Varus Deformity Research Articles

ДИФФЕРЕНЦИАЛЬНАЯ ДИАГНОСТИКА БОЛЕЗНИ БЛАУНТА: КЛИНИЧЕСКОЕ НАБЛЮДЕНИЕ

Lower extremities deformation is observed quite often in infants. One of the Blount's disease diagnosis features is the difficulty of its differential diagnosis of when excluded from other conditions such as rickets, rickets-like diseases and physiological curvature of the lower extremities in infants. Article represents the main diagnostic criteria for the abovementioned diseases. A clinical case of a patient with Blount's disease who had deviations in calcium-phosphorus metabolism that in their turn are uncommon for this pathology is described. The entire set of clinical and laboratory signs analysis was carried out in details, which then made it possible to carry out a differential diagnosis and exclude hereditary forms of rickets, primarily hypophosphatemic rickets as the reason for pronounced varus deformity of the legs in a 2.5 y/o pediatric patient. The tactics for further treatment by a specialized practitioner had been determined as well.

Design and application of a novel 3D printing digital navigation template for cubitus varus deformity in children.

This study was aimed to assess the feasibility and efficacy of 3D printing digital template for treatment of cubitus varus deformity. 32 patients who underwent lateral closing osteotomy were evaluated between January 2018 and January 2020 in this retrospective study. Navigation templates were used in 17 cases, while conventional surgery in 15 cases. The carrying angles before and after surgery, operation time and elbow joint function were compared. Navigation templates matched well with the anatomical markers of the lateral humerus. More accurate osteotomy degrees, shorter operation time and less radiation exposure were achieved in the navigation template group (p < 0.05). At the last follow-up time, significant difference was found based on the Bellemore criteria (p = 0.0288). The novel navigation template can shorten operation time, improve the lateral closing osteotomy accuracy and improve postoperative elbow joint function.

Osteotomy combined with anterior cruciate ligament reconstruction for anterior cruciate ligament injury and biplanar deformity.

It has been confirmed that the increased posterior tibial slope over 12 degrees is a risk factor for anterior cruciate ligament injury, and varus deformity can aggravate the progression of medial osteoarthritis. To evaluate the efficacy of modified high tibial osteotomy (HTO) and anterior cruciate ligament reconstruction (ACLR) in the treatment of anterior cruciate ligament (ACL) injuries with varus deformities and increased posterior tibial slope (PTS) based on clinical and imaging data. The patient data in this retrospective study were collected from 2019 to 2021. A total of 6 patients were diagnosed with ACL injury combined with varus deformities and increased PTS. All patients underwent modified open wedge HTO and ACLR. The degree of correction of varus deformity and the PTS was evaluated by radiography and magnetic resonance imaging. All 6 patients (6 knee joints) were followed up for an average of 20.8 ± 3.7 months. The average age at surgery was 29.5 ± 3.8 years. At the last follow-up, all patients resumed competitive sports. The International Knee Documentation Committee score increased from 50.3 ± 3.1 to 87.0 ± 2.8, the Lysholm score increased from 43.8 ± 4.9 to 86 ± 3.1, and the Tegner activity level increased from 2.2 ± 0.7 to 7.0 ± 0.6. The average movement distance of the tibia anterior translation was 4.8 ± 1.1 mm, medial proximal tibial angle (MPTA) was 88.9 ± 1.3° at the last follow-up, and the PTS was 8.4 ± 1.4°, both of which were significantly higher than those before surgery (P < 0.05). Modified open wedge HTO combined with ACLR can effectively treat patients with ACL ruptures with an associated increased PTS and varus deformity. The short-term effect is significant, but the long-term effect requires further follow-up.

