Vascularized Adipose Tissue Research Articles

Adipose tissue engineering using adipose-derived stem cells enclosed within an injectable carboxymethylcellulose-based hydrogel

In situ gelation of an aqueous solution of carboxymethylcellulose derivative bearing phenolic hydroxyl groups (CMC-Ph) that contained suspended adipose-derived stem cells (ASCs) was studied in vitro and in vivo for evaluating feasibility in adipose tissue-engineering strategies. The rat ASCs that were enclosed in the CMC-Ph gels through a horseradish peroxidase-catalysed reaction showed 92.8% viability, good proliferation and adipogenic differentiation in vitro. Ten weeks after the subcutaneous injection of ASCs-suspending CMC-Ph for in situ gelation, clearly visible new vascularized adipose tissue formed at the injection site. The number of blood vessels and the area occupied by adipose tissues were five and eight times larger, respectively, than those found in the implanted acellular gel. The adipogenesis and neovascularization were further enhanced by incorporation of fibroblast growth factor into the CMC-Ph gel containing ASCs.

Vascularized Adipose Tissue Flaps Engineered With Minicircle DNA Provide a Platform for Sustainable Transgene Expression

Vascularized Adipose Tissue Flaps Engineered With Minicircle DNA Provide a Platform for Sustainable Transgene Expression

Vascularization of prevascularized and non-prevascularized fibrin-based human adipose tissue constructs after implantation in nude mice

Adipose regeneration strategies have been hampered by the inability to supply an adequate vascular supply following implantation. Vascularization in vitro, also called prevascularization, is a promising method that could promote the vascularization of engineered adipose tissue constructs upon implantation. In this study we compared the ability of prevascularized-to-non-prevascularized fibrin-based human adipose tissue to promote vascularization. Human adipose tissue-derived stromal cells (ASCs) and different mixtures (1:1, 1:2 and 1:5) of ASCs with human umbilical vein endothelial cells (HUVECs) were cultured in fibrin at two different densities (1.0 × 10(6) and 10 × 10(6) cells/ml) for 7 days. Histological analysis revealed that prevascular structures formed in 1:5 ASC/HUVEC fibrin-based constructs seeded with a total of 10 × 10(6) cells/ml. These constructs and ASC-only constructs were implanted subcutaneously in athymic mice for 7 days and generated lipid-containing grafts. The numbers and densities of blood vessels within the ASC/HUVEC constructs were similar to those of ASC-only constructs. Furthermore, immunostaining studies demonstrated human-derived vasculature within a few of the ASC/HUVEC and ASC-only constructs. A subset of this human-derived vasculature contained erythrocytes, indicating integration with the host vasculature. In conclusion, our study indicated no difference in the rate of vascularization of prevascularized ASC/HUVEC and non-prevascularized ASC-only fibrin-based constructs, suggesting that prevascularization of these fibrin-based constructs does not promote vascularization. Our results further indicated that not only endothelial cells, but also ASCs may contribute to the formation of vascular lumina upon implantation. This finding is interesting, since it demonstrates the possibility of vascularized adipose tissue engineering from a single cell source.

Hierarchically Assembled Mesenchymal Stem Cell Spheroids Using Biomimicking Nanofilaments and Microstructured Scaffolds for Vascularized Adipose Tissue Engineering

AbstractComposite multicellular spheroids composed of mesenchymal stem cells (MSCs) and synthetic biodegradable nanofilaments are fabricated. Extracellular‐matrix‐mimicking nanofilaments, prepared from transverse fragmentation of semicrystalline poly(L‐lactic acid) nanofibers and subsequent surface modification with cell adhesive peptides, are used to form composite multicellular spheroids with MSCs by cellular self‐assembly. The size of the composite spheroids could be readily controlled with the integrated amount of the nanofilaments. The composite spheroids show enhanced adipogenic potential compared to homotypic spheroids. The resultant spheroids are used as building blocks for 3D biohybrid construction with the assistance of a microstructured scaffold fabricated by a direct polymer melt deposition process. An angiogenic growth factor, basic fibroblast growth factor, is also locally delivered in a sustained fashion from the heparinized scaffold surface for facile neovascularization of adipogenic tissue. The produced multiscaled and multifunctional hybrid MSC construct enable the successful formation of vascularized adipose tissue in vivo.

