Vegetation Index Research Articles

Visualizing Plant Responses: Novel Insights Possible Through Affordable Imaging Techniques in the Greenhouse.

Efficient and affordable plant phenotyping methods are an essential response to global climatic pressures. This study demonstrates the continued potential of consumer-grade photography to capture plant phenotypic traits in turfgrass and derive new calculations. Yet the effects of image corrections on individual calculations are often unreported. Turfgrass lysimeters were photographed over 8 weeks using a custom lightbox and consumer-grade camera. Subsequent imagery was analyzed for area of cover, color metrics, and sensitivity to image corrections. Findings were compared to active spectral reflectance data and previously reported measurements of visual quality, productivity, and water use. Results confirm that Red-Green-Blue imagery effectively measures plant treatment effects. Notable correlations were observed for corrected imagery, including between yellow fractional area with human visual quality ratings (r = -0.89), dark green color index with clipping productivity (r = 0.61), and an index combination term with water use (r = -0.60). The calculation of green fractional area correlated with Normalized Difference Vegetation Index (r = 0.91), and its RED reflectance spectra (r = -0.87). A new chromatic ratio correlated with Normalized Difference Red-Edge index (r = 0.90) and its Red-Edge reflectance spectra (r = -0.74), while a new calculation correlated strongest to Near-Infrared (r = 0.90). Additionally, the combined index term significantly differentiated between the treatment effects of date, mowing height, deficit irrigation, and their interactions (p < 0.001). Sensitivity and statistical analyses of typical image file formats and corrections that included JPEG, TIFF, geometric lens distortion correction, and color correction were conducted. Findings highlight the need for more standardization in image corrections and to determine the biological relevance of the new image data calculations.

High resolution (1-km) surface soil moisture generation from SMAP SSM by considering its difference between freezing and thawing periods in the source region of the Yellow River

Soil moisture (SM) is a critical component of the land surface hydrological cycle, significantly impacting various sectors such as hydrology, meteorology, and agriculture. Accurate, high-resolution SM data are essential for effective flood forecasting, water resource management, and understanding the soil freeze-thaw processes in cold regions. This study aims to generate 1 km resolution liquid surface SM (SSM) data with a twice-daily update frequency by downscaling SMAP Level-4 SSM data using random forest (RF) and multiple linear regression (MLR) in the source region of the Yellow River (SRYR), by considering the differences in SM changes between freezing and thawing periods. To obtain the SSM data, 16 downscaling schemes of both RF and MLR were designed for each of the three scenarios. In each downscaling process, both land surface temperature (LST) and normalized difference vegetation index (NDVI) were utilized in MLR and RF models, alongside various combinations of additional variables such as albedo, elevation, leaf area index (LAI), soil texture. Results showed that during the freezing period, RF produced superior SSM estimates when supplemented with NDVI, LST, albedo, elevation, LAI, and soil texture. MLR was more effective during the thawing period when paired with NDVI, LST, elevation, LAI, and soil texture. During the freezing period, the downscaled SMAP SSM exhibited average R, RMSE, ubRMSE of 0.76, 0.029 m3·m-3, and 0.023 m3·m-3, respectively, when compared with in-situ measurements. During the thawing period, the average R, MAE, RMSE, and ubRMSE between the downscaled SMAP SSM and in-situ measurements were 0.52, 0.057 m3·m-3, 0.067 m3·m-3, and 0.054 m3·m-3, respectively, compared to 0.45, 0.070 m3·m-3, 0.083 m3·m-3, and 0.060 m3·m-3 for the original SMAP SSM. Thus, the research significantly enhances both the accuracy and spatial resolution of SMAP SSM estimations, underscoring its vital role in advancing hydrological studies within the SRYR.

Radiometric calibration of UAV multispectral images under changing illumination conditions with a downwelling light sensor

