis of the georadar measurements computer simulation data in the gprMax system (the relative error was less than 0.5%).

Electromagnetic Model of K‐Changes

AbstractK‐changes are observed as step‐like increases in the thundercloud electric fields. The K‐changes occur in the late part of intra‐cloud lightning or during negative cloud‐to‐ground lightning between return strokes. It has been shown that the processes leading to K‐changes initiate in the decayed part of a positive leader channel and propagate toward the flash origin. They are often accompanied by microsecond‐scale electric field pulses. We introduce a new model to simulate processes leading to the K‐changes in cloud‐to‐ground lightning. Our method is based on the full solution of Maxwell's equations coupled to Poisson's equation for the thundercloud charge structure. To model the K‐changes, we gradually increase the decayed channel conductivity. The modeled current wavefront propagates due to the K‐processes downward along a vertical channel and completely attenuates before reaching the ground. We derive the evolution of the linear charge densities and the scalar electric potential along the channel leading to K‐changes. We model electrostatic step‐like changes in the measured electric field together with the approximate rates and amplitudes of the microsecond scale pulses. Step‐like changes increase their amplitudes with the length of the simulated channel and with a higher conductivity of the channel. The microsecond‐scale pulse waveshapes depend mainly on the propagation velocity of the current wave, and the time scale of the conductivity increase. We show that our modeled waveforms are in a good agreement with observations conducted in Florida.

Linear pressure waves in mono- and poly-disperse bubbly liquids: Attenuation and propagation speed in slow and fast and evanescent modes

Using volumetric averaged equations from a two-fluid model, this study theoretically investigates linear pressure wave propagation in a quiescent liquid with many spherical gas bubbles. The speed and attenuation of sound are evaluated using the derived linear dispersion. Mono- and poly-disperse bubbly liquids are treated. To precisely describe the attenuation effect, some forms of bubble dynamics equations and temperature gradient models are employed. Focusing on the dissipative effect, we analyze the stop band that occurs in the linear dispersion relation. In the two-fluid model, even if the dissipation effect is considered, the inconvenience that the wavenumber diverges to infinity in the resonance frequency cannot be resolved. Additionally, the validity of terminating that wavenumber value in the middle of the frequency is demonstrated. To determine a linear dispersion relation that can exactly predict thermal conduction and acoustic radiation, wave propagation velocities and attenuation coefficients are compared with some experimental data and existing models. The results show that thermal conduction and acoustic radiation should be set appropriately to accurately predict the propagation velocity and attenuation except in the high frequency range, the phase velocity in the resonance frequency range, or the attenuation in the high frequency range.

Volcanic tremor associated with successive gas emission activity at a boiling pool: Analyses of seismic array and visible image data recorded at Iwo-Yama in Kirishima Volcanic complex, Japan

Volcanic tremors are often observed during volcanic activity and volcanic eruptions, and their generation processes provide clues for understanding volcanic fluid activity underground and eruption dynamics. However, tremors are characterized by continuous oscillations that mask P- and S-waves; hence few studies have precisely located the source, which is the most fundamental information for understanding the generation mechanism. In this study, we focus on volcanic tremors excited by continuous gas emissions occurring at a vent called Y2a in Iwo-Yama, the Kirishima Volcanic Complex, Japan, to clarify the source process of the tremor as well as gas emission activity. We simultaneously observed the volcanic tremor by deploying a small aperture array consisting of six seismometers and the gas emission activity by using a newly developed visual IoT system that can be operated without commercial electricity. MUSIC analysis locates the tremor at depths ranging from the ground surface to approximately 200 m beneath the Y2a and Y2b vents, which are approximately 30 m apart, for approximately four months from November 2021 to February 2022. The source locations of the tremors in the 2 Hz (1.2–2.6 Hz), 4 Hz (3–4 Hz), and 5 Hz (4–5.5 Hz) ranges show some differences and changes with time. The source location tends to become deeper when the 2 Hz amplitude is large. The infrasound generated by gas emission activity is dominant in the tremor signals, which are recognized in the wave propagation velocity with an acoustic velocity of 330 m/s when the 2 Hz amplitude is small. The visual IoT system succeeded in detecting long-term changes in the gas emission activity, and we found that the 2 Hz amplitude of tremor was well correlated with the amount of hot water in the boiling pool of Y2a, which was controlled by precipitation and evaporation during non-rainy days. From these observations, we infer that the volcanic tremor is generated by resonance of volcanic gas and hot water in a crack-like structure beneath Y2a. The resonance was triggered by the counterforces of the gas emissions in the boiling pool, and the infrasound was dominant during periods of hot water depletion in the boiling pool. Temporal changes in the source depths may be caused by changes in the fluid properties, configuration of the resonator and/or the strengths of the underground sources and infrasound. Our simultaneous observations of seismic array and visual IoT system clarify that even the continuous gas emission activity that looks stable is controlled by external sources such as precipitation.

