Vehicle System Research Articles

Smart Zone-Based Vehicle Speed Retarding System Utilizing Radio Frequency (RF) in Electronic Vehicles

The proposed system aims in designing an efficient automatic wireless vehicle speed control in low-speed zones using RF communication. The advent of new high-speed technology and the growing computer capacity provided realistic opportunity for new robot controls and realization of new methods of control theory. This technical improvement together with the need for high performance robots created faster, more accurate and more intelligent robots using new robots control devices, new drivers and advanced control algorithms. The proposed method uses RF transmitter and receiver modules for establishing wireless communication, DC motors for the vehicle movement controller. The status of the project will display on LCD display. The controlling device of the whole system is a Microcontroller to which RF receiver module, DC motors are interfaced through a motor driver. Whenever the vehicle enters into a low-speed zone, the data from RF transmitter of low-speed zone will be received by the vehicle system. The microcontroller in the vehicle system automatically slows down the speed to the speed limit of that zone. The microcontroller checks the data with the program embedded in it and performs appropriate actions on the electric motors. The microcontroller is programmed using Embedded C language.

Solar Wireless Electric Vehicle Charging System

This project outlines the design and implementation of a solar-powered electric vehicle charging station that addresses the dual challenges of high gasoline prices and harmful emissions. The number of countries adopting electric vehicles continues to rise, as they not only promote environmental sustainability but also significantly lower transportation costs by substituting expensive fuels with more affordable electricity. In this context, developing an electric vehicle charging infrastructure offers an innovative and effective solution. This system enables electric vehicles to charge while in motion, eliminating the need for stationary charging stops. Powered entirely by solar energy, it requires no additional power supply. The system incorporates solar panels, batteries, transformers, regulator circuits, copper coils, AC/DC converters, Atmega328P controllers, and LCD displays. This technology demonstrates the feasibility of an on-road solar-powered wireless charging system for electric vehicles.

Current development, optimisation strategies and future perspectives for lead-free dielectric ceramics in high field and high energy density capacitors.

To meet the United Nations' sustainable development goal of affordable and clean energy, there has been a growing need for low-cost, green, and safe energy storage technologies. High-field and energy-density capacitors have gained substantial attention from academics and industry, particularly for power electronics, where they will play a key role in optimising the performance of management systems in electric vehicles. The key figure of merit, energy density (Wrec), for high-field applications has dramatically increased year-on-year from 2020 to 2024, as evidenced by over 250 papers, demonstrating ever larger Wrec values. This review briefly introduces the background and principles of high energy density ceramics, but its focus is to provide constructive and comprehensive insight into the evaluation of Wrec, Emax, ΔP, and η, and more importantly, the normalised metrics, Wrec/Emax and Wrec/ΔP in lead-free dielectric ceramics. We also present several optimisation strategies for materials modification and process innovation that have been recently proposed before providing perspectives for the further development of high-field and high-energy density capacitors.

Enhancing 5G Vehicular Edge Computing Efficiency with the Hungarian Algorithm for Optimal Task Offloading

The rapid advancements in vehicular technologies have enabled modern autonomous vehicles (AVs) to perform complex tasks, such as augmented reality, real-time video surveillance, and automated parking. However, these applications require significant computational resources, which AVs often lack. To address this limitation, Vehicular Edge Computing (VEC) has emerged as a promising solution, allowing AVs to offload computational tasks to nearby vehicles and edge servers. This offloading process, however, is complicated by factors such as high vehicle mobility and intermittent connectivity. In this paper, we propose the Hungarian Algorithm for Task Offloading (HATO), a novel approach designed to optimize the distribution of computational tasks in 5G-enabled VEC systems. HATO leverages 5G’s low-latency, high-bandwidth communication to efficiently allocate tasks across edge servers and nearby vehicles, utilizing the Hungarian algorithm for optimal task assignment. By designating an edge server to gather contextual information from surrounding nodes and compute the best offloading scheme, HATO reduces computational burdens on AVs and minimizes task failures. Through extensive simulations in both urban and highway scenarios, HATO achieved a significant performance improvement, reducing execution time by up to 75.4% compared to existing methods under full 5G coverage in high-density environments. Additionally, HATO demonstrated zero energy constraint violations and achieved the highest task processing reliability, with an offloading success rate of 87.75% in high-density urban areas. These results highlight the potential of HATO to enhance the efficiency and scalability of VEC systems for autonomous vehicles.