AbstractUnmanned aerial vehicle (UAV)‐acquired multispectral images commonly suffer from radiometric inaccuracies due to changing illumination produced by intermittent cloud cover. This study addressed cloud shadow effects by integrating direct irradiance measurements from a downwelling light sensor into reflectance calculations. Two reflectance calibration methods were proposed as follows: (1) use of a single calibration reference panel for all images (Method 1) and (2) employment of a minimum distance classifier to assign color‐graded in‐field reflectance calibration targets to individual images based on their proximity in irradiance levels (Method 2). Images were acquired from 30 and 75 m flight altitudes with fixed‐exposure and auto‐exposure settings. Conventional photogrammetric calibration of UAV multispectral images inadequately addressed cloud shadows, resulting in orthomosaics with poor to moderate spatial uniformity (R2 = 0.70–0.92) and high mean absolute percentage error (MAPE = 13.52%–49.18%). The proposed calibration methods improved radiometric accuracy, yielding average R2 = 0.99 and 0.98 at 30 and 75 m images, respectively. Method 1 showed superior performance on the red‐edge and near infrared bands, and Method 2 worked best in the blue, green, and red bands. Post‐processing empirical line calibration of orthomosaics from Methods 1 and 2 reduced MAPE in reflectance estimation by at least 50% compared to conventional calibration. The clear sky reference histograms had lower Jensen–Shannon distance, higher Pearson's correlation, and improved intersection ratios with the histograms from the proposed methods, implying high similarity. Vegetation indices calculated with the proposed methods closely matched those from the reference orthomosaic, exhibiting significantly lower MAPE than conventionally calculated vegetation indices.

Comparative Impact of Fog and Rainfall on Vegetation in a Foggy Desert

AbstractFog is an important water source that alleviates vegetation water stress, especially for dryland ecosystems. Comprehensive knowledge of fog and rainfall effects can help us better understand dryland vegetation responses to current and future climates. However, the differences between fog and rainfall effects on vegetation are poorly understood. This study compared the effects of fog and rainfall on vegetation greenness changes based on the ground‐level meteorological observations in the Namib Desert and the satellite vegetation index. The vegetation index and its first derivative were utilized to indicate vegetation greenness and its change rate, respectively. Results showed that fog played a more significant role than rainfall in explaining vegetation greenness change rates, while accumulated rainfall was more important than fog in determining vegetation greenness. Soil temperature was an important factor in explaining vegetation greenness changes. These findings offer key insights into how fog and rainfall differentially contribute to vegetation greenness changes.

Identification of High-Photosynthetic-Efficiency Wheat Varieties Based on Multi-Source Remote Sensing from UAVs

Breeding high-photosynthetic-efficiency wheat varieties is a crucial link in safeguarding national food security. Traditional identification methods necessitate laborious on-site observation and measurement, consuming time and effort. Leveraging unmanned aerial vehicle (UAV) remote sensing technology to forecast photosynthetic indices opens up the potential for swiftly discerning high-photosynthetic-efficiency wheat varieties. The objective of this research is to develop a multi-stage predictive model encompassing nine photosynthetic indicators at the field scale for wheat breeding. These indices include soil and plant analyzer development (SPAD), leaf area index (LAI), net photosynthetic rate (Pn), transpiration rate (Tr), intercellular CO2 concentration (Ci), stomatal conductance (Gsw), photochemical quantum efficiency (PhiPS2), PSII reaction center excitation energy capture efficiency (Fv’/Fm’), and photochemical quenching coefficient (qP). The ultimate goal is to differentiate high-photosynthetic-efficiency wheat varieties through model-based predictions. This research gathered red, green, and blue spectrum (RGB) and multispectral (MS) images of eleven wheat varieties at the stages of jointing, heading, flowering, and filling. Vegetation indices (VIs) and texture features (TFs) were extracted as input variables. Three machine learning regression models (Support Vector Machine Regression (SVR), Random Forest (RF), and BP Neural Network (BPNN)) were employed to construct predictive models for nine photosynthetic indices across multiple growth stages. Furthermore, the research conducted principal component analysis (PCA) and membership function analysis on the predicted values of the optimal models for each indicator, established a comprehensive evaluation index for high photosynthetic efficiency, and employed cluster analysis to screen the test materials. The cluster analysis categorized the eleven varieties into three groups, with SH06144 and Yannong 188 demonstrating higher photosynthetic efficiency. The moderately efficient group comprises Liangxing 19, SH05604, SH06085, Chaomai 777, SH05292, Jimai 22, and Guigu 820, totaling seven varieties. Xinmai 916 and Jinong 114 fall into the category of lower photosynthetic efficiency, aligning closely with the results of the clustering analysis based on actual measurements. The findings suggest that employing UAV-based multi-source remote sensing technology to identify wheat varieties with high photosynthetic efficiency is feasible. The study results provide a theoretical basis for winter wheat phenotypic monitoring at the breeding field scale using UAV-based multi-source remote sensing, offering valuable insights for the advancement of smart breeding practices for high-photosynthetic-efficiency wheat varieties.

