Variations In Chemical Composition Research Articles

Detection Strategies for Volatile Fragrance Released from Agricultural Products: Progress and Prospects

AbstractThe volatile aroma released from agricultural products is closely related to the health status and quality of their growth, thus endowing the related detection with great significance. For example, the dynamic variation of the volatile chemical composition of a banana during the growth process can reflect its ripeness. Also important for quality monitoring and storage is to precisely and swiftly identify volatile compounds produced by mildew in rice and wheat. In this endeavor, the current detection technologies such as gas chromatography‐mass spectrometry method (GC‐MS) cannot meet the pressing needs of smart agriculture in terms of real‐time monitoring, cost‐effectiveness, sensitivity, and detection speed, thereby necessitating alternative strategies to simultaneously satisfy these requirements. Aiming to provide an overall development trend in this field, this paper summarizes the existing detection technologies including GC‐MS, E‐nose, and sensory analysis with their respective shortcomings and challenges, and then proposes the application prospects. This work can effectively enrich the reliable monitoring methods for volatile agricultural fragrance while promoting the long‐run development of smart agriculture.

A versatile, rapid Agrobacterium-mediated transient expression system for functional genomics studies in cannabis seedling.

We have developed and optimized a rapid, versatile Agrobacterium-mediated transient expression system for cannabis seedlings that can be used in functional genomics studies of both hemp-type and drug-type cannabis. Cannabis (Cannabis sativa L.) holds great promise in the medical and food industries due to its diverse chemical composition, including specialized cannabinoids. However, the study of key genes involved in various biological processes, including secondary metabolite biosynthesis, has been hampered by the lack of efficient in vivo functional analysis methods. Here, we present a novel, short-cycle, high-efficiency transformation method for cannabis seedlings using Agrobacterium tumefaciens. We used the RUBY reporter system to monitor transformation results without the need for chemical treatments or specialized equipment. Four strains of A. tumefaciens (GV3101, EHA105, LBA4404, and AGL1) were evaluated for transformation efficiency, with LBA4404 and AGL1 showing superior performance. The versatility of the system was further demonstrated by successful transformation with GFP and GUS reporter genes. In addition, syringe infiltration was explored as an alternative to vacuum infiltration, offering simplicity and efficiency for high-throughput applications. Our method allows rapid and efficient in vivo transformation of cannabis seedlings, facilitating large-scale protein expression and high-throughput characterization studies.

Sound velocities in lunar mantle aggregates at simultaneous high pressures and temperatures: Implications for the presence of garnet in the deep lunar interior

Recent experimental and theoretical studies on lunar magma ocean crystallisation have suggested the presence of significant proportions of garnet in the deep lunar interior. While phase relation studies indicate a deep lunar mantle consisting of olivine, pyroxene, and garnet, the compatibility of such an assemblage with seismic models of the lunar interior is yet untested. In this study we report compressional and shear wave velocities in an iron-rich assemblage consisting of olivine, orthopyroxene, clinopyroxene, and garnet up to ∼8 GPa and 1300 K, by means of ultrasonic interferometry measurements combined with synchrotron techniques using the multi-anvil press apparatus. Sound velocity and density models of lunar mantle rocks along a selenotherm based on our experimental results find good agreement with the seismic and density profiles at lunar interior depths of 740–1260 km. Further models are constructed, allowing for the variation of chemical composition, phase proportion, and temperature; these suggest that a garnet-rich deep lunar mantle is compatible with present-day lower lunar mantle temperatures of between 1400–1800 K. Our results show that lunar mantle rocks with up to 33 wt.% garnet may provide an explanation for the observed high velocities of the lower lunar mantle. The presence of garnet in the lowermost part of the Moon's mantle has significant implications for the depth and temperature of the Moon's magma ocean as well as the composition, structure and internal dynamics of the solid Moon.

