The methanol transformation reaction in the presence of oxygen was carried out in the temperature range of 210–310 ºC, over vanadium catalysts based on vanadium oxide (V2O5) and on vanadium-phosphorus oxide (VPO) calcined at 450 ºC in air. Specifically, the vanadium oxide systems with V2O5 loadings below, above or corresponding to the theoretical monolayer (1–34 wt% of V2O5) were obtained by the impregnation of a mesoporous amorphous aluminum phosphate, AlPO4, calcined at different temperatures (from 350 ºC to 650 ºC) with vanadyl oxalate. Additionally, mechanical mixtures of either VPO or V2O5 with AlPO4 were also employed. Under the experimental conditions employed, with a methanol enriched feed (O2/methanol molar ratio=0.6), formaldehyde and dimethoxymethane were the main products obtained with all the catalysts studied. Vanadyl phosphate (VPO) exhibited slightly lower activity than vanadium oxide, formaldehyde being the main product (SFA ≥ 95%). The conversion of both vanadium oxide and vanadyl phosphate appreciably increased when mixed with the AlPO4, also promoting the formation of dimethoxymethane. The interaction of the vanadium species with the aluminum phosphate surface took place preferentially through the surface Al-OH groups, the vanadium species with less development being the most active in the formation of formaldehyde and dimethoxymethane, per at-g of vanadium.