Peak Viscosity Values Research Articles

Differences in physicochemical properties and structure of red sorghum starch: Effect of germination treatments

AbstractBackground and ObjectivesGermination has been extensively studied, but the changes in different starch components have not yet been entirely elucidated. The aim of this study was to assess the effects of germination on the starch composition, physicochemical properties, and structure of red sorghum seeds.FindingsGermination of red sorghum starch led to decreased amylose, water absorption, and syneresis, but increased oil absorption, solubility, and swelling power. The freeze–thaw stability of germinated sorghum starch improved. However, the starch paste exhibited thinning under shear, suggesting its gel structure was susceptible to damage. The starch's peak viscosity and breakdown value increased significantly with the increase in germination time, whereas the setback value decreased. Germination treatment did not alter the chemical structure of the starch, but it increased the porosity and the number of dents on the surface of starch granules. Notably, the in vitro digestibility of the starch increased significantly after germination.ConclusionsThe germination treatment of red sorghum affected the structure and physicochemical properties of the isolated starch to some extent.

Application of Silica Nanoparticles Improved the Growth, Yield, and Grain Quality of Two Salt-Tolerant Rice Varieties under Saline Irrigation.

Salt stress significantly reduces rice yield and quality and is a global challenge, especially in arid and semi-arid regions with limited freshwater resources. The present study was therefore conducted to examine the potential of silica nanoparticles (SiO2 NPs) in mitigating the adverse effects of saline irrigation water in salt-tolerant rice. Two salt-tolerant rice varieties, i.e., Y liangyou 957 (YLY957) and Jingliangyou 534 (JLY534), were irrigated with 0.6% salt solution to simulate high-salt stress and two SiO2 NPs were applied, i.e., control (CK) and SiO2 NPs (15 kg hm-2). The results demonstrated that the application of SiO2 NPs increased, by 33.3% and 23.3%, the yield of YLY957 and JLY534, respectively, compared with CK, which was primarily attributed to an increase in the number of grains per panicle and the grain-filling rate. Furthermore, the application of SiO2 NPs resulted in a notable enhancement in the chlorophyll content, leaf area index, and dry matter accumulation, accompanied by a pronounced stimulation of root system growth and development. Additionally, the SiO2 NPs also improved the antioxidant enzyme activities, i.e., superoxide dismutase, peroxidase, and catalase activity and reduced the malondialdehyde content. The SiO2 NPs treatment effectively improved the processing quality, appearance quality, and taste quality of the rice. Furthermore, the SiO2 NPs resulted in improvements to the rapid viscosity analyzer (RVA) pasting profile, including an increase in peak viscosity and breakdown values and a reduction in setback viscosity. The application of SiO2 NPs also resulted in a reduction in crystallinity and pasting temperature owing to a reduction in the proportion of B2 + B3 amylopectin chains. Overall, the application of silica nanoparticles improved the quality of rice yield under high-salt stress.

Influence of different hydrocolloids on the pasting, rheological, and morphological characteristics of heat gelatinized cassava starch

Heat-gelatinized starch (HGS), which is prepared via heat treatment, enhances viscosity and provides suitable thickening properties, which improve water retention in products. This study aimed to investigate the potential of blending gelatinized starch with edible hydrocolloids (guar gum, carrageenan (C), locust bean gum, konjac powder, and sodium alginate) to assess their effect on the stabilization of starch gelatinization and reduction of retrogradation. Optical microscopic observations revealed the disrupted structures of gelatinized starch after heat treatments, along with diminished or absent birefringence. Adding C to the gelatinized starch reduced its peak viscosity, breakdown and setback value. For the rheological analysis, heat gelatinization and hydrocolloid addition contributed to the increased elasticity and viscosity of samples. Gelatinization and hydrocolloid addition emerged as effective strategies for improving starch quality. Although it still warrants further exploration, the introduced approach holds potential for applications in the development of convenience and canned food products.

