Volume Variation Research Articles

Functional guanine superstructures derived superior sodiophilic porous carbonaceous metamaterial for anodic-sodium-metal-free sodium metal batteries

Metamaterials, owing to their engineered building blocks, are considered as easily functionalized composites with designed nano-properties, sparking widespread research interest. However, the scalable synthesis and programmatically derived metamaterials into the designed nano-to-macro functionalized structure still pose significant challenges. Here, we report a fast and scalable synthesized Sn-guanine superstructures derived 1D porous carbonaceous metamaterial frameworks (Sn-NCS) that self-assembled by atomic Sn doping high nitrogen content carbon nanosheets. Due to the unique bottom-up designed nano-to-macro functionalized structural characteristics, Sn-NCS exhibited superior sodiophilic property. Using density functional theory (DFT) analysis and in-situ/ex-situ experimental characterization, we reveal that Sn-NCS can not only provide abundant Sn-N4 functional sites to minimize sodium nucleation overpotential and favors a uniform Na nucleation, but also effectively guide sodium deposition within the self-assembled porosity framework of Sn-NCS along the surface of carbon nanosheets to accommodate the volume variation and stress fluctuations within the anode, even under the extremely high current density of 120 mA/cm2 with a deposition/stripping capacity of 20 mAh/cm2. Moreover, the fabricated anode-sodium-metal-free sodium metal batteries (ASM-free SMB), using Cu-Sn-NCS (Sn-NCS coated Cu foil with a mass loading of 0.1 mg/cm2) as anodic current collector, exhibit highlighted energy density and excellent cycling reliability.

An Intelligent Manufacturing Management System for Enhancing Production in Small-Scale Industries

Industry 4.0 integrates the intelligent networking of machines and processes through advanced information and communication technologies (ICTs). Despite advancements, small mechanical manufacturing enterprises face significant challenges transitioning to ICT-supported Industry 4.0 models due to a lack of technical expertise and infrastructure. These enterprises commonly encounter variable production volumes, differing priorities in customer orders, and diverse production capacities across low-, medium-, and high-level outputs. Frequent issues with machine health, glitches, and major breakdowns further complicate optimizing production scheduling. This paper presents a novel production management approach that harnesses bio-inspired methods alongside Internet of Things (IoT) technology to address these challenges. This comprehensive approach integrates the real-time monitoring and intelligent production order distribution, leveraging advanced LoRa wireless communication technology. The system ensures efficient and concurrent data acquisition from multiple sensors, facilitating accurate and prompt capture, transmission, and storage of machine status data. The experimental results demonstrate significant improvements in data collection time and system responsiveness, enabling the timely detection and resolution of machine failures. Additionally, an enhanced genetic algorithm dynamically allocates tasks based on machine status, effectively reducing production completion time and machine idle time. Case studies in a screw manufacturing facility validate the practical applicability and effectiveness of the proposed system. The seamless integration of the scheduling algorithm with the real-time monitoring subsystem ensures a coordinated and efficient production process, ultimately enhancing productivity and resource utilization. The proposed system’s robustness and efficiency highlight its potential to revolutionize production management in small-scale manufacturing settings.

Variations in the Central Mode Water in the North Pacific as a manifestation of the Pacific Decadal Oscillation

The North Pacific Central Mode Water (CMW) is examined from the viewpoint of its volume variations. The volume of the CMW layers thicker than 150m\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$150 m$$\\end{document} is used as an index of CMW variations, which successfully represents the year-to-year and decadal variations in the CMW volume. The CMW index shows the variation close to that of the Pacific Decadal Oscillation (PDO). The CMW variation is strongly tied with large-scale, dominant variations in sea surface temperature (SST), surface dynamic height (SDH), and sea surface height (SSH) anomalies in the North Pacific, with a significant correlation with the PDO. Year-to-year and decadal variations of CMW volume in May to July are significantly correlated with the wintertime Aleutian Low and 500hPa\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$hPa$$\\end{document} geopotential height variations, which indicates that the Aleutian Low induces the eastward extension/retreat of the strong winter westerlies and resultant net surface heat flux anomaly over the CMW distribution region. Thus, the CMW volume variation can be regarded as a significant manifestation of the PDO. The SST, SDH, and SSH anomalies are associated with the surface cooling in the northern sector of the CMW distribution region. On the other hand, the SDH and SSH anomalies throughout a year and the SST anomaly in the cold season in the southeastern sector of the CMW region are formed due to the heaving of isopycnal surfaces in the subsurface layer above the CMW in response to its volume variations.