Autonomous Landing Strategy for Micro-UAV with Mirrored Field-of-View Expansion

Positioning and autonomous landing are key technologies for implementing autonomous flight missions across various fields in unmanned aerial vehicle (UAV) systems. This research proposes a visual positioning method based on mirrored field-of-view expansion, providing a visual-based autonomous landing strategy for quadrotor micro-UAVs (MAVs). The forward-facing camera of the MAV obtains a top view through a view transformation lens while retaining the original forward view. Subsequently, the MAV camera captures the ground landing markers in real-time, and the pose of the MAV camera relative to the landing marker is obtained through a virtual-real image conversion technique and the R-PnP pose estimation algorithm. Then, using a camera-IMU external parameter calibration method, the pose transformation relationship between the UAV camera and the MAV body IMU is determined, thereby obtaining the position of the landing marker’s center point relative to the MAV’s body coordinate system. Finally, the ground station sends guidance commands to the UAV based on the position information to execute the autonomous landing task. The indoor and outdoor landing experiments with the DJI Tello MAV demonstrate that the proposed forward-facing camera mirrored field-of-view expansion method and landing marker detection and guidance algorithm successfully enable autonomous landing with an average accuracy of 0.06 m. The results show that this strategy meets the high-precision landing requirements of MAVs.

Data-Driven Approaches for State-of-Charge Estimation in Battery Electric Vehicles Using Machine and Deep Learning Techniques

One of the most important functions of the battery management system (BMS) in battery electric vehicle (BEV) applications is to estimate the state of charge (SOC). In this study, several machine and deep learning techniques, such as linear regression, support vector regressors (SVRs), k-nearest neighbor, random forest, extra trees regressor, extreme gradient boosting, random forest combined with gradient boosting, artificial neural networks (ANNs), convolutional neural networks, and long short-term memory (LSTM) networks, are investigated to develop a modeling framework for SOC estimation. The purpose of this study is to improve overall battery performance by examining how BEV operation affects battery deterioration. By using dynamic response simulation of lithium battery electric vehicles (BEVs) and lithium battery packs (LIBs), the proposed research provides realistic training data, enabling more accurate prediction of SOC using data-driven methods, which will have a crucial and effective impact on the safe operation of electric vehicles. The paper evaluates the performance of machine and deep learning algorithms using various metrics, including the R2 Score, median absolute error, mean square error, mean absolute error, and max error. All the simulation tests were performed using MATLAB 2023, Anaconda platform, and COMSOL Multiphysics.

Experimental evaluation on dynamic performance of medium–low-speed maglev vehicle running on low-positioned subgrade

ABSTRACT As a novel urban rail transit system with relatively low construction costs, medium–low-speed maglev transportation is currently experiencing rapid development in China. However, there have been rare studies on the experiments of medium–low-speed maglev vehicle passing curves and low-positioned subgrade. Therefore, this paper systematically conducts on-site dynamic tests on the Qingyuan Maglev Tourism Line. The experiment provides a detailed analysis of the dynamic characteristics of the vehicle system and subgrade under varying speeds up to 132 km/h. The study explores the impacts of operating speed, track layout, and type of girder structure. The results indicate that a significant increase in operating speed and the application of emergency braking intensify the dynamic response of the vehicle system. When passing through the R700m curve and low-positioned subgrade sections at different speeds, the primary vibration frequency of the sprung structure is below 2.5 hz, while the unsprung structure shows a wide frequency distribution. The peak frequencies of the vibration for the low-positioned subgrade are mainly distributed in the 60–140 hz range, and the vibration response of the girder remains at a low level. The Sperling index values, levitation gap, and lateral offset of the levitation electromagnet of the testing vehicle do not exceed 2.5, 4 mm, and 10 mm, respectively, indicating excellent ride comfort and stable levitation performance. The results of this test study provide a reliable assessment of the safety of the vehicle and subgrade system and would help precise modelling of vehicle and subgrade system in the future.