Effect of Preoperative Coronal Plane Alignment on Actual Versus Predicted Alignment Using Patient Specific Instrumentation in Total Ankle Replacement

Alignment in total ankle replacement is important for success and implant survival. Recently there has been the introduction and adoption of patient specific instrumentation for implantation in total ankle replacement. Current literature does not evaluate the effect of preoperative deformity on accuracy of patient specific instrumentation. A retrospective radiographic analysis was performed on 97 consecutive patients receiving total ankle replacement with patient specific instrumentation to assess the accuracy and reproducibility of the instrumentation. Subgroup analysis evaluated the effect of preoperative deformity. All surgeries were performed by fellowship trained foot and ankle surgeons without industry ties to the implants used. Preoperative and postoperative films were compared to plans based on computerized tomography scans to assess how closely the plan would be implemented in patients. Overall postoperative coronal plane alignment was within 2° of predicted in 87.6% (85 patients). Similarly, overall postoperative sagittal plane alignment was within 2° of predicted in 88.7% (86 patients). Tibial implant size was accurately predicted in 81.4% (79 patients), and talus implant size was correct in 75.3% (73 patients). Patients with preoperative varus deformity had a higher difference between predicted and actual postoperative alignment compared to valgus deformity (1.1° compared to 0.3°, p=0.02). A higher average procedure time was found in varus patients, and more adjunctive procedures were needed in patients with varus or valgus deformity, but these were not significant, p>0.5. Surgeons can expect a high degree of accuracy when using patient specific instrumentation overall, but less accurate in varus deformity.

Postero-Central Slice Osteotomy of the Proximal Tibia: A Novel Technique for Correcting Resistant Tight Extension Gaps in Posterior-Stabilized Total Knee Arthroplasty for Varus Osteoarthritis

BackgroundThe aim of total knee arthroplasty (TKA) is to circumvent the pain due to advanced osteoarthritis of the knee joint and correct the limb alignment and biomechanics to improve patients’ quality of life. Apart from medio-lateral balancing, balancing flexion and extension gaps is a prerogative to achieve good results. This study proposes a novel surgical technique of postero-central slice osteotomy of the proximal tibia (PCSO-PT) for correcting tight extension gaps in posterior-stabilized knees and assesses its clinical and functional outcomes. MethodsA prospective study was conducted on 84 consecutive knees with tricompartmental osteoarthritis and varus deformity, requiring PCSO-PT during posterior-stabilized TKA between January 2016 and July 2018. Knee Society scores, flexion deformity, range of motion, antero-posterior instability, and complications were assessed at regular intervals for a minimum of 2 years postoperatively. ResultsResidual flexion deformities less than 11° after posterior capsular release were successfully corrected by the osteotomy. The mean preoperative flexion deformity of 18.1 ± 2.5° improved to 8.6 ± 2.2° intraoperatively after posterior capsular release from the femoral end and to 0.65 ± 0.76° intraoperatively immediately after the osteotomy, with no residual flexion deformity noted in any patient 6 weeks postoperatively. It had no negative effect on the significant post-TKA improvement of the mean Knee Society score from 32 ± 12 preoperatively to 94 ± 3 at the terminal follow-up. A direct correlation between preoperative flexion deformity and a resistant, tight extension gap (P = 0.003) was noted. There was no increase in coronal plane or sagittal plane instabilities in midflexion or on mobilization throughout the follow-up period, nor were any major adverse effects noted in this period. ConclusionsA PCSO-PT is an effective and safe alternative to overcoming tight extension during TKA after femoral-end capsular release, instead of capsular release from the tibial end or midcapsular region. Level of evidenceLevel IV, therapeutic study.

Comparison of radiological, clinical, and functional results of Jakob type 2 lateral condyle fractures treated with closed reduction and percutaneous pinning versus open reduction and K-wire fixation.

