Proton Affinity Values Research Articles

Rational Design of Cyclopentadiene-Based Super- and Hyperacids Based on Aromaticity.

The design and synthesis of neutral organic superacids have been of interest recently due to their vast applications in chemistry and material sciences, for example, olefinic polymerization, isolation of highly reactive short-lived cations, etc. Cyclopentadiene behaves as a mild organic acid, producing a stable conjugate base by gaining aromaticity and conjugation after deprotonation. To stabilize conjugate bases of organic acids to show superacidities and hyperacidities, we considered aromatic phenyl substituents with cyclopentadiene (mono-, di-, and triphenyl-substituted cyclopentadiene and their cyano derivatives). The MP2, DFT (B3LYP, M06-2X), and CBS-QB3 methods were used to calculate the gas-phase proton affinities of the parent cyclopentadiene, and the DFT methods were chosen for the substituted cyclopentadiene as they yield an experimental proton affinity of cyclopentadiene of 253.66 kcal/mol (Expt. 253.6 ± 1.3 kcal/mol). The stable trisubstituted cyclopentadiene derivative shows gas-phase enthalpies of deprotonation (ΔHacid) of 245 and 239 kcal/mol with DFT B3LYP and M06-2X methods, respectively, with values in the range of hyperacidity. Some of the tautomers of cyclopentadiene derivatives show hyperacidity, with proton affinity values of 205-240 kcal/mol. Triphenyl-substituted cyclopentadiene behaves as a moderate acid but transforms into a superacid after replacing the phenyl group with nitrobenzene, which is a stronger acid than H2SO4 (ΔHacid = 298 kcal/mol). The nucleus-independent chemical shift (NICS) shows the extent of conjugation in the derivatives of cyclopentadienyl anions after deprotonation, which affects the stabilities of conjugate bases, i.e., the acidities of the protonated species. The calculated harmonic oscillator model of aromaticity and NICS indices reveal that the stability of conjugate bases as well as their acidities increase with increasing aromaticity of cyclopentadiene rings after deprotonation in all molecules.

Mechanistic insight into the kinetic fragmentation of norpinonic acid in the gas phase: an experimental and density functional theory (DFT) study

Abstract. Norpinonic acid has been known as an important α-pinene atmospheric secondary organic aerosol (SOA) component. It is formed in the reaction of α-pinene, β-pinene or verbenone with atmospheric oxidizing reagents. In the presented study, tandem mass spectrometry techniques were used to determine the exact norpinonic acid fragmentation pathway in the gas phase. The precursor anion – deprotonated norpinonic acid (m/z 169), generated in an electrospray (ESI) source – was introduced into the collision cell of the mass spectrometer and fragmented using the energy-resolved collision-induced dissociation (ER-CID) technique. The experimental energy values of degradation processes were determined via analysis of the breakdown curves. Quantum chemical calculations of the reaction models were also constructed, including calculation of all transition states. Comparison between the experimental and the theoretical threshold energies calculated at a ωB97XD/6-311+G(2d,p) theoretical level has shown a good correlation. Two basic pathways of the fragmentation of the parent anion [M-H]− (m/z 169) were observed. Firstly this leads to the decarboxylation product (m/z 125) and secondly to the loss of a neutral molecule (C4H6O), together with the formation of the anion m/z 99. On the other hand, the breakdown of the anion m/z 125 gives rise to the m/z 69, 57 and 55 ions. To confirm structures formed during ER-CID experiments, the gas-phase proton transfer reactions were examined of all norpinonic acid anionic fragments with a series of neutral reagents, characterized by proton affinity (PA) values. Based on PA difference analysis, the most possible chemical structures were proposed for the observed fragment anions.

A comprehensive study on three typical photoacid generators using photoelectron spectroscopy and abinitio calculations.