Experimental investigation on propagation characteristics of rotating detonation wave fueled by diesel

Diesel fuel plays an indispensable role in the energy power sector. Detonation is a self-pressurizing combustion mode that can improve the utilization efficiency of diesel fuel. Through experiments, this paper explored the propagation characteristics of diesel/air RDWs within three different air-inlet slot width structures. A total of 24 high-pressure atomizing nozzles were evenly distributed circumferentially to inject diesel fuel into the combustor. The air, preheated by a heater, was injected into the combustor through the air-inlet slot. The results demonstrate the successful achievement of diesel/air rotating detonation under three different air-inlet slot width structures. As the width increases, the range of operating conditions for achieving detonation becomes more limited. As the air temperature rises, so does the detonation wave's propagation velocity, reaching up to 79 % of the theoretical CJ value. Both single-wave and two-wave collision modes were obtained in the experiments, with a constantly shifting collision point of the two-wave mode, forming the drift phenomenon. The establishment time for the detonation wave is comparatively short, ranging from 2.0 to 5.5 ms, and is minimally affected by the air-inject slot width and the total air temperature. The two-wave collision mode evolved from the single-wave form.

Identification of mineralogical ore varieties using ultrasonic measurement results

Purpose. To improve the measurement and information base of ultrasonic measurements rock characteristics to assess their mineralogical varieties. It is proposed to use a combination of measurement results of the acoustic quality factor of the test sample in relation to longitudinal and transverse ultrasonic waves, as well as the characteristic coefficient based on the dispersion and the average amplitude value of the received signal, for fuzzy identification of mineralogical and technological varieties of iron ore. Methods. As elastic waves propagate through the rock mass, they undergo attenuation due to absorption and dissipation of ultrasonic signal energy. The degree of attenuation, as well as the wave propagation velocity, is dependent on the physical-mechanical and chemical-mineralogical properties of the medium through which they travel. In this paper, we analyze a rock characterized by a complex structure comprising ore inclusions and surrounding matrix, each of which differs in its physical-mechanical and chemical-mineralogical properties. In particular, in iron ore samples, the distribution of mineral grains and aggregates exhibits significant heterogeneity in terms of both amount and size. Findings. An iterative method of fuzzy identification of mineralogical-technological iron ore varieties, based on the analysis of their properties in vector space of features, allows, by minimizing the sums of weighted distances between the analyzed and reference values of ultrasonic measurement results, to attribute them with a certain degree of belonging to the main technological types of ores mined at the deposit, and define them as magnetite quartzite with a confidence probability of 0.93. Originality. As an information base for identification of mineralogical iron ore varieties, the results of measuring the velocity and attenuation of longitudinal and transverse ultrasonic waves of appropriate frequency are used, on the basis of which the acoustic quality factor of the rock sample is calculated, as well as the characteristic parameter S, which is determined by the dispersion and average values of the received ultrasonic signal intensity, which has traveled a certain distance in the studied environment. Practical implications. The results of tests and practical approbation of the method for identifying mineralogical iron ore varieties based on the data of ultrasonic well logging testify to its high efficiency, which allows recommending the developed scientific-technical solutions for wide industrial application at mining enterprises.