Above ground biomass estimation in the upper Blue Nile basin forests, North-Western Ethiopia

Forest ecosystems play a decisive role in the global climatic condition, as well as, provides a wide range of societal benefits, including fuel-wood, tourism, and ecosystem services are considered as one of the major sources of livelihood for the local people in the upper Blue Nile Basin. Therefore, rapid and accurate estimation of forest biomass is crucial for greatly reducing the uncertainty in carbon stock assessments, and for designing strategic forest management plans. Because, above-ground biomass (AGB) estimation is important in determining the management, environmental, and economic roles of forests in the Blue Nile basin. The study was aimed at estimating above-ground biomass in the Upper Blue Nile Basin forests by integrating field-measured data with predictors from Sentinel-2 image. The relationship between measured AGB and sentinel-2 derived vegetation indices and biophysical parameters showed a good correlation result (r value ranging from 0.67 to 0.74). A stepwise regression analysis was carried out in order to develop AGB estimation model by identifying the most important variable. The result demonstrated that, green normalized difference vegetation index, leaf area index, fraction of absorbed photosynthetic active radiation and fractional vegetation cover achieved good performance in predicting AGB with R2 value > 0.5. AGB was estimated with a coefficient of determination (R2) of 0.59 adjusted R2 of 0.618 and root mean square error of (RMSE) 38.36 t/ha in comparison to field observations. The maximum AGB value of 268.32 t/ha was estimated in the Alemsaga natural forest, which is a highly protected dense forest stand from any entrance and disturbance. Generally, integrating field data with optical remote sensing data provides more reliable result for AGB estimation. Moreover, it is also recommended to employ RADAR and LiDAR remote sensing data products together in order to attain more precise estimate results of AGB with great potential for forest resource monitoring and management.

Early Detection of Dendroctonus valens Infestation with UAV-Based Thermal and Hyperspectral Images

Dendroctonus valens is one of the main invasive pests in China, causing serious economic and ecological damage. Early detection and control of D. valens can help prevent further outbreaks. Based on unmanned aerial vehicle (UAV) thermal infrared and hyperspectral data, we compared the spectral characteristics of Pinus sylvestris var. mongolica in three states (healthy, early-infested, and dead), and constructed a classification model based on the random forest algorithm using four spectral datasets (reflectance, first derivative, second derivative, and spectral vegetation index) and one temperature parameter dataset. Our results indicated that the spectral differences between healthy and early-infested trees mainly occur in the near-infrared region, with dead trees showing different characteristics. While it was effective to distinguish healthy from early-infested trees using spectral data alone, the addition of a temperature parameter further improved classification accuracy across all datasets. The combination of the spectral vegetation index and temperature parameter achieved the highest accuracy at 93.75%, which is 3.13% higher than using the spectral vegetation index alone. This combination also significantly improved early detection precision by 13.89%. Our findings demonstrated the applicability of UAV-based thermal infrared and combined hyperspectral datasets in monitoring D. valens early-infested trees, providing important technical support for the scientific prevention and control of D. valens.

How did COVID-19 case distribution associate with the urban built environment? A community-level exploration in Shanghai focusing on non-linear relationship.

Several associations between the built environment and COVID-19 case distribution have been identified in previous studies. However, few studies have explored the non-linear associations between the built environment and COVID-19 at the community level. This study employed the March 2022 Shanghai COVID-19 pandemic as a case study to examine the association between built-environment characteristics and the incidence of COVID-19. A non-linear modeling approach, namely the boosted regression tree model, was used to investigate this relationship. A multi-scale study was conducted at the community level based on buffers of 5-minute, 10-minute, and 15-minute walking distances. The main findings are as follows: (1) Relationships between built environment variables and COVID-19 case distribution vary across scales of analysis at the neighborhood level. (2) Significant non-linear associations exist between built-environment characteristics and COVID-19 case distribution at different scales. Population, housing price, normalized difference vegetation index, Shannon's diversity index, number of bus stops, floor-area ratio, and distance from the city center played important roles at different scales. These non-linear results provide a more refined reference for pandemic responses at different scales from an urban planning perspective and offer useful recommendations for a sustainable COVID-19 post-pandemic response.

