Use Of Prosthesis Research Articles

Dislocation of primary total hip arthroplasty: Analysis of risk factors and preventive options.

Total hip arthroplasty (THA) is one of the most successful elective operations in orthopedic surgery for improving pain and functional disability in patients with end-stage joint disease. However, dislocation continues to be a troublesome complication after THA, as it is a leading cause of revision and is associated with substantial social, health, and economic costs. It is a relatively rare, usually early occurrence that depends on both the patients' characteristics and the surgical aspects. The most recent and important finding is the special attention to be given preoperatively to spinopelvic mobility, which is closely related to the incidence of dislocation. Consequently, clinical and radiographic assessment of the lumbar spine is mandatory to identify an altered pelvic tilt that could suggest a different positioning of the cup. Lumbar spinal fusion is currently considered a risk factor for dislocation and revision regardless of whether it is performed prior to or after THA. Surgical options for its treatment and prevention include the use of prostheses with large diameter of femoral head size, dual mobility constructs, constrained liners, and modular neck stems.

Three-dimensional printing technology applied to the production of prosthesis: A systemic narrative review.

The purpose of this scoping review was to investigate the effects of 3-dimensional (3D)-printed prostheses. Articles published up to August 19, 2023, were searched in the PubMed, Cochrane Library, Embase, and Scopus databases. The search terms used were "3D printed prosthesis," "3D printed prostheses," "3D printed prosthe*," "3D printed artificial arm," "3D printed artificial leg," "3D printing prosthesis," "3D printing prostheses," "3D printing prosthe*," "3D printing artificial arm," and "3D printing artificial leg." This review included studies that applied 3D-printed prostheses to upper- or lower-limb amputees. Case reports, conference abstracts, presentations, reviews, and unidentified articles were excluded from the analysis. A total of 937 articles were identified, 11 of which were included after confirming eligibility through the title, abstract, and full text. The results indicated that the 3D-printed prostheses demonstrated the ability to substitute for the functions of impaired limbs, similar to conventional prostheses. Notably, the production cost and weight were reduced compared with those of conventional prostheses, increasing patient satisfaction. The use of 3D-printed prostheses is expected to gain prominence in future clinical practice. However, concerns regarding the durability of 3D-printed prostheses have increased among users. Therefore, there is an ongoing need to explore highly durable materials that can withstand the weight of the user without breaking easily. In addition, advancements are required in technologies that enable the depiction of various skin tones and the production of smaller-sized prostheses suitable for clothing.

Prosthetic rehabilitation of patients with maxillary oncology defects using zygomatic implants

PurposeProsthetics for patients after oncological resection of the upper jaw is a complex problem associated with the physiological and anatomical separation of the oral cavity and the nasal/paranasal region. This study reports the clinical results of the use of the zygomatic implants for prosthetic rehabilitation in patients with maxillectomy due to upper jaw tumors.Materials and methodsThe study included 16 patients who underwent prosthetic rehabilitation using a zygomatic implant after maxillectomy period from 2021 to 2023. After the tumor was removed, immediate surgical obturators were placed. Main prosthetic rehabilitation was performed 6–12 months after tumor removal, but before that, a temporary obturator was made and used. Six-twelve months after tumor resection, 1–4 zygomatic implants were inserted into the zygomatic bone unilaterally or bilaterally. A total of 42 zygomatic implants were installed, 2 of which were unsuccessful and were removed in 1 patient. The implants were placed using the surgical guide, which was planned and prepared digitally.ResultsNo postsurgical complications were seen, and the patients were discharged from the hospital after 7–10 days. The patients were able to return to a normal diet (hard food) after just 7 days following surgery, with no further complaints regarding function or pain, apart from the residual edema caused by the intervention.ConclusionsThe use of prostheses fixed on zygomatic implants in patients with maxillary defects is an effective method of prosthodontic rehabilitation in complex clinical cases after maxillectomy.

