Use Of Femtosecond Laser Pulses Research Articles

Revolutionizing Antibacterial Surfaces: 3D Printed Nanoscale and Microscale Topographies through Two-Photon Polymerization

The evolving bacteria defense mechanism against antimicrobial agents due to the overuse and misuse of antimicrobial chemicals has led to a catastrophic problem - antimicrobial resistance, this has spurred the quest for innovative antibacterial approach to inhibit bacterial growth effectively without using any chemicals. Tailored nano- and microstructured architecture, inspired by natural nanotopography such as those found on cicada wings, hold great promise in antibacterial activity due to their unique mechano-antibacterial properties. Among the various nano-/microfabrication techniques, the two-photon polymerisation (TPP) stands out as a versatile and precise approach to fabricate arbitrarily functional three-dimensional structures with sub-micrometre resolution. The process involves the use of femtosecond laser pulses to induce polymerization of a biocompatible acrylate-based photoresin in a precise spatial pattern to generate the nano-/microarchitecture. In this study, we investigated the influence of key fabrication parameters, such as laser power, exposure time, and interface value to achieve the final pre-defined nano-/microarchitecture. Microscopy analysis showed that nanostructure of heights between 350-650 nm; 300-400 nm diameter; and increasing center-to-center distances of 700-2000 nm were successfully fabricated. The mechano-antibacterial feasibility of the two photon-designed nanoarchitecture were tested against P. aeruginosa pathogenic bacteria commonly encountered in healthcare settings. Our results showed that the TPP nano-/microarchitecture demonstrated intriguing antibacterial activity through physico-mechanical interactions between the nano-/microarchitectures and bacteria, creating surfaces that exhibit bactericidal activity. This study paves the way for advanced antibacterial applications in the field of nanotechnology and biomedicine, making a significant contribution to the ongoing efforts in combating antimicrobial resistance and promoting global health.

Femtosecond pulse laser cleaning of spray paint from heritage stone surfaces.

We explore the use of femtosecond laser pulses to clean a variety of colors of spray paint from the Moruya granite, a stone with high heritage value that is widely used for monuments and sculptures in Sydney and New South Wales (Australia). The efficiency of the cleaning treatment and the effects on the stone substrate are evaluated using optical microscopy, optical profilometry, Raman spectroscopy, energy-dispersive X-ray spectroscopy, and colorimetry. We demonstrate that femtosecond laser cleans granite without damaging it and without discoloration when the laser fluence is set below the damage threshold of the stone.

Optical nonlinearities of silicate oxide glass with gold nanoparticles outside the spectral range of surface plasmon resonance

The Z-scan technique, with the use of femtosecond laser pulses at 813 nm and of 1 kHz repetition rate, was applied for measurement of the nonlinear optical properties of silicate glass with embedded gold nanoparticles, produced by the standard melt-quenching method and then annealed at 550 °C. At irradiance levels of 1012 W m−2 it exhibited two-photon absorption with β = 3.8 × 10−15 m W−1 and positive Kerr lensing effect with n2 = 1.85 × 10−20 m2 W−1 which resulted in the nonlinear susceptibility χ(3) = (0.031 + 2.366 i) × 10−14 esu. These values, although remarkably low, indicate that the nonlinear refraction effects significantly dominate the nonlinear absorption and when appropriately increasing the doping with Au nanoparticles, this nanocomposite glass can be considered for the optical switching applications outside the spectral range of the surface plasmon resonance.

THz spintronic emitters: a review on achievements and future challenges

Abstract The field of THz spintronics is a novel direction in the research field of nanomagnetism and spintronics that combines magnetism with optical physics and ultrafast photonics. The experimental scheme of the field involves the use of femtosecond laser pulses to trigger ultrafast spin and charge dynamics in thin films composed of ferromagnetic and nonmagnetic thin layers, where the nonmagnetic layer features a strong spin–orbit coupling. The technological and scientific key challenges of THz spintronic emitters are to increase their intensity and to shape the frequency bandwidth. To achieve the control of the source of the radiation, namely the transport of the ultrafast spin current is required. In this review, we address the generation, detection, efficiency and the future perspectives of THz emitters. We present the state-of-the-art of efficient emission in terms of materials, geometrical stack, interface quality and patterning. The impressive so far results hold the promise for new generation of THz physics based on spintronic emitters.