The combined effects of heatwaves, air pollution and greenery on the risk of frailty: a national cohort study

The associations between heatwaves and frailty, as well as the joint effects of heatwaves with air pollution and greenery, are currently unknown. This study leverages data from the China Health and Retirement Longitudinal Study (CHARLS), which collected information from 6,400 older adults between 2011 and 2018. Our outcome variable was frailty, as measured by the frailty index (FI > 0.21). Heatwaves were defined based on maximum temperature, incorporating four thresholds (≥ 97.5%, 97.5%, 92.5%, and 90%) and three durations (≥ 2, 3, and 4 days). These variables were considered as time-varying variables, representing the one-year exposure preceding survival events. Fine particulate matter (PM2.5) and greenery (normalized difference vegetation index (NDVI)) were utilized as indicators of air pollution and greenery exposure, respectively, and were treated as time-varying indicators concurrent with heatwaves.Time-varying Cox proportional hazards models were employed to assess the independent effects, as well as the multiplicative and additive interactions of heatwaves, air pollution, and greenery on the risk of frailty. These effects were quantified using hazard ratios (HRs), a traditional product term representing the ratio of HRs, and the relative excess risk due to interaction (RERI). Our findings indicate that heatwaves are associated with an increased risk of frailty, with HRs ranging from 1.035 (95% CI: 1.006–1.064) to 1.063 (95% CI: 1.028–1.101). We observed both a positive multiplicative interaction (HRs > 1) and an additive interaction (RERI > 0) between high level PM2.5 concentration, lack of greenery, and heatwaves. This study reveals that the combined effects exacerbate the adverse impact of heatwaves on the risk of frailty. Moreover, the combined effects of heatwaves, air pollution, and greenery exposure on frailty risk vary across age, gender, and educational attainment.

A synthesis of machine learning and internet of things in developing autonomous fleets of heterogeneous unmanned aerial vehicles for enhancing the regenerative farming cycle

AbstractThe use of Unmanned Aerial Vehicles (UAVs) for agricultural monitoring and management offers additional advantages over traditional methods, ranging from cost reduction to environmental protection, especially when they utilize Machine Learning (ML) methods, and Internet of Things (IoT). This article presents an autonomous fleet of heterogeneous UAVs for use in regenerative farming the result of a synthesis of Deep Reinforcement Learning (DRL), Ant Colony Optimization (ACO) and IoT. The resulting aerial framework uses DRL for fleet autonomy and ACO for fleet synchronization and task scheduling inflight. A 5G Multiple Input Multiple Output-Long Range (MIMO-LoRa) antenna enhances data rate transmission and link reliability. The aerial framework, which has been originally prototyped as a simulation to test the concept, is now developed into a functional proof-of-concept of autonomous fleets of heterogeneous UAVs. For assessing performance, the paper uses Normalized Difference Vegetation Index (NDVI), Mean Squared Error (MSE) and Received Signal Strength Index (RSSI). The 5G MIMO-LoRa antenna produces improved results with four key performance indicators: Reflection Coefficient (S11), Cumulative Distribution Functions (CDF), Power Spectral Density Ratio (Eb/No), and Bit Error Rate (BER).

Early Detection of Cassava Vascular Bacteriosis (Xanthomonas Axonopodis pv. Manihotis) by Visible Near-infrared Spectroscopy Before the Appearance of Critical Symptoms

Cassava is a crucial crop for food and nutritional security. It is an important source of carbohydrates in African countries. Cassava crops can sometimes be infected by leaf diseases, affecting overall production and reducing farmers&amp;#39; incomes. Early detection is therefore essential to reduce the impact of these diseases. Light reflections from leaves are known to convey information about plant health. In this study, healthy and inoculated cassava were detected from the reflections obtained from the leaves using a USB 4000 spectrometer with a spectral range of (350-1050) nm. Artificial neural networks (ANNs) and nearest neighbours (KNNs) were used with principal components and vegetation indices as input for classification. Various performance metrics, i.e. Precision, Recall, Accuracy and F1_score for KNN, Accuracy, RMSE and R2 for ANN were calculated to evaluate the different established models. Using the principal components (PC1, PC2) we obtained the best models with the ANNs with the following metrics (R2=0.9678; RMSE=0.0146; Accuracy =98.30%) for the variety IM 84 and (R2=0.9291; RMSE=0.0354 Accuracy=91.30%) for the Yac&amp;eacute; variety. With vegetation indices, the best performing models were obtained with KNN whose input parameters are RatiodRE_703 ((Accuracy =92.50% and F1-score=0.9449) and fWBI ((Accuracy =90% and F1-score=0.9326) for Yac&amp;eacute; and vog 3 (Accuracy=100% and F1-score=1), DD (Accuracy=100% and F1_score=1) and dNIRmin920_980 (Accuracy=95% and F1_score=0.9373) for the IM 84. Overall, the results showed that leaf spectral reflectance can be used successfully for the early detection of cassava bacterial blight.

