Correct Varus Research Articles

Clinical-radiological results of the tibial osteotomy of valgization by internal addition in Gonarthrosis.

In knee osteoarthritis, medial-opening tibial osteotomy remains a good surgical technique, and have been effective in stabilizing and even improving osteoarthritis, Our study is about 20 cases of gonarthrosis on genu varum, treated by opening wedge valgus high tibial osteotomyconducted within the orthopedic trauma department '' B'' of the University Hospital Mohamed VI of Marrakech, over a period of 4 years. The mean age of our patients was 49 years (39-60), with a sex ratio of 1M/4F. In 55% of cases (11 cases) thegonarthrosis was related to primitive genu varum, while 45% cases (9 cases) was secondary to trauma ormeniscectomy. Clinically the knee pain was the main symptom in all cases, with an intensity level 3 on the simple verbal scale. The imagery was designed to measure angular deviations and surgical correction and monitoring the evolution. Angular deviation adjusted mean was 10.3 ° (6 ° -16 °), stages II and III of Ahlback classification, represent the mostcases of tibiofemoral osteoarthritis (90%).The filling was done by autologous bone graft, and the average degree of varus correction was 9.6 °.The results evaluated by the IKS score were excellent or good in 60% of cases for the knee score and 73% for the function score.

Peroneus Brevis to Longus Tendon Transfer in the Treatment of Flexible Progressive Collapsing Foot Deformity: A Cadaveric Study.

Although operative treatment of the flexible progressive collapsing foot deformity (PCFD) remains controversial, correction of residual forefoot varus and stabilization of the medial column are important components of reconstruction. A peroneus brevis (PB) to peroneus longus (PL) tendon transfer has been proposed to address these deformities. The aim of our study was to determine the effect of an isolated PB-to-PL transfer on medial column kinematics and plantar pressures in a simulated PCFD (sPCFD) cadaveric model. The stance phase of level walking was simulated in 10 midtibia cadaveric specimens using a validated 6-degree of freedom robot. Bone motions and plantar pressure were collected in 3 conditions: intact, sPCFD, and after PB-to-PL transfer. The PB-to-PL transfer was performed by transecting the PB and advancing the proximal stump 1 cm into the PL. Outcome measures included the change in joint rotation of the talonavicular, first naviculocuneiform, and first tarsometatarsal joints between conditions. Plantar pressure outcome measures included the maximum force, peak pressure under the first metatarsal, and the lateral-to-medial forefoot average pressure ratio. Compared to the sPCFD condition, the PB-to-PL transfer resulted in significant increases in talonavicular plantarflexion and adduction of 68% and 72%, respectively, during simulated late stance phase. Talonavicular eversion also decreased in simulated late stance by 53%. Relative to the sPCFD condition, the PB-to-PL transfer also resulted in a 17% increase (P = .045) in maximum force and a 45-kPa increase (P = .038) in peak pressure under the first metatarsal, along with a medial shift in forefoot pressure. The results from this cadaver-based simulation suggest that the addition of a PB-to-PL transfer as part of the surgical management of the flexible PCFD may aid in correction of deformity and increase the plantarflexion force under the first metatarsal. This study provides biomechanical evidence to support the addition of a PB-to-PL tendon transfer in the surgical treatment of flexible PCFD.

Osteotomy Correction Angle Cut-off Points Can Guide the Operation to Prevent a Significant Decrease in Patella Height.

Patients who undergo a biplanar ascending medial open-wedge high tibial osteotomy with an excessive correction angle might experience patella infera and even knee pain after surgery. The purpose of this study was to identify the cut-off points for the degree of knee varus correction of open-wedge high tibial osteotomy, which is related to the symptomatic patellar position change. This retrospective study included 124 patients (mean age 61.69 ± 6.28 years; 78 women, 46 men) with varying degrees of varus knee osteoarthritis. All patients had undergone standard biplanar medial open-wedge high tibial osteotomy. They were divided into nine groups according to the change in hip-knee-ankle angle. Plain radiographs and three-dimensional CT images were obtained preoperatively and 18 months postoperatively. Patellar height was assessed using the Caton-Deschamps index, the Insall-Salvati index, and the Blackburne-Peel index. The patellofemoral index and patellar tilt were used to evaluate the degree of horizontal displacement of the patella. The varus correction, medial-proximal tibial angles, joint line convergence angles, and hip-knee-ankle angles were also measured. The subjective score was evaluated using the Western Ontario and McMaster Universities osteoarthritis index (WOMAC). There were significant changes in patella indexes in each group after surgery, among which there was no significant difference in patellar height changes for Groups A to F (p > 0.05), which were significantly lower than those in Group G, H, and I (p < 0.001). The patellar tilt and patellofemoral index also followed the same trend. The improvement in WOMAC scores for Groups G, H, and I was also significantly less for Groups A to F (p < 0.001). The patellar height, patellar tilt, and patellofemoral index all changed significantly in parallel with increasing degrees of osteotomy correction. The cut-off points for correction angle are 12.5° to 13.4°. When the correction angle is larger than this range, the patellar position can be significantly affected. Postoperative patellofemoral joint pain may be related to the changes in patella position.

