Variation Of Cross Section Research Articles

Accelerating Deep Learning in Radar Systems: A Simulation Framework for 60 GHz Indoor Radar

FMCW radar systems are increasingly used in diverse applications, and emerging technologies like JCAS offer new opportunities. However, machine learning for radar faces challenges due to limited application-specific datasets, often requiring advanced simulations to supplement real-world data. This paper presents a setup for generating synthetic radar data for indoor environments, evaluated using CNNs. The setup involves comprehensive modeling, including far-field antenna simulations, variations in human radar cross-section, and detailed representations of indoor environments with their corresponding propagation channel properties. These synthetic data are used to train CNNs, and their performance is assessed on real measurement data. The results demonstrate that CNNs trained on synthetic data can perform well when tested on real measurement data. Specifically, the models trained with synthetic data showed performance comparable to models trained with real measurement data, which required a minimum of 300 samples to reach similar levels of accuracy. This result demonstrates that synthetic data can effectively train neural networks, providing an alternative to real measurement data, particularly when collecting sufficient real-world samples is difficult or costly. This approach significantly reduces the time required for generating datasets, and the ability to quickly label data in simulations simplifies and accelerates post-processing. Additionally, the generated datasets can be made more heterogeneous by introducing varying signal conditions, enhancing the diversity and robustness of the training data.

Study on Compression Bearing Capacity of Tapered Concrete-Filled Double-Skin Steel Tubular Members Based on Heuristic-Algorithm-Optimized Backpropagation Neural Network Model

A tapered concrete-filled double-skin steel tubular (TCFDST) structure has been used as the main framework in transmission towers, offshore facility platforms, and turbine towers owing to its excellent mechanical properties. In order to solve the difficulties of calculating the axial compressive capacity of TCFDST members due to the variations in cross-section, this paper applied heuristic optimization algorithms such as Genetic Algorithms (GAs), Particle Swarm Optimization (PSO), Simulated Annealing (SA), and Ant Colony Optimization (ACO) to enhance a Backpropagation Neural Network (BPNN) model. A predictive model incorporating both global and local optimization strategies for the axial compressive capacity of a TCFDST structure is proposed. A comprehensive axial database for TCFDST members, comprising 1327 sets of experimental and finite element analysis results, was established, with ten types of component dimensions and material parameters selected as input variables and compressive bearing capacity as the output variable. This study developed and assessed four BPNN models, each optimized by a different heuristic algorithm, against various machine learning algorithms and standards. The heuristic-algorithm-optimized BPNN models demonstrated superior accuracy in predicting the axial compressive capacity of TCFDST members. Through parametric analysis, this study identified the relationship between the model’s bearing capacity predictions and each input parameter, confirming the model’s broad applicability. The optimized BPNN model, refined with heuristic algorithms, provides a significant reference for addressing the computational challenges associated with the load-bearing capacity of TCFDST structures and facilitating their application.

Experimental and numerical study of lean combustion of propane in divergent porous media burners

Porous inert media burners for industrial applications demand the utilization of flame front stabilization methods, among which the convective or cross-section variation technique stands out. In this work, combustion of lean premixed propane-air mixtures in cylindrical and divergent alumina packed-bed porous inert media burners was numerically and experimentally conducted. Three burners of 0°, 15° and 30° of divergence were used to study the variation of equivalence ratio and inlet velocity. A bidimensional transient mathematical model was developed and solved numerically, whose results show good agreement with experimental measurements. The maximum temperature along the central axis is location dependent, with upstream augmentation of up to 86 %, meaning an increase of ∼ 815 K in the case of the 30° burner. Combustion front propagation velocity of upstream regime flames show acceleration in both divergent burners due to heat transfer and increment of thermal power in relation to cross-sectional areas when reaching the inlet. In comparison to cylindrical burner, a concave shape of the combustion front and a stretch of the maximum temperature zone was obtained, due to the diffusive nature of the velocity field. Stabilized flames on both divergent burners were achieved in the equivalence ratio range from 0.4 to 0.6. Residence time of product gases is greatly prolonged with burner wall angle and the decrease in overall temperature towards the outlet.