Correlation between environmental nickel exposure and the development of arthritis: A large-sample cross-sectional investigation

BackgroundNickel is a common metallic element in orthopedic implanted devices and living environment exposures. It is associated with varieties of diseases. The purpose of this investigation was to explore the correlation between nickel exposure and the prevalence of arthritis. MethodsData were obtained from the National Health and Nutrition Examination Survey (NHANES) database from 2017 to 2018. Multivariate logistic regression was utilized to analyze the relationship between urinary nickel levels and arthritis. In addition, hierarchical modeling further explored the interactions and trends between urinary nickel levels and arthritis. Propensity score matching (PSM) method was used to reduce the effect of confounders. Additionally, restricted cubic spline curve (RCS) was used to assess the possible nonlinear association between urinary nickel and arthritis. ResultsThe investigation was comprised of 139 arthritis patients and 547 healthy participants. After correction by PSM, there was a positive correlation between arthritis and Nickel exposure levels. The risk of developing arthritis was significantly increased when nickel exposure levels were in the Q4 interval (OR=2.25, 95 % CI=1.03–5.02). When stratified by age and sex, nickel exposure was significantly and positively associated with arthritis in the subgroup aged over 65 years. (OR=2.78,95 %CI=1.20–6.46). Also, the difference between nickel exposure and arthritis was significant in the different gender subgroups (interaction P<0.05). Restricted cubic spline (RCS) results showed a significant linear association between nickel exposure levels and arthritis. In addition, there was a non-linear association between nickel exposure and arthritis across gender and age subgroups. ConclusionA significant positive association between nickel exposure levels and arthritis was showed by the experimental data. Controlling the use of nickel-containing medical prostheses and reducing exposure to nickel-containing daily necessity could help to slow the onset of arthritis.

Grasp Posture Variability Leads to Greater Ipsilateral Sensorimotor Beta Activation During Simulated Prosthesis Use

Motor behaviour using upper-extremity prostheses of different levels is greatly variable, leading to challenges interpreting ideal rehabilitation strategies. Elucidating the underlying neural control mechanisms driving variability benefits our understanding of adaptation after limb loss. In this follow-up study, non-amputated participants completed simple and complex reach-to-grasp motor tasks using a body-powered transradial or partial-hand prosthesis simulator. We hypothesised that under complex task constraints, individuals employing variable grasp postures will show greater sensorimotor beta activation compared to individuals relying on uniform grasping, and activation will occur later in variable compared to uniform graspers. In the simple task, partial-hand variable and transradial users showed increased neural activation from the early to late phase of the reach, predominantly in the hemisphere ipsilateral to device use. In the complex task, only partial-hand variable graspers showed a significant increase in neural activation of the sensorimotor cortex from the early to the late phase of the reach. These results suggest that grasp variability may be a crucial component in the mechanism of neural adaptation to prosthesis use, and may be mediated by device level and task complexity, with implications for rehabilitation after amputation.

Learning Curve for In-Hospital Mortality of Transcatheter Aortic Valve Replacement: Insights from the Brazilian National Registry.

Robust data on the learning curve (LC) of transcatheter aortic valve replacement (TAVR) are lacking in developing countries. To assess TAVR's LC in Brazil over time. We analyzed data from the Brazilian TAVR registry from 2008 to 2023. Patients from each center were numbered chronologically in case sequence numbers (CSNs). LC was performed using restricted cubic splines adjusted for EuroSCORE-II and the use of new-generation prostheses. Also, in-hospital outcomes were compared between groups defined according to the level of experience based on the CSN: 1st to 40th (initial-experience), 41st to 80th (early-experience), 81st to 120th (intermediate-experience), and over 121st (high-experience). Additional analysis was performed grouping hospitals according to the number of cases treated before 2014 (>40 and ≤40 procedures). The level of significance adopted was <0.05. A total of 3,194 patients from 25 centers were included. Mean age and EuroSCORE II were 80.7±8.1 years and 7±7.1, respectively. LC analysis demonstrated a drop in adjusted in-hospital mortality after treating 40 patients. A leveling off of the curve was observed after case #118. In-hospital mortality across the groups was 8.6%, 7.7%, 5.9%, and 3.7% for initial-, early-, intermediate-, and high-experience, respectively (p<0.001). High experience independently predicted lower mortality (OR 0.57, p=0.013 vs. initial experience). Low-volume centers before 2014 showed no significant decrease in the likelihood of death with gained experience, whereas high-volume centers had a continuous improvement after case #10. A TAVR LC phenomenon was observed for in-hospital mortality in Brazil. This effect was more pronounced in centers that treated their first 40 cases before 2014 than those that reached this milestone after 2014.