[Translated article] Closing wedge high tibial osteotomy: An old-fashioned technique? Survival, clinical and radiological outcomes of a case series analysis

IntroductionClosing wedge high tibial osteotomy (CW-HTO) is a surgical option for active patients with medial knee pain and mild–moderate osteoarthritis with varus limb deformity. Despite its good reported results, this technique has been losing popularity. The aim of this study was to analyse the survival rate, clinical functional outcomes and radiological results of CW-HTO. MethodsIt is a retrospective case series study. Seventy patients with primary knee osteoarthritis, operated on between 2010 and 2020 in a single Spanish tertiary hospital using the CW-HTO technique and with a minimum follow-up of 2 years were analysed. ResultsSurvival rate was 87.6% and 75.5% after a follow-up of 5 and 10 years respectively. Functional outcomes were good-to-excellent (KSS 77.7/100 and OKS 35.6/48) and good pain control (VAS 3.9/10) and high satisfaction (7.2/10) were achieved. Limb varus malalignment was significantly corrected (mean postoperative HKA angle 177.6° and MPTA 90.7°). However, 30% of patients presented hypocorrection, which was associated with inferior survival, functionality and satisfaction. ConclusionCW-HTO technique can be useful for patients with knee osteoarthritis and varus limb. It allows to correct varus malalignment while achieving good-to-excellent functional outcomes, good pain control, high patient satisfaction and acceptable medium-long term survival rate. However, it is associated with a non-negligible risk of hypocorrection or medial hinge disruption.

The unintentional effect of unicompartmental knee arthroplasty on extraarticular deformity and of high tibial osteotomy on intraarticular deformity for the treatment of anteromedial osteoarthritis.

Unicompartmental Knee Arthroplasty (UKA) and High Tibial Osteotomy (HTO) are two valid options in the treatment of Anteromedial Osteoarthritis (AMOA) of the knee with UKA being mainly performed in cases of Intraarticular deformity (IA) and HTO in cases of Extraarticular deformity (EA). The exact unintentional effect of UKA on EA deformity and HTO on IA deformity is still not well understood. The aim of this study was to assess this unintentional effect of UKA on EA and HTO on IA deformities respectively. This a single-center retrospective study in which 50 patients who underwent UKA and 50 patients who underwent medial opening wedge HTO (MWOHTO) for the treatment of AMOA were included. Overall, 35 males and 15 females underwent HTO with a mean age of 44.3 ± 11.2 years while the mean age of the UKA group was 71.8 ± 7.9 years in 23 males and 27 females. The radiological effect of UKA and HTO on each of the following angles: Hip-Knee-Ankle angle (HKA), Medial Proximal Tibial Angle (MPTA), mechanical Lateral Distal Femoral Angle (mLDFA) and Joint Line Convergence Angle (JLCA) on long film radiographs both pre- and postoperatively was measured. The postoperative values were compared to the preoperative values to detect the expected and unintended effects of each technique on IA and EA deformities. In the HTO group, the MPTA has changed significantly as expected from 83.1 ± 4.5 preoperatively to 88.9 ± 3.9 postoperatively (p value < 0.001) correcting the existing preoperative EA varus without overcorrection. Similarly in the UKA group, the JLCA has also changed significantly as expected to correct the IA varus from 3.8 ± 1.7 preoperatively to 0.9 ± 1 postoperatively (p value < 0.001). On the other hand, the JLCA was unintentionally changed in the HTO group from 2.6 ± 2.1 preoperatively to 1.6 ± 2.4 postoperatively (p value = 0.03) partly correcting the IA varus deformity. Similarly, the MPTA showed a significant change that occurred inadvertently in the UKA group from 84.8 ± 2.1 to 86.3 ± 1.6 postoperatively (p value < 0.001). This unintentional increase in the MPTA also partly corrected the preexisting EA varus deformity. The mLDFA did not show a significant change neither in the HTO group (p value = 0.96) nor in the UKA group (p value = 0.94). In addition to intraarticular varus correction, UKA can partly correct the extraarticular varus deformity in AMOA even when resurfacing is exclusively attempted. Additionally, intraarticular deformity can be also partially managed by HTO along with the extraarticular varus correction even without performing overcorrection.