Exploring the influence of flexural rigidity variability of aquatic plants on stem deflection geometry and flow characteristics

The existing assumption of a constant flexural rigidity (EI) for the entire height of aquatic plants in the analysis of flow past flexible vegetation may not translate in to real scenario as EI of a flexible plant stem varies along the height due to variation in tissue structure and cross section. This variation is therefore needed to be effectively quantified for better analysis of flow-vegetation interaction. In this regard, the own-weight cantilever method was used to represent the variability of EI along the stem height of three plants: water lily, water chestnut, and lotus. Analytical models are proposed to predict stem deflection geometry and vertical velocity distribution across channel depth incorporating EI as a function of stem height. Analytical and experimental data, obtained from open-channel flume tests, significantly support the developed models and confirm the assumption of variable flexural rigidity. Further investigations show that the flexural rigidity, transcends being a mere constant numeric value; it profoundly influences various aspects of the fluid-vegetation interaction such as: the extent of deflection geometry, velocity reduction, Reynold stress variation, and penetration length. Therefore, this study is crucial for better understanding of the physics of sediment transport, pollutant mixing, and wetland management and restoration.

An improved method for evaluating fracture density using pulsed neutron capture logging

Fracture density is a critical fracture evaluation parameter for the optimization and production prediction of hydraulic fracturing models. Nonradioactive tracer (NRT) techniques have successfully used a quantitative fracture density method based on neutron-induced gamma rays from formation elements. Furthermore, fracture density can be calculated using the formation capture cross section before and after hydraulic fracturing based on pulsed neutron capture logging. However, the response sensitivity of the macroscopic scattering cross section to the fractures decreases when the fracture density is high due to the neutron self-shielding phenomenon. Therefore, an improved fracture density evaluation method is applied, which combines the macroscopic capture cross section and the neutron self-shielding correction factor. In the new method, the peak area of titanium from the captured gamma spectrum is used to obtain a neutron self-shielding correction factor to improve the sensitivity of fracture density determination. Furthermore, the response of capture cross-section variation to fracture density at various tagged proppant concentrations and formation backgrounds is investigated. The findings indicate that the tagged proppant concentration influences the detection limit of fracture density and the sensitivity of fracture density identification. The accurate calculation range of fracture density using the new method has been extended from 5% to 10% under the condition that the tagged proppant concentration is 0.2%. Meanwhile, whereas water salinity significantly impacts capture cross-section variation, the effects of porosity, lithology, and fluid type on capture cross-section variation are negligible. A simulated fracturing example demonstrates the method’s applicability in various measurement environments. The results show that fracture density and height are consistent with the model settings after correcting for water salinity, and the fracture density calculation error is less than 3%. Therefore, our evaluation method for fracture density corrected for the neutron self-shielding effect improves response sensitivity and fracture density calculation accuracy.

Evaluation of Thorax Diameter Changes through Trunk Morphology and Different Running Intensities

During breathing, the human thorax is expanded or contracted during inspiration and expiration. The morphology of the thorax seems to be determinant for endurance efforts. This study aims to analyse the variation of the thorax cross-sections during running exercises at different intensities and the influence of thorax morphology. Twenty-two athletes were captured using a motion capture system (13 reflective markers) while they performed an incremental running test. Three captures of each subject were performed at different intensities (45%, 70%, and 85% of HRR (heart rate reserve)) and three morphology groups were made by splitting their thoracic index. The results showed a significant increase in the anteroposterior and mediolateral cross-sections when the intensity of the exercise is also increased. No differences were found in the cross-sections due to the morphology of the thorax. However, subjects with a deeper thorax showed a different behaviour as they increased their anteroposterior cross-section during higher intensities, while flatter thorax subjects did not perform in the same way. This could be explained as compensation for the morphological disadvantage that a deeper ribcage shape suffers when developing endurance efforts. More investigations regarding thorax kinematics are needed for a better understanding of breathing disorders and physical activities.