Pediatric humerus lateral condyle fractures (PHLCF) are one of the most common fractures among children. PHLCF is approximately 20% of all pediatric elbow fractures. Among the treatment modalities are: nonoperative treatment with splinting, closed reduction with percutaneous K-wire fixation (CRPP), and open reduction with K-wire fixation (ORIF). We aimed to evaluate radiological, functional, and clinical outcomes of Jakob type 2 PHLCF treated either with CRPP or ORIF. We hypothesized that CRPP may be as safe and effective as ORIF for Jakob type 2 PHLCF. In this retrospective study, we included patients with Jakob type 2 PHLCF operatively treated in a single center. Patients with multiple fractures or open fractures were excluded from the study. 69 patients between ages 2 and 12 were included and they were divided into two groups. Group 1 included the patients treated with CRPP, whereas Group 2 included the patients treated with ORIF. Demographical, radiological, clinical, and functional parameters were evaluated. Average duration of surgery ( P < 0.001), initial displacement ( P = 0.014), and duration of admission ( P < 0.001) were significantly less in group 1. Group 2 had significantly higher percentage of left-sided injury than group 1 ( P = 0.038). Average varus deformity score was significantly higher in group 1 ( P = 0.014). CRPP was associated with shorter duration of surgery and hospital stay. Functional, clinical, and radiological outcomes were identified similar between CRPP and ORIF for Jakob type 2 PHLCF. CRPP may be as safe and effective as ORIF for Jakob type 2 PHLCF.

Hindfoot Alignment in Flexible Cavovarus Deformity Under Orthostatic and Coleman Block Test Positions: A Weightbearing Computed Tomography Study.

Flexible cavovarus deformity is prevalent and the Coleman block test is frequently used to assess the first ray plantarflexion malpositioning in the overall deformity as well as the flexibility of the hindfoot. The objective was to assess and compare the weightbearing computed tomography (WBCT) 3-dimensional (3D) changes in clinical and bone alignment in flexible cavovarus deformity patients when performing the Coleman block test when compared to normal standing position and to controls. Twenty patients (40 feet) with flexible cavovarus deformity and 20 volunteer controls (40 feet) with normal foot alignment underwent WBCT imaging of the foot and ankle. Cavovarus patients were assessed in normal orthostatic and Coleman block test positions. Foot and ankle offset (FAO), hindfoot alignment angle (HAA), talocalcaneal angle (TCA), subtalar vertical angle (SVA) and talonavicular coverage angle (TNCA) and a CT-simulated soft tissue envelope image, WBCT clinical hindfoot alignment angle (WBCT-CHAA), were evaluated by 2 readers. Measurements were compared between cavovarus nonstressed and stressed positions and to controls. P values of .05 or less were considered significant. The intra- and interobserver intraclass correlation coefficient were good or excellent for all WBCT measurements. Cavovarus patients demonstrated significant correction of WBCT-CHAA (9.7 ± 0.4 degrees), FAO (2.6 ± 0.4%), and TNCA (8.8 ± 1.8 degrees) when performing the Coleman block test (all P values <.0001). However, WBCT-CHAA and FAO measurements were still residually deformed and significantly different from controls (P values of .001 and <.0001, respectively). TNCA values corrected to values similar to healthy controls (P = .29). No differences were observed in cavovarus patients during Coleman block test for the coronal measures: HAA, TCA, and SVA measurements. In this study, we observed improvement in the overall 3D WBCT alignment (FAO), axial plane adduction deformity (TNCA), as well as CT simulated clinical hindfoot alignment (WBCT-CHAA) in flexible cavovarus deformity patients when performing a Coleman block test. However, we did not find improvement in measures of coronal alignment of the hindfoot, indicating continued varus positioning of the hindfoot in these patients.

Biomechanical study of effect of tibial posteromedial defect depth and area on primary TKA implant stability

BackgroundMedial tibial defects are common in patients who underwent primary total knee arthroplasty for varus deformity. Previous clinical studies have categorized tibial defects according to the depth of the defects and recommended different ways of addressing them. This study aimed to perform a biomechanical FE analysis to investigate the role of depth and surface area of the medial tibial plateau defects in the stability of the tibial component in primary TKA implants. MethodForty posteromedial tibial defect models with eight different depths (including 2, 4, 6, 8, 11, 13, 16, and 18 mm) and five different surface areas (including 10, 20, 30, 40, and 50% medial surface involvement) were used to create the FE models. Loads were applied to ellipses on tibial tray with 70–30% mediolateral distribution. The resulting relative motion of the bone and implant was measured to evaluate the tibial tray instability. ResultsFor defects with less than 20% surface involvement, the amount of relative motion had a moderately increasing fashion; however, in more significant percentages of surface involvement of the medial tibial plateau, especially in 50%, the graphs revealed a nonlinear increasing pattern which means that the depth would affect the amount of relative motion only when defect area is large. ConclusionIn defects with less than 20% surface involvement approaches like graft and cement augmentation would suffice whereas it would be essential to consider a more appropriate method like stem or metal augments for defects with more than 20% of medial surface involvement as the instability increased nonlinearly.