Annual Variation in Proximate Chemical Composition of Fish Sold in Ludhiana Market: Punjab, India

A study was carried out to investigate the nutritional composition of four different fish species (Wallago attu, Labeo rohita, Pangasianodon hypophthalmus, and Rastrelliger kanagurta) sourced from the inland and marine sector comprising both culture and capture fisheries marketed in Ludhiana fish market from September 2021 to August 2022, encompassing four distinct seasons: post-monsoon, winter, pre-monsoon, and monsoon. The proximate parameters including protein, lipid, carbohydrate, ash and moisture content were analysed following the standard methods. The moisture content across the four species ranged from 72.48% to 81.08% in selected fish. Lowest moisture content was recorded during the pre-monsoon season, contrasting with their highest levels during the monsoon season. Protein levels ranged from 9.72% to 18.36% across different seasons. Specifically, P. hypophthalmus displayed the lowest protein content (9.72±0.18%), while R. kanagurta exhibited the highest (18.36±0.18). W. attu, L. rohita, P. hypophthalmus, and R. kanagurta exhibited their lowest lipid content in flesh during the monsoon season, measuring at 0.69%, 1.59%, 9.33%, and 2.47%, respectively, contrasting with their highest levels during the winter season at 1.07%, 2.05%, 11.04%, and 4.05%, respectively. Across different seasons, carbohydrate content varied from 0.23% to 2.04%. R. kanagurta exhibited the lowest carbohydrate values; while L. rohita displayed the highest. Across different species, ash content varied from 1.62% to 4.34%, with the lowest observed in P. hypophthalmus and the highest in W. attu. Overall in fish muscle, water content reached its peak levels while muscle protein content decreased during the monsoon. The decline in protein and the rise in water content of the muscle were attributed to gonadal development and maturation, which depleted muscle protein reserves during the monsoon season. Inverse relationship between moisture and fat content in fish were observed, suggesting that fatty fish typically exhibit relatively lower moisture content. Lower levels of carbohydrate content are found in the total proximate composition of fish muscle, indicating that most of the glycogen in freshwater fish does not significantly contribute to body reserves.

Nanometer – Thick titanium film as a silicon migration barrier

Diffusion of silicon atoms to the topmost film surface poses significant challenges in various technological applications. In an effort to address this issue, titanium films with varying thicknesses were deposited on a silicon substrate to evaluate the efficacy of a thin titanium barrier film in blocking silicon migration to the upper film surface. Subsequently, the films were subjected to a 1-hour heating process in air at an oxidizing temperature of 430 K. Atomic force microscopy and Raman spectroscopy were employed to characterize the morphological and structural changes among the investigated films. X-ray photoelectron spectroscopy was utilized to explore variations in chemical composition, determine oxidation states, and measure the thicknesses of the thin titanium oxide layers. The findings revealed that titanium films with a thickness < 50 nm experienced silicon diffusion to their upper film surface. Moreover, an increase in the thickness of the oxide layers over the titanium film on the silicon substrate significantly reduced the migration of silicon to the titanium film surface. At 430 K, the study found that oxide layers at least 6.87 nm thick formed on a 35-nm thick titanium layer, which together successfully prevented silicon migration to the top surface of the film.

Coupling structural, chemical composition and stress fluctuations with relaxation dynamics in metallic glasses

Understanding the atomistic mechanisms of relaxation dynamics in metallic glasses remains a longstanding challenge. Here, using microsecond time scale molecular dynamics simulations, three main relaxation stages in metallic glasses are identified. At about 0.6Tg, chemical composition plays a dominant role in the relaxation, manifested by stress accumulation and only minimal variations in structure. As Tg approaches, the confluence of structural heterogeneity and chemical composition leads to the decoupling of relaxation mechanisms. At this temperature, the relaxation results in a structure with a lower energy state and a lower level of stress. In the supercooled liquid regime, an extensive increase in the number of closed-packed icosahedral clusters is responsible for accelerated structural relaxation while their packing frustration leads to the accumulation of intrinsic residual stresses in the glass. The atomistic origin of these dynamic relaxation modes is discussed in terms of structural, chemical composition and stress variations.