On multi-stage deformation and gradual energy absorption of 3D printed multi-cell tubes with varying cross-section

Thin-walled structures are widely used in passive safety systems due to their excellent lightweight and controllable progressive deformation performance. While designing to improve the energy absorption performance of thin-walled structures, it is also crucial to consider reducing the damage received by protected objects during accidental collisions. In this work, stepwise and continuous graded multi-cell tubes with varying cross-sections were proposed based on the fused deposition modeling technique to achieve a gradual energy absorption process. Compression responses and energy absorption characteristics of the graded multi-cell tubes were investigated by quasi-static compression tests. Experimental results showed that the stepwise graded multi-cell tubes produced obvious multi-stage deformation and energy absorption during axial compression. The specific energy absorption presented an upward trend with the increased number of stepwise segments. For the same ranges of cross-section variations, continuous graded multi-cell tubes exhibited more plastic hinges and better energy absorption performance due to the absence of discontinuous interfaces. In addition, continuous graded multi-cell tubes showed continuous folding deformation with the gradually decreasing folding wavelength. Thus, it exhibited a steadily increasing trend in crushing force and realized the gradual energy absorption mode.

Characterisation of 3D woven textile composites in presence of minor weft tow undulations and cross-section variations

Characterisation of 3D woven textile composites in presence of minor weft tow undulations and cross-section variations

Aerodynamic study of high-speed railway tunnels with variable cross section utilizing equivalent excavation volume

High-speed railway tunnels, being critical components of transportation infrastructure, are subject to various aerodynamic effects that can impact train operations and passenger comfort. To address these challenges, the concept of tunnels with variable cross sections offers a promising solution, allowing for non-uniform adjustments to tunnel geometry along its length. By employing the notion of equivalent excavation volume, this paper aims to provide a comprehensive aerodynamic analysis of variable cross section tunnels, focusing on different rates of cross section variation (CR). The simulation of high-speed trains (HSTs) passing through tunnels is conducted using the compressible, unsteady Reynolds-Averaged Navier–Stokes model, and the accuracy is confirmed through experimental validation. The transient pressure and peak distribution, slipstream characteristics, micro-pressure waves, and aerodynamic loads acting on trains are fully evaluated. The results indicate that variable cross section tunnels can alleviate the negative pressure on train surface, particularly with streamlined heads and tails exhibiting superior effects, whereas its influence on positive pressure is minimal. The mitigation of both positive and negative pressures on the tunnels is promising, with the maximum peak-to-peak pressures exhibiting a quadratic decrease as the CR increases, resulting in a maximum relief of 17.7%. However, variable cross section tunnels have certain adverse effects on slipstreams and transient loads when HSTs passing through front junctions. Therefore, it is necessary to choose an appropriate CR to control these effects during design process. The findings of this research contribute novel insight for optimizing tunnel design and engineering practices to enhance operational efficiency and passenger comfort.

Failure analysis of 3D woven composites under tension based on realistic model

The failure behavior of the three-dimensional (3D) woven composites under tension are evaluated via experimentation and simulation. To accurately depict the intricate geometry of the woven composites, including the fluctuation of yarn paths, variations in cross-section, and resin distribution, the image-aided digital elements modeling approach is employed. Subsequently, to further assess both the tensile performance and damage response, a realistic voxel model is established with the integration of a well-suited progressive damage model. The obtained stress–strain curves align with the experimental results, and damage progression and underlying mechanisms involved are clearly revealed. Specifically, when subjected to warp tension, severe transverse damage and fiber bundle pull-out towards the warp yarns are observed within the curved section. Similarly, under weft loading, longitudinal damage is found to occur in the weft yarns, while the warp yarns suffer from transverse damage, leading to the formation of a smooth and brittle crack. Ultimately, the findings of this study hold potential to advance the engineering applications of the 3D woven composites.