Femtosecond Laser Synthesis of Luminescent Carbon Dots from Toluene

Products of reactions in toluene induced by nonlinear absorption of femtosecond laser pulses are studied. Laser synthesis of carbon dots with characteristic sizes of several nanometers and luminescence in the visible spectrum is demonstrated. A relation between synthesis conditions, morphology, and composition of carbon dots and their optical properties is established. The possibility of single-stage laser synthesis of polyethylene glycol passivated carbon dots having an enhanced quantum yield and improved spectral characteristics of luminescence is demonstrated. The results of the work open up new opportunities for obtaining promising carbon nanomaterials and optimizing their optical properties through the use of femtosecond laser pulses.

Ultrafast magnetization reversal by picosecond electrical pulses.

The field of spintronics involves the study of both spin and charge transport in solid-state devices. Ultrafast magnetism involves the use of femtosecond laser pulses to manipulate magnetic order on subpicosecond time scales. We unite these phenomena by using picosecond charge current pulses to rapidly excite conduction electrons in magnetic metals. We observe deterministic, repeatable ultrafast reversal of the magnetization of a GdFeCo thin film with a single sub-10-ps electrical pulse. The magnetization reverses in ~10 ps, which is more than one order of magnitude faster than any other electrically controlled magnetic switching, and demonstrates a fundamentally new electrical switching mechanism that does not require spin-polarized currents or spin-transfer/orbit torques. The energy density required for switching is low, projecting to only 4 fJ needed to switch a (20 nm)3 cell. This discovery introduces a new field of research into ultrafast charge current-driven spintronic phenomena and devices.

Time-resolved single-shot terahertz time-domain spectroscopy for ultrafast irreversible processes

Pulsed terahertz spectroscopy is suitable for spectroscopic diagnostics of ultrafast events. However, the study of irreversible or single shot ultrafast events requires ability to record transient properties at multiple time delays, i.e., time resolved at single shot level, which is not available currently. Here by angular multiplexing use of femtosecond laser pulses, we developed and demonstrated a time resolved, transient terahertz time domain spectroscopy technique, where burst mode THz pulses were generated and then detected in a single shot measurement manner. The burst mode THz pulses contain 2 sub-THz pulses, and the time gap between them is adjustable up to 1 ns with picosecond accuracy, thus it can be used to probe the single shot event at two different time delays. The system can detect the sub-THz pulses at 0.1 THz-2.5 THz range with signal to noise ratio (SNR) of ∼400 and spectrum resolution of 0.05 THz. System design was described here, and optimizations of single shot measurement of THz pulses were discussed in detail. Methods to improve SNR were also discussed in detail. A system application was demonstrated where pulsed THz signals at different time delays of the ultrafast process were successfully acquired within single shot measurement. This time resolved transient terahertz time domain spectroscopy technique provides a new diagnostic tool for irreversible or single shot ultrafast events where dynamic information can be extracted at terahertz range within one-shot experiment.

Ablation-cooled material removal with ultrafast bursts of pulses.

The use of femtosecond laser pulses allows precise and thermal-damage-free removal of material (ablation) with wide-ranging scientific, medical and industrial applications. However, its potential is limited by the low speeds at which material can be removed and the complexity of the associated laser technology. The complexity of the laser design arises from the need to overcome the high pulse energy threshold for efficient ablation. However, the use of more powerful lasers to increase the ablation rate results in unwanted effects such as shielding, saturation and collateral damage from heat accumulation at higher laser powers. Here we circumvent this limitation by exploiting ablation cooling, in analogy to a technique routinely used in aerospace engineering. We apply ultrafast successions (bursts) of laser pulses to ablate the target material before the residual heat deposited by previous pulses diffuses away from the processing region. Proof-of-principle experiments on various substrates demonstrate that extremely high repetition rates, which make ablation cooling possible, reduce the laser pulse energies needed for ablation and increase the efficiency of the removal process by an order of magnitude over previously used laser parameters. We also demonstrate the removal of brain tissue at two cubic millimetres per minute and dentine at three cubic millimetres per minute without any thermal damage to the bulk.