Hybrid Adipogenic Implants from Adipose Stem Cells for Soft Tissue Reconstruction In Vivo

A critical barrier in tissue regeneration is scale-up. Bioengineered adipose tissue implants have been limited to ∼10 mm in diameter. Here, we devised a 40-mm hybrid implant with a cellular layer encapsulating an acellular core. Human adipose-derived stem cells (ASCs) were seeded in alginate. Poly(ethylene)glycol-diacrylate (PEGDA) was photopolymerized into 40-mm-diameter dome-shaped gel. Alginate-ASC suspension was painted onto PEGDA surface. Cultivation of hybrid constructs ex vivo in adipogenic medium for 28 days showed no delamination. Upon 4-week in vivo implantation in athymic rats, hybrid implants well integrated with host subcutaneous tissue and could only be surgically separated. Vascularized adipose tissue regenerated in the thin, painted alginate layer only if ASC-derived adipogenic cells were delivered. Contrastingly, abundant fibrous tissue filled ASC-free alginate layer encapsulating the acellular PEGDA core in control implants. Human-specific peroxisome proliferator-activated receptor-γ (PPAR-γ) was detected in human ASC-seeded implants. Interestingly, rat-specific PPAR-γ was absent in either human ASC-seeded or ASC-free implants. Glycerol content in ASC-delivered implants was significantly greater than that in ASC-free implants. Remarkably, rat-specific platelet/endothelial cell adhesion molecule (PECAM) was detected in both ASC-seeded and ASC-free implants, suggesting anastomosis of vasculature in bioengineered tissue with host blood vessels. Human nuclear staining revealed that a substantial number of adipocytes were of human origin, whereas endothelial cells of vascular wall were of chemaric human and nonhuman (rat host) origins. Together, hybrid implant appears to be a viable scale-up approach with volumetric retention attributable primarily to the acellular biomaterial core, and yet has a biologically viable cellular interface with the host. The present 40-mm soft tissue implant may serve as a biomaterial tissue expander for reconstruction of lumpectomy defects.

The effect of FGF-1 loaded alginate microbeads on neovascularization and adipogenesis in a vascular pedicle model of adipose tissue engineering

Engineered vascularized adipose tissue could serve as an alternative to traditional tissue reconstruction procedures. Adipose formation occurs in a coordinated fashion with neovascularization. Previous studies have shown that extracellular matrix-based materials supplemented with factors that stimulate neovascularization promote adipogenesis in a number of animal models. The present study examines the ability of fibroblast growth factor (FGF-1) delivered from alginate microbeads to induce neovascularization and adipogenesis in type I collagen gels in a vascular pedicle model of adipose tissue engineering. FGF-1 loaded microbeads stimulated greater vascular network formation in an in vitro 3D co-culture model than a single bolus of FGF-1. In in vivo studies, FGF-1 loaded beads suspended in collagen and implanted in a chamber surrounding the exposed femoral pedicle of a rat resulted in a significant increase in vascular density at 1 and 6 weeks in comparison to bolus administration of FGF-1. Staining for smooth muscle actin showed that over 48% of vessels had associated mural cells. While an increase in neovascularization was achieved, there was less than 3% adipose under any condition. These results show that delivery of FGF-1 from alginate beads stimulated a more persistent neovascularization response than bolus FGF-1 both in vitro and in vivo. However, unlike previous studies, this increased neovascularization did not result in adipogenesis. Future studies need to provide a better understanding of the relationship between neovascularization and adipogenesis in order to design advanced tissue engineering therapies.

Materials for engineering vascularized adipose tissue

Loss of adipose tissue can occur due to congenital and acquired lipoatrophies, trauma, tumor resection, and chronic disease. Clinically, it is difficult to regenerate or reconstruct adipose tissue. The extensive microvsacular network present in adipose, and the sensitivity of adipocytes to hypoxia, hinder the success of typical tissue transfer procedures. Materials that promote the formation of vascularized adipose tissue may offer alternatives to current clinical treatment options. A number of synthetic and natural biomaterials common in tissue engineering have been investigated as scaffolds for adipose regeneration. While these materials have shown some promise they do not account for the unique extracellular microenvironment of adipose. Adipose derived hydrogels more closely approximate the physical and chemical microenvironment of adipose tissue, promote preadipocyte differentiation and vessel assembly in vitro, and stimulate vascularized adipose formation in vivo. The combination of these materials with techniques that promote rapid and stable vascularization could lead to new techniques for engineering stable, vascularized adipose tissue for clinical application. In this review we discuss materials used for adipose tissue engineering and strategies for vascularization of these scaffolds. Clinical Relevance Materials that promote formation of vascularized adipose tissue have the potential to serve as alternatives or supplements to existing treatment options, for adipose defects or deficiencies resulting from chronic disease, lipoatrophies, trauma, and tumor resection.