Tibial tuberosity-trochlear groove distance is significantly decreased by medial closing wedge distal femoral osteotomy.

While medial closing wedge distal femoral osteotomy (MCWDFO) has been used to address patella instability combined with valgus malalignment, its impact on patellofemoral parameters remains uncharted. Hence, this study seeks to establish a three-dimensional (3D) planning of MCWDFO and measure its effect on the tibial tubercle - trochlear groove distance (TTTG) through simulation and calculation. MCWDFO with a stepwise increment of one-degree varisation (1°-15°) was performed on 3D surface models of 14 lower extremities with valgus malalignment and 24 lower extremities with neutral alignment of the lower limb, resulting in a total of 608 simulations. Anatomic landmarks were employed to measure hip-knee-ankle angle (HKA), TTTG, and femoral torsion for each simulation. A mathematical formula was adopted to calculate TTTG changes following MCWDFO, and subsequently the mean simulated and calculated TTTG values were compared. Following a standardised protocol, MCWDFO was performed without rotational changes. MCWDFO exhibited an almost linear reduction in TTTG, at a rate of approximately -1.05 ± 0.13 mm per 1° of varisation, demonstrating a strong negative correlation (R = -0.83; p < 0.001). Limb alignment did not exert an influence on TTTG change; however, it correlated with tibial plateau width. The mean difference between the simulated and calculated TTTG values amounted to 0.03 ± 0.03 mm per 1° varisation (p < 0.001). The TTTG distance is linearly reduced by 1.05 mm for every 1° of varisation within the varus correction range of 0°-15° during MCWDFO. Patients with combined valgus and patellar instability may benefit from MCWDFO due to frequently pathological TTTG. Level III, descriptive laboratory study.

Increased medial talar tilt may incite ankle pain and predispose ankle osteoarthritis after correction of severity of knee varus deformity among patients undergoing bilateral total knee arthroplasty: a prospective observation

PurposePatients with varus knee osteoarthritis usually compensate at the ankle and typically walk with hindfoot valgus alignment. As the neutral weight-bearing axis of the lower limbs is restored with Total Knee Arthroplasty (TKA), ankle and hindfoot biomechanics also acutely change. This study aims to investigate whether any ankle clinical-radiographical changes occur as a result of bilateral mechanical TKA in patients with bilateral Osteoarthritis knee at a minimum follow-up of 6 months.MethodsThe prospective observational study included 61 patients (122 knees) undergoing simultaneous bilateral TKA (mechanical alignment). Tibio-talar angle(TTA), tibial Anterior Surface angle (TAS), lateral distal tibial angle (LDTA), talar-tilt angle (TT), anatomical talocrural angle (aTC), ground surface and distal tibial plafond angle (GP), ground surface and an upper surface of talus angle (GT)and tibial plateau and tibial plafond angle (PP) were measured on long-film radiographs to look for changes in the ankle, whereas functional assessment was done using American Foot and Ankle Society (AOFAS), Foot and Ankle Disability Index (FADI), and Forgotten Joint (FJS-12) scores. Patients were sub-grouped based on the Hip-Knee-Ankle (HKA) axis, and the effect of the severity of knee varus on the ankles after TKA was also analyzed. The minimum follow-up was 6 months.ResultsA significant decrease in the tibial plateau-tibial plafond (PP), ground-tibial plafond (GP), and ground-talar dome (GT) angles was noted after TKA (p-value < 0.05). Postoperative functional parameters were comparable to the preoperative status except for FADI, which significantly improved (p-value-0.03). Sub-group analysis based on the severity of knee varus (HKA) revealed GT to be most significantly reduced (p-value-0.036), while the talar tilt (TT) increased (p-value-0.044). Functional outcomes of the ankles clinically improved with the correction of severe knee varus after TKA. At a mean follow-up of 13.2 months post-TKA, 7 out of 61 (11.4%) patients complained of post-TKA ipsilateral ankle pain.ConclusionMechanically aligned bilateral TKA in severe varus deformity of the knee significantly decreases the GT angle but increases the varus tilt of the talus with lateral talar incongruency and under-coverage. Although the acute correction of severe knee varus deformity aligns the tibia more neutrally, resulting in an overall clinically evident improvement in ankle functional outcome, the increased varus talar tilt remains a deep concern.Level of EvidenceProspective, observational, comparative study Level II.