Algorithm for constructing unmeasured logging curves (pseudo-logging) in wells of developed fields

In many cases, the diagrams of some logs in an old well of producing fields are not recorded for some reason or another. Currently, the importance of reassessing the efficiency of such fields is obvious, while the absence of some log curves causes great difficulties. In particular very few studies with acoustic logging (AL) have been carried out in old wells. On the other hand, in 1960-80, among the studies carried out in wells, preference was given to various types of electrical logging (EL), neutron-gamma logging (NGL), and gamma ray logging (GRL). To overcome such difficulties, it is necessary to create diagrams of unmeasured well logs or pseudo-logs. Nowadays, there are methods for constructing pseudolog curves. For example, the method of statistical analysis is widely used. However, in most cases, their implementation is very complex and requires a lot of work. We have developed a new method to construct pseudo-log curves. At first, the propagation velocity of elastic waves in rocks is studied based on seismic survey (SS) and AL data, which are performed presently on the investigation field. Based on this information, objects of interest to the oil industry are selected, their geometric dimensions are determined, the contour of oil and gas saturation is assessed, areas with abnormally high reservoir pressure are studied, the process of accumulation deposition is re-examined, and the preparation of an optimal well network diagram for the effective exploitation of the field is determined. Further, based on the long-ago measured curves of electrical loggings and neutron-gamma logging, we obtain the pseudo-log AL curve in old boreholes and the data SS. The proposed method was tested in 48 wells in the Bahar field (Azerbaijan). The method has shown high efficiency, its reliability is confirmed by independent data. The results of the method help in solving several geological problems: monitoring changes in petrophysical quantities of rocks between wells during development; study of well formations located below the design depth; recalculation of hydrocarbon reserves; determination of the location for drilling new wells, etc

Study on the propagation characteristics of shockwave in dense crowd in corner passage

Crowd shockwaves are prone to occur when evacuating dense crowds, especially in areas with corner passages, leading to congestion and accidents. The characteristics of shockwaves in corner passages need further exploration. This study used AnyLogic software based on the social force model to construct scenarios. The propagation mechanism of crowd shockwaves was revealed through simulation analysis of the changes in wave amplitude, duration, and propagation velocity of crowd density waves under different corner angles (0–90°). It was found that a 45° corner passage has advantages compared to other corner passages for evacuation. At higher desired velocities, pedestrians form a bottleneck-like area at the corner of the passage, resulting in crowd shockwaves. Because of social forces, congestion occurs primarily in the corner area. To alleviate this pressure, pedestrians actively adjust the distance between themselves and others. The time interval between the two shockwaves decreases as the desired velocity increases. The propagation time of crowd shockwaves before the corner is generally more significant than the duration after the corner. This study could guide the elimination or reduction of crowd shockwaves, improving pedestrians' evacuation efficiency and safety in evacuation passages.

Experimental investigation of collapsible soils under oedometric loading: effect of internal erosion

Collapsible soils, geological formations characterized by pronounced structural instability upon saturation, present a significant challenge in geotechnical engineering. This experimental study aims to deepen our understanding of the mechanisms governing the behavior of these soils, which are particularly prevalent in arid and semi-arid regions subject to extreme hydrological cycles. Collapsible soils, sensitive to climatic variability, undergo profound alterations in their hydromechanical properties due to alternating periods of prolonged drought and intense rainfall events. These fluctuations induce significant modifications in the soil's pore structure, promoting the development of internal erosion phenomena such as suffusion. The results obtained from this experimental investigation on reconstituted samples highlight the combined influence of various factors, such as water content, dry density, particle size, and flow rate, on the collapse potential. It appears that fine particles play a predominant role in the formation of fragile structures, susceptible to collapse upon saturation. Moreover, the intensity and duration of infiltration significantly influence the propagation velocity of ultrasonic waves, thus offering a promising tool for monitoring the evolution of damage within the soil mass. Furthermore, this study provides essential insights for assessing the risks associated with collapsible soils and contributes to the development of more reliable characterization and modeling methods. It emphasizes the need to consider the complex interactions between the physical, chemical, and mechanical properties of the soil, as well as the influence of environmental conditions, for better control of the risks associated with these materials.

Evaluation of carotid artery elasticity and its influencing factors in non-obese PCOS patients using a technique for quantitative vascular elasticity measurement.