Cup Placement in Thumb Carpometacarpal Joint Prostheses: The Role of the Guidewire

The increasing use of thumb carpometacarpal joint prostheses for advanced CMC 1 (carpometacarpal) joint arthritis reflects the success of the latest prosthesis generations, which has been achieved through their improved functional outcomes and lower complication rates. Precise alignment of the prosthesis cup parallel to the proximal joint surface of the trapezium is essential for stability and the prevention of dislocation. This is a challenging surgical step, particularly for surgeons new to this technique. Despite adequate positioning of the guidewire, misplacements of the cup may occur, necessitating intraoperative revision. This study examined the deviations in cup and guidewire positioning in thumb carpometacarpal joint prosthesis implantations by inexperienced and experienced surgeons through radiological analysis of 65 prostheses. Both inexperienced and experienced surgeons achieved precise guidewire positioning with mean deviations of<2.2°. Inexperienced surgeons showed significantly larger cup deviations in the dorsopalmar and lateral view (7.6±6.1° and 7.3±5.9°) compared with experienced surgeons (3.6±2.7° and 3.6±2.5°; p=0.012, p=0.017). The deviation of the cup position exhibited by inexperienced surgeons tends to be in the direction opposite to the initial guidewire position (p<0.0038). The results highlight the current challenges in cup positioning depending on a surgeon's level of experience, questioning the reliability of the current guidewire placement.

Cumulative loading increases and loading asymmetries persist during walking for people with a transfemoral bone-anchored limb

BackgroundA bone-anchored limb (BAL) is an alternative to a traditional socket-type prosthesis for people with transfemoral amputation. Early laboratory-based evidence suggests improvement in joint and limb loading mechanics during walking with a BAL compared to socket prosthesis use. However, changes in cumulative joint and limb loading measures, which may be predictive of degenerative joint disease progression, remain unknown. Research questionDo cumulative total limb and hip joint loading during walking change using a BAL for people with unilateral transfemoral amputation, compared to prior socket prosthesis use? MethodsA case-series cohort of eight participants with prior unilateral transfemoral amputation who underwent BAL hardware implantation surgery were retrospectively analyzed (4 M/4 F; BMI: 27.7 ± 3.1 kg/m2; age: 50.4 ± 10.2 years). Daily step count and whole-body motion capture data were collected before (using socket prosthesis) and one-year after BAL hardware implantation. Cumulative total limb and hip joint loading and between-limb loading symmetry metrics were calculated during overground walking at both time points and compared using Cohen’s d effect sizes. ResultsOne year after BAL hardware implantation, participants demonstrated bilateral increases in cumulative total limb loading (amputated: d = -0.65; intact: d = -0.72) and frontal-plane hip moment (amputated: d = -1.29; intact: d = -1.68). Total limb loading and hip joint loading in all planes remained asymmetric over time, with relative overloading of the intact limb in all variables of interest at the one-year point. SignificanceDespite increases in cumulative total limb and hip joint loading, between-limb loading asymmetries persist. Habitual loading asymmetry has been implicated in contributing to negative long-term joint health and onset or progression of degenerative joint diseases. Improved understanding of methods to address habitual loading asymmetries is needed to optimize rehabilitation and long-term joint health as people with transfemoral amputation increase physical activity when using a BAL.

Assessment of self-esteem and quality of life in patients with transtibial amputations using an exoskeletal prosthesis.