Annual Trends of High Tibial Osteotomy: Analysis of an Official Registry in Italy.

Background and Objectives: Knee osteoarthritis is a serious burden for modern countries. Timing of surgery and treatment choice are still a matter of controversy in the orthopedic literature. The purpose of this study was to ascertain the incidence and hospitalization trends of high tibial osteotomy in Italy from 2001 to 2016. Materials and Methods: Data are sourced from the National Hospital Discharge Reports (SDO) of the Italian Ministry of Health between 2001 and 2016. Results: A total of 34,402 high tibial osteotomies were performed over the study period in Italy. The cumulative incidence was 3.6 cases per 100,000 residents. The age classes 50-54, 55-59 showed the higher number of procedures. In pediatric patients (0-19 years), high tibial osteotomies are also largely performed. The majority of patients having surgery were men with a M/F ratio of 1.5. The mean age of patients was 44.2 ± 19.2 years. Males were significantly younger than females (43.3 ± 20.7 vs. 45.6 ± 17.7). The average length of hospitalization was 6.1 ± 7.3 days. Over the course of the analysis, a declining trend in hospital stay length was seen. The main primary diagnosis codes were "Varus knee" (736.42 ICD-9-CM code, 33.9%), "Osteoarthrosis, localized, primary, leg region" (715.16 ICD-9-CM code, 9.5%). Conclusions: Over the study period, high tibial osteotomies in Italy almost halved. Varus deformity and knee osteoarthritis are the leading causes requiring high tibial osteotomy. Except for the pediatric setting, results showed that from the 20-24 age class to the 50-54 age class, there was an increasing request for knee osteotomy, whereas in those aged >60 years, the incidence progressively decreased. The evident decline in HTO performed over the years in Italy seems to reflect a minor role for knee osteotomy in the management of knee OA, as it seems to be primarily reserved for younger male patients.

Features of the formation of bone regenerate and metabolism of bone formation markers in a patient with type 1 diabetes mellitus and diabetic neuroosteoarthropathy (Charcot foot)

Background: Surgical treatment of diabetic neuroosteoarthropathy is a complex area in traumatology — orthopedics not only because of severe biomechanical disorders and gross deformations of the distal segment of the lower limb, but also because these phenomena are accompanied by many disorders of the somatic status. Of particular importance is a pronounced decrease in bone mineral density. This case is intended to illustrate the features of the treatment of this pathology. Clinical case description: A clinical case of treatment of a 34-year-old young female patient with type 1 diabetes mellitus, development of diabetic neuroosteoarthropathy (Charcot foot), and aseptic necrosis of the talus of the right foot is presented. From 2019–2020 conservative and surgical treatment was carried out aimed at stopping the active stage of Charcot foot, correcting deformity and stabilizing the distal segment of the limb (calcaneotibial arthrodesis). A satisfactory treatment result was achieved, complete activation 8 months after the operation. However, in 2021 The patient suffered a closed low-energy fracture of the distal metaphysis of the right tibia. Regarding this episode, the patient comes in at the stage of consolidation of a displaced fracture and complaints of recurrence of varus deformity, even greater shortening of the limb, and swelling of the ankle joint. The fact of injury is denied, which allows us to regard the existing fracture of the tibia as pathological. In this regard, an operation was performed: osteotomy of the fibula and tibia in the area of consolidation of the pathological fracture in order to correct the deformity and compensate for the existing shortening of the limb due to the formation of a distraction regenerate. During the treatment, malnutrition and delayed formation of bone regenerate were noted, which required prolonged use of an external fixation device and specific drug therapy aimed at stimulating osteogenesis and improving bone mineral density. At the end of the course, there was an increase in the mineral density of the tissue, the density of the regenerate radiologically and laboratory (control of bone formation markers) and a satisfactory functional result. CONCLUSION: A successful result in this clinical case was achieved by combining orthopedic surgical and conservative treatment with specific drug therapy in a comorbid patient with reduced bone mineral density and a high probability of complications in a multidisciplinary approach.

