Use Of Quantum Dots Research Articles

Layered Double Hydroxide Quantum Dots for Use in a Bifunctional Separator of Lithium-Sulfur Batteries.

Functional separators, which are chemically modified and coated with nanostructured materials, are considered an effective and economical approach to suppressing the shuttle effect of lithium polysulfide (LiPS) and promoting the conversion kinetics of sulfur cathodes. Herein, we report cobalt-aluminum-layered double hydroxide quantum dots (LDH-QDs) deposited with nitrogen-doped graphene (NG) as a bifunctional separator for lithium-sulfur batteries (LSBs). The mesoporous LDH-QDs/NG hybrids possess abundant active sites of Co2+ and hydroxide groups, which result in capturing LiPSs through strong chemical interactions and accelerating the redox kinetics of the conversion reaction, as confirmed through X-ray photoelectron spectroscopy, adsorption tests, Li2S nucleation tests, and electrokinetic analyses of the LiPS conversion. The resulting LDH-QDs/NG hybrid-coated polypropylene (LDH-QDs/NG/PP) separator, with an average thickness of ∼17 μm, has a high ionic conductivity of 2.67 mS cm-1. Consequently, the LSB cells with the LDH-QDs/NG/PP separator can deliver a high discharge capacity of 1227.48 mAh g-1 at 0.1C along with a low capacity decay rate of 0.041% per cycle over 1200 cycles at 1.0C.

In vitro toxicity assessment of fungal-synthesized cadmium sulfide quantum dots using bacteria and seed germination models

There is currently controversy over the use of quantum dots (QDs) in biological applications due to their toxic effects. Therefore, the purpose of the present study was to evaluate the toxic effect of chemical and biogenic (synthesized by Fusarium oxysporum f. sp. lycopersici) cadmium sulfide quantum dots (CdSQDs) using a bacterial model of Escherichia coli and sprouts of Lactuca sativa L. with the aim to foresee its use in the near future in biological systems. Physicochemical properties of both types of CdSQDs were determined by TEM, XRD, zeta potential and fluorescence spectroscopy. Both biogenic and chemical CdSQDs showed agglomerates of spherical CdSQDs with diameters of 4.14 nm and 3.2 nm, respectively. The fluorescence analysis showed a band around 361 nm in both CdSQDs, the zeta potential was −1.81 mV for the biogenic CdSQDs and −5.85 mv for the chemical CdSQDs. Results showed that chemical CdSQDs, presented inhibition in the proliferation of E. coli cell in a dose-dependent manner, unlike biogenic CdSQDs, that only at its highest concentration showed an antibacterial activity. Also, it was observed that after incubation with chemical and biogenic CdSQDs of L. sativa L. seeds, only the biogenic CdSQDs showed no inhibition on seed germination. In summary, our results suggest that the production route has a significant effect on the toxicity of QDs; in addition, it seems that the biological coating of the CdSQDs from F. oxysporum f. sp. lycopersici inhibit their toxic effect on bacterial strains and plant seeds.

Triplet Sensitization and Photon Upconversion Using InP-Based Quantum Dots.

Molecular triplet sensitization using colloidal semiconductor nanocrystals or quantum dots (QDs) is important for many photochemical and photonic applications. Current QD sensitizers often contain toxic elements such as Cd and Pb. In order to "go green" with these sensitizers, we investigate triplet energy transfer from InP-based QDs. Time-resolved spectroscopy studies revealed picosecond hole trapping in core-only QDs, which could complicate and/or inhibit energy transfer. We therefore developed InP/ZnSe/ZnS core/shell QDs that effectively suppressed hole trapping and meanwhile allowed for triplet energy transfer to surface-anchored anthracene acceptors with an efficiency of 84%. The sensitized molecular triplets participated in triplet-triplet-annihilation, enabling photon upconversion with a normalized quantum yield reaching 10.0% ± 0.1%. This study demonstrates that nontoxic InP-based QDs can be engineered to be on par with state-of-the-art Cd- or Pb-containing QDs for use as triplet sensitizers.