Penalties in Granule Size Distribution and Viscosity Parameters of Starch Caused by Lodging in Winter Wheat

Granule size distribution of wheat starch is an important characteristic that could affect the functionality of wheat (Triticum aestivum L.) products. Lodging is a major limiting factor for wheat production. Few studies have been conducted to clarify how lodging influences the granule size distribution and viscosity parameters of starch in wheat grains. Two growing seasons, two high-yield winter wheat cultivars, and five artificial lodging treatments were imposed. The results indicated that lodging significantly reduced the content of starch and increased that of protein. Additionally, lodging caused a marked drop in both starch and protein yields. The relative loss of grain yield, starch yield, harvest index, and protein yield all differed remarkably among lodging treatments with a ranking of L2 > L1 > L4 > L3. Lodging also led to a reduction in the proportion (both by volume and by surface area) of B-type granules and a corresponding increase in that of A-type granules, and the more serious the lodging degree, the greater effect on the changes in these proportions. The smaller starch granules predominated in number, even though their collective contribution to the overall volume is was relatively minor. Meanwhile, it was found that the peak viscosity, hold viscosity, final viscosity, breakdown viscosity, and rebound value of wheat starch were significantly decreased by lodging. Correlation analysis showed that the peak and final viscosities were negatively correlated with volume percentages of A-type starch granules, but were positively correlated with B-type granules. This indicates that B-type granules have higher peak and final viscosities compared with A-type granules in wheat kernels. Lodging can reduce the proportion of B-type starch granules, and thus reduce the peak and the final viscosity in wheat grain.

Effects of Eucommia ulmoides leaf powder on the gelatinization, rheology, and gel properties of sweet potato starch

This study aimed to explore the feasibility of employing Eucommia ulmoides leaf powder (ELP), which is a novel medicinal and food homologous material, to improve the physicochemical properties of sweet potato starch (SPS) gel. The effects of ELP on the gelatinization, rheology, and gel properties of SPS were investigated. The Brabander viscosity test results showed that ELP could reduce the peak viscosity, trough viscosity, final viscosity, and setback value of SPS. The rheological tests showed that the SPS-ELP gels had shear-thinning behavior, and that the ELP could decrease the apparent viscosity, shear stress, G′, G″ of SPS-ELP gels and make the gels exhibit stronger liquid-like behavior. The X-ray diffraction pattern indicated that the ELP could decrease the relative crystallinity and retard retrogradation of SPS-ELP gels, which was cofirmed by microscopic structure analysis. The ELP had a significant effect on the color difference of the gels, resulting in a yellow-green color. The addition of ELP also reduced the hardness of SPS-ELP gels, and increased the median particle size D50, volume mean diameter D [4,3], and area mean diameter D [3,2] of gel particle size distribution. These findings suggest that ELP has a good potential in improving starch gel properties.

Effect of Cyperus esculentus polysaccharide on Cyperus esculentus starch: Pasting, rheology and in vitro digestibility

This study investigated the effects of varying amounts of added Cyperus esculentus polysaccharide (CEP) on the physicochemical and structural properties, as well as in vitro digestibility, of homologous Cyperus esculentus starch (CES). Compared to CES, the CES-CEP complexes showed reduced peak viscosity and breakdown value, and improved thermal paste stability of starch. Rheological properties showed that adding CEP reduced the consistency coefficient and pseudoelasticity of the complexes, thus increasing their resistance to shear thinning. FTIR analysis suggested the absence of covalent binding between CES and CEP. SEM showed a more homogeneous and dense gel structure, particularly in the CES-1.0%CEP sample. During in vitro digestion, the content of resistant starch in the complexes increased after CEP was added. Analysis of the interaction forces showed that the CES-CEP complexes had stronger hydrogen bonding and electrostatic interaction. This study offers valuable insights into the potential applications of CEP in starch-based foods.