Densification of Delignified Wood: Influence of Chemical Composition on Wood Density, Compressive Strength, and Hardness of Eurasian Aspen and Scots Pine

The densification of solid wood is a well-studied technique that aims to increase the strength and hardness of the material by permanently compressing the wood tissue. To optimise the densification process in this study, a pre-treatment with sodium sulphite was used (delignification). With delignification prior to densification, one achieves higher compression ratios and better mechanical properties compared to densification without pre-treatment. The reactivity of syringyl (dominant in hardwoods) and guaiacyl (dominant in softwoods) lignin towards delignification is different. The influences of this difference on the delignification and densification of softwoods and hardwoods need to be investigated. This study aimed to densify wood after delignification and investigate how variations in chemical composition between coniferous and deciduous species affect the densification process. Scots pine and Eurasian aspen specimens with a similar initial density were investigated to study the influence of the different lignin chemistry in softwoods and hardwoods on the densification process. Both timbers were delignified with sodium sulphite and sodium hydroxide and subsequently densified. While the delignification was twice as efficient in aspen than in pine, the compression ratios were almost identical in both species. The Brinell hardness and compressive strength showed a more significant increase in aspen than in Scots pine; however, one exception was the compressive strength in a radial direction, which increased more effectively in Scots pine. Scanning electron microscopy (SEM) revealed the microstructure of densified aspen and Scots pine, showing the crushing and collapse of the cells.

Impact of organic carbon on heavy metals of river sediments and aquatic ecosystems: A review

AbstractOrganic carbon with variable chemical composition sourced primarily from terrestrial and aquatic biogenic input has a significant impact on sediment heavy metal mobility. The present scientific view is unclear in deciphering the role of labile organic carbon in changing sediment heavy metal concentration. The present review critically assesses the impact of various forms of carbon on different geochemically bound heavy metal fractions and their monitoring. It is evident from the review that, the biochemical form of organic carbon (based on degradability and biopolymeric forms), carbon‐geochemical association, and density of organic carbon (light or heavy carbon fractions) plays an important role in determining the bioavailability and toxicity of metals for aquatic organisms. Besides the organic carbon, various sediment conditions that define the behavior of heavy metals include pH, redox condition, sulfide concentration, salinity, temperature, etc. Therefore, it is recommended that carbon relation with heavy metal mobility and stability should be included under long‐term sediment management plans to maintain the sediment quality of the river system.

Compositional alteration of low dimensional nickel sulfides under hydrogen evolution reaction conditions in alkaline media

Developing cost-effective electrodes for electrochemical water splitting with minimal kinetic losses remains a primary challenge in water electrolysis. Nickel-based dichalcogenides, particularly sulfides, have emerged as promising candidates for the hydrogen evolution reaction (HER). However, the stability of various nickel sulfide (NixSy) phases under cathodic potentials in alkaline electrolytes is subject to debate. In this study, we investigate the HER activity and durability of both 2-dimensional (2D) and 3-dimensional (3D) NixSy nanostructures with diverse chemical compositions. Through cross-correlation analysis of spectroscopic and electrochemical characterization data, we elucidate the transformation behavior of these materials under operating conditions. Our findings reveal that NiS2 tends to undergo conversion to nickel hydroxide (Ni(OH)2), while Ni-rich phases like Ni3S4 and NiS exhibit greater stability. Furthermore, we demonstrate that in 3D nanostructures, the initial formation of a protective hydroxide layer on the surface inhibits further sulfide transformation. This nickel sulfide/hydroxide composite shows an improved HER activity with lower onset potential (−0.25 V), Tafel slope (105 mV s−1), and charge transfer resistance (17.3 Ω).

Temperature and pressure-induced excitation-dependent emissions in zero-dimensional hybrid metal halides with mixed halogens.