Conducting a comprehensive molecular-level evaluation of a photoacid generator (PAG) and its subsequent impact on lithography performance can facilitate the rational design of a promising 193nm photoresist tailored to specific requirements. In this study, we integrated spectroscopy and computational techniques to meticulously investigate the pivotal factors of three prototypical PAG anions, p-toluenesulfonate (pTS-), 2-(trifluoromethyl)benzene-1-sulfonate (TFMBS-), and triflate (TF-), in the lithography process. Our findings reveal a significant redshift in the absorption spectra caused by specific PAG anions, attributed to their involvement in electronic transition processes, thereby enhancing the transparency of the standard PAG cation, triphenylsulfonium (TPS+), particularly at ∼193nm. Furthermore, the electronic stability of PAG anions can be enhanced by solvent effects with varying degrees of strength. We observed the lowest vertical detachment energy of 6.6eV of pTS- in PGMEA solution based on the polarizable continuum model, which prevents anion loss at 193nm lithography. In addition, our findings indicate gas-phase proton affinity values of 316.4 kcal/mol for pTS-, 308.1 kcal/mol for TFMBS-, and 303.2 kcal/mol for TF-, which suggest the increasing acidity strength, yet even the weakest acid pTS- is still stronger than strong acid HBr. The photolysis of TPS+-based PAG, TPS+·pTS-, generated an excited state leading to homolysis bond cleavage with the lowest reaction energy of 83 kcal/mol. Overall, the PAG anion pTS- displayed moderate acidity, possessed the lowest photolysis reaction energy, and demonstrated an appropriate redshift. These properties collectively render it a promising candidate for an effective acid producer.

DFT insights into the basicity of some cyclic allenes

ABSTRACT The proton affinity (PA) and gas phase basicity values of previously reported cyclic allene series are investigated using high-level quantum chemical calculations. Some of the studied structures possessed more than one protonation site. All protonation types were explored for each structure and the compounds with PA value more than ≈1030 kJ mol−1 were considered superbasic structures. Cyclic allene's basicity strength was affected by ring size, adjacent heteroatom's presence and resonance existence in protonated form.

Development of benzimidazole derivatives as efficient matrices for the analysis of acidic small-molecule compounds using matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry in negative ion mode.

With the development of matrix-assisted laser desorption/ionisation (MALDI) mass spectrometry (MS) in spatial localisation omics research on small molecules, the detection sensitivity of the matrix must increase. However, the types of matrices suitable for detecting acidic small molecules in (-) MALDI-MS mode are very limited and are either not sensitive enough or difficult to obtain. More than 10 commercially available benzimidazole and benzothiazole derivatives were selected as MALDI matrices in negative ion mode. MALDI-MS analysis was performed on 38 acidic small molecules and mouse serum, and the matrix effects were compared with those of the common commercial matrices 9-aminoacridine (9AA), 1,5-naphthalenediamine (DAN) and 3-aminoquinoline (3AQ). Moreover, the proton affinity (PA) of the selected potential matrix was calculated, and the relationships among the compound structure, PA value and matrix effect were discussed. In (-) MALDI-MS mode, a higher PA value generally indicates a better matrix effect. Amino-substituted 2-phenyl-1H-benzo[d]imidazole derivatives had well-defined matrix effects on all analytes and were generally superior to the commonly used matrices 9AA, DAN and 3AQ. Among them, 2-(4-(dimethylamino-phenyl)-1H-benzo[d]imidazole-5-amine (E-4) has the best sensitivity and versatility for detecting different analytes and has the best ability to detect fatty acids in mouse serum; moreover, the limit of detection (LOD) of some analytes can reach as low as ng/L. Compared to 9AA, DAN and 3AQ, matrix E-4 is more effective at detecting low-molecular-weight acidic compounds in (-) MALDI-MS mode, with higher sensitivity and better versatility. In addition, there is a clear correlation between compound structure, PA and matrix effects, which provides a basis for designing more efficient matrices.

A brief computational look at the basicity strength of some experimentally observed strained allenes

The proton affinity (PA) and gas phase basicity (GB) values for some of previously detected strained cyclic allenes are estimated by computations incorporating DFT calculations with functional B3LYP in the 6–311 + G(d,p) basis. Our calculations demonstrate that all of the studied structures show high basicity strengths and some of them can be even considered as superbasic compounds. The bond lengths and bond angles changes in allenic moiety upon protonation as well as effective parameters on basicity strengths are discussed for each case.