Incorporation of intermediate wheatgrass (Thinopyrum intermedium) into bread wheat doughs: Effects on pasting and rheological properties

AbstractBackground and ObjectivesIntermediate wheatgrass (IWG), a resilient perennial grain with adaptability to difficult climates, is emerging as a compelling candidate for sustainable food solutions in bakery product applications. This study evaluated the pasting and rheological properties of doughs made from bread wheat flour and blended bread wheat–IWG flours (IWG content: 15%, 30%, 45% and 60%), with the goal of exploring the potential of IWG flour as a nutritious and sustainable ingredient in cereal‐based products.FindingsThe RVA peak, trough, and final viscosity values significantly (p < .05) decreased, and the pasting temperature increased as the IWG substitution level increased. IWG‐containing flour blends had a lower retrogradation tendency compared to the control. As the IWG flour substitution level increased, both empirical (Mixograph, Kieffer dough and gluten extensibility, Glutograph) and fundamental (linear oscillatory frequency sweep and creep–recovery) rheological measurements indicated relatively weaker dough properties imparted by the addition of the IWG flour.ConclusionsThe outcomes of this research will shed light on the impacts of utilizing alternative grains, such as intermediate wheatgrass, in bakery applications. This will provide insights that could inform the development of nutritious and sustainable baked products to meet the demands of health‐conscious consumers.Significance and NoveltyThe dough weakening effect of the IWG flour was tolerated at the 15% IWG flour substitution level. At lower substitution levels, the IWG‐containing flour blends exhibited a lower retrogradation tendency compared to bread wheat flour, which could indicate lower staling of loaves of bread during bread storage without compromising the physical quality of bakery products. Finally, the present research fills a critical gap in the literature as it represents the first application of fundamental rheological methods at known and controlled strain and stresses to evaluate the physical properties of doughs prepared from IWG flour blends.

Effect of Ginger and Garlic Inclusion on the Performance of Lactobacillus plantarum in Maize (Zea mays l.) Fermentation into Ogi

Maize grains undergo different indigenous processes involving various microbes (Lactic acid bacteria and yeasts) in order to be converted into intermediate and finished products during the process of fermentation. This study was conducted to evaluate the effect of ginger and garlic inclusion on the performance of Lactobacillus plantarum as a single starter in the fermentation of maize into ogi. Ginger and garlic powders were prepared and added to the maize ogi slurry at different percentages as follows: M100 (100% maize ogi), MGG90 (90% maize ogi + 5% ginger+ 5% garlic), MGG80 (80% maize ogi + 15% ginger + 5% garlic), MGG70 (70% maize ogi + 25% ginger + 5% garlic), which was subsequently fermented, dried to flour and then packaged in zip-lock bags. The total viable miicrobial count, pH and total titratable acidity were carried out on the samples during fermentation, while the proximate composition, mineral content, antioxidant properties, functional properties, pasting properties, colour analysis and sensory parameters of the samples were analyzed using standard methods. The results showed corresponding decrease of pH in the spiced ogi slurry as total titratable acidity increased during 48 h fermentation. The results revealed that spiced maize ogi had high protein content (20.12 ± 0.60% for MGG80), fiber (1.11 ± 0.09 % for MGG70), fat (7.15 ± 0.012% for MGG70) and ash content (0.505 ± 0.008% for MGG70). Minerals like calcium, potassium, sodium, phosphorous, iron and zinc were present in all the samples. The antioxidant properties increased with the addition of ginger and garlic. The bulk density ranged from (0.55- 0.667 g/ml) while sample M100 recorded the highest swelling capacity. Pasting properties showed varying peak viscosity, breakdown and setback values. Sensory analysis showed that sample M100 was the most preferred sample. The study established that the inclusion of ginger and garlic in maize ogi positively influenced the performance of Lactobacillus plantarum during fermentation, leading to alterations in microbial dynamics and improvements in nutritional properties of maize ogi.

Almond flour a by‐product of oil extraction: nutritional characterisation and impact on rheological properties of premixes for bakery products

SummaryThe press cake of almond oil extraction contains macro‐ and micronutrients of high nutritional quality. From the milling of this press cake, almond flour (AF) is obtained. The objectives of this work were to evaluate the nutritional and techno‐functional properties of AF and the impact of AF (10%, 20% and 30%) addition on rheological and techno‐functional properties of wheat flour, and maize and potato starches. AF presented a high level of lipids (43.56%), oleic acid being the major one. However, AF presented a long estimated shelf life (18 months). Also, AF was a good source of Mg, P, Cu, Fe, Mn and Zn. Moreover, AF added to wheat flour reduced water absorption and dough farinograph stability. Besides, AF caused a reduction of starch swelling and retrogradation, evidenced by lower peak viscosity and setback values in the viscoamylograph curves of wheat flour; maize and potato starches. This study showed the potential impact of AF use for the development of new bakery products.