Redox Stability Optimization in Anode-Supported Solid Oxide Fuel Cells.

For Ni-YSZ anode-supported solid oxide fuel cells (SOFCs), the main drawback is that they are susceptible to reducing and oxidizing atmosphere changes because of the Ni/NiO volume variation. The anode expansion upon oxidation can cause significant stresses in the cell, eventually leading to failure. In order to improve the redox stability, an analytical model is developed to study the effect of anode structure on redox stability. Compared with the SOFC without AFL, the tensile stresses in the electrolyte and cathode of SOFC with an anode functional layer (AFL) after anode oxidation are increased by 27.07% and 20.77%, respectively. The thickness of the anode structure has a great influence on the structure's stability. Therefore, the influence of anode thickness and AFL thickness on the stress in these two structures after oxidation is also discussed. The thickness of the anode substrate plays a more important role in the SOFC without AFL than in the SOFC with AFL. By increasing the thickness of the anode substrate, the stresses in the electrolyte and cathode decrease. This method provides a theoretical basis for the design of a reliable SOFC in the redox condition and will be more reliable with more experimental proofs in the future.

Characteristics of intra-annual distribution of precipitation and incoming water and the synchronization analysis of their changes in the lower reaches of the Yangtze river basin

Precipitation and incoming water are the key contributing factors to local flooding events, and analyzing the intra-annual distribution and change characteristics of precipitation and incoming water will be beneficial to the understanding of flooding contributing factors in this region. In this paper, the characteristics of intra-annual distribution of precipitation and incoming water and the synchronization of their changes in the lower reaches of the Yangtze River Basin (LYRB) from 1980 to 2020 are studied using the concentration degree and concentration period as quantitative indicators. The results are as follows: 1) the maximum precipitation occurs earlier in the year, while maximum incoming water occurs with little variation in timing but significant variation in total volume; 2) the concentration degree of both precipitation and incoming water show a slowly decreasing trend. The concentration period of precipitation is slightly advanced, and that of incoming water is significantly delayed; 3) the occurrence time and concentration period of the incoming water peak during 2010–2020 lagged behind that of precipitation, which played a role in suppressing the occurrence of floods in the LYRB. This study can provide a scientific basis for the future supply and demand of water resources in the LYRB for safe use.

Analysis of hemodynamics and impedance using bioelectrical impedance analysis in hypovolemic shock-induced swine model

To treat hypovolemic shock, fluid infusion or blood transfusion is essential to address insufficient volume. Much controversy surrounds resuscitation in hypovolemic shock. We aimed to identify the ideal fluid combination for treating hypovolemic shock-induced swine model, analyzing bioelectrical impedance and hemodynamics. Fifteen female three-way crossbred pigs were divided into three different groups. The three resuscitation fluids were (1) balanced crystalloid, (2) balanced crystalloid + 5% dextrose water, and (3) balanced crystalloid + 20% albumin. The experiment was divided into three phases and conducted sequentially: (1) controlled hemorrhage (1 L bleeding, 60 min), (2) resuscitation phase 1 (1 L fluid infusion, 60 min), and (3) resuscitation phase 2 (1 L fluid infusion, 60 min). Bioelectrical impedance analysis was implemented with a segmental multifrequency bioelectrical impedance analyzer. A total of 61 impedance measurements were assessed for each pig at six different frequencies in five segments of the pig. Pulse rate (PR), mean arterial pressure (MAP), stroke volume (SV), and stroke volume variation (SVV) were measured using a minimally invasive hemodynamic monitoring device. The three-dimensional graph showed a curved pattern when infused with 1 L of balanced crystalloid + 1 L of 5% dextrose water and 1.6 L of balanced crystalloid + 400 ml of 20% albumin. The 1M impedance increased in all groups during the controlled hemorrhage, and continuously decreased from fluid infusion to the end of the experiment. Only balanced crystalloid + 20% albumin significantly restored MAP and SV to the same level as the start of the experiment after the end of fluid infusion. There were no significant differences in MAP and SV from the time of recovery to the initial value of 1M impedance to the end of fluid infusion in all groups. The change and the recovery of hemodynamic indices such as MAP and SV coincide with the change and the recovery of 1M impedance. Using balanced crystalloid mixed with 20% albumin in hypovolemic shock-induced swine model may be helpful in securing hemodynamic stability, compared with balanced crystalloid single administration.

