β-TCP Group Research Articles

Comparison of the efficacy of tricalcium phosphate and mineralized plasmatic matrix graft for the bone defect in the distal second molar tooth after surgery of the lower impacted third molar tooth

Aim: After the extraction of mandibular horizontal and mesioangular teeth, a defect occurs in the distal part of the second molar. In this study, the effect of MPM on these defects was evaluated. Materials and methods: 36 patients randomly divided into 3 groups. The first group included MPM and PRF. The second group included B-tcp and PRF. In the 3rd group, the extraction socket was left empty. At preoperative and postoperative 6th months, periodontal pocket depth, gingival index and plaque index, and the distance between the enamel junction and crestal bone at the distal of the 2nd molar were measured by CBCT. 8 patients were removed for various reasons. 28 patients were evaluated. Results: Preoperative and postoperative periodontal pocket depths at the sixth month were 7.67 ± 1.58 mm and 4.67 ± 1.23 mm in the MPM group (p<0.001); 6.60±1.96 mm and 4.70±1.34 mm in the β-TCP group (p<0.001); 6.78±1.48 mm and 5.56±1.01 mm in the control group (p<0.023). Bone defects preoperatively and at six months postoperatively were 7.97 ± 1.04 mm and 3.59 ± 0.66 mm in the MPM group (p<0,001); 6.23 ± 1.37 mm and 2.90 ± 1.04 mm in the β-TCP group (p<0.001); 6.92±0.82 mm and 4.30±0.68 mm in the control group (p<0.001). Conclusion: MPM is an effective graft material to restore the periodontal health of the distal part of the second molar after impacted lower third molar surgery

Radiographic and histological evaluation of bone formation induced by rhBMP-2-incorporated biomimetic calcium phosphate material in clinical alveolar sockets preservation

PurposeWe assessed the efficiency of low-dose recombinant human bone morphogenetic protein-2 (rhBMP-2) incorporated biomimetic calcium phosphate on β-tricalcium phosphate (β-TCP) (rhBMP-2/BioCaP/β-TCP) on bone formation in a model of socket preservation using cone beam computed tomography (CBCT) scanning and histological examination.MethodsForty patients undergoing minimally invasive single-root tooth extraction for dental implantation were randomized to three groups according to the material used for socket preservation: filling with rhBMP-2/BioCaP/β-TCP, β-TCP, or natural healing (kept unfilled) (controls). The alveolar sockets (including the control group) were covered by two-layer collagen membranes and sutured. Two CBCT scans were taken, one immediately after socket preservation procedure (baseline) and another 6 weeks later. Gray values (GVs) obtained from CBCT were recorded. During insertion of the dental implant, biopsies were taken and analyzed histologically for new bone formation, residual material, and unmineralized bone tissue at the core of the biopsy.ResultsThe mean (± standard deviation) changes of GVs of the CBCT scans at the central area of filled materials were as follows: 373.19 ± 157.16 in the rhBMP-2/BioCaP/β-TCP group, 112.26 ± 197.25 in the β-TCP group, and -257 ± 273.51 in the control group. The decrease of GVs in the rhBMP-2/BioCaP/β-TCP group as compared with the β-TCP group was statistically significant (P < 0.001). Differences in new bone formation (P = 0.006) were also found: 21,18% ± 7.62% in the rhBMP-2/BioCaP/β-TCP group, 13.44% ± 6.03% in the β-TCP group, and 9.49% ± 0.08% in controls. The residual material was10.04% ± 4.57% in the rhBMP-2/BioCaP/β-TCP group vs. 20.60% ± 9.54%) in the β-TCP group (P < 0.001). Differences in unmineralized bone tissue (P < 0.001) were also found (68.78% ± 7.67%, 65.96% ± 12.64%, and 90.38% ± 7.5% in the rhBMP-2/BioCaP/β-TC, β-TCP, and control groups, respectively).ConclusionsThis study shows that rhBMP-2/BioCaP/β-TCP is a promising bone substitute with fast degradation and potent pro-osteogenic capacity that can be useful for socket preservation in implant dentistry.Trial registration: ChiCTR, ChiCTR2000035263. Registered 5 August 2020, https://www.chictr.org.cn/ChiCTR2000035263.Graphical

Phosphorylated pullulan promotes calcification during bone regeneration in the bone defects of rat tibiae.