Shading at the Booting Stage Improved the Grain Quality of Hybrid Rice Due to Reduced Spikelet Production

As a growing abiotic stress, light deficient conditions seriously affect the yield and quality of rice. However, few studies focus on the effects of shading on grain quality at the booting stage and the responses of different hybrid rice cultivars to shading. Field experiments involving four representative rice (Oryza sativa L.) cultivars across no shading (CK) and 40% shading at the booting (S) and grain filling stages (SS) were conducted in 2021 and 2022. Compared with CK, S reduced grain yield by 53.0% but increased the head rice rate by 11.4% averaged across varieties and years. The chalkiness degree (CD) and chalky grain percentage (CR) were reduced by 73.0% and 61.6% in S due to its 45.3% lower total spikelets m–2, 44.0% lower grain–leaf ratio and 23.5% lower dry weight spikelet production efficiency, compared with CK. The CD and CR in SS were 49.5% and 41.0% higher and HR was 7.1% lower than that in CK. Shading significantly reduced amylose content, peak viscosity and breakdown value, but increased protein content and setback value, and the effects of SS were greater than S. Y-liangyou900 and Liangyoupeijiu showed better milling quality, while Y-liangyou900 and Chuanyou6203 obtained a better appearance and eating quality than the other varieties under both S and SS. In conclusion, shading at the booting stage significantly improved the milling, appearance and nutritional quality, and did not reduce the cooking and eating quality, but led to a significant decline in the grain yield of hybrid rice. Moreover, Y-liangyou900 exhibited better rice quality but lower yield under shading treatments. Therefore, more attention needs to be focused on screening shade-tolerant varieties using both yield and quality to cope with climate change in the future.

Characterization of Starch from Jinicuil (Inga jinicuil) Seeds and Its Evaluation as Wall Material in Spray Drying

Jinicuil seed starch (JSS) was partially characterized and then evaluated as wall material. JSS showed higher content of proteins, lipids, and resistant starch than commercial corn starch (CCS). JSS granules presented both oval-spherical shapes and heterogeneous sizes (~1–40 µm) and exhibited a crystallinity lower than CCS with an A-type X-ray diffraction pattern. Both gelatinization peak and final viscosity values in the pasting profile were higher in JSS than in CCS. At 90 °C, the water solubility was 22% and the swelling power was 17 g g−1. Under refrigeration and freeze-thaw, the JSS gel showed high stability. JSS showed a significant presence of protein and small particles; therefore, it was evaluated as wall material in spray drying. The results showed the formation of spherical aggregates and encapsulation efficiencies of L-ascorbic acid of 14.97–81.84%, with process yields of 19.96–27.64%, under the conditions evaluated. JSS has a potential application in the food industry but also as wall material for microencapsulation by spray drying.

Formulation, Nutritional and Sensory Evaluation of Mocaf (Modified Cassava Flour) Noodles with Latoh (Caulerpa lentillifera) Addition

Instant noodles gained widespread popularity, resulting in a surge in global wheat consumption. However, concerns about the health implications of wheat-based products spurred the need for alternative ingredients in noodle production. The substitution of wheat flour with local resources, such as mocaf flour, and the enrichment of noodles with latoh (Caulerpa lentillifera), provided an opportunity to reduce wheat imports while enhancing the quality and potential health benefits of noodles. This study aimed to determine the optimal formulation, assess the characteristics, and evaluate the functional properties of wheat noodles that were substituted with mocaf flour and supplemented with latoh. The formulation of these noodles was conducted using design expert. The research encompassed a comprehensive analysis of physical, chemical, and organoleptic properties. The presence of latoh, in terms of chemical characteristics, increased the water and protein content in the noodles. On the physical side, it increased the final viscosity, setback, peak time, and elongation, as well as reduced the peak viscosity and breakdown. Meanwhile, the presence of mocaf increased carbohydrate content, peak viscosity, and breakdown value. The variations in noodle formulas only affected consumer acceptance of the appearance of the noodles; the noodle formula 99:1 (Mocaf:Latoh) had the most preferred appearance. Based on the sensory test parameters, the elongation value, and the tensile strength, noodles with optimal formulas were obtained, namely mocaf 63%, wheat 36% and latoh 1%. The optimum formula was similar to sample 10 (60:39:1) which exhibited characteristics such as a bright color, a rather smooth appearance with no cracks, a very soft mouthfeel, a bit springiness and elasticity, and a slightly non-sticky texture to the teeth without a fishy aroma. The essential and non-essential amino acids with the highest concentration contained in the Mocaf Noodles’ optimum formula were glutamate and leucine. Mocaf noodles with added latoh had low fat content but high carbohydrates and were rich in essential amino acids compared to other noodles. Additionally, they possessed sensory characteristics that were deemed acceptable by the panelists.