Business Roundup

BUSINESS Business Roundup ShareShare onFacebookTwitterWechatLinked InRedditEmail C&EN, 2020, 98 (32), p 15August 24, 2020Cite this:C&EN 98, 32, 15Abstractand BASF are closing their jointly owned 1,4-butanediol plant at Idemitsu’s complex in Chiba, Japan. They will dissolve their joint venture, and BASF will supply Japanese butanediol customers from its plants elsewhere in the world. will double capacity for Uvinul A Plus, an ingredient that provides UVA protection in skin-care formulations, by building a plant in Kaohsiung, Taiwan. The additional capacity, which will complement BASF’s current production line in Ludwigshafen, Germany, is set to open in mid-2022. has picked Norway’s Herøya Industrial Park as the site for a possible large-scale battery graphite plant. The company expects demand for graphite for battery anodes to increase more than 10 times by 2030. has raised $20 million in funding from undisclosed investors to expand capacity for quantum dots. The firm is pursuing use of quantum dots in agricultural films in addition to their use in displays. , a developer of 3-D printable carbonView: PDF | Full Text HTML

Beyond DNA-targeting in Cancer Chemotherapy. Emerging Frontiers - A Review.

Modern anti-cancer drugs target DNA specifically for rapid division of malignant cells. One downside of this approach is that they also target other rapidly dividing healthy cells, such as those involved in hair growth leading to serious toxic side effects and hair loss. Therefore, it would be better to develop novel agents that address cellular signaling mechanisms unique to cancerous cells, and new research is now focussing on such approaches. Although the classical chemotherapy area involving DNA as the set target continues to produce important findings, nevertheless, a distinctly discernible emerging trend is the divergence from the cisplatin operation model that uses the metal as the primary active center of the drug. Many successful anti-cancer drugs present are associated with elevated toxicity levels. Cancers also develop immunity against most therapies and the area of cancer research can, therefore, be seen as an area with a high unaddressed need. Hence, ongoing work into cancer pathogenesis is important to create accurate preclinical tests that can contribute to the development of innovative drugs to manage and treat cancer. Some of the emergent frontiers utilizing different approaches include nanoparticles delivery, use of quantum dots, metal complexes, tumor ablation, magnetic hypothermia and hyperthermia by use of Superparamagnetic Iron oxide Nanostructures, pathomics and radiomics, laser surgery and exosomes. This review summarizes these new approaches in good detail, giving critical views with necessary comparisons. It also delves into what they carry for the future, including their advantages and disadvantages.

How microbial biofilms impact the interactions of Quantum Dots with mineral surfaces?

The increasing use of Quantum Dots (QDs) - nanoparticles exhibiting unique optical properties – and their incorporation in multiple engineering products is likely to result in the release of this new class of contaminants into natural systems. In soils, bacterial biofilms and mineral surfaces form highly reactive interfaces, which may control QDs' environmental fate. However, little is known regarding QDs' stability in, and modes of interactions with, biofilm/mineral interfaces. This study examines the interactions, distributions and stability of thioglycolic acid-capped CdSe/ZnS QDs at the corundum (α-Al2O3)/Shewanella oneidensis MR-1 interface, for exposure times ranging between 1 h to 24 h. Long Period – X-ray Standing Wave – Fluorescence Yield spectroscopy and Grazing Incidence – X-ray Absorption Spectroscopy were used. Results indicate increases in Zn and Se concentrations within the biofilm/crystal system with time, demonstrating its high accumulation capacity over 24 h. In addition, dissolution of a part of the ZnS shell occurs within 1 h, highlighting the potential degradation of QDs when exposed to the biofilm/crystal compartment. Once released, Zn(II) migrates toward the biofilm-crystal interface and interacts preferentially with the crystal surface. In contrast, the remaining CdSe core is mostly preserved, and stays within the biofilm thickness. However, at 24 h, Se and Zn present similar distribution profiles indicating a general reduction in ZnS shell dissolution at this longer exposure time.

Design of Selective Reflectors Utilizing Multiple Scattering by Core–Shell Nanoparticles for Color Conversion Films

The use of quantum dots (QDs) and other nanosized conversion materials becomes increasingly important in display applications owing to their easily tunable and narrow emission spectra. When excited...

Use of IHF-QD Microscopic Analysis for the Detection of Food Allergenic Components: Peanuts and Wheat Protein.