Complications of revision knee arthroplasty

Due to the growing scale of arthroplasty and the widening of indications for knee joint replacement, the durability of joint functioning has become a critical issue. Untimely diagnosis and inadequate treatment of patients with endoprosthesis component loosening leads to major bone defects. This problem arises from repeated joint interventions, large bone defects and duration of revision surgeries, that is fraught with catastrophic consequences for patients – revision prosthesis removal or even limb amputation. The project aims to improve the treatment for patients with instability of components after knee joint arthroplasty. The aim of the study is to analyze the results of revision knee arthroplasty and identify the causes of mistakes and complications of revision arthroplasty with the intention of prevention. Materials and methods. A retrospective analysis of 50 revision knee arthroplasties performed at the Centre for Arthroplasty of the State Institution “Institute of Traumatology and Orthopedics of the National Academy of Medical Sciences of Ukraine” was conducted. Clinical and radiological findings were evaluated for all patients. All revision prostheses used in this study were of the semi-constrained type. Cementation technique was used for all implants. In the revision of the septic complication group, a full cementation technique with antibiotics according to a sensitivity profile were used, while in the aseptic complication group, a surface cementation technique with antibiotics according to sensitivities were used. Results. The authors of the project have analyzed the results of treatment of 50 revision arthroplasty procedures performed between 2013 and 2022 for instability of the endoprosthesis components. The structure of complications has been examined and the causes of failure in revision knee arthroplasty have been identified. This study has shown promise in preventing complications and developing personalized approaches to revision arthroplasty. Conclusions. The analysis of revision knee arthroplasty failure has shown the prevalence of septic complications (56.0 %). In the case of septic complications after revision arthroplasty, Staphylococcus aureus prevailed (57.1 %), gram (-) microorganisms were causative agents in other cases. Factors resulting in aseptic complications included those associated with the surgical intervention (81.8 %), the patient (45.4 %) and the combination thereof (72.7 %). Significant causes of the femoral revision component loosening were residual valgus deformity, medial instability in the frontal plane; significant causes of the tibial component loosening were residual varus deformity and lateral instability in the frontal plane.

One-day surgery is safe and effective in unicompartmental knee arthroplasty: A prospective comparative study at 1 year of follow-up.

To compare the outcomes and complications of two perioperative protocols for the management of patients who underwent medial unicompartmental knee arthroplasty (UKA): 24 h (1-day surgery [OS]) versus 72 h (enhanced recovery after surgery [ERAS]) of the length of hospital stay (LOS). In our hypothesis, the reduction of the LOS from 3 to 1 day did not influence the outcomes and complications. A total of 42 patients (21 in each group) with isolated anteromedial knee osteoarthritis and meeting specific criteria were prospectively included in the study. Clinical outcomes included Knee Society Score (KSS) and Forgotten joint score while pain evaluation was performed using a Visual Analogue Scale (VAS). Functional outcomes were assessed measuring the knee range of motion (ROM) while radiographic outcomes were evaluated measuring the amelioration of the varus deformity through the hip-knee-ankle angle (HKA). Clinical and functional outcomes did not significantly differ between the two groups. Complications occurred in 9.5% of OS and 4.7% of ERAS group patients. Significant improvements in knee ROM, VAS pain, KSS and HKA angle were observed postsurgery, with no significant differences between groups except in KSS expectations and function trends. The OS protocol is safe and effective and LOS, in a well-defined fast-track protocol, did not significantly impact clinical and functional outcomes. OS may lead to reduced hospitalisation costs and potential reductions in complications associated with prolonged stays, benefiting both patients and healthcare facilities. However, further research with larger sample sizes and longer follow-up periods is needed to confirm these findings. Early mobilisation and rehabilitation protocols are key components of successful patient recovery following UKA procedures. Level II.