Zero-dimensional (0D) hybrid metal halides (HMHs) have emerged as a promising platform for exploring excitation-dependent multicolor luminescent materials owing to their diverse crystal structures and chemical compositions. Nevertheless, understanding the mechanism behind excitation-dependent emissions (EDEs) in 0D HMHs and achieving precise modulation remains challenging. In this work, the delicate regulations on the EDE of 0D (DMEDABr)4SnBr3I3 (DMEDA: N, N'-dimethylethylenediamine) with mixed halogens are achieved under low temperature and high pressure, respectively. The inhomogeneous halogen occupation at the atomic scale leads to the formation of Br-rich and I-rich SnX6 (X = Br, I) octahedra, which act as distinct luminescent centers upon photoexcitation. At low temperatures, the narrowed photoluminescence spectra could distinguish the individual emissions from different luminescent centers, resulting in a pronounced EDE of (DMEDABr)4SnBr3I3. In addition, the contraction and distortion of the luminescent SnX6 (X = Br, I) centers at high pressure further result in different degrees of emission shifts, giving rise to the gradual emergence and disappearance of EDE. This work elucidates the underlying mechanism of EDE in 0D HMHs and highlights the crucial role of halogens in determining the optical properties of metal halides.

Chemical composition and bioactivity variability of two-step extracts derived from traditional and “QiNan” agarwood (Aquilaria spp.)

One of the primary applications for agarwood lies in the extracts, instead, there are obvious differences in the demands for agarwood components with different application fields. To obtain the rough separation and clarify each part's activity, four extracts of essential oil, hydrolat, extractum, and ethanol precipitation from traditional agarwood (TraA) and “Qinan” agarwood (QinA) were obtained by steam-solvent multistage extraction and ethanol precipitation. We investigated the chemistry and biological activity of multistage extracts using gas chromatography–mass spectrometry (GC–MS), high-performance liquid chromatography (HPLC), and in vitro activity testing. The results demonstrated that two kinds of agarwood essential oils contained mainly sesquiterpenoids, yet the sesquiterpene species were remarkably diverse in two kinds of agarwood essential oils. Then, the TraA and QinA hydrolat, all predominantly aromatic and sesquiterpene, but with differences from the essential oil ingredients. Additionally, the extractum chiefly contained chromones and the ethanol precipitation method worked well to separate the impurities in the TraA extract, however, it was ineffective for the QinA extract. Ultimately, essential oils and extractums all have antioxidant properties, with extractums outperforming essential oils. Moreover, both extractums and essential oils exhibited excellent broad-spectrum antimicrobial activity and anti-inflammatory activity. The findings pointed to the feasibility of separating the primary components from TraA and QinA using a multi-stage extraction technique, providing a scientific basis for the efficient utilization of all components of agarwood, as well as the functional product development and differentiated utilization of extract products in incense, fragrance, perfume, and daily chemicals.

Metallographic Etching of Al–Mg–Zn–(Cu) Crossover Alloys

Various alloys demand customized etchants due to their diverse chemical compositions, particularly in the realm of aluminum alloys. Consequently, in this study, a technique is proposed for metallographic visualization of small grain structures within Al–Mg–Zn–(Cu) crossover alloys. In this method, a thermal pretreatment combined with an etching process is relied on. In the study, it is primarily sought to comprehend how grain‐boundary precipitation affects etchability, addressing the complexities of characterizing these alloys. The demonstrated approach facilitates the swift assessment of grain sizes &lt;10 μm using light optical microscopy. Exploring the etchability of Al–Mg–Zn–(Cu) crossover alloys across a standard heat‐treatment pathway identifies the optimal treatment and suitable etchant for grain visualization. Through process refinement, a reduction in processing time is achieved by employing a single‐step preheat treatment lasting 20 min at 180 °C post solution annealing. Transmission electron microscope analysis reveals continuous occupancy of the grain boundary with T‐phase as the key factor influencing the alloy's etchability. Grain size assessment involves line intercept counting and equivalent circle diameter measurement for precise characterization.