The aim of the study was to analytically evaluate quantum dots in immunohistofluorescence (IHF-QD) microscopic imaging as detectors of food allergens—peanut and wheat. The experiment was designed as two in silico experiments or simulations: (a) models of pastry samples were prepared with the addition of allergenic components (peanut and wheat protein components) and without the addition of allergenic components, and (b) positive and negative commercial samples underwent food allergen detection. The samples from both simulations were tested by the ELISA and IHF-QD microscopic methods. The primary antibodies (secondary antibodies to a rabbit Fc fragment with labeled CdSe/ZnS QD) were labelled at 525, 585, and 655 nm emissions. The use of quantum dots (QDs) has expanded to many science areas and they are also finding use in food allergen detection, as shown in the study. The study indicated that differences between the ELISA and IHF-QD microscopic methods were not observable among experimentally produced pastry samples with and without allergenic components, although differences were observed among commercial samples. The important value of the study is certainly the differences found in the application of different QD conjugates (525, 585, and 655). The highest contrast was found in the application of 585 QD conjugates that can serve for the possible quantification of present food allergens—peanuts and wheat. The study clearly emphasized that QD can be used for the qualitative detection of food allergens and can represent a reliable analytical method for food allergen detection in different food matrixes.

Single-excited double-emission CdTe@CdS quantum dots for use in a fluorometric hybridization assay for multiple tumor-related microRNAs.

A method is described for the simultaneous determination of hepatocellular carcinoma-associated microRNA-122 and microRNA-199a/b-3p. This probe consists of two kinds of nanomaterials. The first comprises CdTe@CdS core-shell quantum dots which, on excitation at 375nm give two emissions, with peak wavelengths at 543 (g-QDs) and at 627nm (r-QDs). The second comprises gold nanoparticles acting as a quencher. In the absence of the target, g-QD-N1 and r-QD-N2 are stable due to the fluorescence stability. With the addition of microRNA-122 and microRNA-199a/b-3p, g-QD-N1 and r-QD-N2 are conjugated to the surface of AuNP-S1/S2 through base complementary pairing. As a result, fluorescence resonance energy transfer (FRET) occurs, resulting in a decrease at 550nm and 635nm respectively, which can realize the simultaneous detection of two different microRNAs. Detection is achieved within 50min. The detection limits (3σ/k) are 0.2nM for microRNA-122 and 0.5nM for microRNA-199a/b-3p. The clinical applicability of the assay was demonstrated by detecting microRNAs in human serum and different cell lysates. Graphical abstractSchematic for the simultaneous determination of microRNA-122 and microRNA-199a/b-3p by FRET.

Functional imaging of a model unicell: Spironucleus vortens as an anaerobic but aerotolerant flagellated protist.

Advances in optical microscopy are continually narrowing the chasm in our appreciation of biological organization between the molecular and cellular levels, but many practical problems are still limiting. Observation is always limited by the rapid dynamics of ultrastructural modifications of intracellular components, and often by cell motility: imaging of the unicellular protist parasite of ornamental fish, Spironucleus vortens, has proved challenging. Autofluorescence of nicotinamide nucleotides and flavins in the 400-580nm region of the visible spectrum, is the most useful indicator of cellular redox state and hence vitality. Fluorophores emitting in the red or near-infrared (i.e., phosphors) are less damaging and more penetrative than many routinely employed fluors. Mountants containing free radical scavengers minimize fluorophore photobleaching. Two-photon excitation provides a small focal spot, increased penetration, minimizes photon scattering and enables extended observations. Use of quantum dots clarifies the competition between endosomal uptake and exosomal extrusion. Rapid motility (161μm/s) of the organism makes high resolution of ultrastructure difficult even at high scan speeds. Use of voltage-sensitive dyes determining transmembrane potentials of plasma membrane and hydrogenosomes (modified mitochondria) is also hindered by intracellular motion and controlled anesthesia perturbs membrane organization. Specificity of luminophore binding is always questionable; e.g. cationic lipophilic species widely used to measure membrane potentials also enter membrane-bounded neutral lipid droplet-filled organelles. This appears to be the case in S. vortens, where Coherent Anti-Stokes Raman Scattering (CARS) micro-spectroscopy unequivocally images the latter and simultaneous provides spectral identification at 2840cm-1. Secondary Harmonic Generation highlights the highly ordered structure of the flagella.