Case Report: Postsurgical hallux varus in which metatarsophalangeal joint arthrodesis was useful

A 74-year-old Japanese woman who underwent Mann’s procedure with fibular sesamoidectomy for left hallux valgus 21 years ago complained of left hallucis pain. She was diagnosed with iatrogenic hallux varus and hammer toe deformities. Metatarsophalangeal joint arthrodesis and shortening oblique osteotomy were performed. After surgery, the hallux valgus angle improved from -28° to 0°, and the intermetatarsal angle between the first and the second metatarsus improved from 0° to 6°. The Japanese Society for Surgery of the Foot RA foot and ankle scale improved from 73 to 81 points. She could walk without pain and sustained no deformity at 4 years after the surgery.

An Advanced Knee Simulator Model Can Reproducibly Be Used for Ligament Balancing Training during Total Knee Arthroplasty.

A critical and difficult aspect of total knee arthroplasty (TKA) is ligamentous balancing for which cadavers and models have played a large role in the education and training of new arthroplasty surgeons, although they both have several shortcomings including cost, scarcity, and dissimilarity to in vivo ligament properties. An advanced knee simulator (AKS) model based on computed tomography (CT) scans was developed in the setting of these challenges with cadavers and previous models. In this study, we compared the ligament balancing between AKS and human cadaveric knees to assess the validity of using the AKS for ligament balancing training during TKA. A CT scan of a TKA patient with varus deformity was used to design the AKS model with modular components, using three-dimensional printing. Three fellowship-trained arthroplasty surgeons used technology-assisted TKA procedure to plan and balance three cadaver knees and the AKS model. Medial and lateral laxity data were captured using manual varus and valgus stress assessments for cadavers and the model in an extension pose (10 degrees of flexion from terminal extension) and between 90 and 95 degrees for flexion. After preresection assessments, surgeons planned a balanced cruciate-retaining TKA. Following bony cuts and trialing, extension and flexion ligament laxity values were recorded in a similar manner. Descriptive statistics and Student's t-tests were performed to compare the cadavers and model with a p-value set at 0.05. Preresection medial/lateral laxity data for both extension and flexion were plotted and showed that the highest standard deviation (SD) for the cadavers was 0.67 mm, whereas the highest SD for the AKS was 1.25 mm. A similar plot for trialing demonstrated that the highest SD for the cadavers was 0.6 mm, whereas the highest SD for the AKS was 0.61 mm. The AKS trialing data were highly reproducible when compared with cadaveric data, demonstrating the value of the AKS model as a tool to teach ligament balancing for TKA and for future research endeavors.

Finite element analysis of mechanical stress in a cementless tapered-wedge short stem in the varus position

BackgroundIn recent years, the use of tapered-wedge short stems has increased due to their ability to preserve bones and tendons. Surgical techniques occasionally result in a varus position of the stem, which is particularly pronounced in short stems. Although the varus position is not clinically problematic, there are reports of an increased incidence of stress shielding and cortical hypertrophy. Thus, we evaluated and examined the acceptable range of varus angles using finite element analysis.MethodsPatients diagnosed with osteoarthritis of the hip joint who had undergone arthroplasty were selected and classified into three types [champagne-flute (type A), intermediate (type B), and stovepipe (type C)]. Finite element analysis was performed using Mechanical Finder. The model was created using a Taperloc microplasty stem with the varus angle increased by 1° from 0° to 5° from the bone axis and classified into seven zones based on Gruen’s zone classification under loading conditions in a one-leg standing position. The volume of interest was set, the mean equivalent stress for each zone was calculated.ResultsA significant decrease in stress was observed in zone 2, and increased stress was observed in zones 3 and 4, suggesting the emergence of a distal periosteal reaction, similar to the results of previous studies. In zone 2, there was a significant decrease in stress in all groups at a varus angle ≥ 3°. In zone 3, stress increased from ≥ 3° in type B and ≥ 4° in type C. In zone 4, there was a significant increase in stress at varus angles of ≥ 2° in types A and B and at ≥ 3° in type C.ConclusionIn zone 2, the varus angle at which stress shielding above Engh classification grade 3 may appear is expected to be ≥ 3°. Distal cortical hypertrophy may appear in zones 3 and 4; the narrower the medullary cavity shape, the smaller the allowable angle of internal recession, and the wider the medullary cavity shape, the wider the allowable range. Long-term follow-up is required in patients with varus angles > 3°.