To evaluate the intima-media thickness (IMT) and elasticity of the carotid artery in non-obese polycystic ovary syndrome (PCOS) patients using a quantitative technique for vascular elasticity measurement and to explore the influencing factors. Sixty non-obese patients without metabolic and cardiovascular diseases who were diagnosed with PCOS in the Women and Children's Hospital of Chongqing Medical University from January to December 2022 were prospectively selected (case group), and 60 healthy volunteers matched for body mass index were included as the control group. Body weight, height, heart rate, blood pressure, and waist-to-hip ratio were recorded. Fasting blood samples were drawn from the elbow vein to measure hormone levels including total testosterone (TT), sex hormone-binding globulin (SHBG), fasting plasma glucose (FPG), fasting insulin (FINS), lipids, and homocysteine (Hcy). The insulin resistance index (HOMA-IR) and free androgen index (FAI) were calculated. Ultrasound elastography was used to measure the IMT and elastic function parameters of the right carotid artery, including vessel diameter, wall displacement, stiffness coefficient, and pulse wave velocity. Differences in various parameters between the two groups were analyzed, and correlations between the carotid stiffness coefficient and other serological indicators were assessed using Spearman correlation analysis. No significant differences in age, body mass index, heart rate, systolic blood pressure, and diastolic blood pressure were observed between the two groups (all P>0.05), while the waist-to-hip ratio (WHR) was higher in the case group than in the control group (P<0.05).The hormone level serological indicators TT and FAI were higher in the case group than in the control group, and SHBG was lower in the case group than in the control group (all P<0.05). The metabolism-related serum indicators LDL-C, HDL-C, FPG, triglycerides, and total cholesterol levels were not statistically different between the two groups (all P>0.05), and serum FINS, HOMA-IR, and Hcy levels were significantly higher in the case group than in the control group (all P<0.05).No significant difference in carotid artery diameter was observed between the case group and control group (P>0.05). The carotid artery displacement in the case group was significantly smaller than that in the control group (P<0.05), and carotid IMT, hardness coefficient, and pulse wave propagation velocity were greater in the case group than in the control group (all P<0.05). The carotid elastic stiffness coefficient was positively correlated with WHR, TT, SHBG, FAI, FINS, HOMA-IR and Hcy to varying extents and negatively correlated with SHBG. In non-obese PCOS patients with no metabolic or cardiovascular disease, the carotid stiffness coefficient was increased and correlated with indicators of hyperandrogenism, insulin resistance, and hyperhomocysteinemia.

Estimating the viscoelastic anisotropy of human skin through high-frequency ultrasound elastography.

The skin is the largest organ of the human body and serves distinct functions in protecting the body. The viscoelastic properties of the skin play a key role in supporting the skin-healing process, also it may be changed due to some skin diseases. In this study, high-frequency ultrasound (HFUS) elastography based on a Lamb wave model was used to noninvasively assess the viscoelastic anisotropy of human skin. Elastic waves were generated through an external vibrator, and the wave propagation velocity was measured through 40MHz ultrafast HFUS imaging. Through the use of a thin-layer gelatin phantom, HFUS elastography was verified to produce highly accurate estimates of elasticity and viscosity. In a human study involving five volunteers, viscoelastic anisotropy was assessed by rotating an ultrasound transducer 360°. An oval-shaped pattern in the elasticity of human forearm skin was identified, indicating the high elastic anisotropy of skin; the average elastic moduli were 24.90±6.63 and 13.64±2.67kPa along and across the collagen fiber orientation, respectively. The average viscosity of all the recruited volunteers was 3.23±0.93Pa·s. Although the examined skin exhibited elastic anisotropy, no evident viscosity anisotropy was observed.

Pacing cycle length–dependent electrophysiologic changes in left atrium: Poor validity of using low-voltage area and slow conduction area under specific pacing cycle length as absolute substrates of atrial fibrillation

BackgroundPacing cycle length (PCL)–dependent changes in left atrial (LA) electrophysiologic properties have not been fully elucidated. ObjectiveWe aimed to elucidate these changes using a high-resolution mapping system. MethodsForty-eight patients underwent atrial fibrillation ablation with RHYTHMIA HDx. Paired LA maps under a baseline PCL (600 ms) and rapid PCL (300 ms) were acquired after pulmonary vein isolation under right atrial appendage pacing. The PCL-dependent change in the low-voltage area (LVA; area with <0.5 mV bipolar voltage), LA activation time (interval from first LA activation to wavefront collision at lateral wall), regional mean voltage, regional mean wave propagation velocity, and slow conduction area (area with <0.3 m/s wave propagation velocity) were quantitatively analyzed. ResultsUnder the rapid PCL, the total LVA was significantly increased (7.6 ± 9.5 cm2 vs 6.7 ± 7.6 cm2; P = .031), especially in patients with a 10 cm2 LVA on the baseline PCL map (21.5 ± 9.1 cm2 vs 18.1 ± 6.5 cm2; P = .013). The LA activation time was also prolonged (87.9 ± 16.2 ms vs 84.0 ± 14.0 ms; P < .0001). Although the rapid PCL did not decrease the regional mean voltage, it significantly decreased the regional mean wave propagation velocity and increased the slow conduction area in all measured regions. ConclusionLVA and slow conduction area can be emphasized by rapid PCL LA mapping. There may be poor validity in using these areas as absolute atrial fibrillation substrates without considering the PCL-dependent changes.