Absolute and Relative Methods for Fluorescence Quantum Yield Evaluation of Quantum Dots.

Optical spectroscopy techniques are crucial for the evaluation and use of quantum dots (QDs) in life and materials science. In that context, the fluorescence quantum yield (Φf) is an essential parameter in the assessment of the luminescent features of QDs. The fluorescence quantum yield can be defined as the ratio of the number of emitted photons to the number of absorbed photons by a luminescent material. In this chapter, we describe absolute and relative methods to measure the fluorescence quantum yield of QDs in solution phase. The advantages and limitations of the techniques are reviewed.

Amplified light harvesting for enhancing Italian lettuce photosynthesis using water soluble silicon quantum dots as artificial antennas.

Maximizing the utilization of the ultraviolet portion in the solar radiation spectrum has always been a goal for plant growth in order to minimize the harm and harvest the benefits. For this reason, fluorescent, amine-functionalized, and water-soluble silicon quantum dots (SiQDs) were fabricated with a mono-dispersed size of 2.4 nm. The SiQDs were used as artificial antennas to amplify the light harvesting ability and consequently enhance the photosynthesis in Italian lettuce. Upon ultraviolet excitation, the intense blue emission from the quantum dots matched very well to the absorption of the chloroplasts, allowing for the ultraviolet portion in solar radiation to be effectively utilized. The consumed optical energy enhanced the photosystem II activity, which made the amplification of photosynthesis possible. More importantly, in vivo, the quantum dots significantly promoted Italian lettuce seedling growth at concentrations below 30 mg L-1 on the root length, seedling height, and biomass by increasing the soluble sugar and water content by 49.8% and 40.9%, respectively. Interestingly, the chlorophyll a and b content increased to 41.0 and 114.8%, respectively, with no inhibition, even at the highest dose of 200 mg L-1. This study provides a new perspective on the use of quantum dots to amplify the utilization of ultraviolet light in agriculture.

Photobleaching of Phthalocyanine Molecules within a Complex with Colloidal Quantum Dots

Fluorescent nanoparticles are currently considered as promising enhancers of photodynamic activity of traditional photosensitizers in procedures for photodynamic therapy of cancer and inactivation of pathogens. On the one hand, such nanoparticles act as a nanoplatform for target delivery of dye molecules to cells; on the other hand, they act as light-harvesting antennas that increase the effective absorption cross-section of the dye. This paper investigates the effect of semiconductor CdSe/ZnS quantum dots coated with a polymer shell on the photostability of zinc or aluminum polycationic phthalocyanines. It was shown that the rate of photobleaching of phthalocyanines increases significantly in the presence of quantum dots both under direct illumination of phthalocyanine by red light and under the quantum dot-mediated illumination by blue light. This effect can be explained by the fact that phthalocyanine inside the polymer shell of the quantum dot is the primary target for the attack by reactive oxygen species. The rate of bleaching of the chemical trap of reactive oxygen species, 4-nitroso-N,N-dimethylaniline, in a phthalocyanine solution increases in the presence of the quantum dot under red light illumination. We believe that the chemical trap is concentrated in the polymer shell of the quantum dot, which increases the probability of its damage by active oxygen species generated by phthalocyanine. Since the diffusion of reactive oxygen species from the polymer shell of the nanoparticle into the surrounding solution is slow, the use of quantum dots as an enhancer of the photodynamic action of phthalocyanines can be effective only in the absence of significant steric obstacles to the diffusion of reactive oxygen species to the target molecules of photodynamic inactivation.

The fate of CdS quantum dots in plants as revealed by extended X-ray absorption fine structure (EXAFS) analysis

The use of quantum dots (QDs) is widespread and as such, the potential risk associated with their dispersion in the environment has stimulated research on their interaction with potential sensitive receptors.

Photoactivable Polymers Embedded with Cadmium-Free Quantum Dots and Crystal Violet: Efficient Bactericidal Activity against Clinical Strains of Antibiotic-Resistant Bacteria.