Effective Stiffness and Damping Analysis of Steel Damper to Lateral Cyclic Loading

Steel dampers are components used in building structures to reduce vibration and energy generated by dynamic loads such as earthquakes. Several factors affect the effectiveness of steel dampers in reducing energy, including the cross-sectional area, mass distribution, cross-sectional geometry, and material stiffness. The cross-sectional geometry or shape of the steel damper can affect how energy is absorbed and dissipated in the structural system. Cross sections with different geometric variations can have different mechanical responses to dynamic loads. This study aims to analyze which type of steel damper is effective in terms of stiffness and damping capacity against lateral cyclic loads. The steel damper cross-sectional variations used are slit steel dampers (SSDs), tapered steel dampers (TSDs), and oval steel dampers (OSDs). Cyclic testing of the dampers used displacement control with the same target deviation for all three damper types. The results showed that the stress and strain distributions of the oval steel damper were more even than those of the other two models. The variations in the energy dissipation capacities of the three cross-section variations are relatively the same. However, the slit steel damper type has the best stiffness compared to the other two types. This research is ultimately expected to influence the science of the structure of a building in preventing and anticipating earthquakes or other disasters. Doi: 10.28991/CEJ-2024-010-07-017 Full Text: PDF

Two-photon laser-induced fluorescence study of the CO B 1Σ+ (v' = 0) state in a 4850K plasma plume: Modified molecular constants, evidence of predissociation, and J'-dependent photoionization.

We report the two-photon absorption laser-induced fluorescence rotational spectrum of the CO B 1Σ+ ← X 1Σ+ Hopfield-Birge system (v' = 0, v″ = 0) Q-branch in an ∼4850K, atmospheric pressure plasma torch plume at thermal equilibrium in both the quenching-dominated (low laser intensity) and photoionization-dominated (high laser intensity) regimes. We provide a detailed analysis of the photophysics in these two regimes using a rate equation approach and propose modeling considerations for them as well. In the experimental spectra, distinct rotational transitions up to J″ = 83 are observed, allowing analysis over a very large range of rotational states. Evidence of predissociation is observed for J' ≥ 64 and is likely due to the interaction with the D'1Σ+ electronic state, which has been proposed in the literature but never observed in the v' = 0 state. The line positions of higher rotational states show disagreement with line positions calculated from molecular constants in the available literature, suggesting the need for modifications to the constants, which are reported here. A shift in the B 1Σ+ ← X 1Σ+ absorption spectrum toward higher two-photon energy as a result of the second-order Stark shift was observed in the photoionization-dominated spectrum, and the second-order Stark shift cross section was estimated to be 7 ± 3 × 10-18 cm2. The mean photoionization cross section of the excited upper state was inferred by comparing the line broadening of the two spectra and was estimated to be 11 ± 7 × 10-18 cm2. In addition, weak J'-dependent variations of the photoionization cross section were observed and are reported here.

A multifractal model for predicting the permeability of dual-porosity media with rough-walled fractures and variable cross-sectional pore channels

The seepage of rock strata is greatly influenced by the pore network and fracture network; however, the prediction of permeability becomes challenging due to the changes in the cross section of pore channels and the morphology of fractures. In this study, a novel pore-fracture permeability model based on a fractal theory is proposed, and the analytical solutions of the model are given. In contrast to the traditional smooth parallel plate and uniform cross section straight capillary, this model not only considers the roughness of the fracture surface, but also the cross section variation and tortuosity of the pore channel. The comparisons between the calculated results and the experimental data verify the reliability of this model. The quantitative analyses of microscopic parameters indicate a positive correlation between the permeability and the fractal dimension, size, and proportion of pores and fractures. Conversely, there is a negative correlation with roughness, tortuosity, and cross-sectional changes. The range in which the seepage contribution of pores cannot be ignored is determined. Two logarithmic relationship expressions for permeability are presented. This study contributes to explore the effects of the geometry and morphology of the pore-fracture media on seepage and supplements the studies on the permeability models.