Effect of Bletilla Striata Polysaccharide on the Pasting, Rheological and Adhesive Properties of Wheat Starch.

A combination of starch and hydrocolloids is a facile method for physically modifying native starch. Bletilla striata polysaccharide (BSP) is a glucomannan with various applications in the food and cosmetic industries as a thickening agent. This study focused on investigating the impact of BSP on the pasting, rheological and adhesive properties of wheat starch (WS). Results from a Rapid Visco-Analyzer (RVA) revealed that the addition of BSP (below 0.2%) resulted in increases in peak viscosity, breakdown and setback values. However, for the addition of BSP at a higher concentration (0.3%), the opposite trend was observed. Rheological measurements indicated that the presence of BSP increased the viscoelastic properties of WS-BSP gels. TGA results demonstrated that the presence of BSP promoted the thermal stability of starch. FTIR results indicated the short-range order structure decreased at low addition concentrations of BSP (0.05% and 0.1%) and increased with higher BSP addition concentrations (0.2% and 0.3%). SEM observation showed that the BSP improved the hydrophilic property of starch gels and decreased the size of pores in the starch gels. Further, the mechanical properties of paper samples unveiled that the present of BSP in starch gels obviously increased its bonding strength as an adhesive.

One-Time Mixed Nitrogen Fertilizers Application Enhances Yield and Eating Quality of Late-Maturing Medium Japonica Rice in the Yangtze River Delta

This study addresses the uncertainty regarding the potential of a one-time basal application of mixed nitrogen (N) fertilizer to optimize both yield and eating quality of late-maturing medium japonica rice Nangeng 9108 and Fenggeng 1606 in the Yangtze River Delta. Six distinct combinations of blended N fertilizers were evaluated, with conventional split fertilization serving as the control. The blended formulations combined controlled-release N fertilizer (CRNF) and quick-acting N fertilizer (CNF) at a 1:1 ratio. Furthermore, the CRNF component was a combination of two CRNF types with varied N-release durations at a 4:1 ratio, leading to treatments labeled A1, A2, B1, B2, C1, and C2. Over a 2-year study, treatments B1, B2, C1, and C2 matched or surpassed the control in grain yield, with C1 and C2 yielding 2.83–4.85% more. Among the above high-yield treatments, C1 showcased the best rice eating quality, which exhibited increased peak viscosity, hot viscosity, cool viscosity, breakdown, and taste value of milled rice, and a decrease in rice protein content (PC). This enhancement in quality correlated with N accumulation patterns and their interplay with sink capacity. Specifically, a higher N accumulation resulted in a robust sink capacity under the C1 treatment, thus reducing N availability per unit sink capacity (NAV) and rice PC, ultimately enhancing the overall palatability of milled rice. Conclusively, the C1 fertilizer blend demonstrates potential in concurrently boosting yield and eating quality of late-maturing medium japonica rice in the region.