The current study aimed to evaluate bone tissue regeneration using a combination of β-tricalcium phosphate (βTCP) and phosphorylated pullulan (PPL, a phosphate-rich polysaccharide polymer consisting of maltotriose units). Round defects of 2mm diameter were created in the arterial center of rat tibiae, which were further treated with vehicle (control group), βTCP (βTCP group), or βTCP + PPL (βTCP + PPL group) grafts. The control specimens without bone grafts exhibited rapid bone formation after 1week; however, the regenerated bone was not resorbed until 4weeks. In contrast, βTCP-grafted specimens exhibited fewer but thicker trabeculae, whereas the βTCP + PPL group displayed many fine trabeculae at 4weeks. In the βTCP + PPL group, new bone was associated with the βTCP granules and PPL. Similarly, PHOSPHO1-positive osteoblasts were localized on the βTCP granules as well as the PPL. On the other hand, TRAP-reactive osteoclasts predominantly localized on newly-formed bone and βTCP granules rather than on the PPL. No significant differences were observed in the expression of Alp, Integrin αv, Osteopontin, Osteocalcin, and Dmp-1 in PPL-treated MC3T3-E1 osteoblastic cells, suggesting that PPL did not facilitate osteoblastic differentiation. However, von Kossa staining identified abundant needle-like calcified structures extending inside the PPL. Furthermore, transmission electron microscopy (TEM) revealed many globular structures identical to calcified nodules. In addition, calcified collagen fibrils were observed in the superficial layer of the PPL. Thus, PPL may serve as a scaffold for osteoblastic bone formation and promotes calcification on its surface. In conclusion, we speculated that βTCP and PPL might promote bone regeneration and could be integrated into promising osteoconductive materials.

Impact of beta-tricalcium phosphate on preventing tooth extraction-triggered bisphosphonate-related osteonecrosis of the jaw in rats

Antiresorptive or antiangiogenic drugs can cause medication-related osteonecrosis of the jaw that is refractory. Bisphosphonate-related osteonecrosis of the jaw (BRONJ) may be caused by procedures such as tooth extraction damage the alveolar bone, release bisphosphonates (BPs) and impede healing. This study investigated strategies for BRONJ prevention and molecular mechanisms of its onset. We assessed the effectiveness of filling extraction sockets with beta-tricalcium phosphate (β-TCP). Rats were administered zoledronic acid (ZA) 1.2 mg/kg once per week for 2 weeks, and a molar was extracted. They were randomly assigned to the β-TCP group (bone defects filled with 0.01 g of β-TCP) or control group. Tissue content measurements indicated 2.2 ng of ZA per socket in the β-TCP group and 4.9 ng in the control group, confirming BP distribution and BP adsorption by β-TCP in vivo. At 4 weeks after extraction, the β-TCP group had normal mucosal coverage without inflammation. Moreover, at 8 weeks after extraction, enhanced bone healing, socket coverage, and new bone formation were observed in the β-TCP group. Connective tissue in the extraction sockets suggested that local increases in BP concentrations may suppress the local autophagy mechanisms involved in BRONJ. Filling extraction sockets with β-TCP may prevent BRONJ.

Fiber post bonding with beta-tricalcium phosphate incorporated root dentin adhesive. SEM, EDX, FTIR, rheometric and bond strength study.