Scattering properties of dual Bessel beams on chiral layered particle

The paper investigates the scattering analytical solution of arbitrary direction double zero-order Bessel beams (ZOBBs) incident on a non-uniform layered chiral sphere. Using the generalized Lorenz-Mie theory (GLMT), the electromagnetic field expansion expression of the double ZOBBs is obtained through the vector superposition of the spherical vector wave functions (SVWFs). Analytical solutions of the scattering on chiral layered particles by dual Bessel beams are derived based on the boundary condition. The iterative coefficient equations are constructed to obtain the expansion coefficients of the SVWFs in each region of the multi-layer chiral sphere. The variation of radar cross section (RCS) with angular distribution is numerically simulated, and the scattering results of layered chiral spheres degenerated into isotropic layered spheres are compared with the literature, which verifies the correctness of the theory and program. The effects of incident angle, polarization angle, cone angle and chiral parameters on the scattering characteristics of far region and internal field of the layered chiral particle are analyzed in detail. The theory and results can offer significant assistance in studying the optical properties of non-uniform chiral particles and complex biological cells irradiated by multiple beams and may also provide important practical value in the micromanipulation of multi-layered biological structures.

Impact of Single-Melamine Tautomerization on the Excitation of Molecular Vibrations in Inelastic Electron Tunneling Spectroscopy.

Vibrational quanta of melamine and its tautomer are analyzed at the single-molecule level on Cu(100) with inelastic electron tunneling spectroscopy. The on-surface tautomerization gives rise to markedly different low-energy vibrational spectra of the isomers, as evidenced by a shift in mode energies and a variation in inelastic cross sections. Spatially resolved spectroscopy reveals the maximum signal strength on an orbital nodal plane, excluding resonant inelastic tunneling as the mechanism underlying the quantum excitations. Decreasing the probe-molecule separation down to the formation of a chemical bond between the melamine amino group and the Cu apex atom of the tip leads to a quenched vibrational spectrum with different excitation energies. Density functional and electron transport calculations reproduce the experimental findings and show that the shift in the quantum energies applies to internal molecular bending modes. The simulations moreover suggest that the bond formation represents an efficient manner of tautomerizing the molecule.

Stochastic microstructure modeling and thermal conductivity of coal-based carbon foam

The mechanical, thermal and electrical properties and applications of coal-based carbon foam (CCF) are based on its porous structure. In the present study, a 3-D stochastic numerical program was used to model the microstructure of CCF considering its non-uniformly distributed elliptical pores (i.e., pore dispersity). The heuristic program derived from the foaming process reflected the heterogeneity of foam. Stochastic seeding was used to regulate the pore location dispersity caused by material unevenness and impurities, while the pore size dispersity was revealed by assigning dissolved gas to adjacent pores during pore growth. The structural similarity was confirmed by comparison between the established model and the actual foam in geometrical features, including ligament edge/wall thickness, pore size and ligament cross-section shape etc. The effective thermal conductivity (ETC) of the stochastic model is more sensitive to changes in porosity, compared to that of uniform model of previous literatures. The reason was suspected to be the longer heat transfer path and less cross-section variation of the ligaments of heterogeneous foam. Pore location and size dispersities were regulated in a stable range by program parameters, which indicated that the stochastic model accurately simulated the microstructural complexity of CCF.

