Use Of Engineered Nanomaterials Research Articles

Characterizing applications, exposure risks, and hazard communication for engineered nanomaterials in construction.

Engineered nanomaterials (ENMs) may pose health risks to workers. Objectives were to characterize ENM applications in construction, identify exposure scenarios, and evaluate the quality of safety data sheets (SDSs) for nano-enabled construction products. SDSs and product data were obtained from a public database of nano-enabled construction products. Descriptive statistics were calculated for affected trades, product categories, and types of ENMs. A sample of SDSs (n = 33) was evaluated using modified criteria developed by NIOSH researchers. Bulk analysis via transmission electron microscopy characterized nanoparticles in a subset of products. Companies report using >50 ENMs in construction products. ENM composition could not be determined via SDSs for 38.1% of the 907 products examined. Polymers and metal oxides tied for most frequently reported ENMs (n = 87, 9.6%). Nano silica, graphene, carbon nanotubes, and silver nanoparticles were also frequently reported. Most of the products were paints and coatings (n = 483, 53.3%), followed by pre-market additives, cementitious materials, insulation, and lubricants. Workers in twenty construction trades are likely to handle nano-enabled products, these particularly encompass cement and brick masons, painters, laborers, carpenters, glaziers, and insulators. A wide range of exposure scenarios were identified. SDSs were classified as satisfactory (18%), in need of improvement (12%), or in need of significant improvement (70%). Bulk analyses revealed discrepancies between actual ENM composition and those in SDSs. There has been significant progress investigating risks to construction workers posed by ENMs, but SDSs need major improvements. This study provides new insights on the use of ENMs in construction, exposure risks, and hazard communication.

A critical review on the role of abiotic factors on the transformation, environmental identity and toxicity of engineered nanomaterials in aquatic environment

Engineered nanomaterials (ENMs) are at the forefront of many technological breakthroughs in science and engineering. The extensive use of ENMs in several consumer products has resulted in their release to the aquatic environment. ENMs entering the aquatic ecosystem undergo a dynamic transformation as they interact with organic and inorganic constituents present in aquatic environment, specifically abiotic factors such as NOM and clay minerals, and attain an environmental identity. Thus, a greater understanding of ENM-abiotic factors interactions is required for an improved risk assessment and sustainable management of ENMs contamination in the aquatic environment. This review integrates fundamental aspects of ENMs transformation in aquatic environment as impacted by abiotic factors, and delineates the recent advances in bioavailability and ecotoxicity of ENMs in relation to risk assessment for ENMs-contaminated aquatic ecosystem. It specifically discusses the mechanism of transformation of different ENMs (metals, metal oxides and carbon based nanomaterials) following their interaction with the two most common abiotic factors NOM and clay minerals present within the aquatic ecosystem. The review critically discusses the impact of these mechanisms on the altered ecotoxicity of ENMs including the impact of such transformation at the genomic level. Finally, it identifies the gaps in our current understanding of the role of abiotic factors on the transformation of ENMs and paves the way for the future research areas.

Engineered nanomaterials in plant diseases: can we combat phytopathogens?

Engineered nanomaterials (ENM) have a high potential for use in several areas of agriculture including plant pathology. Nanoparticles (NPs) alone can be applied for disease management due to their antimicrobial properties. Moreover, nanobiosensors allow a rapid and sensitive diagnosis of pathogens because NPs can be conjugated with nucleic acids, proteins and other biomolecules. The use of ENM in diagnosis, delivery of fungicides and therapy is an eco-friendly and economically viable alternative. This review focuses on different promising studies concerning ENM used for plant disease management including viruses, fungi, oomycetes and bacteria; diagnosis and delivery of antimicrobials and factors affecting the efficacy of nanomaterials, entry, translocation and toxicity. Although much research is required on metallic NPs due to the possible risks to the final consumer, ENMs are undoubtedly very useful tools to achieve food security in the world. KEY POINTS: • Increasing global population and fungicides have necessitated alternative technologies. • Nanomaterials can be used for detection, delivery and therapy of plant diseases. • The toxicity issues and safety should be considered before the use of nanomaterials.