Cotton Osteotomy: An Integral Midfoot Procedure for Forefoot Varus Correction

Forefoot varus is a component of the adult-acquired flatfoot deformity which had to be dealt with independently because isolated hindfoot procedures are insufficient to address this deformity. The dorsal opening wedge osteotomy of the medial cuneiform also known as the Cotton osteotomy is an effective and reliable procedure in the correction of forefoot varus with consistently reported good outcomes in terms of improved radiographic and functional outcomes with excellent bony union rate. Notably, it is also very versatile in that the degree of sagittal correction can be adjusted freely. The use of anatomic Cotton plates with titanium wedge integration makes the osteotomy even more robust with the prevention of early loss of correction and reduction of shear forces at the osteotomy site. Therefore, we describe our technique and experience using an anatomic Cotton plate with titanium wedge integration in Cotton osteotomy for forefoot varus. Level of Evidence: Level V.

Modified French Osteotomy for Cubitus Varus Correction – Our Experience

Modified French Osteotomy for Cubitus Varus Correction – Our Experience

Osteotomía de sustracción lateral tibial: ¿una técnica pasada de moda? Análisis de supervivencia, resultados clínicos y radiológicos de una serie de casos

IntroductionClosing wedge high tibial osteotomy (CW-HTO) is a surgical option for active patients with medial knee pain and mild-moderate osteoarthritis with varus limb deformity. Despite its good reported results, this technique has been losing popularity. The aim of this study was to analyse the survival rate, clinical functional outcomes and radiological results of CW-HTO. MethodsIt is a retrospective case series study. Seventy patients with primary knee osteoarthritis, operated on between 2010 and 2020 in a single Spanish tertiary hospital using the CW-HTO technique and with a minimum follow-up of 2 years were analysed. ResultsSurvival rate was 87,6% and 75,5% after a follow-up of 5 and 10 years respectively. Functional outcomes were good-to-excellent (KSS 77.7/100 and OKS 35.6/48) and good pain control (VAS 3.9/10) and high satisfaction (7.2/10) were achieved. Limb varus malalignment was significantly corrected (mean postoperative HKA angle 177,6° and MPTA 90,7°). However, 30% of patients presented hypocorrection, which was associated with inferior survival, functionality and satisfaction. ConclusionCW-HTO technique can be useful for patients with knee osteoarthritis and varus limb. It allows to correct varus malalignment while achieving good-to-excellent functional outcomes, good pain control, high patient satisfaction and acceptable medium-long term survival rate. However, it is associated with a non-negligible risk of hypocorrection or medial hinge disruption.

Modified French Osteotomy for Cubitus Varus Correction: Our Experience

Background: Various fixation techniques have been described for osteotomy for correction of cubitus varus. Kirschner-wiring (K-wiring) was used in the past for fixation; however, rates of fixation failure and pin-track infection were high. Fixation with two screws and a figure-of-eight wiring provides a stable fixation in children younger than 15 years. Herein, we used a modified lateral approach and a figure-of-eight construct with two screws and evaluated the outcome.&#x0D; Methods: A case series comprising 35 patients out of the total of 54 patients who underwent modified French osteotomy between January 2013 to December 2021 was conducted retrospectively. Functional outcomes were assessed using the modified Mayo Elbow Performance Scoring (MEPS) system.&#x0D; Results: There were 22 male and 13 female subjects in the study group. We had excellent results in 16 cases, good outcomes in 13 cases, and fair outcomes in 6 cases. Superficial infection was seen in three patients and four patients had occasional negligible pain. In addition, there was no loss of correction or fixation failures in our study.&#x0D; Conclusion: Modified French osteotomy using two screws and figure-of-eight wiring is a simple and safe procedure that yields satisfactory outcomes. A careful preoperative planning, sufficient surgical technique, and stable fixation are key to achieving satisfactory functional outcomes.

Percutaneous transphyseal screw induces varus proximal femoral growth modulation in a growing pig model-A three-dimensional analysis.