Exploring the potential of fennel (&lt;i&gt;Foeniculum vulgare&lt;/i&gt; Mill.) as a valuable medicinal plant: a comprehensive (review)

Introduction. Foeniculum vulgare Mill., commonly known as fennel or drugstore dill, is very common as one of the world's oldest spice plants, which has significant economic importance and wide application in the pharmaceutical industry. In medical practice, the fruits of this plant are mainly used, which are included in the State Pharmacopoeia of the XIV edition and are a source of essential oil. They are used as an antispasmodic and carminative agent in the form of an infusion. Fennel grass harvested before flowering is used for food, as well as fruits, stems and inflorescences of the plant as a seasoning.Text. The purpose of this study is to summarize scientific papers on the morphological characteristics, phytochemical compounds, therapeutic properties and basic mechanisms of pharmacological activity of F. vulgare. A systematic literature search was conducted using relevant keywords such as "fennel", "Foeniculum vulgare Mill.", "therapeutic" and "pharmacology" in well-known databases, including ScienceDirect, Scopus, EBSCO and Medline. The search covered articles published before April 25, 2023 in available journals. The results of the study showed that fennel has a wide range of pharmacological properties, including antioxidant, anti-cancer, anti-inflammatory, antifungal, antibacterial and estrogenic effects. These effects can be explained by the presence of aromatic compounds, in particular anethole, estragole and fenchone, which are abundantly present in fennel.Conclusion. The diverse pharmacological properties and rich chemical composition of fennel make it a promising raw material for the development of new medicines. Further study of the therapeutic potential of fennel through in vivo and in vitro studies will contribute to the establishment of mechanisms of pharmacological action of biologically active substances (BAS) of fennel.

Analysis of Chemical, Microstructural and Mechanical Properties of a CuAlBe Material Regarding Its Role as a Non-Sparking Material.

We developed and analyzed a novel non-sparking material based on CuAlBe for applications in potentially explosive environments. Using a master alloy of CuBe, an established material for anti-sparking tools used in oil fields, mines, or areas with potentially explosive gas accumulations, and pure Al, we used an Ar atmosphere induction furnace to obtain an alloy with ~10 wt% Al and ~2 wt% Be percentages and good chemical and structural homogeneity. The new material was tested in an explosive gaseous mixture (10% H2 or 6.5% CH4) under extremely strong wear for 16,000 cycles, and no hot sparks capable of igniting the environment were produced. The material was used in the form of hot-rolled plates obtained from melted ingots. The experimental results reflect the use of a suitable material for non-sparking tools. This material has good deformability during hot rolling, abnormal grain growth during deformation under heat treatment and special thermo-mechanical processing, and no high chemical composition variation. Additionally, there are slightly different corrosion resistance and mechanical properties between the melt and hot-rolled state of CuAlBe material. Through hot rolling, the material's corrosion resistance increased, reducing the chances of generating sparks capable of causing explosions.

Volatility and chemical composition of secondary organic aerosol derived from acenaphthylene and acenaphthene under various oxidant conditions

Acenaphthene (ACE) and acenaphthylene (ACY), distinguished by their unique structures, exhibit high reactivity among polycyclic aromatic hydrocarbons (PAHs). Particularly, the rapid ozonolysis of the carbon-carbon double bond in ACY and the swift oxidation of the fused cyclopenta ring in both ACE and ACY by NO3 underscore their distinct atmospheric fate. Through the utilization of a thermo denuder and high-resolution mass spectrometry, the chemical composition and volatility of four types of secondary organic aerosols (SOA) derived from ACE and ACY are investigated. The chemical composition of SOA formed by ACY ozonolysis is characterized by low O: C ratios and high unsaturation, suggesting the retention of aromatic structures. This leads to measured high SOA volatility and is consistent with the low reactivity of O3 with aromatic compounds. In contrast to ozonolysis, the reaction of NO3 with ACY could yield SOA with very low volatility, characterized by abundant dimers and highly oxidized products. Furthermore, the prevalence of compounds with 11 carbon atoms suggests the presence of complex mechanisms in the ACY oxidation process initiated by NO3, where dealkylation reactions and cleavage reactions may be pivotal. The diverse chemical composition and volatility of SOA from ACE and ACY reacting with NO3 radicals highlight the substantial impact of precursor structure on SOA chemical composition, particularly concerning the presence of active carbon-carbon double bonds. The higher O: C ratio of SOA from OH-initiated oxidation of ACE indicates the significant role of OH in the oxidation of PAHs. These findings offer valuable insights into the atmospheric fate of these PAHs, underscoring the necessity for a comprehensive understanding of their degradation processes and the formation of SOA.