CONSUMERS’ AWARENESS AND KNOWLEDGE OF NANOFOOD IN MALAYSIA

The integration of engineered nanomaterials (ENMs) in the food and agriculture industry is now common and rampant among giant food manufacturers to enhance the quality, functionality, and physicality of food products. However, consumers have not been consulted and informed on the use of ENMs in food despite various potential safety and health risks associated with oral exposure of ENMs illustrated from scientific studies. In the European Union, the food law was amended to include provisions on nanotechnology after conducting a public consultation to explore public awareness and perception of nanotechnology. In the absence of a specific regulatory framework for nanofood in Malaysia, this study aims to analyse consumers’ awareness and knowledge of nanofood. The result from the study serves as an invaluable input to the regulatory authority in framing any regulatory reform to regulate nanofood. A survey was conducted using a closed-ended questionnaire distributed online. The result indicates that the awareness and understanding of nanofood are still lacking and not satisfactory.

Susceptibility Factors in Chronic Lung Inflammatory Responses to Engineered Nanomaterials.

Engineered nanomaterials (ENMs) are products of the emerging nanotechnology industry and many different types of ENMs have been shown to cause chronic inflammation in the lungs of rodents after inhalation exposure, suggesting a risk to human health. Due to the increasing demand and use of ENMs in a variety of products, a careful evaluation of the risks to human health is urgently needed. An assessment of the immunotoxicity of ENMs should consider susceptibility factors including sex, pre-existing diseases, deficiency of specific genes encoding proteins involved in the innate or adaptive immune response, and co-exposures to other chemicals. This review will address evidence from experimental animal models that highlights some important issues of susceptibility to chronic lung inflammation and systemic immune dysfunction after pulmonary exposure to ENMs.

Engineered Nanomaterials and Type I Allergic Hypersensitivity Reactions.

Type I allergic hypersensitivity disorders (atopy) including asthma, atopic dermatitis, allergic rhinitis, and food allergy are on the rise in developed and developing countries. Engineered nanomaterials (ENMs) span a large spectrum of material compositions including carbonic, metals, polymers, lipid-based, proteins, and peptides and are being utilized in a wide range of industries including healthcare and pharmaceuticals, electronics, construction, and food industry, and yet, regulations for the use of ENMs in consumer products are largely lacking. Prior evidence has demonstrated the potential of ENMs to induce and/or aggravate type I allergic hypersensitivity responses. Furthermore, previous studies have shown that ENMs could directly interact with and activate key T-helper 2 (Th2) effector cell types (such as mast cells) and the complement system, which could result in pseudoallergic (non-IgE-mediated) hypersensitivity reactions. Nevertheless, the underlying molecular mechanisms of ENM-mediated induction and/or exacerbation of type I immune responses are poorly understood. In this review, we first highlight key examples of studies that have demonstrated inherent immunomodulatory properties of ENMs in the context of type I allergic hypersensitivity reactions, and most importantly, we attempt to put together the potential molecular mechanisms that could drive ENM-mediated stimulation and/or aggravation of type I allergic hypersensitivity responses.

The neurotoxicity induced by engineered nanomaterials.

Engineered nanomaterials (ENMs) have been widely used in various fields due to their novel physicochemical properties. However, the use of ENMs has led to an increased exposure in humans, and the safety of ENMs has attracted much attention. It is universally acknowledged that ENMs could enter the human body via different routes, eg, inhalation, skin contact, and intravenous injection. Studies have proven that ENMs can cross or bypass the blood–brain barrier and then access the central nervous system and cause neurotoxicity. Until now, diverse in vivo and in vitro models have been developed to evaluate the neurotoxicity of ENMs, and oxidative stress, inflammation, DNA damage, and cell death have been identified as being involved. However, due to various physicochemical properties of ENMs and diverse study models in existing studies, it remains challenging to establish the structure-activity relationship of nanomaterials in neurotoxicity. In this paper, we aimed to review current studies on ENM-induced neurotoxicity, with an emphasis on the molecular and cellular mechanisms involved. We hope to provide a rational material design strategy for ENMs when they are applied in biomedical or other engineering applications.

Portfolio Optimization of Nanomaterial Use in Clean Energy Technologies.