Facial contour reconstruction with temporoparietal prelaminated dermal–adipose flaps

Compared with those for free-fat grafts, resorption rates for vascularized adipose tissue transfers are very low. We analysed benefits of transfer of dermal-adipose grafts after prelamination upon the temporal fascia in reconstruction of facial contour defects. Among 8 patients operated on between 2005 and 2008, facial contour anomalies had resulted from trauma in 5, while the remaining 3 had abnormalities with a congenital, postinfectious, or iatrogenic aetiology. In the first-stage operation, a dermal-adipose graft was taken from the inguinal region and prelamination upon the superior surface of the temporal fascia. After 5.5 months, the prelaminated dermal-adipose-fascial flap was raised as an island flap, passed through a subcutaneous tunnel in the temporal region, and set into the defect site. Satisfactory cosmetic results were achieved in all patients. Except for a temporary frontal nerve palsy in 1 patient, no early or late complications resulted from this procedure. Prelamination of dermal-adipose grafts upon the temporoparietal fascia is useful in reconstruction of soft tissue defects requiring volume augmentation.

In Vitro3D Model for Human Vascularized Adipose Tissue

The clinical need for both three-dimensional (3D) soft tissue replacements and in vitro adipose tissue models continues to grow. In this study, we evaluated structural and functional characteristics of an in vitro 3D coculture model of vascularized adipose tissue. Tomato red-infected human adipose tissue-derived mesenchymal stem cells (hASCs) and green fluorescence protein-infected human umbilical vein endothelial cells were cocultured on 3D aqueous-derived silk scaffolds for 2 weeks. Confocal microscopy images demonstrated viability of cocultures and organization of both cell types over time. Endothelial cells aligned with time, and further histological analyses revealed continuous endothelial lumen formation in both differentiated and undifferentiated cocultures. Differentiated adipose cocultures secreted significantly higher levels of leptin than undifferentiated cocultures at 1 and 2 weeks. Additionally, lipid accumulation was demonstrated with Oil Red O staining, where positive staining was higher in the differentiated cocultures. A promising in vitro approach for the vascularization of tissue-engineered adipose tissue, and the ability to vascularize a construct containing hASCs was demonstrated. The strategy outlined provides a basis for the formation of other in vitro vascularized tissues as well as a path forward for the sustainable formation of soft tissue due to the use of slowly degrading silk scaffolds.

MSC frequency correlates with blood vessel density in equine adipose tissue.

Mesenchymal stem cells (MSCs) are multipotent cells that have the capacity to develop into different mature mesenchymal cell types. They were originally isolated from bone marrow, but MSC-like cells have also been isolated from other tissues. The common feature of all of these tissues is that they all house blood vessels. It is, thus, possible that MSCs are associated with perivascular locations. The objective of this work was to test the hypothesis that MSCs are associated with blood vessels by verifying if MSC frequency positively correlates with blood vessel density. To this end, samples from highly and poorly vascularized adipose tissue sites of two equine donors were collected and processed for histology and cell isolation. MSC frequency in these samples was estimated by means of CFU-F assays, which were performed under MSC conditions. Culture-adherent cells from equine adipose tissue and bone marrow were culture expanded, tested for differentiation into mesenchymal cell types in vitro, and implanted in vivo in porous ceramic vehicles to assess their osteogenic capacity, using human MSCs and brain pericytes as controls. The differentiation assays showed a difference between adipose tissue-derived cells as compared to equine bone marrow MSCs. While differences in CFU-F frequencies between both donors were evident, the CFU-F numbers correlated directly with blood vessel densities (r(2) = 0.86). We consider these preliminary data as further evidence linking MSCs to blood vessels.

High glucose induces adipogenic differentiation of muscle-derived stem cells

Regeneration of mesenchymal tissues depends on a resident stem cell population, that in most cases remains elusive in terms of cellular identity and differentiation signals. We here show that primary cell cultures derived from adipose tissue or skeletal muscle differentiate into adipocytes when cultured in high glucose. High glucose induces ROS production and PKCbeta activation. These two events appear crucial steps in this differentiation process that can be directly induced by oxidizing agents and inhibited by PKCbeta siRNA silencing. The differentiated adipocytes, when implanted in vivo, form viable and vascularized adipose tissue. Overall, the data highlight a previously uncharacterized differentiation route triggered by high glucose that drives not only resident stem cells of the adipose tissue but also uncommitted precursors present in muscle cells to form adipose depots. This process may represent a feed-forward cycle between the regional increase in adiposity and insulin resistance that plays a key role in the pathogenesis of diabetes mellitus.