Machine learning and DFT coupling: A powerful approach to explore organic amine catalysts for ring-opening polymerization reaction

Recently, using well-known data to drive the chemical feature of catalysts for the specified reaction has emerged as a prevalent approach in catalysis science. Amines as essential compounds play crucial roles in living organisms, pharmaceutical, agricultural applications, and various chemical reactions. However, developing a systematic strategy for the screening of amine as an organic catalyst in ring-opening polymerization (ROP) remains a significant challenge. In predicting the catalytic performance of ROP reactions, the proton affinity (PA) of amines serves as a significant indicator, which reflects the basicity of the catalyst and the activity of the ROP reaction. Herein, we conducted a systematical analysis on a dataset of 259 unique amine compounds, involving the application of seven classical machine learning models and 23 molecular descriptors. The predictive model was constructed with molecular descriptors and DFT-calculated PA values. Among the regression results, the Support Vector Machine (SV) model exhibited the optimal performance, with R2, average mean absolute error (MAE) and root mean square error (RMSE) achieving 0.84, 8.38 kJ/mol and 13.77 kJ/mol, respectively. We further employed SHAP (SHapley Additive exPlanations) to evaluate feature significance and provide insights into screening amine catalysts for ROP reaction. The top 10 amines with high PA values are enumerated and discussed. This workflow of coupling machine learning and the DFT approach proves an effective way for screening amine catalysts in ROP reaction.

Schwesinger Bases – Phosphazene Bases Stabilized by Multiple Counterpoise Hyperconjugative Interactions

AbstractElectronic structure and proton affinity of Schwesinger bases (Pn bases where n=1–4 indicates the number of phosphorous atoms) were studied using quantum mechanical calculations carried out at M06/def2‐TZVPP//BP86‐D3(BJ)/def2‐TZVPP level of theory. Each phosphorous atom is in the ligating environment of four tricoordinated/dicoordinated nitrogen atoms having one/two lone pairs. While the lone pairs on the tricoordinated/dicoordinated nitrogen atoms act as hyperconjugative donors, the P−N σ* orbitals act as hyperconjugative acceptors. These phosphazene bases are highly stabilized by synergetic hyperconjugative interactions which can accordingly be termed as counterpoise hyperconjugation. The number and the extent of pseudo‐π‐delocalization resulting from hyperconjugative interactions get enhanced as P1 changes to P4. Moreover, additional pseudo‐π‐delocalization starts to appear as P1 changes to P4. The phosphazene P2 has one Ndi(σ)−P−Ndi(σ)−P pseudo‐π‐delocalization which is similar to that of classical π‐delocalization in 1,3‐butadiene. On the other hand, phosphazene P3 has two pseudo‐π‐delocalization similar to that of 1,3‐butadiene and one pseudo‐π‐delocalization similar to that of 1,3‐pentadienyl cation. There are three pseudo‐π‐delocalization similar to that of 1,3‐butadiene and another three pseudo‐π‐delocalization similar to that in 1,3‐pentadienyl cation in P4. Consequently, pseudo‐π‐delocalization is present in all the tetrahedral symmetry planes of P4. Hence, P4 can be considered as a three‐dimensional pseudo‐π delocalized system. Even though the lone pair orbitals are stabilized by hyperconjugative interactions, they are susceptible to protonation. Among the dicoordinated and tricoordinated nitrogen atoms, the proton affinity of the dicoordinated nitrogen atom connected to the tBu group is much higher (257.4 kcal/mol–291.6 kcal/mol), and the proton affinity values increase on going from P1 to P4. The very high proton affinity of this dicoordinated nitrogen atom indicates its superbasic character.

Comparative study of the antioxidant capability of EDTA and Irganox

Oxidative stress makes it difficult to preserve food and negatively affect the applicability of polymeric packaging. It is typically caused by an excess of free radicals, and it is dangerous to human health, resulting in the onset and development of diseases. The antioxidant ability and activity of ethylenediaminetetraacetic acid (EDTA) and Irganox (Irg) as synthetic antioxidant additives were studied. Three different antioxidant mechanisms were considered and compared by calculating bond dissociation enthalpy (BDE), ionization potential (IP), proton dissociation enthalpy (PDE), proton affinity (PA), and electron transfer enthalpy (ETE) values. Two density functional theory (DFT) methods were used, M05-2X and M06-2X with the 6–311++G(2d,2p) basis set in gas phase. Both additives can be used to protect pre-processed food products and polymeric packaging from oxidative stress related material deterioration. By comparing the two studied compounds, it was found that EDTA has a higher antioxidant potential than Irganox. To the best of our knowledge several studies have been carried out to understand the antioxidant potential of various natural and synthetic species, but EDTA and Irganox were not compared and investigated before. These additives can be used to protect pre-processed food products and polymeric packaging and prevent material deterioration caused by oxidative stress.