Femtosecond laser surface ablation of polymethyl-methacrylate with position control through z-scan

Spatial resolution of laser micromachining of polymers can be improved with the use of femtosecond laser pulses. Due to the short interaction time, thermal effects are significantly reduced. Additionally, the non-linear character of the interaction of ultrashort laser pulses with transparent materials allows the modification inside their bulk also. However, this creates the challenge to accurately focus the laser beam in the surface when only surface ablation is required. Thus, this work presents a study of the laser ablation of a transparent polymer at different pulse energies and focusing positions controlled through z-scan transmittance measurements. Experiments were performed using an Yb:KYW laser with 450 fs pulses and 1027 nm wavelength. Morphological analysis of the polymer surface after irradiation was performed using scanning electron microscopy. Similar ablation craters were found for a range of sample positions around the beam waist. However, focused ion beam cross-sections of the craters unveil significant inner modifications under most of the focusing conditions leading to surface ablation. Hence, surface ablation without damaging the bulk material only occurs at critical positions where the beam waist is located slightly outside the sample. In situ monitoring of the sample position can be made through transmittance measurements.

Elucidating microscopic structure and dynamics in optically tweezed environments

To probe the structure and dynamics of molecules under optical trapping conditions, we exploit the effect of femtosecond Fluorescence Resonance Energy Transfer (FRET) between dye molecules coated on the surface of polystyrene microspheres of various sizes suspended in water. The use of femtosecond laser pulses enables sensitive detection through two-photon fluorescence (TPF). Unlike conventional backscatter signal, the TPF signal shows a slow counterintuitive decay for the trapped microspheres when they are not fully within the laser illuminated volume. This decay is a characteristic sign of the occurrence of the FRET process. For microspheres with sizes less than the trapping focal volume, trapping of multiple particles can occur leading to the formation of optically bound clusters. Using different laser polarizations, we also extract information about the structure and dynamics of such optically bound clusters as a consequence of FRET.

Ablation of metal thin films using femtosecond laser Bessel vortex beams

Femtosecond lasers can provide submicron ablation resolution, making them suitable and attractive for various micro/nanofabrication applications. Laser beam shaping lends further advantages and increases the versatility of these sources. In this work, we report on the use of femtosecond laser pulses with first-order Bessel function (Bessel vortex) beam profiles in ablation of metal thin films. The diffraction-free nature of Bessel beams provides significant convenience regarding alignment and repeatability. Ablation profiles with Bessel vortex beams generally consist of single or multiple concentric rings, determined by pulse fluence on target. We investigate single-pulse ablation behavior with two laser wavelengths (1,030 and 515 nm) and three different Bessel beam cone angles. For each case, we measure inner and outer ring diameters and compare our results with theoretical calculations.

Nonlinear spectroscopy in the near-field: time resolved spectroscopy and subwavelength resolution non-invasive imaging

AbstractThe combination of near-field microscopy along with nonlinear optical spectroscopic techniques is presented here. The scanning near-field imaging technique can be integrated with nonlinear spectroscopic techniques to improve spatial and axial resolution of the images. Additionally, ultrafast dynamics can be probed down to nano-scale dimension. The review shows some examples for this combination, which resulted in an exciton map and vibrational contrast images with sub-wavelength resolution. Results of two-color femtosecond time-resolved pump-probe experiments using scanning near-field optical microscopy (SNOM) on thin films of the organic semiconductor 3,4,9,10 Perylenetetracarboxylic dianhydride (PTCDA) are presented. While nonlinear Raman techniques have been used to obtain highly resolved images in combination with near-field microscopy, the use of femtosecond laser pulses in electronic resonance still constitutes a big challenge. Here, we present our first results on coherent anti-Stokes Raman scattering (fs-CARS) with femtosecond laser pulses detected in the near-field using SNOM. We demonstrate that highly spatially resolved images can be obtained from poly(3-hexylthiophene) (P3HT) nano-structures where the fs-CARS process was in resonance with the P3HT absorption and with characteristic P3HT vibrational modes without destruction of the samples. Sub-diffraction limited lateral resolution is achieved. Especially the height resolution clearly surpasses that obtained with standard microCARS. These results will be the basis for future investigations of mode-selective dynamics in the near-field.