Bone and joint angular deformities are common pediatric orthopedic problems that are often corrected surgically. Previous studies successfully demonstrated proximal femoral growth modulation in animal models, however outcome measurements were limited by two-dimensional analysis. In this study, six Yorkshire cross male piglets were treated with unilateral percutaneous transphyseal screw placement across the medial aspect of the proximal femoral physis and analyzed using three-dimensional (3D) techniques. Three primary outcome measures were considered-physis angle, version, and femoral length. Compared to paired controls, all treated femurs displayed varus correction and shortening after an average treatment period of 10 weeks. The amount of varus change was 11.6 ± 2.8° (mean ± SD) (p = 0.0002, 95% confidence interval [CI] [8.659, 14.589]) and shortening was 4.3 ± 1.6 mm (p = 0.0011, 95% CI [2.672, 5.942]). Four animals demonstrated retroversion and two demonstrated anteversion compared to controls (4.1 ± 5.4° retroversion, p = 0.1169, 95% CI [-1.483, 9.765]). The amount of varus correction was strongly correlated with the orientation of the screw relative to the medial/lateral axis of the physis (r = -0.887, p = 0.0183, 95% CI [-0.988, -0.271]). The amount and direction of version was strongly correlated with how eccentrically anterior or posterior the screw was placed relative to the center of the physis (r = -0.850, p = 0.0322, 95% CI [-0.983, -0.123]) as well as the angle of the screw relative to the posterior condylar axis of the femur (r = -0.980, p = 0.0006, 95% CI [-0.998, -0.822]). This study is the first to use 3D analysis to quantify proximal femur growth modulation and identify associations between the growth modulation outcomes and screw placement parameters.

Peroneus Brevis to Longus Tendon Transfer in the Treatment of the Flexible Progressive Collapsing Foot Deformity: A Cadaveric Study

Category: Midfoot/Forefoot; Hindfoot Introduction/Purpose: Although operative treatment of the flexible progressive collapsing foot deformity (PCFD) remains controversial, correction of residual forefoot varus and stabilization of the medial column are important components of reconstruction. An opening wedge medial cuneiform osteotomy or first tarsometatarsal fusion is traditionally performed to plantarflex the first metatarsal. More recently, tendon transfers such as a peroneus brevis (PB) to peroneus longus (PL) have been proposed. However, there is little data to support their use. The aim of our study was to determine the effect of an isolated PB- to-PL transfer (PBT) on medial column and hindfoot joint kinematics in a simulated PCFD (sPCFD) cadaveric model using a robotic gait simulator. We hypothesized that a PBT in a sPCFD model would partially restore kinematics to the intact state. Methods: A validated six-degree of freedom robot (Baxter et al., 2016) was used to simulate the stance phase of level walking for 6 mid-tibia cadaveric specimens (3 male; age: 72 ± 8 years). An eight-camera motion capture system was used to track reflective markers fixed to bones of the foot and ankle. Three conditions were tested for each specimen: intact, sPCFD (Henry et al., 2022), and after PBT. The PBT was performed by transecting the PB and advancing the proximal stump 1 cm into the PL (Sanhudo, 2019). Outcome measures included kinematics of the talonavicular, subtalar, and first tarsometatarsal joints. Maximum differences between the PBT and sPCFD conditions and 95% confidence intervals (95%CIs) were calculated. The percent deformity correction was determined by dividing the difference between the PB and sPCFD states by the difference between the intact and sPCFD states at the site of maximum deformity correction. Results: Relative to the sPCFD condition, the PBT resulted in a maximum increase in talonavicular plantarflexion of 1.8° (95%CI 0.9°-2.7°) with 159% correction during midstance, decrease in talonavicular abduction of 1.5° (95%CI 0.3°-2.8°) with 65% correction during midstance, and decrease in talonavicular eversion of 2.4° (95%CI 1.2°-3.8°) with 90% correction during mid-to- late stance. All deformities had consistent correction at the talonavicular joint during stance (Figure 1). Additionally, the PBT resulted in a maximum increase in subtalar plantarflexion by 0.8° (95%CI 0.3°-1.8°) with 155% correction in early stance, decrease in subtalar abduction by 0.8° (95%CI 0.5°-1.2°) with 191% correction during early stance, and decrease in subtalar eversion by 1.5° (95%CI 0.5°-2.2°) with 178% correction during mid-stance. There was no effect on first tarsometatarsal joint kinematics. Conclusion: A PB-to-PL transfer in a sPCFD model resulted in the correction of multiple deformities including increased plantarflexion and decreased abduction at the talonavicular joint compared to the sPCFD without the transfer, most notably during PB activation in stance. The PBT also decreased eversion at the talonavicular and subtalar joints. Our results suggest that the addition of a PBT as part of the surgical management of the flexible PCFD contributes to correction of the residual forefoot varus, midfoot abduction, and hindfoot valgus deformities by plantarflexing through the medial column and removing a deforming force on the foot by the PB.