Dative quadruple bonds between d10 transition metals and beryllium in BeM(PMe3)2 and BeM(CO)2 (M = Ni, Pd, and Pt) complexes: Transition metal fragments as six‐electron donor and two‐electron acceptor

AbstractThe structure, chemical bonding, and reactivity of neutral 16 valence electrons (VE) transition metal complexes of beryllium, BeM(PMe3)2 (1M‐Be) and BeM(CO)2 (2M‐Be, M = Ni, Pd, and Pt) were studied. The molecular orbital and EDA‐NOCV analysis suggest dative quadruple bonds between the transition metal and beryllium, viz., one Be→M σ bond, one Be←M σ bond, and two Be←M π bonds. The strength of these bonding interactions varies based on the ligands coordinated to the transition metal. The Be←M σ bond is stronger than the Be→M σ bond when the ligand is PMe3, whereas the reverse order is observed when the ligand is CO. This is attributed to the higher π acceptor strength of CO as compared to PMe3. Since these complexes have M–Be dative quadruple bonds, the beryllium center is susceptible to ambiphilic reactivity, as indicated by high proton and hydride affinity values.

A DFT evaluation of molecular reactivity of volatile organic compounds in support of chemical ionization mass spectrometry

Gas-phase molecular properties of volatile organic compounds (VOCs) play an important role in the selection of gas-phase reagent ions for chemical ionization mass spectrometry (CI-MS). Chemical ionization-based mass spectrometry techniques such as proton transfer reaction mass spectrometry (PTR-MS) and selected ion flow-tube mass spectrometry (SIFT-MS) provide real-time, rapid, and online detection and quantification of VOCs using thermodynamics and kinetics of ion-molecule gas-phase reactions. We apply hybrid density functional theory (DFT) to compute proton affinity (PA), ionization energy (IE), and global reactivity parameters for VOCs, which are widely regarded as the primary sources of taints and off-flavors in wine. Atomic polar tensor (APT) charges and total energies at the stationary point for neutral and protonated molecules are also computed. PA and IE values determine the CI-MS mode of reactions, either proton transfer or electron transfer from the reagent gas ions to VOCs. Global reactivity parameters, such as chemical potential (μ), chemical hardness (η), softness (σ), and electrophilic nature (ω) as obtained from frontier molecular orbitals, are considered useful in rationalizing the chemical reactivity patterns of the molecules. A benchmark calculation of indole molecule with MP2, B3LYP, and M06-2X DFT methods at thermodynamically and kinetically stable protonation sites further supports the applied DFT method. Since limited data are available on computed parameters, the reported values would support CI-MS quantification of trace-level VOCs not only in wine but also in various food products.

Insertion Reaction of Me3SiN3 with Bis(germylene).

Herein, we describe the redox reaction of bis(germylene) PhC(NtBu)2Ge-Ge(NtBu)2CPh with different equivalents of Me3SiN3 affording two distinct products. The reaction of Me3SiN3 with bis-germylene in a 1:1 molar ratio results in compound 1 at -78 °C; however, treatment of bis-germylene with a 2.1 equiv of Me3SiN3 at room temperature results in compound 2. The formation of 1 and 2 can be rationalized by two successive 3 + 1 cycloadditions of Me3SiN3 with the germanium center of bis(germylene) and N2 elimination. All of the compounds are well-characterized by various spectroscopic techniques and single-crystal X-ray structural analyses. Density functional theory (DFT) calculations suggest that compound 2 has a dicoordinated nitrogen atom, which is stabilized by hyperconjugative interactions, resulting in pseudo-germylimine moiety. However, the dicoordinated nitrogen atom shows high basicity as indicated by proton affinity values. These are rare examples of isolated products that show insertion as well as simultaneous redox properties of bis(germylene).

Density functional theory study on gas‐phase microscopic basicity of some ketenimine derivatives and their isomers/tautomers

AbstractMicroscopic basicity of some ketenimine derivatives 1–12 and their isomers/tautomers, bearing an unsaturated ring, has been studied in the present work. Isomerization process for some ketenimine derivatives and their protonated forms was also investigated by density functional theory (DFT) calculations. The protonation study in gas phase was performed by the DFT–B3LYP/6‐311+G(d,p) computational method. The results show that all the proposed ketenimines (less stable than their isomers/tautomers) have proton affinity (PA) values that are more than at least 20 kJ mol−1 greater than the PA of 1,8‐bis‐(dimethylamino)naphthalene. The primary strategy in this study for designing new exceptionally rare ketenimine forms possessing strong basicity is to link structurally an unsaturated ring to the molecular framework and to build conjugated systems, for which the positive charge of the conjugate acids is delocalized through resonance. PA values are enhanced by placing electron‐donating substituents on the unsaturated rings, stabilizing the conjugate acid. Two indices of aromaticity, the nucleus‐independent chemical shift and the harmonic oscillator model of aromaticity associated with the unsaturated ring, were calculated and compared for neutral and protonated forms. Natural bond orbital (NBO)–Wiberg bond orders, highest occupied molecular orbital (HOMO), and molecular electrostatic potential investigations were also applied to explain the π‐type interaction of the unsaturated ring with the ketenimine unit.