Modified TAL expression in rice plant regulates yield components and grain quality in a N-rate dependent manner

Context or problemHigher-yield and superior-quality rice are the major goals in rice breeding and nitrogen management. Genetic modification combined with optimal nitrogen (N) fertilization is expected to realize it. Objective or research questionModification in transaldolase (TAL) expression alters both the number and pattern of vascular bundles in rice plants, but its interactions with N rate remains unknown. MethodsWe employed three representative lines with different expression levels of TAL in the same genetic background (Wuyunjing 7, WT), and analyzed their responses in dry matter accumulation (DMA), carbohydrate transport, grain filling, yield, yield components, and grain quality under a wide range of N rate. ResultsIncreased expression of TAL (OE) promoted rice yield by producing more spikelets per panicle and higher 1000-grain weight, while decreased expression of TAL lowered the seed setting rate and grain weight significantly. Under a fixed N rate, when TAL expression was altered, the direct path coefficients of the seed setting rate and 1000-grain weight to the yield were higher than other yield components, especially at a high N rate. Decreased expression of TAL (RNAi) significantly reduced the starch and non-structural carbohydrates (NSC) contents in the stems, but enhanced the soluble sugar retention, whereas increased expression of TAL enhanced the translocation of NSC. The grain weight at maturity and mean grain-filling rate (mg d−1) increased significantly along with the TAL expression, but their differences among RNAi, WT and OE narrowed at higher N rate. Decreased expression of TAL enhanced the apparent amylose content (ACC) and protein (PC), reduced the starch granule size, and caused a loose starch arrangement and elevated chalkiness, as a consequence, significantly reduced the peak viscosity, hot viscosity, final viscosity, and taste value in a N rate dependent manner. The taste values of OE and WT were similar and the highest value was attained under a moderate N rate. ConclusionsTAL expression plays an important role in the regulation of assimilate supply, grain filling, yield formation, and grain quality. Increased expression of TAL alleviates competition effect among the yield components and enhances the yield potential, especially under moderate to high N rate. Higher TAL expression combined with a moderate N rate improves ECQ. Implications or significanceTAL expression and N rate interacts to regulate yield components and quality. This finding provides meaningful knowledge to administering N rate and genetically modifying TAL expression in a rice variety.

Effect of Aspergillus flavus contamination on the fungal community succession, mycotoxin production and storage quality of maize kernels at various temperatures

Aspergillus flavus, a notorious saprobe and opportunistic plant pathogen, alters mycotoxin contamination and biochemical components in maize kernels during processing and storage, thereby reducing the possibilities of maize end use and compromising food safety. This study explored changes in mycotoxin production, fungal community succession and biochemical components in maize kernels stored at 20, 25 and 30 °C, exposed to A. flavus. Results showed that aflatoxin B1 concentration increased over time, reaching 4.88 μg/kg at 20 °C, 167.23 μg/kg at 25 °C and 349.64 μg/kg at 30 °C after 15 days of storage, whereas the zearalenone production was characterized by an increase followed by a decrease. Correspondingly, the number of molds gradually increased and reached a stable stage after 10 days. High-throughput sequencing of the internal transcribed spacer (ITS) revealed that Eurotium dominated the fungal communities, with A. flavus reaching maximum abundance in maize kernels stored at 30 °C for 15 days. Correlation analysis indicated that the relative abundance of A. flavus was significantly negatively correlated with the content of zein and moisture (P < 0.05). Moreover, the wet milling process of maize effectively eliminated the concentration of aflatoxin B1 and zearalenone from the starch. Pasting temperature and setback value of starch decreased while peak viscosity, final viscosity and breakdown value increased with storage. These findings indicate that interactions between the epiphytic fungal community and A. flavus at elevated storage temperatures aggravate both maize quality deterioration and mycotoxin contamination. Furthermore, they have a discernible impact on the pasting properties of starch. This insight informs strategies to control fungal infections during maize processing and storage.

The Effect of Terminal Freezing and Thawing on the Quality of Frozen Dough: From the View of Water, Starch, and Protein Properties.

Frozen dough is suitable for industrial cold chain transportation, but usually experiences temperature fluctuations through the cold chain to the store after being refrigerated in a factory, seriously damaging the product yield. In order to analyze the influence mechanism of temperature fluctuation during the terminal cold chain on frozen dough, the effects of terminal freezing and thawing (TFT) on the quality (texture and rheology) and component (water, starch, protein) behaviors of dough were investigated. Results showed that the TFT treatment significantly increased the hardness and decreased the springiness of dough and that the storage modules were also reduced. Furthermore, TFT increased the content of freezable water and reduced the bound water with increased migration. Additionally, the peak viscosity and breakdown value after TFT with the increased number of cycles were also increased. Moreover, the protein characteristics showed that the low-molecular-weight region and the β-sheet in the gluten secondary structure after the TFT treatment were increased, which was confirmed by the increased number of free sulfhydryl groups. Microstructure results showed that pores and loose connection were observed during the TFT treatment. In conclusion, the theoretical support was provided for understanding and eliminating the influence of the terminal nodes in a cold chain.