Patient Reported and Radiographic Outcomes following the Malerba Osteotomy

Category: Hindfoot; Other Introduction/Purpose: The Malerba calcaneal osteotomy is a step cut Z-type osteotomy with a lateral wedge resection used to treat hindfoot varus deformity. The osteotomy allows for lateral translation while the wedge resection enables lateral rotation of the calcaneal tuberosity. The technique enables a more powerful correction of hindfoot varus without excessive lateral translation of the calcaneus, which has been shown to cause tarsal tunnel syndrome. Thus far, there have been few published clinical and radiographic outcomes on the Malerba osteotomy. The purpose of this article is to report on patient reported outcome scores (PROMIS), complications, and radiographic improvement in a series of patients treated with this osteotomy. Methods: A prospectively collected foot and ankle registry was queried to retrospectively identify patients who underwent a Malerba osteotomy from February 2016 through January 2022. Patients were included if they were over 18 years of age, underwent a Malerba osteotomy, had preoperative and minimum 1-year postoperative PROMIS scores, and preoperative and postoperative radiographs. 40 patients met the inclusion criteria (average age 54.3 years). PROMIS scores from 6 domains including physical function, pain interference, pain intensity, global physical health, global mental health, and depression were compared preoperatively and postoperatively. Radiographic measures including talonavicular coverage angle (TNCA), calcaneal pitch (CP), and lateral talus-1st metatarsal angle (Meary’s angle) were measured and compared preoperatively and postoperatively. Complications and radiographic union were also recorded. Results: At a mean of 22 months, PROMIS domains including physical function, pain interference, pain intensity, global physical health, and global mental health improved significantly; the depression scale did not significantly change (Table 1). Calcaneal pitch and Meary’s angle significantly improved from 22.9 to 19.1 (p &lt;.001) and 8.2 to 5 (p &lt;.001), respectively. The talonavicular coverage angle did not significantly improve (p=.2). There were no delayed unions or nonunions. There was 1 case of sural neuritis but no instances of postoperative tarsal tunnel syndrome. There were 3 (8%) superficial infections treated nonoperatively and 0 deep infections. 4 patients (10%) required reoperation: 2 for removal of hardware and 2 for conversion to subtalar fusion. Conclusion: The Malerba calcaneal Z-osteotomy is an effective and safe method to treat adult hindfoot varus deformity. In our series, patients demonstrated an improvement in PROMIS and radiographic outcomes with minimal complications. In particular, the rate of neurologic complications was very low with only one case of sural neuritis and no cases of iatrogenic tarsal tunnel syndrome.

Republication of "Proximal Rotational Metatarsal Osteotomy for Hallux Valgus (PROMO): Short-term Prospective Case Series With a Novel Technique and Topic Review".

Hallux valgus deformity consists of a lateral deviation of the great toe, metatarsus varus, and pronation of the first metatarsal. Most osteotomies only correct varus, but not the pronation of the metatarsal. Persistent postoperative pronation has been shown to increase deformity recurrence and have worse functional outcomes. The proximal rotational metatarsal osteotomy (PROMO) technique reliably corrects pronation and varus through a stable osteotomy, avoiding fusing any healthy joints. The objective of this research is to show a prospective series of the PROMO technique. Twenty-five patients (30 feet) were operated with the PROMO technique. The sample included 22 women and 3 men, average age 46 years (range 22-59), for a mean prospective follow-up of 1 year (range 9-14 months). Inclusion criteria included symptomatic hallux valgus deformities, absence of severe joint arthritis, or inflammatory arthropathies, with a metatarsal malrotation of 10 degrees or more, with no tarsometatarsal subluxation or arthritis on the anteroposterior or lateral foot radiograph views. The mean preoperative and postoperative Lower Extremity Functional Scale (LEFS) score, metatarsophalangeal angle, intermetatarsal angle, metatarsal malrotation, complications, satisfaction, and recurrence were recorded. The mean preoperative and postoperative LEFS scores were 56 and 73. The median pre-/postoperative metatarsophalangeal angle was 32.5/4 degrees and the intermetatarsal angle 15.5/5 degrees. The metatarsal rotation was satisfactorily corrected in 24 of 25 patients. An Akin osteotomy was needed in 27 of 30 feet. All patients were satisfied with the surgery, and no recurrence or complications were found. PROMO is a reliable technique, with good short-term results in terms of angular correction, satisfaction, and recurrence. Long-term studies are needed to determine if a lower hallux recurrence rate occurs with the correction of metatarsal rotation in comparison with conventional osteotomies. IV, prospective case series.