Evaluation of three kinetic energy storage systems

Abstract. This paper investigates recent advances in energy recovery systems (ERS) in automotive vehicles to reduce air pollution and impact on climate change. The three ERS systems: mechanical flywheel, regenerative braking, and regenerative electrically assisted (REAT) turbocharger are evaluated for their potential to reclaim energy wasted by the automobile thereby increasing range and efficiency of the vehicle. The methods of comparison are based on data sourced from current literature relevant to total energy recovery, system configuration, and application feasibility. This will identify regenerative braking as best for new vehicles to decrease fuel consumption and regenerative electrically assisted turbocharges (REAT) as best for retrofitting older vehicles. The paper will use the results to identify the energy recovery system with the greatest potential for immediate application and further research to overcome remaining challenges.

Research on the detection and recognition system of target vehicles based on fusion algorithm

<p>In modern society, the monitoring of vehicles is paramount for upholding traffic safety and order. This paper delves into a Graphical User Interface (GUI)-driven system for vehicle target detection and integration. This system seamlessly integrates three pivotal functionalities: vehicle type recognition, license plate recognition, and driver face recognition. It automates the vehicle inspection assessment process through an intuitive user interface. Specifically, for license plate recognition, the system leverages traditional computer vision techniques, including color and grayscale processing, radon transform, morphological operations, edge detection, character segmentation, and character recognition. The driver face recognition module incorporates methods such as image gray scaling, Gaussian filtering for denoising, face detection, and feature extraction. Meanwhile, vehicle type recognition is achieved by extracting Histogram of Oriented Gradients (HOG) features and utilizing a Support Vector Machine (SVM) classifier. Experimental findings highlight the system’s remarkable recognition accuracy, offering a highly efficient and dependable solution for the automated inspections of vehicles.</p>

Blockchain-based fast handover authentication protocol for Internet of Vehicles in small industrial parks

Autonomous vehicles safeguard the security and efficiency of Internet of Vehicles systems in small industrial parks by authenticating and exchanging real-time information with transportation infrastructure. Deploying a multi-server framework reduces the risk of message blocking and privacy information leakage from centralized services. However, in traditional handover authentication protocols, there are still potential security risks such as high-overhead performance issues and single point of failure attacks. Therefore, it is considered challenging to realize efficient authentication while protecting the privacy of vehicles. In this paper, we propose a secure and efficient handover authentication protocol for autonomous vehicles in a small industrial park to address the challenges. The protocol is based on blockchain and Pedersen verifiable secret sharing scheme, which not only ensures lightweight real-time interactions between autonomous vehicles and edge servers in multi-server environments, but also strictly protects the security and privacy of both vehicles and edge servers. We prove the semantic security of the protocol under the Real-Or-Random model and perform a informal analysis of its security attributes to show that it can withstand a wide range of malicious attacks. Performance evaluation shows that the proposed protocol satisfies more security requirements and has better computational efficiency and communication cost than other related protocols.

A Balanced Mission Planning for Multiple Unmanned Underwater Vehicles in Complex Marine Environments

The collaboration of a multiple unmanned underwater vehicles (multi-UUVs) system has attracted widespread attention in recent years, as it can overcome the limitations of a single UUV and enhance mission completion efficiency. Oriented towards patrol and exploration missions with multiple waypoints, this paper proposes a balanced mission planning strategy, aiming to improve mission quality while reducing mission time for multi-UUVs. Firstly, due to the uneven performance of the two optimization objectives, a quick initialization screening method is employed specifically for mission quality to reduce the mission space. Secondly, to ensure mission load distribution and collaboration among multi-UUVs, and ease the difficulty in solving the issues of mission allocation and route planning, a balanced bi-level mission planning method based on regional segmentation is proposed. Finally, applicable weight evaluation criteria are utilized to evaluate the feasible solution set and determine the optimal solution. The efficacy of the balanced mission planning strategy is substantiated through comprehensive numerical simulations in a complex 2D marine environment.