Lower limb amputation can have profound physical, psychological, and social effects on individuals. Assistive aids like prosthetic lower limbs can help an individual regain mobility and thereby affect their self-esteem and quality of life. To assess self-esteem and quality of life in patients with transtibial amputations who are using a transtibial prosthesis and explore the association between sociodemographic and amputation-related factors with self-esteem and prosthesis-related quality of life measures. A cross-sectional study. An orthotics and prosthetics center (Bhagwan Mahaveer Viklang Sahayata Samiti) in Jaipur, Rajasthan. Patients with transtibial amputations using exoskeletal prostheses between July and September 2022, in Jaipur, Rajasthan. The study used Rosenberg self-esteem questionnaire and Prosthesis Evaluation Questionnaire (PEQ) for self-esteem and quality of life assessment, respectively. Descriptive analysis was used to present the demographic details, and nonparametric tests examined the relationship between PEQ dimensions and sociodemographic variables. The study included 138 participants, primarily <40 years old (45.7%) and mostly engaged in high-activity occupations. Self-esteem mean score (SD) was 19.9 (3.9), with 89.1% exhibiting normal self-esteem. Prosthesis-related quality of life, showed high satisfaction across various domains, including ambulation, appearance, frustration, perceived response, residual limb health, social burden, sounds, utility, and well-being. No significant associations were found between sociodemographic factors, amputation-related variables, and self-esteem. However, PEQ scales showed associations with gender, age, occupation, type of amputation, and years of prosthesis use. These results highlight the potential advantages of exoskeletal prostheses in improving the standard of living for people with transtibial amputations. Further research is essential to develop targeted interventions for improving their overall quality of life.

Rehabilitative outcomes with preparatory suction prostheses following traumatic Gritti-Stokes amputation: A case series.

Gritti-Stokes amputation (GSA) is a knee disarticulation variant, where the femur is transected at the level of the epicondyle and the patella is fixated to the distal end. GSA results in a long residual limb with little postoperative swelling and less potential for muscular atrophy, so stable limb volume may allow the use of seal-in suction for suspension for preparatory prostheses. The purpose of this case series was to report on the efficacy of seal-in suction preparatory prostheses for 2 adults with traumatic GSA. Between October and December of 2021, 2 participants with unilateral traumatic Gritti-Stokes amputation, who had received seal-in suction suspension for their preparatory prostheses, were recruited. Information was extracted from medical charts regarding prosthetic care and mobility at preparatory and definitive prosthesis evaluation, and participants underwent standardized measurement of their residual limb and prosthesis. Duration of preparatory prosthesis use was >6 months; neither participant reported loss of suspension nor significant complications with socket fit. Participant 1 required socket replacement because of residual limb pain secondary to osteophyte formation, and Participant 2 required component replacement because of weight gain. At definitive prosthesis evaluations, both participants were unlimited community ambulators; both successfully returned to work before provision of their definitive prostheses. Results indicate that seal-in suction suspension may be viable for preparatory prostheses among adults with traumatic GSA, but knee center height discrepancies persist. GSA may yield highly functional outcomes for adults with traumatic amputation. Further research is required to substantiate these findings.

A scoping review of postoperative early rehabilitation programs after dysvascular-related amputations.

After amputation, people face challenges including wound healing and decreased functional mobility. Early mobilization in acute hospital care has proved safe, improved function, and sped discharge. Still, loss of a leg complicates standing and early mobilization after amputation. Approaches to early mobilization and rehabilitation after amputation surgery have not been widely studied. To map the evidence regarding early postoperative mobilization after dysvascular amputation. Specific aims included identifying research designs and populations, describing rehabilitation approaches, and identifying gaps within the literature. Scoping review following PRISMA-Sc guidelines. The a priori scoping review methodology conducted in June 2022 with English language and 20-year limits used the OVID Medline, OVID Allied and Complementary Medicine Database, Cumulative Index to Nursing and Allied Health Literature, Cochrane databases, and Journal of Prosthetics and Orthotics archive. Reviewer pairs used Covidence software to screen for inclusion (subjects with major lower limb dysvascular amputations, seen immediately postoperatively for hospital-based rehabilitation) with decisions by concurrence. Data for best practice scoping reviews were synthesized for analysis. Two hundred ninety-six citations were screened, 13 full texts reviewed, and 8 articles included: 2 cohort studies, 3 case-control studies, 2 single-group interventional studies, and 1 case study. There were no randomized control trials or prospective comparison group trials. Few studies were identified regarding acute rehabilitation after major lower extremity amputation. The limited evidence in this review suggested that early mobilization in the days after amputation was safe with or without use of temporary prostheses, although further research is certainly warranted.