While engineered nanomaterials (ENMs) are increasingly incorporated in diverse applications, risks of ENM adoption remain difficult to predict and mitigate proactively. Current decision-making tools do not adequately account for ENM uncertainties including varying functional forms, unique environmental behavior, economic costs, unknown supply and demand, and upstream emissions. The complexity of the ENM system necessitates a novel approach: in this study, the adaptation of an investment portfolio optimization model is demonstrated for optimization of ENM use in renewable energy technologies. Where a traditional investment portfolio optimization model maximizes return on investment through optimal selection of stock, ENM portfolio optimization maximizes the performance of energy technology systems by optimizing selective use of ENMs. Cumulative impacts of multiple ENM material portfolios are evaluated in two case studies: organic photovoltaic cells (OPVs) for renewable energy and lithium-ion batteries (LIBs) for electric vehicles. Results indicate ENM adoption is dependent on overall performance and variance of the material, resource use, environmental impact, and economic trade-offs. From a sustainability perspective, improved clean energy applications can help extend product lifespans, reduce fossil energy consumption, and substitute ENMs for scarce incumbent materials.

Ecofriendly nanotechnologies and nanomaterials for environmental applications: Key issue and consensus recommendations for sustainable and ecosafe nanoremediation

The use of engineered nanomaterials (ENMs) for environmental remediation, known as nanoremediation, represents a challenging and innovative solution, ensuring a quick and efficient removal of pollutants from contaminated sites. Although the growing interest in nanotechnological solutions for pollution remediation, with significant economic investment worldwide, environmental and human risk assessment associated with the use of ENMs is still a matter of debate and nanoremediation is seen yet as an emerging technology. Innovative nanotechnologies applied to water and soil remediation suffer for a proper environmental impact scenario which is limiting the development of specific regulatory measures and the exploitation at European level. The present paper summarizes the findings from the workshop: “Ecofriendly Nanotechnology: state of the art, future perspectives and ecotoxicological evaluation of nanoremediation applied to contaminated sediments and soils” convened during the Biannual ECOtoxicology Meeting 2016 (BECOME) held in Livorno (Italy). Several topics have been discussed and, starting from current state of the art of nanoremediation, which represents a breakthrough in pollution control, the following recommendations have been proposed: (i) ecosafety has to be a priority feature of ENMs intended for nanoremediation; ii) predictive safety assessment of ENMs for environmental remediation is mandatory; (iii) greener, sustainable and innovative nano-structured materials should be further supported; (iii) those ENMs that meet the highest standards of environmental safety will support industrial competitiveness, innovation and sustainability. The workshop aims to favour environmental safety and industrial competitiveness by providing tools and modus operandi for the valorization of public and private investments.

Risks, Release and Concentrations of Engineered Nanomaterial in the Environment

For frequently used engineered nanomaterials (ENMs) CeO2-, SiO2-, and Ag, past, current, and future use and environmental release are investigated. Considering an extended period (1950 to 2050), we assess ENMs released through commercial activity as well as found in natural and technical settings. Temporal dynamics, including shifts in release due to ENM product application, stock (delayed use), and subsequent end-of-life product treatment were taken into account. We distinguish predicted concentrations originating in ENM use phase and those originating from end-of-life release. Furthermore, we compare Ag- and CeO2-ENM predictions with existing measurements. The correlations and limitations of the model, and the analytic validity of our approach are discussed in the context of massive use of assumptive model data and high uncertainty on the colloidal material captured by the measurements. Predictions for freshwater CeO2-ENMs range from 1 pg/l (2017) to a few hundred ng/l (2050). Relative to CeO2, the SiO2-ENMs estimates are approximately 1,000 times higher, and those for Ag-ENMs 10 times lower. For most environmental compartments, ENM pose relatively low risk; however, organisms residing near ENM ‘point sources’ (e.g., production plant outfalls and waste treatment plants), which are not considered in the present work, may be at increased risk.