Vacancy‐Rich Ternary Iron Phosphoselenide Multicavity Nanorods: A Highly Reversible and Fast Anode for Sodium‐Ion Batteries

AbstractThe significance of exploring optimal electrode materials cannot be overstated, particularly in mitigating the critical issues posed by sluggish redox kinetics, significant volume variations, and severe structural collapse resulting from the insertion and extraction of sodium ions. These efforts are crucial for enhancing the longevity and rapid charging capabilities of sodium‐ion batteries (SIBs). Herein, a defect engineering strategy for the in situ encapsulation of single‐phase ternary iron phosphoselenide into porous carbon by robust chemical bonds with the formation of rod‐like multicavity nanohybrids (FePSe3@C) is presented. The incorporation of Se atom not only modulates the electronic structure of the central metal Fe atom and enhances the intrinsic electrical conductivity, but also generates numerous additional reaction sites and accelerates the reaction kinetics of FePSe3@C, as corroborated by theoretical calculations and kinetic analysis. Notably, the FePSe3@C demonstrates an outstanding rate capability of 321.7 mAh g−1 even at 20 A g−1 and long cycling stability over 1000 cycles. The sodium‐ion full cell, pairing the FePSe3@C anode with the Na3V2(PO4)3@C cathode, exhibits a remarkable energy density of 202 Wh kg−1, demonstrating its practical applicability. This work provides a controllable defect and morphology engineering strategy to construct advanced materials with fast charge transfer for high‐power/energy SIBs.

Assessing the impact of nodule features and software algorithm on pulmonary nodule measurement uncertainty for nodules sized 20 mm or less.

Measurements are not exact, so that if a measurement is repeated, one would get a different value each time. The spread of these values is the measurement uncertainty. Understanding measurement uncertainty of pulmonary nodules is important for proper interpretation of size and growth measurements. Larger amounts of measurement uncertainty may require longer follow-up intervals to be confident that any observed growth is due to actual growth rather than measurement uncertainty. We examined the influence of nodule features and software algorithm on measurement uncertainty of small, solid pulmonary nodules. Volumes of 107 nodules were measured on 4-6 repeated computed tomography (CT) scans (Siemens Somatom AS, 100 kVp, 120 mA, 1.0 mm slice thickness reconstruction) prospectively obtained during CT-guided fine needle aspiration biopsy between 2015-2021 at Department of Diagnostic, Molecular, and Interventional Radiology in Icahn School of Medicine at Mount Sinai, using two different automated volumetric algorithms. For each, the coefficient of variation (standard deviation divided by the mean) of nodule volume measurements was determined. The following features were considered: diameter, location, vessel and pleural attachments, nodule surface area, and extent of the nodule in the three acquisition dimensions of the scanner. Median volume of 107 nodules was 515.23 and 535.53 mm3 for algorithm #1 and #2, respectively with excellent agreement (intraclass correlation coefficient =0.98). Median coefficient of variation of nodule volume was low for the two algorithms, but significantly different (4.6% vs. 8.7%, P<0.001). Both algorithms had a trend of decreasing coefficient of variation of nodule volume with increasing nodule diameter, though only significant for algorithm #2. Coefficient of variation of nodule volume was significantly associated with nodule volume (P=0.02), attachment to blood vessels (P=0.02), and nodule surface area (P=0.001) for algorithm #2 using a multiple linear regression model. Correlation between the coefficient of variation (CoV) of nodule volume and the CoV of the x, y, z measurements for algorithm #1 were 0.29 (P=0.0021), 0.25 (P=0.009), and 0.80 (P<0.001) respectively, and for algorithm #2, 0.46 (P<0.001), 0.52 (P<0.001), and 0.58 (P<0.001), respectively. Even in the best-case scenario represented in this study, using the same measurement algorithm, scanner, and scanning protocol, considerable measurement uncertainty exists in nodule volume measurement for nodules sized 20 mm or less. We found that measurement uncertainty was affected by interactions between nodule volume, algorithm, and shape complexity.