The aim was to formulate an experimental adhesive (EA) and added nanoparticles (NPs) of beta-tricalcium phosphate (β-TCP) to see the impact on pushout bond strength (PBS) and other mechanical properties. Three adhesives were prepared, including EA (control, without β-TCP NPs), 2.5%-β-TCP NPs containing adhesive (2.5%-NPA), and 5% β-TCP NPs containing adhesive (5%-NPA). For the characterization of the NPs, scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy was accomplished. For the adhesive's characterization, rheological assessment, and degree of conversion (DC) analysis were performed. PBS of these adhesives against resin fiber post to root dentin, interfacial failure categories, and resin dentin interface analysis were also assessed. The β-TCP NPs were seen as agglomerated asymmetrical particles on SEM. These NPs were composed primarily of calcium (Ca), and phosphorus (P). Rheological evaluation of the adhesive's showed a drop in the viscosity of all adhesives at greater angular frequencies. The greatest DC was detected for the EA group (67.54 ± 7.9) followed by 2.5%-NPA group (45.32 ± 5.1), whereas the lowest DC values were seen for the 5%-NPA group (38.97 ± 6.5). Concerning PBS, the 2.5%-NPA revealed the highest values at the coronal (12.81 ± 3.0) and middle (8.50 ± 2.3) sections, whereas, for the apical section, the highest PBS values were seen for the 5%-NPA (4.9 ± 1.6). Most of the failures for all adhesive groups were seen at the adhesive-dentin interface (cohesive type failures) for all root segments (coronal, middle, and apical). The resin-dentin interface analysis verified hybrid layer and resin tag formation for all adhesives, but the presence of dispersed β-TCP NPs was only seen in the two NP-reinforced adhesives. The adding of β-TCP NPs in the adhesive could be beneficial as it could improve its PBS. Suitable rheological properties and dentin interaction were also observed for NP-reinforced adhesives. A reduced DC was seen for both β-TCP NP-containing adhesives as compared to the EA. RESEARCH HIGHLIGHTS: Experimental adhesives were reinforced with beta-tricalcium phosphate (β-TCP) nanocrystals. The β-TCP NPs were seen as agglomerated asymmetrical particles on SEM. These NPs were composed primarily of calcium (Ca), and phosphorus (P). β-TCP adhesives demonstrated superior pushout bond strength and a drop in the adhesive viscosity at greater angular frequencies compared to control adhesive. The greatest DC was detected for the EA group followed by 2.5%- β-TCP group, whereas the lowest DC values were for the 5%- β-TCP group.

Evaluation of carbonate apatite as a bone substitute in rat extraction sockets from the perspective of mesenchymal stem cells.

Carbonate apatite (CO3Ap) is a major inorganic bone component and an effective bone substitute. To clarify the function of CO3Ap, we compared differences among CO3Ap, hydroxyapatite (HAp), and β-tricalcium phosphate (β-TCP) by focusing on mesenchymal stem cells (MSCs) that have a role in wound healing. For in vivo experiments, maxillary molars were removed and the bone substitute was inserted. MSC accumulation around extraction sockets was significantly promoted in CO3Ap and β-TCP groups. For in vitro experiments, MSCs were cultured with bone substitutes. The differentiation potential and amount of calcium deposition were significantly lower in CO3Ap and HAp groups than in the β-TCP group. Increases in insulin-like growth factor-I and vascular endothelial growth factor were found only in the CO3Ap group. CO3Ap-filled extraction sockets accumulated MSCs, and MSCs cultured in the presence of CO3Ap produced large amounts of growth factors. These results suggest that CO3Ap promotes healing of tooth extraction sockets.

Preclinical evaluation of the effect of periodontal regeneration by carbonate apatite in a canine one-wall intrabony defect model.

This study aimed to histologically compare periodontal regeneration of one-wall intrabony defects treated with open flap debridement, β-tricalcium phosphate (β-TCP), and carbonate apatite (CO3Ap) in dogs. The mandibular third premolars of four beagle dogs were extracted. Twelve weeks after the extraction, a one-wall bone defect of 4mm×5mm (mesio-distal width×depth) was created on the distal side of the mandibular second premolar and mesial side of the fourth premolar. Each defect was randomly allocated to open flap debridement (control group), periodontal regeneration utilizing β-TCP, or CO3Ap. Eight weeks after the surgery, histologic and histometric analyses were performed. No ankylosis, infection, or acute inflammation was observed at any of the experimental sites. Newly formed bone and cementum were observed in all experimental groups. The mineral apposition rate of the alveolar bone crest was higher in the CO3Ap group than in the control and β-TCP groups. The ratio of the new bone area was significantly higher in the CO3Ap group than in the control group (P<0.05). The bone contact percentage of the residual granules was significantly higher in the CO3Ap group than in the β-TCP group (P<0.05). Although this study has limitations, the findings revealed the safety and efficacy of CO3Ap for periodontal regeneration in one-wall intrabony defects in dogs, and CO3Ap has a better ability to integrate with bone than β-TCP.