Temperature impact on acoustic wave reflection in quasi-collinear acousto-optic devices.

Quasi-collinear geometry is a special configuration of acousto-optic (AO) diffraction that applies the acoustic wave reflection from the AO cell input optical face and provides an extremely large interaction length for achieving abnormally high spectral resolution of AO tunable filters. As a result, it becomes possible to implement the multifrequency diffraction which has found important applications for laser pulse shaping. The operation of quasi-collinear AO devices in the multifrequency diffraction regimen is accompanied by the appearance of the longitudinal and transverse temperature gradients in the crystal, mainly due to the acoustic power absorption. Temperature changes the AO cell material stiffness moduli, affecting the characteristics of the incident and reflected acoustic waves (propagation velocities and walk-off angles), and the reflection condition in general. On the example of paratellurite crystal is shown that the AO cell heating near the reflecting facet leads to a deviation of the reflected acoustic beam propagation direction from that specified during the AO cell manufacturing. The deviation magnitude depends on the reflection geometry choice and, in the paratellurite, may exceed several degrees, which adversely affects the AO diffraction characteristics, reducing the AO interaction efficiency and distorting the transmission function shape. The reflected beam deviation may be compensated by means of choosing the angle between the AO cell reflecting face and the piezoelectric transducer face, taking into account the operating AO device thermal regimen.

Ultrasonic measurement method for three-dimensional assembly stress of aero-engine rotors

The precise measurement of three-dimensional stress in the rotor is a key means to ensure the assembly accuracy and operational safety of aero-engines. The unclear coupling influence mechanism of different directions of stress on ultrasonic propagation makes it challenging to establish a three-dimensional stress measurement model. This paper proposes a three-dimensional assembly stress measurement method for aero-engine rotors based on ultrasonic propagation time difference decoupling. The three-dimensional assembly stress is converted into the stress component parallel and perpendicular to the ultrasonic wave propagation direction in this method. The acoustoelastic equation including three-dimensional stress parameters is established based on the function model of different direction stress and ultrasonic wave propagation velocity. An innovative three-transducer stress measurement scheme is designed, which integrates ultrasonic wave transmitting and receiving transducers and time difference feedback transducers. The acoustoelastic equations in three propagation directions are constructed by rotating the transducer group to change the propagation direction of ultrasonic waves. Finally, the acoustoelastic equations are solved simultaneously to decouple the ultrasonic propagation time difference, thus achieving a three-dimensional assembly stress measurement of the aero-engine rotor. The experimental results show that the maximum deviation between the measured values and the simulation results in the x ,y, and z directions is 15.885 MPa, 14.113 MPa, and 17.093 MPa, respectively. This study provides effective theoretical and technical support for precisely measuring three-dimensional assembly stress in high-end equipment represented by aero-engines.

Simulation and Analysis of Pressure Waves in Flow Channels of Axial and Radial Gas Wave Ejectors