Enhanced Cross Layer Refinement Network for robust lane detection across diverse lighting and road conditions

With the rapid development of autonomous driving technology, lane detection, a key component of intelligent vehicle systems, is crucial for ensuring road safety and efficient vehicle navigation. In this paper, a new lane detection method is proposed to address the problem of degraded performance of existing lane detection methods when dealing with complex road environments. The proposed method evolves from the original Cross Layer Refinement Network (CLRNet) by incorporating two of our carefully designed core components: the Global Feature Optimizer (GFO) and the Adaptive Lane Geometry Aggregator (ALGA). The GFO is a multi-scale attention mechanism that mimics the human visual focusing ability, effectively filtering out unimportant information and focusing on the image regions most relevant to the task. The ALGA is a shape feature-aware aggregation module that utilizes the shape prior of lanes to enhance the correlation of anchor points in an image, better fusing global and local information. By integrating both components into CLRNet, an enhanced version called Enhanced CLRNet (E-CLRNet) is presented, which exhibits higher performance stability in complex roadway scenarios. Experiments on the CULane dataset reveal that E-CLRNet demonstrates superior performance stability over the original CLRNet in complex scenarios, including curves, shadows, missing lines, and dazzling light conditions. In particular, in the curves, the F1 score of E-CLRNet is improved by almost 3% over the original CLRNet. This study not only improves the accuracy and performance stability of lane detection but also provides a new solution for the application of autonomous driving technology in complex environments, which promotes the development of intelligent vehicle systems.

Designing LiDAR‐Detectable Dark‐Tone Materials with High Near‐Infrared Reflectivity for Autonomous Driving: A Comprehensive Review

AbstractAutonomous driving relies on the precise recognition of objects using light detection and ranging (LiDAR) technology, that operates at a specific wavelength of 905 nm. Black objects, such as carbon black used in vehicle coating, tend to absorb this specific wavelength significantly, which limits the performance of LiDAR sensors. To address this issue, researchers have explored creating dark‐toned materials that can be detected by LiDAR with high NIR reflectivity while maintaining a true blackness (L* < 20 based on the CIE color coordinates). These materials fall into two categories: organic and inorganic pigments. Organic pigments can be synthetically adjusted to achieve true blackness by manipulating their functional groups, but achieving high NIR reflectivity remains challenging, often requiring a bilayer structure with NIR‐reflective white base and an upper layer of organic black pigments. Additionally, the need for hydrophobic additives and resistance to degradation from sunlight further restricts their use. In the case of inorganic pigments, the desired LiDAR‐detectable properties can be obtained through careful control of their composition, structure, and morphology, allowing for single‐layer coatings with appropriate design. This review highlights recent advancements in developing organic and inorganic LiDAR‐detectable black pigments and outlines future material design strategies for autonomous vehicle systems.

Data-Driven Prescribed Performance Platooning Control Under Aperiodic Denial-of- Service Attacks

This article studies a data-driven prescribed performance platooning control method for nonlinear connected automated vehicle systems (CAVs) under aperiodic denial-of-service (DoS) attacks. Firstly, the dynamic linearization technique is employed to transform the nonlinear CAV system into an equivalent linearized data model. Secondly, to improve the system’s transient performance, a prescribed performance transformation (PPT) scheme is proposed to transform the constrained output into the unconstrained one. In addition, an attack compensation mechanism is designed to reduce the adverse impact. Combining the PPT scheme and the attack compensation mechanism, the data-driven adaptive platooning control scheme is proposed to achieve the vehicular tracking control task. Lastly, the merits of the developed control method are illustrated by an actual simulation.