Estimation Stand Volume, Basal Area and Quadratic Mean Diameter Using Landsat 8 OLI and Sentinel‐2 Satellite Image With Different Machine Learning Techniques

ABSTRACTThe data required for sustainable forest planning is provided by traditional forest inventories, which are labor, time, and cost‐intensive. Providing this data quickly, reliably, and accurately is crucial for planners and researchers. The objective of this study was to predict stand basal area (BA), stand volume (V), and quadratic mean diameter (dq) by leveraging vegetation indices (VIs) and reflectance (R) derived from Landsat 8 OLI and Sentinel 2 satellite images, along with topographic (T) data obtained from ALOS‐PALSAR satellite imagery. Forest inventory data for a total of 250 sample plots were used for modeling in the study. Stand parameters were estimated using support vector machines (SVM), multiple linear regression (MLR), decision tree (DT), and random forest (RF) algorithms. In modeling V, BA, and dq, both individual and combinations of R, VIs, and T values obtained from satellite imagery were used as independent variables. Using the generated datasets, each of the stand parameters was modeled separately with MLR, SVM, RF, and DT algorithms, and the success of the models was compared to determine the modeling technique and dataset with the highest success for the relevant parameter. The results showed that for each stand parameter, the highest model success was achieved in the combined dataset, which was created by combining all datasets. However, in terms of modeling techniques, the highest success for each stand parameter was achieved with different modeling techniques. The highest success for V is obtained in the model using the SVM method (R2 = 0.78; RMSE = 0.28 m3/ha), the RF method yielded the highest model performance for BA (R2 = 0.70; RMSE = 2.53 m2/ha), and finally, the highest success for dq was obtained in the DT method (R2 = 0.74; RMSE = 0.02 cm). In general, the datasets obtained from Sentinel 2 images showed higher model success than the datasets obtained from Landsat 8 OLI images.

The evolution of agricultural areas in a Saharan region by satellite imagery (landsat, sentinel) case of the Oued Righ region, Algeria

During this study, our objective was to systematically identify predominant spatiotemporal trends related to the evolution of agricultural perimeters in a Saharan region, specifically the oases of Oued Righ in Algeria. To achieve this, we used satellite imagery data. The chronological sequence of satellite images covering the Oued Righ region, situated in the Northeastern Sahara of Algeria, was meticulously established. Spatial remote sensing proved to be an essential tool, providing us with up-to-date and geo-referenced data regarding vegetation. We used a time series of Landsat (8, 4-5, 7) and Sentinel 2 images covering Oued Righ from 1984 to 2024, using bands 4, 3, 2, and 5, 4, 3 infrared. These images offered precise insights into the actual vegetation development in the study area, eliminating any guesswork. Our analysis relied on vegetation indices, notably the NDVI (Normalized Difference Vegetation Index), allowing us to objectively and scientifically monitor the evolution of this perimeter.

Identification of optimal locations for green space initiatives through GIS-based multi-criteria analysis and the analytical hierarchy process

Urban green spaces play a vital role in enhancing the well-being of communities and mitigating environmental challenges such as air pollution and global warming. Despite their importance, effective models to allocate these green spaces are often overlooked, particularly in developing countries. This study utilises GIS-based Multi-Criteria Analysis and the Analytical Hierarchy Process to recommend optimal locations for green space interventions in Lilongwe City, Malawi, based on nine factors: population density, proximity to roads, slope, Digital Elevation Model (DEM), Normalized Difference Vegetative Index (NDVI), land cover, existing green space, proximity to water bodies, and nitrogen dioxide concentration. The results show that 0.57% (23,776 hectares) of Lilongwe city is highly suitable while 14.50% (604,596 hectares) is unsuitable for green space interventions, where population density was the most determining factor. The suitability varied across the city, with highly suitable areas predominantly located in the southern part. The study highlights the importance of informed decision-making in urban green space planning, setting a standard for equitable access to green spaces and sustainable urban development.