Aortic valve replacement with rapid-deployment bioprosthesis in case of infective endocarditis: a literature review.

Recently, the use of rapid deployment (RD) aortic valve prostheses has been introduced for the treatment of aortic valve replacement (AVR), showing excellent hemodynamic performances.According to these data, some groups have proposed new RD valves as an alternative solution in the case of infective aortic endocarditis (IAE) to reduce the use of foreign materials, and the manipulation of the annulus.The aim of this review is to report the results of early clinical experiences with the use of RD bioprostheses in the case of IAE, in order to discuss technical and clinical aspects of this emerging strategy to better elucidate its advantages and limitations as a potential therapeutic solution. An in-depth search of PubMed from January to March 2023 was performed. English-language articles were selected independently by authors following the criteria in order to consider all available experiences (full papers, case reports, and case series) that have investigated the use of RD in case of IAE. The use of rapid deployment bioprosthesis represents a bailout strategy in case of severe aortic valve endocarditis and should be evaluated with caution in selected cases. This review collects the first, initial, and pioneering experiences of the use of the RD prosthesis in case of infective endocarditis, particularly when the fragility of the annular tissues precludes a secure anchoring of sutured prostheses.The reduced use of foreign materials by minimizing the number of stitches, the reduced cardiopulmonary bypass (CPB) and aortic cross-clamp times, and the excellent hemodynamic performances associated with the use of RD bioprosthesis represent the most important advantages that could justify their use in the setting of aortic valve endocarditis. Although there are few anecdotal experiences, surgical aortic valve replacement with the use of RD represents an emerging strategy in case of aortic valve endocarditis. Its advantages, pros, and cons are under debate, and robust clinical trials are needed to demonstrate its safety and efficacy.

Role of Polyetheretherketone in Prosthodontics: A Literature Review.

Implant prostheses and other fixed and removable metal prostheses have led to an increase in demand for the development of new and efficient materials such as high-performance polymers polyetheretherketone (PEEK) over titanium and other metals because of their further complications in the human body. PEEK is a polymer that is nontoxic and has a modulus of elasticity that is comparable to that of human bone. PEEK implants provide benefits over metal implants, such as reducing the stress shielding effect, simple processing, and color resemblance to natural teeth. And it is a fantastic alternative to titanium for dental and orthopedic implants. The current review is undertaken to understand the properties of this PEEK material to weigh its benefits and drawbacks for potential use in dental implants and other prostheses.

Durable and Robust Antibacterial Polypropylene Hernia Mesh for Abdominal Wall Defect Repair.

Polypropylene (PP) mesh is commonly used in repairing abdominal wall hernia (AWH). However, the use of synthetic prosthesis comes with the risk of developing a prosthetic infection, resulting in delayed healing, secondary surgery, and potentially increased mortality. To address these issues, a facile surface functionalization strategy for PP mesh based on phytic acid (PA) and polyhexamethylene guanidine (PHMG) was constructed through a one-step co-deposition process, referred to as the PA/PHMG coating. The development of PA/PHMG coating is mainly attributed to the surface affinity of PA and the electrostatic interactions between PA and PHMG. The PA/PHMG coating could be completed within 4 h under mild conditions. The prepared PA/PHMG coatings on PP mesh surfaces exhibited desirable biocompatibility toward mammalian cells and excellent antibacterial properties against the notorious "superbug" methicillin-resistant Staphylococcus aureus (MRSA) and tetracycline-resistant Escherichia coli (TRE). The PA/PHMG-coated PP meshes showed killing ratios of over 99% against MRSA in an infected abdominal wall hernia repair model. Furthermore, histological and immunohistochemical analysis revealed a significantly attenuated degree of neutrophil infiltration in the PA/PHMG coating group, attributed to the decreased bacterial numbers alleviating the inflammatory response at the implant sites. Meanwhile, the pristine PP and PA/PHMG-coated meshes showed effective tissue repair, with the PA/PHMG coating group exhibiting enhanced angiogenesis compared with pristine PP meshes, suggesting superior tissue restoration. Additionally, PP meshes with the highest PHMG weight ratio (PA/PHMG(3)) exhibited excellent long-term robustness under phosphate-buffered saline (PBS) immersion with a killing ratio against MRSA still exceeding 95% after 60 days of PBS immersion. The present work provides a facile and promising approach for developing antibacterial implants.