Utilizing the synergistic effect between imidazole aromaticity and guanidine structure for the computational design of novel uncharged organic superbases

Proton affinities (PA) and gas phase basicities (GB) of novel structure of non-ionic organic superbases on the basis of guanidine embedded imidazole framework, were computed at B3LYP/6-311+G(d,p) level of theory. The used logic for designing these structures is synergistic effect of guanidine-imidazole twin in order to aromatization and subsequent stabilization of imidazole ring upon protonation which is strengthen with push-pull effect of variety electron-donating groups on the five-membered ring. This strategy caused to the design of organobases with considerable basicity in the range of 985.39–1177.68 kJ mol−1. Majority of the designed structures show the PA values more than 1028 kJ mo1−1, as the threshold of superbasicity. The HOMA/HOMED, and NICS(1)zz analyses were used for each structure and its conjugated acid in order to better understand and discuss the basicity values.

Proton Affinities of Alkanes.

Chemical characterization of complex mixtures of large alkanes is critically important for many fields, including petroleomics and the development of renewable transportation fuels. Tandem mass spectrometry is the only analytical method that can be used to characterize such mixtures at the molecular level. Many ionization methods used in mass spectrometry involve proton transfer to the analyte. Unfortunately, very few proton affinity (PA) values are available for alkanes. Indeed, previous research has shown that most protonated alkanes (MH+) are not stable but fragment spontaneously via the elimination of a hydrogen molecule to form [M - H]+ ions. Here, the PAs of several n-alkanes and alkylcyclohexanes containing 5-8 carbon atoms, n-pentane, n-hexane, n-heptane, n-octane, cyclohexane, methylcyclohexane, and ethylcyclohexane, were determined via bracketing experiments by using a linear quadrupole ion trap mass spectrometer. Monitoring the formation of the [M - H]+ ions in reactions between the alkanes and protonated reference bases with known PAs revealed that the PAs of all the alkanes fell into the range 721 ± 20 kJ mol-1. In order to obtain a more accurate estimate of the relative PAs of different alkanes, two alkanes were introduced simultaneously into the ion trap and allowed to react with the same protonated reference base. Based on these experiments, the longer the alkyl chain in an n-alkane or alkylcyclohexane the greater the PA. Further, when considering alkanes with the same number of carbon atoms, the PAs of those with a cyclohexane ring were found to be greater than those with no such ring.

Thermodynamic and kinetic studies on antioxidant capacity of amentoflavone: a DFT (density functional theory) computational approach

Density functional theory (DFT) at the theoretical M06-2X/6-311G(d,p) level was used to assess thermodynamics and kinetics in the antioxidative action of amentoflavone (AF). The antioxidative HAT pathway (H-atom transfer) is assigned to this compound in gas, but the SPL-ET (sequential proton loss-electron transfer) is the main route in polar solvents methanol and water. In all four mediums gas, benzene, methanol, and water, 4‴-OH is the most active site in free radical quenching with the lowest BDE (bond dissociation enthalpy) values of 81.8–84.8 kcal/mol, as well as it exerted the PA (proton affinity) values of 29.8–33.0 kcal/mol in methanol and water. Regarding kinetics, when interacted with •OOH and •NO2 in gas and methanol, 4‴-OH group is also responsible for the lowest ΔG # values (Gibbs free energy of activation), and the highest rate constant K values. Acidic assessment also indicated that 4‴-OH is associated with the strongest acidity (the lowest pKa). Two favorable oriented 4‴-OH and 7-OH groups further exhibited antioxidative activity since they prevented metal ions Zn2+ and Fe2+ from participating in free radical producing processes, in which the most stable complex [FeAF(H2O)4] generated the lowest IE value of −206.2 kcal/mol, and E gap value of 3.491 kcal/mol, but the highest MIA values of 184.6 kcal/mol in methanol.