Customized bioceramic scaffolds and metal meshes for challenging large-size mandibular bone defect regeneration and repair.

Large-size mandible graft has huge needs in clinic caused by infection, tumor, congenital deformity, bone trauma and so on. However, the reconstruction of large-size mandible defect is challenged due to its complex anatomical structure and large-range bone injury. The design and fabrication of porous implants with large segments and specific shapes matching the native mandible remain a considerable challenge. Herein, the 6% Mg-doped calcium silicate (CSi-Mg6) and β- and α-tricalcium phosphate (β-TCP, α-TCP) bioceramics were fabricated by digital light processing as the porous scaffolds of over 50% in porosity, while the titanium mesh was fabricated by selective laser melting. The mechanical tests showed that the initial flexible/compressive resistance of CSi-Mg6 scaffolds was markedly higher than that of β-TCP and α-TCP scaffolds. Cell experiments showed that these materials all had good biocompatibility, while CSi-Mg6 significantly promoted cell proliferation. In the rabbit critically sized mandible bone defects (∼13 mm in length) filled with porous bioceramic scaffolds, the titanium meshes and titanium nails were acted as fixation and load bearing. The results showed that the defects were kept during the observation period in the blank (control) group; in contrast, the osteogenic capability was significantly enhanced in the CSi-Mg6 and α-TCP groups in comparison with the β-TCP group, and these two groups not only had significantly increased new bone formation but also had thicker trabecular and smaller trabecular spacing. Besides, the CSi-Mg6 and α-TCP groups showed appreciable material biodegradation in the later stage (from 8 to 12 weeks) in comparison with the β-TCP scaffolds while the CSi-Mg6 group showed much outstanding mechanical capacity in vivo in the early stage compared to the β-TCP and α-TCP groups. Totally, these findings suggest that the combination of customized strength-strong bioactive CSi-Mg6 scaffolds together with titanium meshes is a promising way for repairing the large-size load-bearing mandible defects.

Co-modified 3D printed β-tricalcium phosphate with magnesium and selenium promotes bone defect regeneration in ovariectomized rat

Magnesium (Mg) and Selenium (Se) are essential elements for bone health and have been studied extensively for its powerful osteogenesis and promoting bone regeneration. The purpose was to observe whether Co-modified 3D-printed β-tricalcium phosphate with Mg and Se could promote bone defect regeneration in an ovariectomized(OVX) rat model. The MC3T3-E1 cells were co-cultured with the leachate of β-TCP, Mg-TCP, and Mg/Se-TCP and induced to osteogenesis, and the cell viability, ROS, and osteogenic activity were observed by Cell Count Kit-8(CCK-8), fluorescent probe 2′, 7′-dichlorofluorescin diacetate, Alkaline phosphatase (ALP) staining, Alizarin Red(RES) staining, western blotting(WB), and immunofluorescence. Then the β-TCP, Mg-TCP, and Mg/Se-TCP were implanted into the femoral epiphysis bone defect model of OVX rats for 12 weeks. Micro-CT and histology analysis were used to observe the therapeutic effect. In vitro results show that the cell mineralization and osteogenic activity of the Mg/Se-TCP group is significantly higher than the β-TCP group and Mg-TCP group. Protein expressions such as FOxO1, SIRT1, SOD2, Runx-2, Cola1a, and OC of the Mg/Se-TCP group are significantly higher than the Con group and the β-TCP group. The results of intracellular ROS and SIRT1 and SOD2 immunofluorescence showed that Mg/Se-TCP can restore the oxidative stress balance of osteoblasts. Micro-CT and histology analysis showed that treatment with Mg/Se-TCP showed the largest amount of bone tissue in the defect area (p < 0.05), and exhibited lower values of residual biological material (p < 0.05), compared to that of the β-TCP group and Mg-TCP group. Our research results confirm that Mg/Se-TCP can improve the activity and function of osteoblasts and enhance bone regeneration mediated by reducing intracellular ROS in OVX rat models.Graphical The release of Mg and Se during the degradation of Mg/Se-TCP can improve the local bone repair ability. At the same time, it can also inhibit cell ROS, and ultimately greatly promote local bone repair.