Release of TiO2 – (Nano) particles from construction and demolition landfills

A large fraction of engineered nanomaterials (ENM) will be deposited in landfills and it is assumed that ENM are securely locked in landfill sites and cannot leach into the environment (e.g. surface waters). However, experimental evidence supporting this assumption is lacking, as current production volumes of ENM are still too small and/or analytical techniques not sensitive enough to allow for the detection and quantification of ENM in landfill leachates. TiO2 particles are currently used in large quantities, for example in construction materials such as paints and renders as white pigments and their sizes extend into the nano-size range. We, therefore, selected TiO2 particles as a surrogate to assess the potential release of ENM from construction and demolition (C&D) landfill sites. We collected leachate samples from a landfill over one year and used complementary analytical techniques, including inductively coupled plasma (ICP) – optical emission spectroscopy (OES), automated scanning electron microscopy (auto SEM), transmission electron microscopy (TEM) and single particle ICP - mass spectrometry (spICPMS) to quantify TiO2 particles in landfill leachates. Total elemental Ti contents were mostly around a few tens of μgL−1 and were strongly correlated with total suspended solids. Based on the volumetric discharge of the landfill leachate water from the landfill, we estimate a total amount of ~0.5kg of TiO2 particles that are released annually from the landfill. Ti concentrations derived from ICP-OES measurements were in good agreement with quantifications based on TiO2 particles detected by auto SEM analyses. spICPMS measurements indicated a number concentration of Ti-containing particles in the order of 105mL−1 and TEM analyses dominantly revealed nanoscale TiO2 particles with a spherical shape typically observed for TiO2 particles used as white pigments. In addition, angular TiO2 particles with a well-defined crystal habitus were detected, suggesting that also natural TiO2 particles of comparable sizes are present in the landfill leachates.The results from this study indicate that (nanoscale) TiO2 particles are released from C&D landfill sites (~5g/year). Although the amount of TiO2 particles released from C&D landfill sites may still be rather low, these particles may serve as proxy for assessing the future release of ENM from C&D landfill sites, which may become relevant as an increasing use of ENM is predicted for construction materials in general.

Nanosafety practices: results from a national survey at research facilities

The exposure to engineered nanomaterials (ENMs) is a new emerging risk at work due to an increase in the number of workers potentially exposed to them and the current lack of data on their health and safety risks. This paper reports the findings of a survey designed to study the safety practices employed by workers in Spanish research facilities performing tasks involving the use of ENMs at research level. A questionnaire pretested and validated by an expert panel was sent by e-mail to the target audience. The 425 surveys completed show that most of the respondents handled up to 5 different ENMs, in suspension, in small amounts during short periods of exposure. The implementation of common hygienic practices, such as the use of protection for hands and the implementation of fume hoods, is widely indicated. The selection of the preventive and protective measures does not depend on the characteristics of ENMs handled. Also, the risks posed by ENMs are widely ignored. Besides the performance of risk assessment, hygienic monitoring and the conducting of a specific health surveillance are practically non-existent although some accidents relating to ENMs were identified. In conclusion, workers’ exposure to ENMs seems to be low. Even though the best practices and preventive and protective measures reported were employed, most of the respondents could not be correctly protected. Moreover, workers do not associate the measures implemented with the nanorisks. Finally, there is a lack of proactive action underway to protect the workers, and concerns about safety are weakly evidenced.

Literature Review of (Q)SAR Modelling of Nanomaterial Toxicity.

Despite the clear benefits that nanotechnology can bring to various sectors of industry, there are serious concerns about the potential health risks associated with engineered nanomaterials (ENMs), intensified by the limited understanding of what makes ENMs toxic and how to make them safe. As the use of ENMs for commercial purposes and the number of workers/end-users being exposed to these materials on a daily basis increases, the need for assessing the potential adverse effects of multifarious ENMs in a time- and cost-effective manner becomes more apparent. One strategy to alleviate the problem of testing a large number and variety of ENMs in terms of their toxicological properties is through the development of computational models that decode the relationships between the physicochemical features of ENMs and their toxicity. Such data-driven models can be used for hazard screening, early identification of potentially harmful ENMs and the toxicity-governing physicochemical properties, and accelerating the decision-making process by maximising the use of existing data. Moreover, these models can also support industrial, regulatory and public needs for designing inherently safer ENMs. This chapter is mainly concerned with the investigation of the applicability of (quantitative) structure-activity relationship ((Q)SAR) methods to modelling of ENMs' toxicity. It summarizes the key components required for successful application of data-driven toxicity prediction techniques to ENMs, the published studies in this field and the current limitations of this approach.