A Novel Method to Assess Healing of Segmental Bone Defects using the Induced Membrane Technique.

Clinical concerns exist regarding the quality of bony consolidation in the context of the induced membrane technique. This study evaluates the clinical process of bone grafting in the second stage of induced membrane bone union in patients with tibial bone defects to infer the possibility of non-union and establish a reliable and effective evaluation method combined with computed tomography (CT) to assess fracture healing. Patients with tibial bone defects who underwent the induced membrane technique at our hospital between February 2017 and February 2020 were retrospectively analyzed. The Hounsfield unit (HU) values of the patients were evaluated at different times during the second stage of bone grafting. Bone healing at the boundary value of the 120 HU output threshold (-1024 HU-3071 HU) was directionally selected, and the changes in the growth volume of union (new bone volume [selected according to HU value]/bone defect volume) were compared with analyzing individual class bone union. Method 1 involved X-rays revealing that at least three of the four cortices were continuous and at least 2 mm thick, with the patient being pain free. For Method 2, new bone volume (selected according to HU value/bone defect volume) at the stage was compared with analyzing individual class healing. Receiver operating characteristic curve analysis was used for Methods 1 and 2. A total of 42 patients with a segmental bone defect with a mean age of 40.5 years (40.5 ± 8.3 years) were included. The relationship between bone graft volume and time variation was analyzed by single factor repeated variable analysis (F = 6.477, p = 0.016). Further, curve regression analysis showed that the change in bone graft volume over time presented a logarithmic curve pattern (Y = 0.563 + 0.086 × ln(X), Ra2 = 0.608, p = 0.041). ROC curve analysis showed that Method 2 is superior to Method 1 (AUC: 86.3% vs. 68.3%, p < 0.05). The induced membrane technique could be used to treat traumatic long bone defects, with fewer complications and a higher healing rate. The proposed imaging grading of HU (new bone volume/bone defect volume) can be used as a reference for the quality of bony consolidation with the induced membrane technique.

Biomass specific perfusion rate as a control lever for the continuous manufacturing of biosimilar monoclonal antibodies from CHO cell cultures.

Continuous manufacturing enables high volumetric productivities of biologics such as monoclonal antibodies. However, it is challenging to maintain both high viable cell densities and productivities at the same time for long culture durations. One of the key controls in a perfusion process is the perfusion rate which determines the nutrient availability and potentially controls the cell metabolism. Cell Specific Perfusion Rate (CSPR) is a feed rate proportional to the viable cell density while Biomass Specific Perfusion Rate (BSPR) is a feed rate proportional to the biomass (cell volume multiply bycell density). In this study, perfusion cultures were run at three BSPRs in the production phase. Low BSPR favored a growth arresting state that led to gradual increase in cell volume, which in turn led to an increase in net perfusion rate proportional to the increase in cell volume. Consequently, at low BSPR, while the cell viability and cell density decreased, high specific productivity of 55 pg per cell per day was achieved. In contrast, the specific productivity was lower in bioreactors operating at a high BSPR. The ability to modulate the cell metabolism by using BSPR was confirmed when the specific productivity increased after lowering the BSPR in one of the bioreactors that was initially operating at a high BSPR. This study demonstrated that BSPR significantly influenced cell growth, metabolism, and productivity in cultures with variable cell volumes.

Hemodynamic Changes of Women with Preeclampsia Undergoing Spinal Anesthesia for Emergency Cesarean Section: A Prospective Observational Study