Correlation between Component Size and Functional Knee Score in Patients Undergoing Bilateral Simultaneous Total Knee Arthroplasty: A Cross-Sectional Study

Abstract Background: Simultaneous bilateral total knee arthroplasty (simBTKA) has been a favored surgical solution to reduce costs and patient suffering. We aimed to evaluate the rate of asymmetry of component size in patients undergoing simBTKA and its impact on knee function as we believe that implant asymmetry may affect the functional outcomes in those patients. Methods: A cross-sectional study design was done on on 60 patients (120 knees) with simBTKA using patient-specific templating (PST). Patients were included if they had Kellgren–Lawrence Grade III-IV osteoarthritis. Revision surgeries, staged BTKA, or patients with bone defects, valgus deformity, severe varus deformity (defined as above 20°), and extra-articular deformities were excluded from the study. The outcome measures were interlimb component asymmetry, Knee Society Score (KSS), and range of motion (ROM). The comparison between pre- and postoperative findings was done using a dependent t-test. Results: A total of 29 (48.34%) patients had symmetrical femoral and tibial components, whereas the rest had asymmetry, of them, 11.7% had both femoral and tibial component size asymmetry. There were no statistically significant differences between the changes in KSS and ROM in the smaller implant and larger implant groups (P = 0.5 and P = 0.4, respectively). The total number of complications was eight and as follows: superficial infection, aseptic loosening, rupture of the patellar tendon after a bathroom fall, anemia requiring blood transfusion, residual varus deformity, deep venous thrombosis, periprosthetic fracture, and malalignment. Conclusion: There is no correlation between the interlimb component asymmetry and the knee function. However, there was statistically significant improvement from preoperative to postoperative KSS and ROM in small and large implants.

Osteotomies for genu varum: Should we always correct at the tibia? A multicenter analysis of practices in France

IntroductionTibial correction is often performed during a valgus-producing osteotomy for genu varum. However, overcorrection and the creation of a joint line obliquity (JLO) have been associated with unfavorable functional outcomes after high tibial osteotomy (HTO). The aims of this study were to analyze: 1) the corrections obtained after HTO; 2) the rationale behind the indication per the European Society for Sports Traumatology Surgery and Arthroscopy (ESSKA) recommendations; and 3) the correlation between the postoperative corrections obtained and functional outcomes. HypothesisA significant number of patients who underwent an isolated HTO did not present an “ideal” theoretical indication based on the preoperative angles and correction targets to be performed. Materials and methodsThis multicenter study included 289 isolated HTOs. Demographic and morphometric data were anonymized and compiled in a database. Preoperative radiographic parameters were compared with the ESSKA consensus recommendations on osteotomies for genu varum. The consensus defined the “ideal” indication for performing an HTO as medial tibiofemoral compartment pain with significant tibial varus deformity (medial proximal tibial angle [MPTA]<85°), no significant femoral varus deformity (lateral distal femoral angle [LDFA]<90°), an expected postoperative obliquity of less than 5°, and a correction resulting in moderate tibial valgus (postoperative MPTA<94°). The incidence of patients with an “ideal” theoretical indication for isolated HTO and those with a theoretical indication not perfectly justified by the radiographic data and preoperative planning were recorded. ResultsUnder the ESSKA consensus criteria, 25.3% (n=73) of isolated HTOs, 15.6% (n=45) of isolated femoral osteotomies, 9.3% (n=27) of double-level osteotomies, and 49.9% (n=144) of cases where no osteotomy was performed due to the lack of significant extra-articular tibial and/or femoral deformity were deemed justified. The presence of a preoperative femoral deformity and the absence of an “ideal” indication for HTO did not affect the postoperative Tegner Activity Scale or the Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) scores (p>0.05). A high preoperative hip-knee-ankle (HKA) angle and MPTA, which indicated less varus, were associated with a greater risk of there being no “ideal” theoretical indication for an HTO (coefficient of determination [R2]=0.19 and R2=1, respectively; p<0.001). ConclusionThis study showed that isolated HTOs in current practice were not justified in a significant number of patients, even though they could lead to tibial overcorrection and excessive JLO. This did not impact the functional results of this series, but it might complicate the performance of a secondary knee arthroplasty. Nevertheless, some young patients in this series underwent a salvage osteotomy outside the “ideal” indications of the European recommendations. Level of evidenceIV; case series.