Generation and patterning of Si nanoparticles by femtosecond laser pulses

The unique optical properties of nanoparticles are highly sensitive in respect to particle shapes, sizes, and localization on a sample. This demands for a fully controlled fabrication process. The use of femtosecond laser pulses to generate and transfer nanoparticles from a bulk target towards a collector substrate is a promising approach. This process allows a controlled fabrication of spherical nanoparticles with a very smooth surface. Several process parameters can be varied to achieve the desired nanoparticle characteristics. In this paper, the influence of two of these parameters, i.e. the applied pulse energy and the laser beam shape, on the generation of Si nanoparticles from a bulk Si target are studied in detail. By changing the laser intensity distribution on the target surface one can influence the dynamics of molten material inducing its flow to the edges or to the center of the focal spot. Due to this dynamics of molten material, a single femtosecond laser pulse with a Gaussian beam shape generates multiple spherical nanoparticles from a bulk Si target. The statistical properties of this process, with respect to number of generated nanoparticles and laser pulse energy are investigated. We demonstrate for the first time that a ring-shaped intensity distribution on the target surface results in the generation of a single silicon nanoparticle with a controllable size. Furthermore, the generated silicon nanoparticles presented in this paper show strong electric and magnetic dipole resonances in the visible and near-infrared spectral range. Theoretical simulations as well as optical scattering measurements of single silicon nanoparticles are discussed and compared.

Formation of multiscale surface structures on nickel via above surface growth and below surface growth mechanisms using femtosecond laser pulses

The formation of self-organized micro- and nano-structured surfaces on nickel via both above surface growth (ASG) and below surface growth (BSG) mechanisms using femtosecond laser pulse illumination is reported. Detailed stepped growth experiments demonstrate that conical mound-shaped surface structure development is characterized by a balance of growth mechanisms including scattering from surface structures and geometric effects causing preferential ablation of the valleys, flow of the surface melt, and redeposition of ablated material; all of which are influenced by the laser fluence and the number of laser shots on the sample. BSG-mound formation is dominated by scattering, while ASG-mound formation is dominated by material flow and redeposition. This is the first demonstration to our knowledge of the use of femtosecond laser pulses to fabricate metallic surface structures that rise above the original surface. These results are useful in understanding the details of multi-pulse femtosecond laser interaction with metals.

Scanning near-field optical coherent anti-Stokes Raman microscopy (SNOM-CARS) with femtosecond laser pulses in vibrational and electronic resonance

Accessing ultrafast photoinduced molecular dynamics on a femtosecond time-scale with vibrational selectivity and at the same time sub-diffraction limited spatial resolution would help to gain important information about ultrafast processes in nanostructures. While nonlinear Raman techniques have been used to obtain highly resolved images in combination with near-field microscopy, the use of femtosecond laser pulses in electronic resonance still constitutes a big challenge. Here, we present our first results on coherent anti-Stokes Raman scattering (fs-CARS) with femtosecond laser pulses detected in the near-field using scanning near-field optical microscopy (SNOM). We demonstrate that highly spatially resolved images can be obtained from poly(3-hexylthiophene) (P3HT) nano-structures where the fs-CARS process was in resonance with the P3HT absorption and with characteristic P3HT vibrational modes without destruction of the samples. Sub-diffraction limited lateral resolution is achieved. Especially the height resolution clearly surpasses that obtained with standard microCARS. These results will be the basis for future investigations of mode-selective dynamics in the near field.