Transhumeral prosthesis use affects upper body kinematics and kinetics

BackgroundTranshumeral (TH) limb loss leads to loss of body mass and reduced shoulder range of motion. Despite most owning a prosthesis, prosthesis abandonment is common. The consequence of TH limb loss and prosthesis use and disuse during gait may be compensation in the upper body, contributing to back pain or injury. Understanding the impact of not wearing a TH prosthesis on upper body asymmetries and spatial-temporal aspects of gait will inform how TH prosthesis use and disuse affects the body. Research questionDoes TH limb loss alter upper body asymmetries and spatial-temporal parameters during gait when wearing and not wearing a prosthesis compared to able-bodied controls? MethodsEight male TH limb loss participants and eight male control participants completed three gait trials at self-selected speeds. The TH limb loss group performed trials with and without their prosthesis. Arm swing, trunk angular displacement, trunk-pelvis moment, and spatial-temporal aspects were compared using non-parametric statistical analyses. ResultsBoth TH walking conditions showed greater arm swing in the intact limb compared to the residual (p≤0.001), resulting in increased asymmetry compared to the control group (p≤0.001). Without the prosthesis, there was less trunk flexion and lateral flexion compared to the control group (p≤0.001). Maximum moments between the trunk and pelvis were higher in the TH group than the control group (p≤0.05). Spatial-temporal parameters of gait did not differ between the control group and either TH limb loss condition. SignificanceProsthesis use affects upper body kinematics and kinetics, but does not significantly impact spatial-temporal aspects of gait, suggesting these are compensatory actions. Wearing a prosthesis helps achieve more normative upper body kinematics and kinetics than not wearing a prosthesis, which may help limit back pain. These findings emphasize the importance of encouraging at least passive use of prostheses for individuals with TH limb loss.

The use of mandibular guidance prosthesis to correct mandibular deviation following hemimandibulectomy: A case report

The most frequent cause of mandibular deviation is surgical mandibular excision for benign or malignant tumors. Mandibular deviation towards the defect side and subsequent loss of occlusion on the unresected side are the consequences of unilateral loss of mandibular continuity occurring from trauma or surgery. A marginal, segmental, hemi, subtotal

ACHIEVING DISTAL FIXATION AND EARLY MOBILIZATION IN PATIENTS WITH SEVERE FEMORAL BONE LOSS USING AN INTERNAL PROXIMAL FEMORAL REPLACEMENT PROSTHESIS

The management of femoral bone loss is challenging during revision hip arthroplasty. In patients with Paprosky grade IIIB and IV defects, obtaining fixation and rotational stability using traditional surgical constructs is difficult. The use of a custom-made internal proximal femoral replacement prostheses has been proposed as a solution in patients, with severe femoral bone stock loss. However, there is a paucity in the literature on their use and long-term outcomes. We report on the clinical and radiological results of our cohort.We retrospectively reviewed all patients who underwent internal proximal femoral replacement for revision hip arthroplasty between April 1996 and April 2019. All patients had at least 2 years of follow-up time.160 patients underwent limb salvage at our institution using internal proximal femoral replacement. The mean follow-up was 79.7 months (S.D 41.3). Indications for revision included periprosthetic fractures, aseptic loosening, and deep infection. The mean Oxford hip score increased from 13.8 (0–22) to 31.5 (18–43) (paired t-test, p &lt; 0.001). Kaplan-Meier prosthesis survival analysis with revision as the endpoint was 87% at 5 years. None required revision of the femoral stem. There were four dislocations (5%) and there was failure to eradicate the deep infection in four.This technique allows instant distal fixation, allowing for early mobilisation. Long-term clinical and radiological outcomes are encouraging and the complication rates are acceptable for this patient group.