The rising incidence of antibiotic-resistant infections from contaminated surfaces in hospitals or implanted medical devices has led to increasing interest in new antibacterial surfaces. Photoactivatable surfaces that can generate cytotoxic reactive oxygen species under exposure to ambient light is a promising approach to inactivation of surface-borne microorganisms. There is growing interest in the use of quantum dots (QDs) as light-harvesting agents for photobactericidal applications, but the cadmium in commonly used QDs will restrict clinical application. Herein, the photobactericidal activity of novel polyurethane substrates containing cadmium-free QDs was tested against clinical multidrug-resistant Gram-positive and Gram-negative bacterial strains: methicillin-resistant Staphylococcus aureus (MRSA) and a carbapenemase-producing strain of Escherichia coli ( E. coli). To enhance the capacity for reactive oxygen species generation, QDs were incorporated into the polymer with a photosensitizing dye, crystal violet. Close proximity between the QD and dye enables electron and energy transfer processes leading to generation of cytotoxic singlet oxygen and superoxide radicals. A QD solution in cyclohexane was premixed with a solution of CV in the more polar solvent, dichloromethane, to promote the formation of QD-CV nanocomposite complexes via CV adsorption. This solution was then used to embed the QDs and crystal violet into medical grade polyurethane via swell-encapsulation. The combination of QD and CV elicited significant synergistic antibacterial activity under visible light against MRSA within 1 h (99.98% reduction) and E. coli within 4 h (99.96% reduction). Photoluminescence lifetime and singlet oxygen phosphorescence measurements demonstrated that interaction between the QDs and the crystal violet occurs within the polymer and leads to enhanced generation of reactive oxygen species. Strong inhibition of kill was observed using the superoxide scavenger, superoxide dismutase. The efficacy of these QD-CV polymer substrates, that can harvest light across the visible spectrum, against multidrug-resistant bacteria demonstrates the feasibility of this approach.

Ecotoxicology impact of silica-coated CdSe/ZnS quantum dots internalized in Chlamydomonas reinhardtii algal cells

The use of quantum dots (QD) in various medical and industrial applications may cause these nanoparticles to leak into waterways and subsequently enter the food chain. Therefore, if we intend to use QD, we must first know their potential environmental implications. In this work, cadmium selenide/zinc sulfide core/shell QD were synthesized, and then, biocompatible, water-dispersed QD were coated with silica (Si-QD). The QD were characterized by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM) combined with energy-dispersive X-ray spectroscopy (EDX), and UV–Vis absorption analysis, which revealed that these surface-engineered QD have a highly crystalline, homogeneous spherical shape measuring approximately 25 nm. The cytotoxicity of the nanoparticles in the green algae Chlamydomonas reinhardtii was studied by incubating the algae cells with Si-QD and determining the optical density of algal cell culture, cell counts, and cells sizes by microflow cytometry. These measurements indicated that Si-QD are biocompatible up to a concentration of 25 ng/ml. Finally, the cellular uptake of Si-QD into C. reinhardtii was monitored by confocal laser scanning microscopy (CLSM). In conclusion, our results reveal that surface-engineered Cd-QD can penetrate the cells of aquatic organisms, which ensures a serious impact on the food chain and consequently the environment. On the other hand, the results also highlight a new potential method for bioremediation of Cd-QD by green algae, especially C. reinhardtii.

Synthesis of N,S-Doped Carbon Quantum Dots for Use in Organic Solar Cells as the ZnO Modifier To Eliminate the Light-Soaking Effect.

Zinc oxide (ZnO) is one of the most extensively used electron-transporting layers (ETLs) in organic solar cells. However, owing to numerous surface defects and mismatched energy bands with the photoactive layer, light-soaking process is usually required to achieve a high device performance for the ZnO-based cells. Herein, we reported the synthesis of N,S-doped carbon quantum dots (N,S-CQDs) by a simple hydrothermal treatment using ascorbic acid and ammonium persulfate as reagents. As characterized by high-resolution transmission electron microscopy and X-ray diffraction, the synthesized CQDs were found to be 2-7 nm in dimensions, having a graphite-structured core and amorphous carbon on the shell. Fourier transform infrared and X-ray photoelectron spectroscopy analyses confirmed that these CQDs are highly nitrogen- and sulfur-doped, which leads to efficient (with a quantum yield of 33%) downconversion and excitation-dependent photoluminescence character. Application of these N,S-CQDs as surface modifier for ZnO layer in inverted organic solar cells was investigated. Results indicate that the cells with N,S-CQDs-decorated ZnO ETL showed higher power conversion efficiency without S-shaped kink in the current density-voltage curves. The performance improvement and the elimination of light-soaking effect for ZnO:N,S-CQDs cells are attributed to the ZnO surface defect passivation by N,S-CQDs, as confirmed by fluorescence spectroscopy and scanning Kelvin probe microscopy. The cells with N,S-CQDs-modified ZnO ETL showed a high power conversion efficiency of 9.31%, which is higher than the reference ZnO cells. The current work provides a feasible way to achieve shell element-doped CQDs for specific application in organic electronic devices.