Bioderived amorphous calcium phytate as artificial bone substitute

Calcium phosphates have been widely used in clinics as bone substitutes due to their excellent biocompatibility and similar chemical compositions to bone minerals. The best-known commercial products are hydroxyapatite (HA) and β-tricalcium phosphate (β-TCP), however, their degradation rates do not match well with the formation of new bone, making them somehow unsatisfactory. A degradation rate between these two would be more suitable for bone regeneration and such materials are consistently sought. In this study, we developed a bioderived amorphous calcium phytate (a-CP). Compared with HA and β-TCP, a-CP showed similar effects on proliferation, better effects on differentiation and mineralization of osteogenic related cells. The degradation rate of a-CP fell between β-TCP and HA: In vivo, β-TCP was found to degrade in 4 weeks, while no sign of degradation was observed for HA groups in 8 weeks; the degradation rate of a-CP appeared to be more appropriate. Consequently, a-CP showed better curative effect than both HA and β-TCP in femoral condyle defects: 51±4% of new bone formation was observed on the site of a-CP, while 34±3% and 40±4% of HA and β-TCP groups, respectively. This article is the first to explore the potential of a-CP as a bone substitute, and the in vitro and in vivo performances indicate it to be a promising candidate for bone defect repairing.

Multiple Drilling with Recombinant Human Bone Morphogenetic Protein-2 in Korean Patients with Non-Traumatic Osteonecrosis of the Femoral Head: A Prospective Randomized Pilot Study with a Minimum Two-Year Follow-Up.

We sought to determine whether multiple drilling (MD) combined with the injection of recombinant human bone morphogenetic protein-2 (rhBMP-2) and β-tricalcium phosphate (β-TCP) could improve survival of the femoral head in pre-collapse lesions of non-traumatic osteonecrosis of the femoral head (ONFH) as compared with MD alone. We conducted a single-site, off-label, comparative and prospective cohort study between November 2017 and May 2019. We enrolled 25 hips (25 patients) with non-traumatic ONFH (Ficat–Arlet stage 2A or less). We performed a survival analysis, and the primary outcome was the occurrence of femoral head collapse on follow-up radiograph. Our cohort consisted of 11 men and 9 women of age 52.5 ± 8.8 years and a body mass index of 24.3 ± 3.0 kg/m2. The femoral heads were preserved in 9 hips (45.0%) and collapsed in 11 hips (55.0%) at the final follow-up; mean survival to collapse was 6.9 (range 2.8–13.5) months. There were no significant differences in the survival of the femoral head between the MD alone group and the MD with rhBMP-2 and β-TCP group (five hips survived, 50% vs. four hips survived, 40%, respectively; p = 0.83). MD combined with the injection of rhBMP-2 and β-TCP did not improve femoral head survival compared to MD alone in the pre-collapse non-traumatic ONFH lesion.

A new multiphase calcium phosphate graft material improves bone healing-An in vitro and in vivo analysis.

This study aims to evaluate the potential of a novel biomaterial synthesized from amorphous calcium phosphate (ACP), octacalcium phosphate (OCP), and hydroxyapatite (HA) to repair critical-sized defects (CSD) in rabbit calvaria. In vitro analyses of cell viability, cell proliferation, formation of mineral nodules, and cell differentiation using qPCR were performed for comparing experimental calcium phosphate (ECP), deproteinized bovine bone (DBB), and beta-tricalcium phosphate (β-TCP). Bilateral CSDs were created in 45 rabbit calvaria. Six groups were evaluated: ECP, ECP + fibrin sealant (ECP + S), coagulum, autogenous bone, DBB, and β-TCP. Euthanasia was performed at 2, 4, and 8 weeks, followed by micro-computed tomography and histological and immunohistochemical analyses. Results from in vitro analyses revealed similar biocompatibility for all tested materials and a tendency for higher gene expression of some bone markers in the ECP group than in β-TCP and DBB groups at 7 days. In contrast to that in DBB and β-TCP groups, ECP displayed growing bone volume over total volume percentage (BV/TV%) with time in vivo. Histological analysis revealed a greater number of giant cells and reduced size of grafted particles in ECP during all periods of analysis. RUNX-2 expression was statistically lower in ECP than DBB at 2 and 4 weeks. Despite no statistical significance, ECP presented the highest absolute values for ALP-expression at 2, 4, and 8 weeks compared with other groups. Together, our findings indicate that a combination of the ACP, OCP, and HA phases into ECP is beneficial and promising for bone regeneration.