Toxicological implications of released particulate matter during thermal decomposition of nano-enabled thermoplastics

Nano-enabled thermoplastics are part of the growing market of nano-enabled products (NEPs) that have vast utility in several industries and consumer goods. The use and disposal of NEPs at their end of life has raised concerns about the potential release of constituent engineered nanomaterials (ENMs) during thermal decomposition and their impact on environmental health and safety. To investigate this issue, industrially relevant nano-enabled thermoplastics including polyurethane, polycarbonate, polypropylene containing carbon nanotubes (0.1 and 3% w/v, respectively), polyethylene containing nanoscale iron oxide (5% w/v), and ethylene vinyl acetate containing nanoscale titania (2 and 5% w/v) along with their pure thermoplastic matrices were thermally decomposed using the recently developed lab based Integrated Exposure Generation System (INEXS). The life cycle released particulate matter (called LCPM) was monitored using real time instrumentation, size fractionated, sampled, extracted and prepared for toxicological analysis using primary small airway epithelial cells to assess potential toxicological effects. Various cellular assays were used to assess reactive oxygen species and total glutathione as measurements of oxidative stress along with mitochondrial function, cellular viability, and DNA damage. By comparing toxicological profiles of LCPM released from polymer only (control) with nano-enabled LCPM, potential nanofiller effects due to the use of ENMs were determined. We observed associations between NEP properties such as the percent nanofiller loading, host matrix, and nanofiller chemical composition and the physico-chemical properties of released LCPM, which were linked to biological outcomes. More specifically, an increase in percent nanofiller loading promoted a toxicological response independent of increasing LCPM dose. Importantly, differences in host matrix and nanofiller composition were shown to enhance biological activity and toxicity of LCPM. This work highlights the importance of assessing the toxicological properties of LCPM and raises environmental health and safety concerns of nano-enabled products at their end of life during thermal decomposition/incineration.

Leaching potential of nano-scale titanium dioxide in fresh municipal solid waste

With the rapid development in nanotechnology in recent years, the number of commercially available products containing engineered nanomaterials (ENMs) has increased significantly. It is expected that large fractions of these ENMs will end up in landfills for final disposal. Despite the wide use of ENMs, little data is available on their fate within landfills. This study examined the leaching behavior of nanoscale titanium dioxide (nano-TiO2), one of the mostly used ENMs, in fresh municipal solid wastes (MSWs). Batch reactors containing municipal waste samples were spiked with a range of nano-TiO2 concentrations at different pH and ionic strength conditions. The Ti concentrations in leachate decreased rapidly and reached steady state after about 12-24 h. Results suggest that, for the environmental conditions considered, approximately 3-19% of the added nano-TiO2 remained in leachate. Batch tests conducted with individual synthetically-prepared solid waste components also showed low leaching potential (5.2% for organic waste, 3.3% for glass, 1.7% for both textile and paper and 0.6% for metal), indicating that all components of MSW contributed to the retention of the nano-TiO2 mass within the solid matrix.

A relative ranking approach for nano-enabled applications to improve risk-based decision making: a case study of Army materiel

Assessing the health and environmental risks of engineered nanomaterials (ENMs) continues to be a challenging endeavor. Due to extensive challenges related to applying traditional risk assessment frameworks to ENMs, decision making regarding the use of ENMs in products and applications may need to rely on structured decision support tools such as risk ranking approaches. This study examines the use of one risk ranking tool that incorporates both quantitative and qualitative information regarding the potential human health risks of ENMs, focused primarily on worker and soldier health. Using a case study involving Army materiel (i.e., equipment), a relative risk ranking algorithm is proposed that accounts for not only the physicochemical characteristics of the ENMs, but also the characteristics of the Army materiel. In this way, the resulting risk potential for soldiers and workers is not solely based on the inherent characteristics of the ENMs but is also influenced within the context of the technology being developed. Among other important findings, the results from applying this risk ranking algorithm in this case study suggest that inhalation from accidental exposures to carbon nanotubes and copper flakes incorporated into energy and obscurant materiel by Army workers rank highest relative to the other items evaluated in this baseline assessment. As the presence of data gaps was one of the greatest challenges to applying this risk ranking algorithm, future applications may benefit from reliance on a continually revised database that may be updated in real time and possibly synced with publically available databases in order to use the most current and comprehensive set(s) of data available.

