Use Of Cellulose Nanofibers Research Articles

Stiff as a Board: Perspectives on the Crystalline Modulus of Cellulose.

A viewpoint on the importance of the accurate determination of the crystal modulus of cellulose is given with respect to recent advances in extracting high modulus nanofibrils/fibers from plants and production by bacteria and animals. Often the modulus of these nanofibrils/fibers is assumed to be the same as the crystal modulus of cellulose. Both experimental and theoretical calculations of the crystal modulus of cellulose are discussed and put in context of the use of cellulose nanofibers for high stiffness composites. New research into the exact nature of the structure of cellulose nanofibers is suggested, with a view to better processing routes for realizing high modulus/low density materials.

Materials from Renewable Resources

AbstractThe drive for greater use of renewable materials is one that has recently gained momentum due to the need to rely less heavily on petroleum. These renewable materials are defined as such since they are derived from plant-based sources. Some renewable materials also offer properties that conventional materials cannot provide: hierarchical structure, environmental compatibility, low thermal expansion, and the ability to be modified chemically to suit custom-made applications. Nature's materials, particularly from plant- and animal-based polysaccharides and proteins, have hierarchical structures, and these structures can be utilized for conventional applications via biomimetic approaches. This issue begins with an article covering renewable polymers or plastics that can be used to generate block copolymers (where two polymers with specific functions are combined) as an alternative to conventional materials. Applications of renewable polymers, such as cellulose from plants, bacteria, and animal sources, are also covered. Also presented are the use of bacterial cellulose and other plant-based nanofibers for transparent electronic display screens and, in a wider sense, the use of cellulose nanofibers for composite materials, where renewable resources are required to generate larger amounts of material. Finally, this issue shows the use of biomimetic approaches to take the multifunctional properties of renewable materials and use these concepts, or the materials themselves, in conventional materials applications.

Preparation and characterization of poly(vinyl alcohol) nanocomposites made from cellulose nanofibers

AbstractA method using a combination of ball milling, acid hydrolysis, and ultrasound was developed to obtain a high yield of cellulose nanofibers from flax fibers and microcrystalline cellulose (MCC). Poly(vinyl alcohol) (PVA) nanocomposites were prepared with these additives by a solution‐casting technique. The cellulose nanofibers and nanocomposite films that were produced were characterized with Fourier transform infrared spectrometry, X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy, and transmission electron microscopy. Nanofibers derived from MCC were on average approximately 8 nm in diameter and 111 nm in length. The diameter of the cellulose nanofibers produced from flax fibers was approximately 9 nm, and the length was 141 nm. A significant enhancement of the thermal and mechanical properties was achieved with a small addition of cellulose nanofibers to the polymer matrix. Interestingly, the flax nanofibers had the same reinforcing effects as MCC nanofibers in the matrix. Dynamic mechanical analysis results indicated that the use of cellulose nanofibers (acid hydrolysis) induced a mechanical percolation phenomenon leading to outstanding and unusual mechanical properties through the formation of a rigid filler network in the PVA matrix. X‐ray diffraction showed that there was no significant change in the crystallinity of the PVA matrix with the incorporation of cellulose nanofibers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009