Spatiotemporal variations and driving factors of evapotranspiration in the Yunnan-Guizhou Plateau from 2003 to 2020

ABSTRACT Evapotranspiration (ET) is vital for the Earth's energy and water balance, particularly influenced by global climate change. The Yunnan-Guizhou Plateau (YGP), characterized by abundant water resources and intricate terrain, has been a subject of study. However, previous research often overlooked intra-annual climate variations in ET. This study employed high-spatiotemporal resolution ET data from 2003 to 2020 to quantitatively analyze the spatiotemporal characteristics of ET on the YGP. The annual ET showed an increasing trend of 0.18 mm/year, with monthly ET increases in January, March, November, and December, mainly influenced by vegetation transpiration, which accounts for 56% of ET. Breakpoints in ET trends and seasonal components occurred in January 2007 and June 2018. The geodetector model assessed the impact of 15 driving factors on ET, with net radiation and vegetation index playing dominant roles with q-values of 0.29 and 0.24. Factor impacts varied seasonally, with greater influence in the dry season (q-value of 0.53 for net radiation in January) and lesser in the rainy season (q-value of 0.08 in August). Pearson correlation analysis indicated that different driving factors influenced ET in different months. These findings enhance understanding of plateau ET responses to climate change mechanisms.

Revealing Cropping Intensity Dynamics Using High-Resolution Imagery: A Case Study in Shaanxi Province, China

Reliable and continuous information on cropping intensity is crucial for assessing cropland utilization and formulating policies regarding cropland protection and management. However, there is still a lack of high-resolution cropping intensity maps for recent years, particularly in fragmented agricultural regions. In this study, we combined Landsat-8 and Sentinel-2 imagery to generate cropping intensity maps from 2019 to 2023 at a 10 m resolution for Shaanxi Province, China. First, the satellite imagery was harmonized to construct 10-day composite enhanced vegetation index (EVI) time series. Then, the cropping intensity was determined by counting the number of valid EVI peaks within a year. Assessment based on 578 sample points showed a high level of accuracy, with overall accuracy and Kappa coefficient values exceeding 0.96 and 0.93, respectively. We further analyzed the spatiotemporal patterns of cropping intensity and generated a map of abandoned cropland in Shaanxi. The results indicated that cropland in Shaanxi Province was mainly utilized for single-cropping (52.9% of area), followed by double-cropping (35.2%), with non-cropping accounting for 11.9%. Cropping intensity tended to be lower in the north and higher in the south. Temporally, the average cropping intensity of Shaanxi increased from 1.1 to over 1.3 from 2019 to 2023. Despite this upward trend, large areas of cropland were abandoned in northern Shaanxi. These results demonstrate the potential of utilizing Landsat-8 and Sentinel-2 imagery to identify cropping intensity dynamics in fragmented agricultural regions and to guide more efficient cropland management.

Monitoring Crop Condition at Gield Scales and at a Daily Time Step Using Synthetic Aperture Radar (SAR)

Operations that rely on optically-based Normalized Difference Vegetation Index (NDVI) to track crop productivity, are negatively impacted by cloud cover. In this research, parameters from Synthetic Aperture Radar (SAR) imagery were calibrated to NDVI with the targeted outcome to integrate SAR into Canadian crop monitoring services. Data from fully polarimetric RADARSAT-2 and dual-polarization Sentinel-1B imagery were calibrated to Sentinel-2 NDVI. Random Forest Regression (RFR) and Least Squares Boosting (LSBoost) were tested to calibrate SAR to NDVI (SARcal-NDVI) for six crops (corn, canola, soybeans, wheat, oats and barley). RADARSAT-2 provided the best fit with R2 exceeding 0.84 for canola, 0.87 for wheat and 0.90 for corn and soybeans. Correlations were lower for oats (R2 of 0.72–0.77) and barley (R2 of 0.43–0.64) due to a limited number of fields. Although a global model yielded lower correlations (R2 of 0.80), this model would be easier to implement into operations. Total power, the first and second eigenvalues and VH backscatter were important in reducing model error. The SARcal-NDVI and Growing Degree Days were then integrated into a Crop Structure Dynamic Model to produce daily estimates of crop condition, at field scales. The next step is to test if these daily estimates of crop condition can improve crop yield forecasting for the Canadian agriculture sector.