Sources, Distribution, Environmental Fate, and Ecological Effects of Nanomaterials in Wastewater Streams

Engineered nanomaterials (ENM) are manufactured, as opposed to being an incidental by-product of combustion or a natural process, and they often have unique or novel properties that emerge from their small size. These materials are being used in an expanding array of consumer products and, like all technological developments, have both benefits and risks. As the use of ENM in consumer products becomes more common, the amount of these nanomaterials entering wastewater stream increases. Estimates of nanomaterials production are in the range of 500 and 50,000 tons per year for silver and titanium dioxide (TiO2) alone, respectively. Nanomaterials enter the wastewater stream during the production, usage, and disposal of nanomaterial-containing products. The predicted values of nanomaterials range from 0.003 (fullerenes) to 21 ng L−1 (nano-TiO2) for surface waters, and from 4 ng L−1 (fullerenes) to 4 μg L−1 (nano-TiO2) for sewage treatment effluents. Therefore, investigating the fate of nanomaterials in wastewater streams is critical for risk assessment and pollution control. The authors aim first to identify the sources of nanomaterials reaching wastewater streams, then determine their occurrence and distribution, and finally discuss their fate in relation to human and ecological health, and environmental impact.

Transformation of pristine and citrate-functionalized CeO2 nanoparticles in a laboratory-scale activated sludge reactor.

Engineered nanomaterials (ENMs) are used to enhance the properties of many manufactured products and technologies. Increased use of ENMs will inevitably lead to their release into the environment. An important route of exposure is through the waste stream, where ENMs will enter wastewater treatment plants (WWTPs), undergo transformations, and be discharged with treated effluent or biosolids. To better understand the fate of a common ENM in WWTPs, experiments with laboratory-scale activated sludge reactors and pristine and citrate-functionalized CeO2 nanoparticles (NPs) were conducted. Greater than 90% of the CeO2 introduced was observed to associate with biosolids. This association was accompanied by reduction of the Ce(IV) NPs to Ce(III). After 5 weeks in the reactor, 44 ± 4% reduction was observed for the pristine NPs and 31 ± 3% for the citrate-functionalized NPs, illustrating surface functionality dependence. Thermodynamic arguments suggest that the likely Ce(III) phase generated would be Ce2S3. This study indicates that the majority of CeO2 NPs (>90% by mass) entering WWTPs will be associated with the solid phase, and a significant portion will be present as Ce(III). At maximum, 10% of the CeO2 will remain in the effluent and be discharged as a Ce(IV) phase, governed by cerianite (CeO2).

Engineered nanomaterials in food: implications for food safety and consumer health.

From the current state-of-the-art, it is clear that nanotechnology applications are expected to bring a range of benefits to the food sector aiming at providing better quality and conservation. In the meantime, a growing number of studies indicate that the exposure to certain engineered nanomaterials (ENMs) has a potential to lead to health complications and that there is a need for further investigations in order to unravel the biological outcomes of nanofood consumption. In the current review, we summarize the existing data on the (potential) use of ENMs in the food industry, information on the toxicity profiles of the commonly applied ENMs, such as metal (oxide) nanoparticles (NPs), address the potential food safety implications and health hazards connected with the consumption of nanofood. A number of health complications connected with the human exposure to ENMs are discussed, demonstrating that there is a real basis for the arisen concern not only connected with the gut health, but also with the potency to lead to systemic toxicity. The toxicological nature of hazard, exposure levels and risk to consumers from nanotechnology-derived food are on the earliest stage of investigation and this review also highlights the major gaps that need further research and regulation.

Trophic Transfer, Transformation, and Impact of Engineered Nanomaterials in Terrestrial Environments

Engineered nanomaterials (ENMs) are released into the environment with unknown implications in the food chain. Recent findings demonstrate that ENMs may accumulate and/or increase concentrations of the component metal or carbon nanomaterials in the fruits/grains of agricultural crops, have detrimental or beneficial effects on the agronomic traits, yield, and productivity of plants, induce modifications in the nutritional value of food crops, and transfer within trophic levels. Given this information, important questions needed to be resolved include a determination of actual or predicted concentrations of ENMs through the development of new and perhaps hybridized analytical tools, assessment of the nutritional content modifications and/or accumulation of ENMs, component metal, and cocontaminants in edible plants and their implications on human diet, nutrition, and health, assessment of the consequences of ENM-induced changes in soil health, physiological process, and yield on agricultural production and food security, and transfer of ENMs in trophic levels. Given the significant implications of ENMs exposure and the rather large knowledge gaps that exist, it will be prudent to observe judicious and targeted use of ENMs so as to minimize environmental release until a comprehensive environmental fate and effects assessment can be undertaken.