Energy Management System and Control of Plug-in Hybrid Electric Vehicle Charging Stations in a Grid-Connected Microgrid

In the complex environment of microgrid deployments targeted at geographic regions, the seamless integration of renewable energy sources meets a variety of essential challenges. These include the unpredictable nature of renewable energy, characterized by intermittent energy generation, as well as ongoing fluctuations in load demand, the vulnerabilities present in distribution network failures, and the unpredictability that results from unfavorable weather conditions. These unexpected events work together to disturb the delicate balance between energy supply and demand, raising the alarming threat of system instability and, in the worst cases, the sudden advent of damaging blackouts. To address this issue, a fuzzy logic-based energy management system has been developed to monitor, manage, and optimize energy consumption in microgrids. This study focuses on the control of diesel generators and utility grids in a grid-connected microgrid which manages and evaluates numerous energy consumption and distribution features within a specified system, e.g., building or a microgrid. An energy management system is suggested based on fuzzy logic as a swift fix for complications with effective and competent resource management, and its presentation is compared with both the grid-connected and off-grid modes of the microgrid. In the end, the results exhibit that the proposed controller outclasses the predictable controllers in dropping sudden variations that arise during the addition of sources of renewable energy, supporting the refurbishment of the constant system.

Intelligent Robust Controllers Applied to an Auxiliary Energy System for Electric Vehicles

This paper presents two intelligent robust control strategies applied to manage the dynamics of a DC-DC bidirectional buck–boost converter, which is used in conjunction with a supercapacitor as an auxiliary energy system (AES) for regenerative braking in electric vehicles. The Neural Inverse Optimal Controller (NIOC) and the Neural Sliding Mode Controller (NSMC) utilize identifiers based on Recurrent High-Order Neural Networks (RHONNs) trained with the Extended Kalman Filter (EKF) to track voltage and current references from the converter circuit. Additionally, a driving cycle test tailored specifically for typical urban driving in electric vehicles (EVs) is implemented to validate the efficacy of the proposed controller and energy improvement strategy. The proposed NSMC and NIOC are compared with a PI controller; furthermore, an induction motor and its corresponding three-phase inverter are incorporated into the EV control scheme which is implemented in Matlab/Simulink using the “Simscape Electrical” toolbox. The Mean Squared Error (MSE) is computed to validate the performance of the neural controllers. Additionally, the improvement in the State of Charge (SOC) for an electric vehicle battery through the control of buck–boost converter dynamics is addressed. Finally, several robustness tests against parameter changes in the converter are conducted, along with their corresponding performance indices.

Multi-Step Temperature Prognosis of Lithium-Ion Batteries for Real Electric Vehicles Based on a Novel Bidirectional Mamba Network and Sequence Adaptive Correlation

The battery systems of electric vehicles (EVs) are directly impacted by battery temperature in terms of thermal runaway and failure. However, uncertainty about thermal runaway, dynamic conditions, and a dearth of high-quality data sets make modeling and predicting nonlinear multiscale electrochemical systems challenging. In this work, a novel Mamba network architecture called BMPTtery (Bidirectional Mamba Predictive Battery Temperature Representation) is proposed to overcome these challenges. First, a two-step hybrid model of trajectory piecewise–polynomial regression and exponentially weighted moving average is created and used to an operational dataset of EVs in order to handle the problem of noisy and incomplete time-series data. Each time series is then individually labeled to learn the representation and adaptive correlation of the multivariate series to capture battery performance variations in complex dynamic operating environments. Next, a prediction method with multiple steps based on the bidirectional Mamba is suggested. When combined with a failure diagnosis approach, this scheme can accurately detect heat failures due to excessive temperature, rapid temperature rise, and significant temperature differences. The experimental results demonstrate that the technique can accurately detect battery failures on a dataset of real operational EVs and predict the battery temperature one minute ahead of time with an MRE of 0.273%.