Super/hyperbasicity of novel diquinonimino derivatives of guanidine in gas phase

In the present investigation, we are trying to design appropriate super/hyperbasic structures on the basis of guanidine and the application of electron-donating of substituted R groups, aromaticity stabilization of a seven-membered and two six-membered fused rings via the calculation of Proton Affinity (PA) and Gas-phase Basicity (GB), using Density Functional Theory (DFT). The results showed that the effective push-pull effect has been existed from R donating groups to guanidine moiety. In order to monitoring aromaticity alterations in the rings before and after protonation, Nucleus-independent Chemical Shift (NICS), Harmonic Oscillator Model of Aromaticity (HOMA), and Harmonic Oscillator Model of Electron Delocalization (HOMED) indexes were used. Results ascertained that all of the designed structures have the PA value further than superbasicity threshold and also even four structures offered PA values higher than hyperbasicity threshold (11, 13, 18, and 19).

Theoretical insight into mechanism of antioxidant capacity of atorvastatin and its o-hydroxy and p-hydroxy metabolites, using DFT methods

Atorvastatin (ATV) inhibits the HMG-CoA reductase. This compound is believed to exhibit high radical scavenging abilities against lipoprotein oxidation, warranting an investigation of its antioxidant capacity. In this study a series of quantum chemical parameters were calculated, at B3LYP functional and 6-31+G(d,p) basis set and integral equation formalism (IEF-PCM) method, to describe molecular properties and clarify the radical scavenging mechanism of Atorvastatin and its hydroxy ortho and para metabolites. Calculations of global reactivity descriptors and the thermodynamic parameters suggested that both the ATV and its o-OH and p-OH metabolites are favorable antioxidants, and that the main antioxidant mechanism follows the sequential proton loss electron transfer (SPLET). The hydrogen of O–H group of carboxylic acid on the three compounds is the most likely for abstraction, indicating that inhibiting free radicals is mainly due to this hydrogen. ATV and its metabolites have lower values of Proton Affinity (PA) than ascorbic acid.

Computational study of synthetic and natural polymer additives — Antioxidant potential of BHA, TBHQ, BHT, and curcumin

The antioxidant potential of commonly used synthetic and natural antioxidant additives, including butylated hydroxytoluene (BHT), butylated hydroxyanisole (BHA), tert‑butylhydroquinone (TBHQ), and natural additive, curcumin have been studied and compared by calculating the bond dissociation enthalpy (BDE), ionization potential (IP), proton dissociation enthalpy (PDE), proton affinity (PA), and electron transfer enthalpy (ETE) values for each potential hydrogen donor site. The results indicate that, in each additive an OH group has the highest antioxidant potential (lowest BDE value). The studied molecules can be ranked based on their antioxidant potential as follows: BHT > BHA ≈ TBHQ > curcumin A > curcumin D. By comparing with commonly used polymers, in each studied species, there is at least one X-H bond which has a lower BDE value than in the corresponding polymeric material. Thus, all studied additives are potentially applicable to protect polymeric materials. BHT is the best radical scavenger additive in case of the hydrogen atom transfer (HAT), and the sequential proton loss electron transfer (SPLET) mechanisms to donate a H atom, but in single electron transfer proton transfer (SETPT) curcumin could also be suitable.

Calculated rate coefficients between CI-MS reagent ions and organosulfur compounds causing food taints and off-flavours

Volatile sulfur compounds play a crucial role in the aroma profile of food and fermented beverages. We explore chemical-ionization mass spectrometry (CI-MS) ion-molecule reaction kinetics of commonly used reagent ions to a list of volatile organic sulfur compounds (VOSCs). We compute the rate coefficients of ion-molecule reactions, useful for the accurate identification and quantification of trace gases, using capture collision models based on the electric dipole moment and polarizability of the neutral VOSCs. To this aim, we evaluate molecular properties, such as the electric dipole moment, polarizability, proton affinity (PA), and ionization energy (IE) for each VOSC, by means of hybrid density functional theory (DFT) simulations. The PA and IE values are useful in the selection of appropriate reagent ions to be used in CI-MS. We thoroughly investigate collision rate coefficients at effective temperatures and internal energies, as relevant for highly energetic proton transfer reaction mass spectrometry (PTR-MS) drift tube conditions. The data provided will be valuable for the rapid quantification of VOSCs in food and fermented beverages.