Elementary relaxation processes investigated by femtosecond photoelectron spectroscopy of two‐dimensional materials

AbstractElementary scattering processes in solid matter occur on ultrafast timescales and photoelectron spectroscopy in the time domain represents an excellent tool for their analysis. Conventional photoemission accesses binding energies of electronic states and their momentum dispersion. The use of femtosecond laser pulses in pump‐probe experiments allows obtaining direct insights to the energy and momentum dependence of ultrafast dynamics. This article introduces the elementary interaction processes and emphasizes recent work performed in this rapidly developing field. Decay processes in the low excitation limit are addressed, where electrons decay according to their interaction with carriers in equilibrium. Here, hot electron relaxation in epitaxial metallic film is reviewed. In the limit of an intense optical excitation, scattering of the excited electrons among each other establishes a non‐equilibrium state. Results on charge‐density wave materials and the effect of coherent nuclear motion on the electronic structure, which can break low symmetry ground states, are discussed. Figure reprinted with permission from [71].

Cell Technology Employing Femtosecond Laser Pulses

Practical advantages of using femtosecond laser pulses for manipulations in cell surgery were demonstrated. The use of femtosecond laser pulses enables precision punching of the zona pellucida of the embryo without damaging its cells. With the help of femtosecond laser tweezers/scalpel, auxillary laser hatching was performed and a technique of optical biopsy of mammalian embryo was developed, which enabled non-contact sampling of embryonic material for preimplantation diagnostics. Our findings suggest that about 90% embryos retained the ability to develop at least to the blastula stage after this manipulation.

Ultrafast Laser Pulses to Detect and Generate Fast Thermomechanical Transients in Matter

The use of femtosecond laser pulses to impulsively excite thermal and mechanical transients in matter has led, in the last years, to the development of picosecond acoustics. Recently, the pump-probe approach has been applied to nano-engineered materials to optically generate and detect acoustic waves in the gigahertz-terahertz frequency range. In this paper, we review the latest advances on ultrafast generation and detection of thermal gradients and pseudo-surface acoustic waves in 2-D lattices of metallic nanostructures. Comparing the experimental findings to the numeric analysis of the full thermomechanical problem, these materials emerge as model systems to investigate both the mechanical and thermal energy transfer at the nanoscale. The sensitivity of the technique to the nanostructure mass and shape variations, coupled with the phononic crystal properties of the lattices, opens the way to a variety of applications ranging from hypersonic waveguiding to mass sensors with femtosecond time resolution.

Evaluation of femtosecond laser-induced breakdown spectroscopy for explosive residue detection

Recently laser-induced breakdown spectroscopy (LIBS) has been investigated as a potential technique for trace explosive detection. Typically LIBS is performed using nanosecond laser pulses. For this work, we have investigated the use of femtosecond laser pulses for explosive residue detection at two different fluences. Femtosecond laser pulses have previously been shown to provide several advantages for laser ablation and other LIBS applications. We have collected LIBS spectra of several bulk explosives and explosive residues at different pulse durations and energies. In contrast to previous femtosecond LIBS spectra of explosives, we have observed atomic emission peaks for the constituent elements of explosives - carbon, hydrogen, nitrogen, and oxygen. Preliminary results indicate that several advantages attributed to femtosecond pulses are not realized at higher laser fluences.

Study of spectral and annealing properties of fiber Bragg gratings written in H_2-free and H_2- loaded fibers by use of femtosecond laser pulses

The spectral and annealing properties of a series of fiber Bragg gratings (FBGs) written in both H(2)-loaded and H(2)-free fibers by use of 800nm femtosecond laser pulse irradiation and created through a phase mask, have been investigated. It is found that type II FBGs inscribed in H(2)- loaded fibers exhibit superior spectral quality when compared with those written in H(2)-free fibers. Isochronal annealing tests shows that type II FBGs written in H(2)-free fibers have the highest thermal stability, followed (in order of stability) by H(2)-loaded type II, H(2)-free type I and then H(2)-loaded type I FBGs. The thermal stability of the H(2)-loaded type II FBGs can effectively be increased by using a high temperature pre-annealing treatment. After the treatment, type II FBGs written into both H(2)-free and H(2)-loaded fibers can sustain long-term annealing (for more than 12 hours) at temperatures of more than 1000 masculineC while their high reflectivities can still be maintained. This demonstrates the real potential of the FBGs developed and investigated in this work to be used as the ideal sensing elements for a series of high temperature measurement applications.