Introduction: As an efficient energy transfer technology, the gas wave ejector (GWE) holds several patents poised to address the challenges of low-carbon energy. These patents find applications in numerous fields. Traditional axial-flow GWE patents encounter limitations under certain application conditions, whereas radial-flow GWE patents offer an effective solution to these issues. However, the mechanisms behind the performance differences between these two types of GWEs have not yet been studied. Objective: Since pressure waves are central to energy transfer in wave rotors, this study analyzes the coupling effects of centrifugal forces and pressure waves. By examining the differences in pressure wave intensity and propagation velocity within two types of wave rotor channels, the mechanisms underlying the performance disparities are elucidated. Method: Fluent was utilized for numerical simulations, and Response Surface Methodology was employed to model the influence of various factors. Result and Discussion: It can be observed that the propagation velocity and intensity of pressure waves changed under the influence of centrifugal forces. The propagation velocities of S1 and E2, which propagate in the same direction as the fluid flow within the rotor, increase 9% and 32% respectively, whereas the propagation speed of E1, which propagates in the opposite direction of the fluid flow, decreases 15%. Regarding the intensity of each pressure wave, the coupling effect of centrifugal force resulted in an increase of 1.04 to 2.55 kPa. This paper is the first to fit a relational expression for the speed differential of pressure wave propagation within axial and radial flow channels, correlating the main pressure wave velocities (S1, E1, E2) with flow channel length, rotational speed, compression ratio, and expansion ratio, thus providing a reference for GWE design and analysis. Through analysis of variance and significance tests, it is evident that each parameter significantly contributes to the fitting degree of the pressure wave propagation velocity difference (p &lt; 0.01). Furthermore, the inadequacy test (F-value=2.36~3.56) suggests a low level of discrepancy. Conclusion: The fundamental reason for the performance disparity between the two types of gas wave ejectors (GWE) lies in the discrepancies in pressure wave intensity and propagation velocity resulting from centrifugal force effects. Based on the fitted relationships, theoretical foundations can be provided for subsequent wave rotor design and performance analysis. For example, the differences in pressure wave propagation speed can inform the design and analysis of corresponding pressure ports.

Qualitative difference between large waves in deep and shallow fluid formulations

The note addresses a qualitative difference between shallow (vertically confined) and deep (vertically non-confined) fluid geometries for stationary internal solitary waves. It is shown that in a deep fluid, the propagation velocity of large amplitude wave (with a vortex inside) is greater than the velocity predicted by small but finite amplitude theory, known as the Benjamin-Ono model. This effect has been found both asymptotically and experimentally. For the case of a shallow fluid, the situation is qualitatively different. The speed of a wave with vortex inside is smaller than that predicted by the Korteweg-de Vries theory. The reported observation could distinguish wave motions in shallow (confined) and deep (non-confined) geometries and seems to be important in a variety of applications.

Process simulation of laser shock-based disassembly of adhesively bonded composite/metallic structural parts: a numerical upscaling

ABSTRACT In previous works, both experimental and numerical investigations have shown the potential of the laser shock technique for disassembling adhesively bonded composite/metal coupons. This study extends this concept to upscale the method, focusing on the full disassembly of a foreign object damage (FOD) panel designed to replicate an aircraft engine fan blade. Utilizing LS-Dyna explicit FE software, the numerical simulation incorporates various material models: a progressive damage model for the 3D CFRP substrate, Johnson–Cook plasticity model combined with Grüneisen equation of state for the titanium layer, and a cohesive zone model with a bilinear traction separation law for the adhesive layer. Investigating the FOD panel’s inclined geometry, a preliminary analysis examines the impact of inclination angles on shock wave propagation and back face velocity, revealing minimal alterations. Initial simulations are conducted to determine double pulse delay times and evaluate spot location effects. Automation of the multi-step process simulation is achieved through a Python script. After approximately 30 shots, complete disassembly of the FOD strip is achieved, with observed damage primarily limited to matrix cracking in the composite substrate. Numerical findings support the efficacy of the double-shot laser shock method for disassembling adhesively bonded metallic/CFRP components, contingent upon appropriate experimental arrangements.

Experimental and numerical simulation of the attenuation effect of blast shock waves in tunnels at different altitudes

Traffic engineering such as tunnels in various altitudinal gradient zone are at risk of accidental explosion, which can damage personnel and equipment. Accurate prediction of the distribution pattern of explosive loads and shock wave propagation process in semi-enclosed structures at various altitude environment is key research focus in the fields of explosion shock and fluid dynamics. The effect of altitude on the propagation of shock waves in tunnels was investigated by conducting explosion test and numerical simulation. Based on the experimental and numerical simulation results, a prediction model for the attenuation of the peak overpressure of tunnel shock waves at different altitudes was established. The results showed that the peak overpressure decreased at the same measurement points in the tunnel entrance under the high altitude condition. In contrast, an increase in altitude accelerated the propagation speed of the shock wave in the tunnel. The average error between the peak shock wave overpressure obtained using the overpressure prediction formula and the measured test data was less than 15%, the average error between the propagation velocity of shock waves predicted values and the test data is less than 10%. The method can effectively predict the overpressure attenuation of blast wave in tunnel at various altitudes.