Abstract Background: Preeclampsia is a multisystem disorder in pregnancy and remains a significant cause of maternal morbidity and mortality. In this prospective observational study, we used a continuous noninvasive cardiac output monitor to investigate the changes in arterial blood pressure, cardiac output, systemic vascular resistance, stroke volume, and stroke volume variation during the immediate perioperative period. Materials and Methods: Women with preeclampsia undergoing emergency cesarean section under spinal anesthesia were recruited in this prospective observational study. Cardiac output and arterial blood pressures were measured by the Nexfin monitor. Cardiovascular parameters were recorded intraoperatively and up to 48 h postoperatively. The primary outcome was to examine the differences in cardiac output between the intraoperative and postoperative periods. Results: Thirty patients included in the data analysis had a mean age of 35.6 ± 5.2 years and gestation of 35.4 ± 2.1 weeks. Post-spinal anesthesia, 50% experienced hypotension. 26.7% had nausea, 10% vomited, and other events included shivering, reactive hypertension, and bradycardia. The use of spinal anesthesia was associated with a significant reduction in systolic (126.7 ± 16.9 vs. 142.0 ± 21.2 mm Hg, P &lt; 0.001), diastolic (71.2 ± 8.4 vs. 77.0 ± 11.3 mm Hg, P &lt; 0.001), mean arterial pressure (92.6 ± 12.2 vs. 103.7 ± 15.3 mm Hg, P &lt; 0.001), cardiac output, and stroke volume compared to postoperative readings. No significant difference was found in cardiac output, cardiac index, or systemic vascular resistance indices between the intraoperative and postoperative periods. Conclusion: Spinal anesthesia may have short-term hemodynamic changes in women with preeclampsia. Continuous noninvasive cardiac monitoring can be used to monitor specific cardiac hemodynamic parameters, which may resolve in the immediate postoperative period.

Ethanol distillation performance test of porang flour processing residue in SME scale distillator

Abstract One of the porang processing steps involves the production of porang flour with glucomannan concentrations that meet market requirements. To increase glucomannan levels, impurities are separated. The common solvent used is ethanol. In the extraction procedure, ethanol is not only used once but reused in another extraction procedure by redistilled to increase the concentration of ethanol. This study’s objective is to determine and analyze the effect of input volume variations (5,7.5 and 10 liters) at heating temperatures (85°C, 90°C, and 95°C) on ethanol product volume and concentration. In the distillation process 5; 7.5 and 10 L, ethanol levels respectively in the range of 58.41-71.87%, 61.81-65.87, and 63.76-65.93%. Based on the analysis, the constant value (k) in the change of ethanol distillation level during the distillation process predicted at 5L volume were 0.0149, 0.0160, and 0.0182, for 7.5L volume were 0.0098, 0.0134, and 0.0153, 0.0071, 0.0083, and 0.0102 minutes−1 at 10 L sample volume for each distillation temperature. The optimal values for a distillation device evaluated on a Small Medium Enterprises (SME) scale by varying the volume and temperature of the substance in the distillation vessel were determined to be 5 liters of volume and 95°C, respectively.

Ultra-Fast-Charging, Long-Duration, and Wide-Temperature-Range Sodium Storage Enabled by Multiwalled Carbon Nanotube-Hybridized Biphasic Polyanion-Type Phosphate Cathode Materials.

Sodium-ion batteries (SIBs) represent a promising energy storage technology with great safety. Because of their high operating potential, superior structural stability, and prominent thermal stability, polyanion-type phosphates have garnered significant interest in superior prospective cathode materials for SIBs. Nevertheless, the disadvantages of poor intrinsic electronic conductivity, sluggish kinetics, and volume variation during sodiation/desodiation remain great challenges for satisfactory rate performance and cycle stability, which severely hinder their further practical applications. In this work, by adjusting the amounts of pretreated multiwalled carbon nanotubes (CNT) added intentionally at the beginning of the preparation, biphasic polyanion-type phosphate materials (marked as NFC) are synthesized through a one-pot solid state reaction methodology, which are composed of CNT-interwoven Na3V2(PO4)2F3 (NVPF) and a small amount of Na3V2(PO4)3 (NVP). Benefiting from the improved electronic conductivity and unique composition and structure, the optimized sample (labeled as NFC-2) illustrates exceptional cycle stability and remarkable rate performance. The discharge capacities of the NFC-2 electrode are 114.8 and 78.6 mAh g-1 tested at 20 and 5000 mA g-1, respectively. Notably, such an electrode still gives out 75.7% capacity retention upon 10 000 cycles at 5000 mA g-1. In situ X-ray diffraction analysis demonstrates that the NFC-2 cathode has outstanding structural reversibility during charge/discharge cycles. More importantly, such a biphasic material has achieved impressive electrochemical performance within a wide operating temperature range of -20-50 °C. When temperature is decreased to -20 °C, the NFC-2 electrode still delivers an initial discharge capacity of 102.4 mAh g-1 and exhibits a remarkable capacity retention of 97.8% even after 500 cycles at 50 mA g-1. In addition, the sodium-ion full cell assembled by integrating NFC-2 cathode and hard carbon anode shows a satisfying energy density of 431.3 Wh kg-1 at 20 mA g-1 with a better long-term cycle performance. The synergistic effect among high energy NVPF, conductive CNT, and stable NVP may lead to the great improvement in the electrochemical sodium storage performance of the NFC-2 sample. Such biphasic polyanion-type phosphate materials will inject new ideas into the material design for SIBs with excellent electrochemical performance and further promote practical applications of this advanced energy storage technology.