Vascularized adipose tissue grafts from human mesenchymal stem cells with bioactive cues and microchannel conduits.

Vascularization is critical to the survival of engineered tissues. This study combined biophysical and bioactive approaches to induce neovascularization in vivo. Further, we tested the effects of engineered vascularization on adipose tissue grafts. Hydrogel cylinders were fabricated from poly(ethylene glycol) diacrylate (PEG) in four configurations: PEG alone, PEG with basic fibroblast growth factor (bFGF), microchanneled PEG, or both bFGF-adsorbed and microchanneled PEG. In vivo implantation revealed no neovascularization in PEG, but substantial angiogenesis in bFGF-adsorbed and/or microchanneled PEG. The infiltrating host tissue consisted of erythrocyte-filled blood vessels lined by endothelial cells, and immunolocalized to vascular endothelial growth factor (VEGF). Human mesenchymal stem cells were differentiated into adipogenic cells, and encapsulated in PEG with both microchanneled and adsorbed bFGF. Upon in vivo implantation subcutaneously in immunodeficient mice, oil red O positive adipose tissue was present and interspersed with interstitial fibrous (IF) capsules. VEGF was immunolocalized in the IF capsules surrounding the engineered adipose tissue. These findings suggest that bioactive cues and/or microchannels promote the genesis of vascularized tissue phenotypes such as the tested adipose tissue grafts. Especially, engineered microchannels may provide a generic approach for modifying existing biomaterials by providing conduits for vascularization and/or diffusion.

Histología y morfometría de piel del pez Eremophilus mutisii (Trychomecteridae, Siluriformes)

The tropical freshwater fish Eremophylus mutisii is endemic to the Cundinamarca highland in Colombia. Skin samples (0.5x0.5 cm2) were taken from 11 specimens at six body parts (mandible, dorsal head, dorsal trunk, caudal trunk, medial trunk and abdominal area), fixed in 4% formaldehyde, dehydrated in 95% ethanol and 99% isopropanol, embedded in paraffin and sectioned at 5 sm. The skin is made of two mayor cutaneous layers (epidermis and dermis) and a subcutaneous layer (hypodermis). The epidermis presents three layers with secretory cells, epithelial cells and a few taste buds; the dermis is separated from the epidermis by a basal membrane. We observed fibroblasts, two layers of melanophors and some blood vessels; the hypodermis has vascularized adipose tissue. Skin thickness changes with body area; the dermis is thicker than the epidermis; skin has more club cells than mucous cells. The medial trunk area has the largest number of club and mucous cells. The skin of E. mutissi seems to mainly have a protective function.

Long Term Follow-up of Vascularized Dermal Fat Transfer

Backgrounds: Fibrous dysplasia is an uncommon, benign disorder characterized by a tumor-like proliferation of fibro-osseous tissue. It can present as an autosomal dominant disorder affecting the mandible and maxilla bones in children in their teenage years. The patient manifests with unilateral firm swelling of cheek. It can be managed by excision and resulting contour defect that can be managed by reconstructing using vascularized dermal fat. Resorption is the main problem due to an insuf!cient blood supply, and vascularized dermal fat have been described to minimize this problem.Patients and Methods: In this study we report the results after insertion of vascularized dermal fat into zygomatic-maxilla region. The method consists of implantation of vascularized dermis with attached subcutaneous fat from the antero-lateral thigh (ALT) into the right zygomatic-maxilla region, anastomosing the vascular with temporal superficial vessel. During a one-year follow up, the patient showed good results. Graft atrophy was observed. Despite the more extensive surgery and some minor complications the safety of this method with good functional and cosmetic results makes vascularized dermal fat an excellent alternative to reconstruct facial contour defect.Results: Compared with free-fat grafts, resorption rates for vascularized adipose tissue transfers are very low. Satisfactory cosmetic results were also achieved.Summary: The advantages of this method is the minimized resorption and an excellent functional and cosmetic result. Therefor, we imply that vascularized dermal fat is an excellent method to reconstruct facial contour defect.