The Effect of Whitlockite as an Osteoconductive Synthetic Bone Substitute Material in Animal Bony Defect Model.

This study aimed to evaluate the biomechanical properties in vitro and the bone regeneration of whitlockite (WH) compared with hydroxyapatite (HA) or β-tricalcium phosphate (β-TCP)-based material. We investigated the morphology and phase composition of the bone grafts using a scanning electron microscope and X-ray diffractometer patterns and tested the compressive strength. Four circular defects of 8 mm in diameter were created on the calvaria of twelve rabbits. One defect was left empty, and each of the other defects was filled with WH, HA, and β-TCP. At 4 and 8 weeks, the specimens were harvested to evaluate for the new bone formation and the remaining bone grafts. Regarding the biomechanical properties, the three grafts had a similar micropore size, and WH showed nanopores. The compressive strength of WH was higher than HA and β-TCP without statistical significance. The radiological and histomorphometric analyses demonstrated that the new bone formation was similar among the groups. The remaining bone graft of the WH group was greater than that of the HA and β-TCP groups at 4 weeks (p < 0.05), and the total bone area of the WH, HA, and β-TCP groups was greater than that of the other (p < 0.01). WH has excellent volumetric stability and osteoconductivity compared with HA and β-TCP.

Three-dimensional volumetric changes of 5 different bone grafts in human maxillary sinuses reconstruction: a randomized clinical study.

This study aimed to compare the three-dimensional volumetric changes of human maxillary sinuses after reconstruction using 5 different bone grafts. Patients underwent unilateral maxillary sinus bone height reconstruction using 5 bone substitutes allocated in different groups as follows: group 1 was grafted with autogenous bone graft alone; group 2 with beta-tricalcium phosphate (β-TCP); group 3 with β-TCP + autogenous bone graft 1:1; group 4 with bioactive glass; and group 5 with bioactive glass + autogenous bone graft 1:1. The patients were submitted to cone beam computed tomography in two periods: 15 days after the surgical procedure (T1) and after 6 months (T2). The results were evaluated as the formula T2-T1 expressing the three-volumetric changes of the biomaterials in elapsed time. The resorption rate of autogenous bone graft was -630.699 ± 300.9 mm3; in the β-TCP group, it was -315.772 ± 125.6 mm3; in the group with β-TCP + autogenous bone graft 1:1, it was -336.205 ± 195.7 mm3; and in groups with bioactive glass and with the addition of autogenous bone graft 1:1, it was -428.878 ± 311.6 mm3 and -576.917 ± 471.6 mm3, respectively, without statistical difference (p = 0.167). Pearson's correlated test revealed a strong correlation as well as a progressive resorption of the grafts during bone healing. The similar outcomes for the three-dimensional volumetric changes using the bone substitutes evaluated after 6 months of bone healing suggest that all these grafts can be performed to maxillary sinus reconstruction.

Faster bone union progression and less sclerosis at the osteotomy margin after medial opening-wedge high tibial osteotomy using highly porous β-tricalcium phosphate granules versus allogeneic bone chips: A matched case–control study

BackgroundThis study compared bone union progression using highly porous (80% porosity) β-tricalcium phosphate (β-TCP) granules or allogeneic bone chips in the gap created by medial opening-wedge high tibial osteotomy (MOWHTO). MethodsThe study population consisted of 54 patients who received MOWHTO with locking plate fixation: 27 patients using highly porous β-TCP granules, and 27 age- and sex-matched patients using allogeneic bone chips. Bone union progression was evaluated 1, 3, 6, and 12 months postoperatively. The presence of radiographic sclerosis at the osteotomy margin was also assessed. ResultsAmong all patients, the highest degree of bone union observed 12 months postoperatively was grade 4. As postoperative time passed, bone union progression of highly porous β-TCP granules increased linearly and was statistically significant compared with that of cancellous allogeneic bone chips (P = 0.014). The presence of radiographic sclerosis at the osteotomy margin was significantly less common in the β-TCP group than in the allograft group (P = 0.003) and was the strongest predictor of delayed progress of bone union (odds ratio = 6.16, P = 0.006). ConclusionsPatients who underwent MOWHTO using highly porous β-TCP granules had faster new bone remodeling, less radiographic sclerosis at the osteotomy margin, and no inferior clinical outcome compared with allogeneic bone chips, as determined at the 1-year follow up. The presence of radiographic sclerosis at the osteotomy margin in patients undergoing MOWHTO using allogeneic bone or synthetic bone substitute may indicate delayed progress of bone union.