Unveiling compositional images of specific proteins in individual cells by LA-ICP-MS: Labelling with ruthenium red and metal nanoclusters

BackgroundRecent biological studies have demonstrated that changes can occur in the cellular genome and proteome due to variations in cell volume. Therefore, it is imperative to take cell volume into account when analyzing a target protein. This consideration becomes especially critical in experimental models involving cells subjected to different treatments. Failure to consider cell volume could obscure the studied biological phenomena or lead to erroneous conclusions. However, quantitative imaging of proteins within cells by LA-ICP-MS is limited by the lack of methods that provide the protein concentration (protein mass over cell volume) rather than just protein mass within individual cells. ResultsThe combination of a metal tagged immunoprobe with ruthenium red (RR) labelling enables the simultaneous analysis of a specific protein and the cell volume in each cell analyzed by LA-ICP-(Q)MS. The results indicate that the CYP1B1 concentration exhibits a quasi–normally distribution in control ARPE-19 cells, whereas AAPH–treated cells reveal the presence of two distinct cell groups, responding and non–responding cells to an in vitro induced oxidative stress. The labelling of the membrane with RR and the measurement of Ru mass in each cell by LA-ICP-MS offers higher precision compared to manually delimitation of the cell perimeter and eliminates the risk of biased information, which can be prone to inter–observer variability. The proposed procedure is fast and minimizes errors in cell area assignment and offers the possibility to carry out a faster data treatment approach if just relative volumes are compared, which can be advantageous for specific applications. Significance and noveltyThis work presents an innovative strategy to directly study the distribution and concentration of proteins within individual cells by LA-ICP-MS. This method employs ruthenium red as a cell volume marker and Au nanoclusters (AuNCs) tagged immunoprobes to label the protein of interest. Furthermore, the proposed labelling strategy enables rapid data processing, allowing for the calculation of relative concentrations and thus facilitating the comparison across large datasets. As a proof–of–concept, the concentration of the CYP1B1 protein was quantified in ARPE-19 cells under both control and oxidative stress conditions.

Amorphous and crystalline Sb2S3 nanoparticles embedded in N/S co-doped carbon as anodes for potassium-ion batteries

Antimony trisulfide (Sb2S3) has emerged as a promising anode candidate for potassium-ion batteries (PIBs) owing to its low cost and high theoretical specific capacity. However, its large volume expansion upon K+ storage and sluggish kinetics result in poor cycling performance and rate capability. To address these challenges, rational structural design is highly desirable. Herein, we report the synthesis of amorphous and crystalline Sb2S3 nanoparticles embedded in N/S co-doped carbon composites (a-Sb2S3@NSC and c-Sb2S3@NSC) via a facile organic coating combined with subsequent carbonization and sulfidation processes. When used as a PIBs anode material, a-Sb2S3@NSC exhibits a high discharge specific capacity of 415.6 mAh g−1 after 50 cycles at 200 mA g−1 and a stable rate capability (224.8 mAh g−1 at 2 A g−1), which remarkably outperforms that of the c-Sb2S3@NSC with inferior specific capacity (311.5 mAh g−1) and poor rate capability (67.7 mAh g−1). The amorphous structure of Sb2S3 nanoparticles in a-Sb2S3@NSC provides abundant defects and structural disorder, which reduces the entropy energy and activation barrier associated with K+ incorporation, effectively facilitating the transport and storage of K+. Moreover, the synergistic interactions between amorphous Sb2S3 nanoparticles and N/S co-doped carbon can effectively improve the electron/ion reaction kinetics and buffer volume variations, thus leading to superior potassium storage performances.