Exploring a GIS-based analytic hierarchy process for spatial flood risk assessment in Egypt: a case study of the Damietta branch

Floods are the most common and costly disasters worldwide, while spatial flood risk assessment is still challenging due to fewer observations and method limitations. In this study, the flood risk zonation in the Nile districts of the Damietta branch, Egypt, is delineated and assessed by integrating remote sensing with a geographic information system, and an analytical hierarchy process (AHP). Twelve thematic layers (elevation, slope, normalized difference vegetation index, topographic wetness index, modified normalized difference water index, topographic positioning index, stream power index, modified Fournier index, drainage density, distance to the river, sediment transport index, and lithology) are used for producing flood susceptibility zonation (FSZ) and six parameters (total population, distance to hospital, land use/land cover, population density, road density, and distance to road) are utilized for producing flood vulnerability zonation. Multicollinearity analysis is applied to identify highly correlated independent variables. Sensitivity studies have been used to assess the effectiveness of the AHP model. The results indicate that the high and very high flood risk classes cover 21.40% and 8.26% of the area, respectively. In 14.07%, 27.01%, and 29.26% of the research area, respectively, flood risk zones classified as very low, low, and moderate are found. Finally, FSZ is validated using the receiver operating characteristics curve and area under curve (AUC) analysis. A higher AUC value (0.741) in the validation findings demonstrated the validity of this AHP approach. The results of this study will help planners, hydrologists, and managers of water resources manage areas that are susceptible to flooding and reduce potential harm.

Vegetation monitoring in mining area using canopy reflectance and landsat8 oli image

The aim of this study is to find out the vegetation monitoring in mining areas which is of great significance in grasping the ecological environment status of mining areas. As the first target of spectral reflection, the vegetation canopy directly affects the results of spectral reception. Leaf Angle Distribution (LAD) is a key canopy structural parameter, which directly determines the amount of solar radiation intercepted by the canopy. Taking the relationship between the effect of leaf inclination angle on vegetation canopy reflectance and NDVI as an entry point, the study monitored and analyzed the vegetation in Dexing mining area, China, from 2013 to 2018 by NDVI, based on which the Copper Stress Vegetation Index (CSVI), which is applicable to the narrow wavelength band of remote sensing imagery, was evaluated whether it could be applied to the wide wavelength band. The results show that the NDVI value of the horizontal distribution is significantly higher than that of other leaf inclination distributions, and the NDVI in the direction of the horizontal distribution is 0.82, while the NDVI in the direction of the hi-straight distribution is 0.75; the NDVI of the mining area decreases gradually with the increase of the area of the mining area, and the correlation coefficients of the two groups of CSVI based on the wide and narrow bands are not large, which is not suitable for the vegetation monitoring by using the Landsat8 OLI imagery. Wide band is less applicable for vegetation monitoring. Bangladesh J. Bot. 53(3): 835-847, 2024 (September) Special

Archaeological cognition of the Eastern mausoleum of Qin state using integrated space-ground observation tools

The Eastern Mausoleum of Qin State is a significant component of the Qin Dynasty's royal tombs, reflecting the social development level during the Warring States period (475 BC ~ 221 BC) in China. At the onset of our investigation, we mapped the site's boundaries utilizing Corona satellite imagery and employed the Normalized Difference Vegetation Index (NDVI) and Normalized Difference Moisture Index (NDMI) to identify archaeological features. Additionally, this study is the first to propose the use of thermal infrared band data from the SDGSAT-1 satellite to explore thermal archaeological traces, demonstrating their viability for archaeological site analysis. Subsequently, electromagnetic (EM) prospection was utilized to validate the presence of an ancient burial chamber passage. Landscape monitoring and analysis of the No.1 Mausoleum were performed using Corona and Google Earth images, revealing the accuracy of the Geomancy Theory of Chinese mausoleums through dynamic remote sensing of surface changes. Furthermore, our employment of space-to-ground observational modalities and resultant Digital Elevation Models (DEM) have been used to provided new insights into the application of Remote Sensing (RS) and Geomancy in archaeology, thereby emphasizing the pivotal role of site selection in heritage preservation. This research underscores the promise of synergistic space-ground observations in both exploiting the archaeological riches of cultural heritage sites and ensuring the enduring conservation of these irreplaceable patrimonial assets.