Design and photophysical insights on graphene quantum dots for use as nanosensor in differentiating methamphetamine and morphine in solution.

Fluorescent graphene quantum dots (GQDs) were prepared and utilized as nanosensor for differentiation and determination of two most common narcotic drugs i.e. morphine and methamphetamine. The microstructure and optical properties of the GQDs were investigated by various physicochemical methods. XRD analysis indicated low crystalline nature, demonstrating the graphitic nature of the GQDs. According to the Tauc plot derived from UV-Vis spectrum, the optical band gap of the GQDs was determined to ~4.98 eV, assigned to the n-π* transitions. Cyclic voltammetry analysis of the GQDs determined electrochemical band gap of ~4.88 eV with HOMO and LUMO energies equal to -6.83 eV and -1.95 eV, respectively. The GQDs were employed as fluorescent sensing probe for determination of morphine and methamphetamine. The blue fluorescence of the prepared GQDs under the excitation at 362 nm was quenched in the presence of methamphetamine and enhanced in the presence of morphine. The detection limits of 1.48 and 0.5 μg/ml were found for methamphetamine and morphine, respectively. This inexpensive sensing system shows some advantages such as short response time (t < 1 min) and low detection limit as well as nontoxicity.

Effective Neural Photostimulation Using Indium-Based Type-II Quantum Dots.

Light-induced stimulation of neurons via photoactive surfaces offers rich opportunities for the development of therapeutic methods and high-resolution retinal prosthetic devices. Quantum dots serve as an attractive building block for such surfaces, as they can be easily functionalized to match the biocompatibility and charge transport requirements of cell stimulation. Although indium-based colloidal quantum dots with type-I band alignment have attracted significant attention as a nontoxic alternative to cadmium-based ones, little attention has been paid to their photovoltaic potential as type-II heterostructures. Herein, we demonstrate type-II indium phosphide/zinc oxide core/shell quantum dots that are incorporated into a photoelectrode structure for neural photostimulation. This induces a hyperpolarizing bioelectrical current that triggers the firing of a single neural cell at 4 μW mm–2, 26-fold lower than the ocular safety limit for continuous exposure to visible light. These findings show that nanomaterials can induce a biocompatible and effective biological junction and can introduce a route in the use of quantum dots in photoelectrode architectures for artificial retinal prostheses.

Three-dimensional carbon nanotube yarn based solid state solar cells with multiple sensitizers exhibit high energy conversion efficiency

Fiber-type dye sensitized solar cells that are non-metallic, flexible, and thread-like in structure have many potential military and functional textile applications. With the use of quantum dots (QD), exciton transfer facilitators (Phenyl-C61-butyric acid methyl ester-PCBM) and Poly(3-hexylthiophene-2,5-diyl-P3HT), and careful preparation of the TiO2 oxide layer deposited on the carbon fiber working electrode, an optimized efficiency of 7.6% was obtained. Carbon nanotube yarn (CNTY) was used to prepare both the working and counter electrodes of the fabricated cells. TiCl4 annealing of the TiO2 layer was carried out and the resulting oxide layer morphology was found to be very uniform. The quantum dots, cadmium sulfide (CdS) and cadmium selenide (CdSe), were deposited directly onto the surface of the nanoporous oxide layer using chemical bath deposition (CBD). Also, the P3HT and PCBM were applied and deposited via CBD on the working electrode as a bulk heterojunction material. Potentiometric characterization of the prepared cells performed at different cell lengths and showed that the maximum efficiency was obtained for cells approximately 3.5 cm in length. Photovoltaic performance of these solid state three dimensional cells was also carried out for different cell configurations.