Fabrication of a durable omniphobic thin film and its application in precision nozzles

The ultrafine nozzles used in micropatterning processes easily encounter pollution on the nozzle surfaces, such as clogging, liquid clumping, and bond tailing. In this study, an omniphobic functional film was developed by an initiated chemical vapor deposition (iCVD) method and used to fabricate an antifouling nozzle. In the iCVD process, polymeric fluorine films were grown under optimized conditions, and their durability was analyzed through abrasion and nanoscale cutting tests to evaluate the surface wear resistance and adhesion strength, respectively. Two omniphobic films, prepared using homopolymer p(C6FMA) and copolymer p(C6FMA-co-DVB), were compared; the p(C6FMA-co-DVB) film was determined to have a superior durability than the p(C6FMA) film. Consequently, the p(C6FMA-co-DVB) film was deposited on both the inside and outside surface of a nozzle of diameter 0.3 mm. The oleophobicity was examined by comparing the discharge rates of a high-viscosity epoxy paste containing metal powders in coated and bare nozzles. The bare nozzle exhibited significant variations in discharge volume and frequently experienced clogging, while coated nozzles demonstrated consistent discharge rates and remained unclogged. These findings suggest that the proposed thin film coating has the potential to increase the lifespan and efficiency of ultra-fine nozzles in the automated micro-patterning industry.

Annealing Modulation Defect Chemistry toward High-Performance Sodium-Layered Cathodes.

Layered sodium transition-metal oxides generally encounter severe capacity decay and inferior rate performance during cycling, especially at a high state of charge. Herein, defect concentration is rationally modulated to explore the impact on electrochemical behavior in NaNi1/3Fe1/3Mn1/3O2 layered oxides. Bulk vacancies are increased through annealing in an oxygen-rich atmosphere, demonstrated by electron paramagnetic resonance measurement. It is found that the cathode with enriched oxygen vacancies exhibits significantly enhanced reversibility of redox reactions with a higher initial Coulombic efficiency of 90.0%. Furthermore, the reduced volume variations during the initial charge/discharge process are also confirmed by in situ X-ray diffraction. As a result, the oxygen-vacancy-rich cathode shows great cycling stability and superior rate performances. Also, full cells deliver a specific capacity of approximately 145.2 mAh g-1 at 0.5 C, with a high capacity retention of 78.3% after 100 cycles. This work presents a viable strategy for designing Na+ intercalated cathodes with a high-energy density.

Prediction of fluid responsiveness in spontaneously breathing patients with hemodynamic stability: a prospective repeated-measures study

Evaluating fluid responsiveness with dynamic parameters is recommended for fluid management. However, in hemodynamically stable patients who are breathing spontaneously, accurately measuring stroke volume variation via echocardiography and passive leg raising is challenging due to subtle SV changes. This study aimed to identify normal SV changes in healthy volunteers and evaluate the precision of hemodynamic parameters in screening mild hypovolemia in patients. This prospective, repeated-measures, cross-sectional study screened 269 subjects via echocardiography. Initially, 45 healthy volunteers underwent a fluid challenge test, the outcomes of which served as criteria to screen 215 ICU patients. Among these patients, 53 underwent additional fluid challenge testing. Hemodynamic parameters, including medians of maximum velocity time integrals (VTImaxs), peak velocity of VTImax (PV), internal jugular vein diameters (IJVD), and area (IJVA) were repeatedly measured first at a 60° upper body elevation (UBE), second in a supine position, third at UBE, fourth in a supine position, and lastly in a supine position after fluid loading. The hemodynamic responses to the position changes were compared between 83 fluid non-responders and 15 fluid responders. Fluid responsiveness was defined as fluid-induced medians’ change of VTImaxs (fluid-induced median VTImax change) ≥ 10%. None of the healthy volunteers showed the mean value of repeatedly measured medians of VTImaxs ≥ 7%, following either UBE position (UBE-induced median VTImax change) or fluid loading (fluid-induced median VTImax change). UBE-induced median VTImax and PV changes were significantly correlated with fluid responsiveness (p < 0.001, AUC 0.959; p < 0.001, AUC 0.804). The significant correlations were demonstrated via multivariable analysis using binary logistic regression (p = 0.001, OR 90.1) and the correlation coefficient (R2 = 0.793) using linear regression analysis. UBE-induced median VTImax changes (≥ 11.8% and 7.98%) predicted fluid-induced median VTImax changes ≥ 10% and 7% (AUC 0.959 and 0.939). The collapsibility and variation of IJVD and IJVA showed no significant correlation. An increase in the mean value of medians of repeatedly measured VTImaxs transitioning from an UBE to a supine position, effectively screened mild hypovolemia and demonstrated a significant correlation with fluid responsiveness in spontaneously breathing patients maintaining hemodynamic stability.