How much platelet-rich plasma can be soak-loaded onto beta-tricalcium phosphate? A comparison with or without a unidirectional porous structure.

Objective: This study aimed to examine differences in platelet-rich plasma (PRP) soak-loaded volumes of β-tricalcium phosphate (β-TCP) with or without a unidirectional porous structure.Materials and Methods: Leukocyte-rich PRP was extracted from 15 healthy volunteers by centrifugation. Two types of artificial bones were soaked for either ten seconds or ten minutes. The volume ratios of PRP soak-loaded onto the artificial bone and soaked area ratios were evaluated. Statistical analyses were performed using the Tukey-Kramer HSD test and the Games-Howell method. A P-value of <0.05 was considered statistically significant.Results: Regardless of the soaking time, the PRP soak-loaded volume ratio and soaked area ratio were significantly higher in the unidirectional porous β-TCP (UDPTCP) group than in the spherical porous β-TCP (SPTCP) group.Conclusion: PRP can be soak-loaded faster and in larger amounts onto UDPTCP compared to SPTCP. Understanding the basic biology of β-TCP soak-loaded with PRP can help develop more novel and effective β-TCP treatments for orthopedic surgery.

Thermal treatment at 500 °C significantly reduces the reaction to irregular tricalcium phosphate granules as foreign bodies: An in vivo study

Evaporation of phosphate species during thermal treatment (> 400 °C) of calcium phosphates leads to the formation of an alkaline layer on their surface. The aim of this study was to evaluate the hypothesis that the biological response of thermally treated calcium phosphates is modified by the presence of such an alkaline layer on their surface. For this purpose, 0.125–0.180 mm α- and β-tricalcium phosphate (TCP) granules were obtained by crushing and size classification, with some being subjected to thermal treatment at 500 °C. The four types of granules (α-TCP, β-TCP, α-TCP-500 °C, and β-TCP-500 °C) were implanted subcutaneously and orthotopically in rats. Sham operations served as control.Subcutaneously, α-TCP and β-TCP induced significantly more multinucleated giant cells (MNGCs) than calcined granules. Most of the induced MNGCs were TRAP-negative, CD-68 positive and cathepsin K-negative, reflecting a typical indication of a reaction with a foreign body. The vessel density was significantly higher in the α-TCP and β-TCP groups than it was in the α-TCP-500 °C and β-TCP-500 °C groups. In the femur model, β-TCP-500 °C induced significantly more new bone formation than that induced by β-TCP. The granule size was also significantly larger in the β-TCP-500 °C group, making it more resistant to degradation than β-TCP. The MNGC density was higher in the α-TCP and β-TCP groups than in the α-TCP-500 °C and β-TCP-500 °C groups, including cathepsin-positive, CD-68 positive, TRAP-positive and TRAP-negative MNGCs.In conclusion, this study confirms that the biological response of calcium phosphates was affected by the presence of an alkaline layer on their surface. Thermally-treated α-TCP and β-TCP granules produced significantly fewer MNGCs and were significantly less degraded than non-thermally-treated α-TCP and β-TCP granules. Thermally treating α-TCP and β-TCP granules shifts the reaction from a foreign body reaction towards a physiological reaction by downregulating the number of induced MNGCs and enhancing degradation resistance.

3D Printing of Bone-Mimetic Scaffold Composed of Gelatin/β-Tri-Calcium Phosphate for Bone Tissue Engineering.