Topological indices & Hirshfeld pseudo-surfaces synergy to understand the radiation attenuation in materials: Case of study spinel mineral crystals

The present work deals with the radiation attenuation characteristics of spinel minerals, a unique class of minerals with diverse crystalline structures and chemical compositions. We analyze the MAC and LAC in various photon energy spectrum using XCOM and Phys-X software tools. In addition to traditional methods, we employ topological indices (TIs) and Hirshfeld pseudo-surfaces (HPSs) to explore the atomic interactions and electron density distributions within these minerals to pinpointed their effects on the on these γ-radiation attenuation coefficients. Our findings reveal that MAC values decrease with increasing photon energy, a trend observed across all studied spinel minerals. The use of the HPSs provides visual insights into electron density distributions and intermolecular interactions mastered by 2D fingerprints which are correlated with the γ-attenuation of these spinels crystal. Linear regression correlations between TIs and MAC, LAC values demonstrate strong relationships, with the first Zagreb coindex and the Forgotten Index (F-index) emerging as reliable predictors of γ-rays radiations shield properties.

Influence of Varied Silane Commercial Brands and Adhesive Application on Bond Strength and Stability to Lithium Disilicate Glass Ceramic.

This study aimed to evaluate the impact of various commercial silane brands with varied chemical compositions with or without the application of an adhesive layer on the microshear bond strength and durability of a resin luting agent to lithium disilicate glass ceramic. Lithium disilicate glass ceramic discs (EMX, IPS e.max Press, Ivoclar Vivadent) measuring 10 mm in diameter and 3 mm in thickness were fabricated (n=240). Surfaces were etched using 5% hydrofluoric acid and randomly assigned to 10 groups based on the commercial brand of silane used (n=24): [RP] RelyX Ceramic Primer (3M ESPE); [PS] Prosil (FGM); [SA] Silano (Angelus); [SM] Silano (Maquira); [SU] Silane (Ultradent); [GL] GLUMA Ceramic Primer (Kulzer); [CB] Ceramic Bond (VOCO); [MB] Monobond N (Ivoclar Vivadent); [CP] Clearfil Ceramic Primer (Kuraray); and [DE] 2-step silane (Dentsply Sirona). Half of the EMXs (n=12) received a thin adhesive layer (+) after the silane and prior to resin luting agent, while the other half (n=12) did not receive an adhesive layer (-). For the microshear bond strength test (μSBS), four light-cured resin luting agent cylinders (1 mm in diameter) were created on each EMX surface. Half of these specimens were tested after 24 hours, while the other half were stored in deionized water for 6 months. The μSBS test was conducted using a universal testing machine (DL 500, EMIC) at a crosshead speed of 1 mm/min until failure. The obtained data underwent statistical analysis using analysis of variance (ANOVA) and the Tukey test (α=0.05). There was significant influence of the silane commercial brand on bond strength. Notably, "universal primers" yielded lower bond strength results compared to "pure" silane solutions. Water storage had a detrimental effect on microshear bond strength for certain silane commercial brands. Additionally, the application of an adhesive layer negatively impacted bond strength results for all silanes. This study confirms the importance of both silane commercial brand and chemical composition in relation to bond strength of resin luting agents to lithium disilicate glass ceramic. Furthermore, the application of an adhesive layer may have an adverse effect on bond stability over time.