Heterostructure Interface Construction of Cobalt/Molybdenum Selenides toward Ultra‐Stable Sodium‐Ion Half/Full Batteries

AbstractTransition metal selenides (TMSes) are considered promising candidates for the anodes of sodium‐ion batteries (SIBs) due to their substantial theoretical capacity. However, TMSes still face with inferior cycling lifespan caused by sluggish Na+ diffusion kinetics and vigorous volume variations during dis/charge processes. Engineering heterostructure is an attractive solution for rapid Na+ transfer, and introducing carbonaceous materials also facilitates enhanced conductivity and structural stability. Herein, CoSe/MoSe2 heterostructure combined with homogeneous carbon composites are rational designed. The kinetic analysis and theoretical calculations verified that heterointerface engineering induced build‐in electric field effect can amplifies the Na+ diffusion kinetics, while carbon contributes to enhanced electrical conductivity and structural stability. Expectedly, the CoSe/MoSe2‐C exhibits high capacity and extremely ultra‐long lifespan (320.9 mAh g−1 at 2.0 A g−1 over 10,000 cycles with an average decay of only 0.01781 mAh g−1 per cycle). Furthermore, in situ X‐ray diffraction (XRD), ex situ X‐ray photoelectorn (XPS), and high‐resolution electron microscopy (HRTEM) are exploited to explore the Na+ storage mechanism. In addition, the Na3V2(PO4)3@rGO//CoSe/MoSe2‐C (NVP@rGO//CoSe/MoSe2‐C) pouch‐type full‐cells are successfully assembled and delivered satisfactory performance. This research presents a viable strategy for the targeted engineering of TMSes aimed at enhancing the efficiency of SIBs.

Vasoconstriction with phenylephrine increases cardiac output in preload dependent patients

General Anaesthesia (GA) is accompanied by a marked decrease in sympathetic outflow and thus loss of vasomotor control of cardiac preload. The use of vasoconstriction during GA has mainly focused on maintaining blood pressure. Phenylephrine (PE) is a pure α1-agonist without inotropic effects widely used to correct intraoperative hypotension. The potential of PE for augmenting cardiac stroke volume (SV) and -output (CO) by venous recruitment is controversial and no human studies have explored the effects of PE in preload dependent circulation using indicator dilution technique. We hypothesized that PE-infusion in patients with cardiac stroke volume limited by reduced preload would restore preload and thus augment SV and CO. 20 patients undergoing GA for gastrointestinal surgery were monitored with arterial catheter and LiDCO unity monitor. Upon stable haemodynamics after induction patients were placed in head-up tilt (HUT). All patients became preload responsive as verified by a stroke volume variation (SVV) of > 12%. PE-infusion was then started at 15-20mikrg/min and adjusted until preload was restored (SVV < 12%). Li-dilution cardiac output (CO) was initially measured after induction (baseline), again with HUT in the preload responsive phase, and finally when preload was restored with infusion of PE.At baseline SVV was 10 ± 3% (mean ± st.dev.), CI was 2,6 ± 0,4 L/min*m2, and SVI 43 ± 7mL/m2. With HUT SVV was 19 ± 4%, CI was 2,2 ± 0,4 L/min*m2, SVI 35 ± 7mL/m2. During PE-infusion SVV was reduced to 6 ± 3%, CI increased to 2,6 ± 0,5 L/min*m2, and SVI increased to 49 ± 11mL/m2. All differences p < 0,001. In conclusion: Infusion of phenylephrine during preload dependency increased venous return abolishing preload dependency as evaluated by SVV and increased cardiac stroke volume and -output as measured by indicator-dilution technique. (ClinicalTrials.gov NCT05193097).