3D printed scaffolds composed of gelatin and β-tri-calcium phosphate (β-TCP) as a biomimetic bone material are fabricated, thereby providing an environment appropriate for bone regeneration. The Ca2+ in β-TCP and COO- in gelatin form a stable electrostatic interaction, and the composite scaffold shows suitable rheological properties for bioprinting. The gelatin/β-TCP scaffold is crosslinked with glutaraldehyde vapor and unreacted aldehyde groups which can cause toxicity to cells is removed by a glycine washing. The stable binding of the hydrogel is revealed as a result of FTIR and degradation rate. It is confirmed that the composite scaffold has compressive strength similar to that of cancellous bone and 60wt% β-TCP groups containing 40wt% gelatin have good cellular activity with preosteoblasts. Also, in the animal experiments, the gelatin/β-TCP scaffold confirms to induce bone formation without any inflammatory responses. This study suggests that these fabricated scaffolds can serve as a potential bone substitute for bone regeneration.

Aspirin modified strontium-doped β-tricalcium phosphate can accelerate the healing of femoral metaphyseal defects in ovariectomized rats

The purpose was to observe whether local administration Strontium (Sr) and Aspirin (Asp) can enhance the efficacy of β-Tricalcium phosphate(β-TCP) in the treatment of osteoporotic bone defect. The MC3T3-E1 cells were co-cultured with β-TCP, Sr/β-TCP, Asp-Sr/β-TCP scaffold and induced to osteogenesis, and the cell viability, mineralization ability were observed by MTT, Alizarin Red staining(ARS) and Western blotting(WB). Then this scaffolds were implanted into the femoral epiphysis bone defect model of ovariectomized(OVX) rats for 8 weeks. X-ray, Micro-CT, histology and Reverse transcription-quantitative polymerase chain reaction (RT-qPCR) analysis were used to observe the therapeutic effect and explore the possible mechanism. MTT, ARS results show that the cell mineralization and viability of Asp-Sr/β-TCP group is significantly higher than Control group, β-TCP group and Sr/β-TCP group. Protein expression show that the osteogenic protein expression such as ALP、OP、RUNX-2、OC and COL-1 of Asp-Sr/β-TCP group is significantly higher than Control group, β-TCP group and Sr/β-TCP group. X-ray images, Micro-CT and Histological analysis evaluation show that, group Asp-Sr/β-TCP presented the strongest effect on bone regeneration and bone mineralization, when compared with β-TCP group and Sr/β-TCP group. RT-qPCR analysis show that Asp-Sr/β-TCP, β-TCP group and Sr/β-TCP group showed increased BMP2, Smad1, OPG than the OVX group(p < 0.05), while Asp-Sr/β-TCP exhibited decreased TNF-α、IFN-γ and RANKL than the OVX group(p < 0.05). Our current study demonstrated that Asp-Sr/ β-TCP is a scheme for rapid repair of femoral condylar defects, and these effects may be achieved by inhibiting local inflammation and through BMP-2/Smad1 and OPG/RANKL signaling pathway.

Efficacy of ankaferd blood stopper on healing after osseous grafting in the treatment of periodontal intrabony defects.

Abstract Objective: Periodontal diseases are multifactorial infections lead to destruction of the periodontal. The present study was designed to verify effect of ABS in conjunction with β-TCP on healing in the treatment of periodontal intrabony defects. Subjects and Methods: A total of 20 intrabony periodontal defects were treated in ten patients with Periodontal pocket depth ≥ 6 mm and radiographic osseous defect depth ≥ 4 mm, Interventional split mouth; 1st group (control group) Ten defects were treated by β-TCP and 2nd group (Test group) Ten defects were treated by (mixing 0.5 ml of ABS with β-TCP ). Phase I therapy was performed for all chosen patients to provide an oral environmental more favorable to wound healing. The following clinical indices measurements Plaque index, Gingival index, Periodontal pocket depth and Clinical attachment level. All indices were recorded at baseline, 6 and 12 months after surgery. The following Radiographic measurements bone density, M-D width of the defect and depth of the defect were recorded at baseline, 6 and 12 months after surgery under constant conditions. Results: β-TCP/ABS group showed a less mean plaque index, gingival index, clinical attachment loss, M-D width of the defect and depth of the defect and a high mean bone density than β-TCP group. Conclusion: Both treatment modalities demonstrated good standards of oral hygiene, with minimal inflammatory signs around teeth‏ and minimal marginal ‎bone loss. ABS combined with a synthetic bone graft may enhance the healing and regenerative processes and lead to more bone fill.