Biomechanical evaluation of a custom-made mandibular plate

In the field of maxillofacial surgery, mandibular reconstruction with plates is one of the operations that is performed when resection of part of the jaw is unavoidable in patients suffering from pathologies such as, for example, neoplasms and osteonecrosis. Through the use of standard prostheses, which are commercially available in various models, mandibular reconstruction is possible. However, in the presence of particularly serious and complex clinical pictures, in which it is necessary to resect large parts of the mandibular bone, such as in some oncological cases, the use of serial prostheses is not always resolving. In these cases, a customized implant, designed specifically for the patient, is preferable.Aim of this work is the mechanical evaluation of a custom-made mandibular plate with an innovative bone-implant interface geometry through a finite element analysis. Three physiological loading conditions were analysed: RUC (right unilateral canine) bite, RGF (right group functional) bite and maximum opening. Finally, the maximum pull-out force acting on the fixation screws was evaluated through an experimental fatigue test.

Processing and characterization of beryllium free Ni–Cr–Mo biomaterial doped with cerium, boron and titanium for dental applications

Dental restoration has been a major concern of healthcare since centuries. Several alloys are in use for dental prostheses including Ni–Cr–Mo alloy. The Ni–Cr–Mo alloy has advantage of economy and density over other alloys, while possessing equivalent corrosion and biocompatibility characteristics. However, beryllium in Ni–Cr–Mo dental casting alloys has associated health hazards, being carcinogenic. In this research Ni–Cr–Mo alloys with minor additions of boron (0.2 wt %), cerium (0.4 wt %) and titanium (2 wt %), to replace beryllium were developed through vacuum induction melting and investment casting technique. Manufacturing steps are detailed for the alloy development to have medically clean alloy, suitable for biomedical applications. The cast alloy samples were tested for microstructure, phases, melting temperatures, wear and corrosion characteristics. Corrosion and wear test results demonstrate that the composition with minor addition of cerium had a significant effect to have low corrosion rate (25.92 × 10−3 mills per year), low wear rate (0.04 × 10−4 mm3/N.m) and lowest coefficient of friction.

Protocole à fin de constitution d’un registre français des prothèses de hanche

INTRODUCTION: Use of joint prostheses is growing widely, in particular in developed countries. The « Société Française de Chirurgie Orthopédique et Traumatologique » (SOFCOT) has submitted in 2007 to the «Commission Nationale Informatique et liberté» (CNIL) a project for creating a hip prostheses registry. More recently, the « Conseil National Professionnel de chirurgie Orthopédique et Traumatologique » (CNP-COT) developed a national implants and observatory registry on surgical orthopaedic and traumatologic practices and pathologies (RENACOT) aiming to assure traceability and materio-vigilance of hip implants used in France. The main objective of the study is to report the current state of surgical techniques, used implants and their evolutions in hip arthroplasty in France using retrospective data provided by a multicenter registry since 2006.MATERIAL ET METHODS: On the one hand, the research systematically lists the main characteristics of all implants used in hip arthroplasty; and on the other hand, these informations are correlated with epidemiologic, demographic data, CROMs and PROMs. The study group consists by all patients receiving a hip reconstruction either in traumatology (femoral neck fractures) or above all for degenerative diseases. The data are collected in 2 questionnaires. The link between primary and revision surgery of the same prosthesis is automatic through the patient social security N°, sex and operated side.RESULTS: Patient demographics provides the corresponding population epidemiologic information’s. Registered data are available through 3 modes: 1- In running time, the registry board members only can accede to all collected data by internet 2- A biennal report of the national hip replacement activity 3- Any particular request about a specific matter or implant DISCUSSION One of the major registry interests in case of revision is the possibility to assure an automatic link with the corresponding primary arthroplasty. This is only possible if the primary questionnaire is already implemented and if the correspondence between the primary arthroplasty and the same hip reoperation/revision can automatically be established from the moment where both questionnaires are correctly completed in the registry. The CNP, through the RENACOT spreading use, aims to extend such registry practice to all orthopaedic and traumatologic surgical fields.