Effects of whole quinoa flour addition on the pasting property, dough rheology, and steam bread textural property of wheat flour

Addition of whole quinoa flour (WQF) into wheat flour is a promising approach to make quinoa food efficient, but the amount of WQF addition has a great influence on the quality of the quinoa food. The water-soluble index, swelling power, pasting property, dough rheological properties, and steam bread textural property of wheat flour containing 10 - 50% (w/w) WQF were investigated in the present work. Results showed that water soluble index and swelling power of mixed flour decreased gradually as the WQF content increased. Mixed flour containing higher WQF content (30 - 50%) had a lower peak viscosity, breakdown, and setback value than mixed flour containing lower content WQF (10 - 20%). Doughs containing 30 - 50% WQF had a weaker dough stability, less dough development time, but an increased water absorption and softening degree than the doughs containing 10 - 20% WQF. Dough’s extension resistance increased and then decreased with the addition of WQF. Dough energy and extensibility of the mixed flour decreased with increasing level of WQF (10 - 50%). In addition, hardness and chewiness of steam bread made by mixed flour increased with increasing amount of WQF (10 - 50%). In view of the practical point, the maximum addition level of WQF was 20% when making a quinoa-wheat steam bread without any food additives.

Knocking Out OsAAP11 to Improve Rice Grain Quality Using CRISPR/Cas9 System.

The demand for rice grain quality, particularly in terms of eating and cooking quality, is increasingly concerning at present. However, the limited availability of rice-quality-related gene resources and time-consuming and inefficient traditional breeding methods have severely hindered the pace of rice grain quality improvement. Exploring novel methods for improving rice grain quality and creating new germplasms is an urgent problem that needs to be addressed. In this study, an amino-acid-transporter-encoding gene OsAAP11 (Os11g0195600) mainly expressed in endosperm was selected as the target for gene editing using the CRISPR/Cas9 system in three japonica genetic backgrounds (Wuyungeng30, Nangeng9108, and Yanggeng158, hereafter referred to as WYG30, NG9108, and YG158). We successfully obtained homozygous osaap11 mutants without transgenic insertion. Subsequently, we conducted comprehensive investigations on the agronomic traits, rice grain quality traits, and transcriptomic analysis of these mutants. The results demonstrate that loss of OsAAP11 function led to a reduced amino acid content and total protein content in grains without affecting the agronomic traits of the plants; meanwhile, it significantly increased the peak viscosity, holding viscosity, and final viscosity values during the cooking process, thereby enhancing the eating and cooking quality. This study not only provides valuable genetic resources and fundamental materials for improving rice grain quality but also provides novel technical support for the rapid enhancement of rice grain quality.

Soy protein isolate improves the structure, starch retrogradation and water distribution of a Chinese traditional rice/bean food Dousi: towards high low‐temperature storage stability

SummaryFresh wet Dousi (FWD) is a traditional Chinese food made from rice and beans through wet milling and dry heating. However, its drawback of storage stability at low temperatures (4 °C) challenges the market development. Thus, soy protein isolate (SPI) was incorporated to improve its structure, starch retrogradation and water distribution. SPI reduced FWD's peak viscosity, trough viscosity, final viscosity and setback values. Additionally, the hardness, retrogradation enthalpies (ΔH), crystallinity and infrared absorbance ratio at 1047/1022 cm−1 and 995/1022 cm−1 of FWD decreased significantly after adding SPI. From the rheological, LF‐NMR and SEM results, SPI was favourable to the formation of porous and flexible structure within FWD. The variation of food structure improved the binding ability of starch or other components with water. This work indicated that SPI could improve the low‐temperature stability of FWD by enhancing the water capability, inhibiting the starch retrogradation, and promoting structural compliance within the network.