ОЦЕНКА ПЕРСПЕКТИВ ИСПОЛЬЗОВАНИЯ СЫРЬЯ ТАВОЛГИ В ФАРМАЦИИ И МЕДИЦИНЕ

An analysis of the scientific literature has shown a significant interest of researchers around the world in the study of medicinal plant raw materials and new sources of herbal preparations of various pharmacological effects. One of such promising objects is the vyazolistnaya meadowsweet or labaznik, an unpretentious plant widely distributed on the territory of the Russian Federation. Due to its diverse chemical composition, labaznik has a wide range of properties necessary for the manufacture of various drugs with high pharmacological activity. The main group of biologically active substances of meadowsweet are phenolic compounds. The essential oil has noticeable antimicrobial and antifunginal activity. Today, being a pharmacopoeial plant in the Republic of Belarus, France and the United Kingdom, in the Russian Federation, meadowsweet does not have the appropriate regulatory documentation, which makes it difficult to use this plant as a source of medicines. In addition, the presence of a number of dietary supplements on the pharmaceutical market, which include different types of raw materials of meadowsweet, also requires the availability of appropriate regulatory documents. The pharmacological activity of different types of raw materials has been confirmed in a significant number of studies by scientists from different countries, however, the plant is still of interest for further testing, especially in the Russian Federation for the formation of regulatory documentation. In this article, the authors conducted a systematic analysis of scientific research on the pharmacological activity of various types of raw materials of the labasnik and assessed the prospects for its use in Russian pharmaceutical practice.

Significant changes in the physicochemical properties of BC-containing particles during the cold season in Beijing

The ambient air quality has improved significantly under strict emission controls in Beijing, China over the last decade. Black carbon (BC), as a short-lived climate forcer in ambient aerosols, profoundly impacts the air quality and climate. Previous studies have demonstrated a decline in the mass concentration of BC. In this study, we characterized the chemical compositions and size distributions of BC-containing particles during the cold season of 2022 in Beijing using state-of-the-art instruments capable of exclusively measuring BC-containing particles. The optical properties of BC-containing particles were further calculated based on the Mie theory. Moreover, we compared the properties of BC-containing particles in 2022 with the results of previous studies. The results showed that the diameters of BC cores became larger while the coating thickness of BC-containing particles became thinner in 2022. For the coating materials, the mass fraction of nitrate increased obviously, and even replaced organic matter as the dominant component during the peak of the pollution period. Variations in chemical compositions and size distributions resulted in lower mass absorption cross-sections (MAC) of BC-containing particles from 10.5 ± 1.1 m2/g in 2016 to 7.3 ± 0.8 m2/g in 2022, reduced by 30.5%. Our results demonstrate the synergistic benefits of air pollution control in improving air quality and mitigating climate change. Therefore, the MAC of BC adopted in climate models should vary with the changing air pollution levels. This study emphasizes that it is imperative to conduct long-term observations of BC-containing particles to better estimate BC's climate effects.

Characteristic, source apportionment and effect of photochemical loss of ambient VOCs in an emerging megacity of Central China

During the transportation from emission sources to sampling site, volatile organic compounds (VOCs) undergo photochemical losses which have significant effects for tropospheric ozone (O3) formation and VOCs source apportionment. In this study, based on hourly speciated VOC data from May 23, to July 8, 2019 with high O3 concentrations, the concentration level, chemical composition, and diurnal variation of observed VOCs were studied, and the initial concentration of VOCs was obtained by combining the local emission inventory in Zhengzhou, Central China. The impact of photochemical loss on source apportionment was evaluated using the Positive Matrix Factorization/Multilinear Engine 2-Species Ratio (PMF/ME2-SR) model based on observed and initial VOCs concentration (OC-PMF and IC-PMF). Results suggest that during the observed period, the average concentration of total VOCs (TVOCs) was 23.74 ± 9.20 ppbv, and alkanes (3.92 ± 2.40 ppbv) were the predominant component. The photochemical losses of TVOCs were approximately 10.15 ± 7.13 ppbv, with an average loss rate of 29.9%. The ozone formation potential (OFP) based on the initial VOCs concentration was 2.2 times higher than that observed VOCs concentration. Alkenes contributed the most to OFP and were also the largest contributors to photochemical losses. TVOC concentrations increased by 5.0% during O3 pollution compared to non-O3 pollution. Seven sources of VOCs were determined, including biomass burning, liquefied petroleum gas (LPG), vehicle emission, industrial emission, solvent usage, gasoline evaporation, and biogenic emission. Compared to the results of IC-PMF, the contributions of these sources in OC-PMF were underestimated by 15.4%, 14.4%, 13.0%, 11.7%, 31.5%, 7.6%, and 4.7%, respectively. This study still exhibits certain limitations in calculation method, and further exploration can be conducted in the future.