MAKO robot-assisted total knee arthroplasty cannot reduce the aggravation of ankle varus incongruence after genu varus correction ≥ 10°: a radiographic assessment

IntroductionThe objective of this study was to investigate the ankle alignment alterations after the correction of knee varus deformity in MAKO robot-assisted total knee arthroplasty (MA-TKA).MethodsA retrospective analysis was conducted for 108 patients with TKA from February 2021 to February 2022. Patients were divided into two groups based on MAKO robot involvement during the procedure: the MA-TKA group (n = 36) and the conventional manual total knee arthroplasty (CM-TKA) group (n = 72). The patients were divided into four subgroups according to the degree of surgical correction of the knee varus deformity. Seven radiological measurements were evaluated pre and post-surgery: mechanical tibiofemoral angle (mTFA), mechanical lateral distal femoral angle (mLDFA), medial proximal tibial angle (MPTA), lateral distal tibial angle (LDTA), tibial plafond inclination angle (TPIA), talar inclination angle (TIA), and tibiotalar tilt angle (TTTA). TTTA is a quantitative representation of the extent of ankle incongruence.ResultsThe number of mTFA, mLDFA, and MPTA outliers in the MA-TKA group was significantly lower compared to the CM-TKA group (P<0.05). Knee varus deformity was properly corrected and the mechanical axis was restored in all patients, regardless of the treatment group. Only for varus corrections ≥ 10° did TTTA change significantly (p < 0.01) and ankle varus incongruence aggravate post-operation. The ΔTTTA correlated negatively with ΔTFA (r=-0.310,P = 0.001) and correlated positively with ΔTPIA (r = 0.490,P = 0.000). When the varus correction was ≥ 7.55°, the probability of ankle varus incongruence exacerbation increased 4.86-fold.ConclusionCompared with CM-TKA, MA-TKA osteotomy showed more precision but was unable to reduce post-operation ankle varus incongruence. When the varus correction ≥ 10°, ankle varus incongruence aggravated, while when the varus correction ≥ 7.55°, the probability of ankle varus incongruence increased 4.86-fold. This may occasion the pathogenesis of ankle pain following TKA.

3D MEDICAL IMAGING ANALYSIS, PATIENT-SPECIFIC INSTRUMENTATION AND INDIVIDUALIZED IMPLANT DESIGN, WITH ADDITIVE MANUFACTURING CREATES A NEW PERSONALIZED HIGH TIBIAL OSTEOTOMY TREATMENT OPTION

High Tibial Osteotomy is frequently performed to correct varus knees misalignment and thus to prevent end-stage osteoarthritis. Traditional systems lack pre-surgical planning and custom-fit fixation plates. A new 3D printed system has been developed for a personalized surgical procedure. This starts with careful correction planning based on a standard preoperative long leg radiograph and a 3D scan of the knee by Cone-Beam CT, both in weight-bearing. From the latter, a 3D model of the proximal tibia is reconstructed, on which the surgery is planned. This allows the design of the surgical guide and fixation plate to match the tibial surface topology and 3D printed in medical grade titanium alloy using selective-laser-sintering. During surgery, the guided osteotomy and controlled opening mechanism ensure an accurate correction; this is stabilized with the custom-fit plate secured to the proximal tibia using locking screws of appropriate length. After a brief learning curve, the mean discrepancy between the plan and the achieved alignment was [Formula: see text]. The surgical time was reduced by an average of approximately 30%. From medical imaging of the patient to product delivery to the hospital, the overall timeframe was about 15 days.

Surgical correction of cubitus varus in children with a lateral closing-wedge osteotomy: a comparison between two different techniques.

The primary objective of the present study is to compare the radiographic outcomes and complications of two different techniques for lateral closing-wedge osteotomy in pediatric patients with cubitus varus. We retrospectively identified patients treated at five tertiary care institutions: 17 underwent the Kirschner-wire (KW) technique, and 15 patients were treated with the mini external fixator (MEF) technique. Demographic data, previous treatment, pre- and postoperative carrying angle (CA), complications and additional procedures were recorded. Radiographic evaluation included assessment of the humerus-elbow-wrist angle (HEW), and the lateral prominence index (LPI). Patients treated with both KW and MEF achieved significant improvements in clinical alignment (mean pre-op CA -16 ± 6.1 degrees to mean post-op 8.9 ± 5.3 degrees, P < 0.001). There were no differences in final radiographic alignment or radiographic union time; however, time to achieve full elbow motion was faster in the MEF group (13.6 versus 34.3 weeks, P = 0.4547). Two patients (11.8%) in the KW group experienced complications, including one superficial infection and one failed correction that required unplanned revision surgery. Eleven patients in the MEF group underwent a planned second surgical procedure for hardware removal. Both fixation techniques are effective at correcting cubitus varus in the pediatric population. The MEF technique may have the advantage of shorter recovery of elbow range of motion but may require sedation for hardware removal. The KW technique may present a slightly higher complication rate.