Component rotational mismatch in the standing position is a potential risk factor for unfavourable functional outcomes after total knee arthroplasty.

This study assessed rotational mismatch between components after total knee arthroplasty (TKA) in the supine and standing positions and aimed to investigate the effect of rotational mismatch in the standing position on postoperative patient-reported outcome measures (PROMs). Seventy-one patients (71 knees) who underwent TKA for medial knee osteoarthritis were used to investigate rotational mismatches between components. Rotational mismatches between components were examined on postoperative standing whole-leg and supine knee radiographs using a three-dimensional-to-two-dimensional model image registration technique, and the angles between the reference axes of the components were measured. Component alignment was evaluated using postoperative computed tomography images, and a questionnaire (2011 version of the Knee Society Score: [KSS 2011]) was mailed to investigate postoperative PROMs. In the entire cohort, rotational mismatches in the supine and standing positions were similar (p = 0.9315). In 15% of patients, the mismatch was large (>5°) in the supine position but small (<5°) in the standing position (overestimated group). However, in 23% of patients, the mismatch was small (<5°) in the supine position and large (>5°) in the standing position (underestimated group). The underestimated group had severe preoperative varus deformity, resulting in external rotation of both femoral and tibial components. Rotational mismatch in the standing position (p = 0.0032) was a significant risk factor for unfavourable PROMs. Patients with a mismatch in the standing position had significantly lower scores than those without a mismatch (p = 0.0215), exceeding the minimal clinically important difference values. The underestimated group is clinically important because the surgical procedure and intraoperative assessment of component placement are performed in the supine position. In cases of severe preoperative varus deformity, care should be taken not to place the component in malrotation to avoid rotational mismatch in the standing position. Ⅳ, Case series.

Lateral closing wedge supracondylar osteotomy fixed with angled tubular plate for cubitus varus deformity: A case report

Lateral closing wedge supracondylar osteotomy fixed with angled tubular plate for cubitus varus deformity: A case report

A Morphological Study of Distal Femoral Varus Deformity.

Background In the management of medial compartment knee osteoarthritis via around-knee osteotomy (AKO) and total knee arthroplasty (TKA), evaluating the lateral distal femoral angle (LDFA) is crucial. This angle reflects the presence of distal femoral varus deformity. This study aims to explore the relationship between LDFA and lower extremity bone morphology and identify factors contributing to a high LDFA. Methods A retrospective analysis was conducted on 59 patients who underwent AKO or TKA at our hospital. Alignment of the lower extremity was assessed using X-rays, and bone morphology was investigated through computed tomography (CT) employing the ZedKnee® system(LEXI, Tokyo, Japan). Each measured parameter was analyzed. Results Our findings indicate a significant correlation between LDFA and several parameters, including age, femoral tibial angle (FTA), hip knee ankle angle (HKA), percentage of mechanical axis (% MA), femoral bowing angle, femoral tibial joint torsion, and the height of lateral and medial femoral condyles. A multiple-regression analysis determined that the most significant influences on LDFA were the heights of the femoral condyle, age, and HKA. Conclusion LDFA is significantly affected by the heights of the medial and lateral femoral condyles and tends to increase with age, possibly as a result of attrition of the medial femoral condyle. Given its significance, LDFA should be carefully considered as a preoperative indicator in AKO and TKA to guide surgical caution when LDFA is elevated.