Investigation of Engine Exhaust Heat Recovery Systems Utilizing Thermal Battery Technology

Over 50% of an engine’s energy dissipates via the exhaust and cooling systems, leading to considerable energy loss. Effectively harnessing the waste heat generated by the engine is a critical avenue for enhancing energy efficiency. Traditional exhaust heat recovery systems are limited to real-time recovery of exhaust heat primarily for engine warm-up and fail to fully optimize exhaust heat utilization. This paper introduces a novel exhaust heat recovery system leveraging thermal battery technology, which utilizes phase change materials for both heat storage and reutilization. This innovation significantly minimizes the engine’s cold start duration and provides necessary heating for the cabin during start-up. Dynamic models and thermal management system models were constructed. Parameter optimization and calculations for essential components were conducted, and the fidelity of the simulation model was confirmed through experiments conducted under idle warm-up conditions. Four distinct operational modes for engine warm-up are proposed, and strategies for transitioning between these heating modes are established. A simulation analysis was performed across four varying operational scenarios: WLTC, NEDC, 40 km/h, and 80 km/h. The results indicated that the thermal battery-based exhaust heat recovery system notably reduces warm-up time and fuel consumption. In comparison to the cold start mode, the constant speed condition at 40 km/h showcased the most significant reduction in warm-up time, achieving an impressive 22.52% saving; the highest cumulative fuel consumption reduction was observed at a constant speed of 80 km/h, totaling 24.7%. This study offers theoretical foundations for further exploration of thermal management systems in new energy vehicles that incorporate heat storage and reutilization strategies utilizing thermal batteries.

Learning‐based tracking control of AUV: Mixed policy improvement and game‐based disturbance rejection

AbstractA mixed adaptive dynamic programming (ADP) scheme based on zero‐sum game theory is developed to address optimal control problems of autonomous underwater vehicle (AUV) systems subject to disturbances and safe constraints. By combining prior dynamic knowledge and actual sampled data, the proposed approach effectively mitigates the defect caused by the inaccurate dynamic model and significantly improves the training speed of the ADP algorithm. Initially, the dataset is enriched with sufficient reference data collected based on a nominal model without considering modelling bias. Also, the control object interacts with the real environment and continuously gathers adequate sampled data in the dataset. To comprehensively leverage the advantages of model‐based and model‐free methods during training, an adaptive tuning factor is introduced based on the dataset that possesses model‐referenced information and conforms to the distribution of the real‐world environment, which balances the influence of model‐based control law and data‐driven policy gradient on the direction of policy improvement. As a result, the proposed approach accelerates the learning speed compared to data‐driven methods, concurrently also enhancing the tracking performance in comparison to model‐based control methods. Moreover, the optimal control problem under disturbances is formulated as a zero‐sum game, and the actor‐critic‐disturbance framework is introduced to approximate the optimal control input, cost function, and disturbance policy, respectively. Furthermore, the convergence property of the proposed algorithm based on the value iteration method is analysed. Finally, an example of AUV path following based on the improved line‐of‐sight guidance is presented to demonstrate the effectiveness of the proposed method.

Responses of Vehicular Occupants During Emergency Braking and Aggressive Lane-Change Maneuvers.

To validate active human body models for investigating occupant safety in autonomous cars, it is crucial to comprehend the responses of vehicle occupants during evasive maneuvers. This study sought to quantify the behavior of midsize male and small female passenger seat occupants in both upright and reclined postures during three types of vehicle maneuvers. Volunteer tests were conducted using a minivan, where vehicle kinematics were measured with a DGPS sensor and occupant kinematics were captured with a stereo-vision motion capture system. Seatbelt loads, belt pull-out, and footrest reaction forces were also documented. The interior of the vehicle was 3D-scanned for modeling purposes. Results indicated that seatback angles significantly affected occupant kinematics, with small female volunteers displaying reduced head and torso movements, except during emergency braking with a upright posture seatback. Lane-change maneuvers revealed that maximum lateral head excursions varied depending on the maneuver's direction. The study concluded that seatback angles were crucial in determining the extent of occupant movement, with notable variations in head and torso excursions observed. The collected data assist in understanding occupant behavior during evasive maneuvers and contribute to the validation of human body models, offering essential insights for enhancing safety systems in autonomous vehicles.