Guided Growth for the Treatment of Cubitus Varus in Children: Medium- to Long-Term Results.

Correction of cubitus varus is commonly attempted through supracondylar humeral osteotomy. We hypothesized that lateral distal humeral hemiepiphysiodesis (LDHH) could be used to gradually correct this deformity in children. We conducted a retrospective study including all patients who underwent LDHH with the eight-Plate system between 2008 and 2018, with a minimum 4-year follow-up. We collected demographic, fracture-related, pre- and postoperative clinical (carrying angle (CA), ROM), and radiological data (humeral-ulnar angle (HUA), Baumann angle (BA), shaft-condylar angle (SCA), lateral capitellohumeral angle (LCHA)), as well as data on complications and satisfaction at last follow-up. Fifteen patients were included, with a median follow-up of 81 (64-103) months. All the variables had improved significantly as follows: CA -16 (-18 to -9)°, HUA -16 (-19 to -12)°, BA -11 (-17 to -7)°, SCA 7.5 (3.3 to 13.8)°, LCHA -4.8 (-6.8 to 0.6), flexion 10 (0 to 24)°, and extension 10 (0 to 10)°. The annual correction rate in terms of HUA was 2.41° (1.9 to 3.2). There were 5 cases of aseptic screw loosening, 4 of them requiring replacement, without relation to age at surgery (p = 0.324). Most patients (86.67%) were satisfied, and a relationship was found with younger age at surgery (p = 0.037). In conclusion, preliminary results show that LDHH with the eight-Plate system is an effective technique for mild to moderate cubitus varus deformity correction in children. Patients should be advised of the relatively long duration of implant retention and the possibility of reoperation for screw replacement or implant removal.

Femoral Deformity in Tibia Vara and Its Response to Growth Modulation.

While tibia vara is a disorder of the proximal tibial physis, femoral deformity frequently contributes to the overall limb malalignment. Our purpose was to determine how femoral varus deformity in tibia vara responds to growth modulation, with/without lateral tension band plating (LTBP) to the femur. One-hundred twenty-seven limbs undergoing LTBP for tibia vara were reviewed. All had tibial LTBP and 35 limbs also had femoral LTBP for varus. Radiographs were measured for correction of the mechanical lateral distal femoral angle (mLDFA) and mechanical axis deviation (MAD). Preoperative-femoral varus was defined with an age-adjusted guide: mLDFA >95 degrees for 2 to below 4 years and mLDFA >90 degrees for 4 to 18 years. The 35 limbs having femoral LTBP were compared with 50 limbs with femoral varus and no femoral LTBP. In addition, 42 limbs that did not have preoperative-femoral varus were followed. Patients with early-onset (below 7y) tibia vara were compared with those with late-onset (≥8y). Outcome success was based on published age-adjusted mLDFA and MAD norms. Following femoral LTBP, the mean mLDFA decreased from 98.0 to 87.1 degrees. All femurs had some improvement, with 28/35 femurs (80%) achieving complete correction. One limb, with late follow-up, overcorrected, requiring reverse (medial) femoral tension band plating.For the 50 limbs with femoral varus and only tibial LTBP, 16/22 limbs (73%) with early-onset and 11/28 limbs (39%) with late-onset completely corrected their femoral deformities. If the limb had preoperative-femoral varus, femoral LTBP statistically correlated with successful mLDFA correction and improvement of MAD, only in the late-onset group.Forty-two limbs, without preoperative-femoral varus, had no change in their mean mLDFA of 87 degrees. However, 4 femurs (10%) ended with posttreatment varus. Femoral LTBP is effective in correcting femoral varus deformity in the tibia vara. For femoral varus associated with late-onset tibia vara, femoral LTBP should be considered. Those that had femoral LTBP had statistically more successful femoral and overall limb varus correction. However, in early-onset tibia vara, with associated femoral varus, observation is warranted because 73% of femurs are corrected without femoral intervention. This study was underpowered to show additional improvement with femoral LTBP in the early-onset group. Even limbs with normal femoral alignment, should be observed closely for the development of femoral varus, during tibial LTBP treatment for tibia vara. Level III.