Correlative algorithm for determining the velocity of hot-rolled rod and wire using Cross-Section variations

Measuring the velocity of hot rod and wire during rolling is crucial for accurate control of rolling stands and blocks. To accomplish this, the velocity should be measured at strategically placed locations throughout the mill. The current state-of-the-art exhibits various techniques and methods for velocity measurement with their respective advantages and disadvantages, whereas measuring devices based on the Laser-Doppler principle are the most widely used.As part of the research and development of an eddy-current based cross-sectional area measurement, we observed variations in the cross-sectional area of rods and wires. These variations should be utilized for developing a correlative method for velocity measurement. Within the scope of this work, the implementation of a measuring system and the development of an algorithm is described. This algorithm has been applied to a real data set and evaluated, while also assessing the impact of influencing factors on the quality and accuracy of calculated rolled material velocity. Finally, it was successfully demonstrated that the developed solution approach works in practice and provides excellent results. Nevertheless, further validation is required and velocity determination needs to be compared with an independent reference to improve accuracy estimation.

Dispersion of artificial tracers in ventilated caves

Artificial CO2 was used as a tracer along ventilated karst conduits to infer airflow and investigate tracer dispersion. In the karst vadose zone, cave ventilation is an efficient mode of transport for heat, gases and aerosols and thus drives the spatial distribution of airborne particles. Modelling this airborne transport requires geometrical and physical parameters of the conduit system, including the cross-sectional areas, the airflow and average air speed, as well as the longitudinal dispersion coefficient which describes the spreading of a solute. Four gauging tests were carried out in one mine (artificial conduit) and two ventilated caves (natural conduits). In this paper, we demonstrate that it is possible to gain reliable airflow rates and geometric information of ventilated karst conduits using CO2 as a tracer. Airflow was gauged along two caves and one mine and compared with punctual measurements made with a hot-wire anemometer. Cross-sectional areas estimated with CO2 tests were compared with those measured in situ. Moreover, breakthrough curve (BTC) analysis displayed an accentuated tailing along the investigated natural conduits due to the presence of dispersive singularities which possibly enable aerosol deposition. The long tailing observed in Milandre and Longeaigue Caves is probably due to cross-section variations. A 1-D advection-dispersion model tested for these sites was unable to fit BTC tailing in natural conduits. In Baulmes artificial conduit, where long tailing is not observed, the dispersion coefficient has been estimated using Chatwin’s method, and compared with the prediction of Taylor’s theory. Despite the regular geometry of Baulmes Mine, Taylor’s correlation significantly underestimates the dispersion coefficient deduced from field data, showing the need for more theoretical work on turbulent dispersion in mines. This paper gives a first insight into air motion and matter dispersion along ventilated karst conduits, preparing for proper aerosol dispersion modelling.

Accounting for trade patterns

We develop a quantitative framework for decomposing trade patterns. We derive price indexes that determine comparative advantage and the aggregate cost of living. If firms and products are imperfect substitutes, we show that these price indexes depend on variety, average appeal (including quality), and the dispersion of appeal-adjusted prices. We show that they are only weakly related to standard empirical measures of average prices. We find that 40 percent of the cross-section variation in comparative advantage, and 90 percent of the time-series variation, is accounted for by variety and average appeal, with less than 10 percent attributed to average prices.

Light dilaton in rare meson decays and extraction of its CP property

The dilaton ϕ is a pseudo-Nambu-Goldstone boson associated with the spontaneous breaking of scale invariance in a nearly conformal theory, and couples to the trace of the stress-energy tensor. We analyze experimental constraints on a light dilaton with mass in the MeV–GeV range from rare meson decays. New model-independent inclusive bounds for the b → sϕ transition largely exclude the parameter space of a light dilaton that could explain the muon g − 2 anomaly. Despite similarities between a dilaton and a Higgs-portal scalar, the dilaton-photon coupling is enhanced compared to the Higgs-portal scalar due to contributions from loops of the conformal sector. Consequently, the shortened lifetime of the dilaton relaxes bounds from K → π + invisible searches at the NA62 experiment and constraints from the Big Bang Nucleosynthesis. We utilize this fact to search for the dilaton signature at a lepton collider such as the ongoing Belle II experiment. Further, we demonstrate how to extract the CP property of the dilaton using the variation of the differential cross-section of e+e− → e+e−ϕ with the azimuthal angle between the outgoing leptons.