Use Of Toxicity Tests Research Articles

A Comparison of European Union and Turkish Reports on the Statistics of Experimental Animal Use in Toxicity Testing.

The data on the number of animals used for experimental purposes, with a particular focus on regulatory toxicity studies, in Turkey and EU member states plus Norway (EU+), were compared for the period 2015 to 2020 (UK data after Brexit for 2020 were included too). The total number of listed vertebrates used for regulatory toxicity testing in the full 6-year reporting period in Turkey was 3.6% of that reported for the EU+. However, these numbers showed an increasing trend over the reporting period in Turkey, while the trend decreased in the EU+. In the top three most-used species for regulatory toxicology purposes in Turkey, 41% were fish (68,758 animals), followed by rats (29%; 49,975 animals), and then mice (20%; 33,292 animals). Turkey used low numbers of cats and dogs, while the corresponding number for the EU+ was more than 70-fold higher. Non-human primates were not used at all in Turkey, whereas about 34,000 were used in EU+ laboratories. The majority of toxicity tests (57%) performed in Turkey were categorised as 'Other' toxicity tests, and 27% were acute and sub-acute toxicity tests. Successful replacement alternatives (e.g. in vitro and in silico approaches) are already used in a wide range of research areas. However, although this new research and testing paradigm is underpinned by scientific evidence, the legislation and pace of acceptance of these new techniques in Turkey is considerably lagging behind other countries.

Photocatalytic Degradation of Carbofuran in Water Using Laser-Treated TiO2: Parameters Influence Study, Cyto- and Phytotoxicity Assessment.

This study investigates the impact of changing parameters on the photocatalytic degradation of carbofuran (CBF) using laser-treated TiO2 nanotube arrays on a Ti mesh under simulated sunlight irradiation and assessing toxicity during photocatalytic degradation. Various parameters, including the stirring effect, light intensity, initial CBF concentration, and variation in the active surface area of laser-treated TiO2 photocatalysts, were examined to determine their impact on degradation efficiency. The photodegradation kinetics were monitored using ultra-performance liquid chromatography with a PDA detector (UPLC-PDA) and UV-Vis spectrophotometry, while mineralization was assessed by a total organic carbon (TOC) analyzer. The photocatalytic degradation of CBF is enhanced by an increase in the active surface area of the TiO2 photocatalyst, light intensity, and the introduction of stirring, but it decreases with an increase in the initial concentration of CBF. The toxicity assessments revealed that the cytotoxicity of CBF initially increased during the degradation process but decreased after further treatment, indicating the formation and subsequent breakdown of toxic intermediates. The phytotoxicity test showed that longer degradation times resulted in higher toxicity to plant growth. This study provides new insights into the photocatalytic degradation of CBF with TiO2, the importance of parameter optimization for more efficient treatment, and the use of toxicity tests to confirm the success of the photocatalytic process.

Guidelines for Manufacturing and Application of Organoids: Kidney.

Recent advancements in organoid technology have led to a vigorous movement towards utilizing it as a substitute for animal experiments. Organoid technology offers versatile applications, particularly in toxicity testing of pharmaceuticals or chemical substances. However, for the practical use in toxicity testing, minimal guidance is required to ensure reliability and relevance. This paper aims to provide minimal guidelines for practical uses of kidney organoids derived from human pluripotent stem cells as a toxicity evaluation model in vitro.

Ecotoxicology of sediment in the estuary of the Jundiaí and Potengi Rivers in Natal-RN, Brazil, by using Leptocheirus plumulosus as test-organism

The estuary of the Potengi and Jundiaí Rivers is situated on the coast of the state of Rio Grande do Norte, Brazil, and has a record of contamination by metals and organic contaminants. However, there are few studies regarding the toxic effects of pollution on the aquatic organisms from this area. The objective was to assess the quality of sediments from the Jundiaí and Potengi Rivers, by the use of toxicity tests with the amphipod Leptocheirus plumulosus. The sediments were collected from 4 sites, in 4 different months along 2011. After data analysis, it was possible to observe that the sediments collected close to the most populated areas of Macaíba and Natal (P1 and P3) were toxic. Sediment from the Station 4 did not show toxicity in any of the months studied, despite its urban location near the port of Natal. This result might be related to a low level of organic matter and greater tidal influence, which affect the dilution of the contaminants at this area and can reduce the sediment toxicity. No relationship between rainfall and environmental toxicity was observed.

Use of Toxicity Tests to Assess the Harmfulness of Selected Herbicides

Use of Toxicity Tests to Assess the Harmfulness of Selected Herbicides

Exploring Proton-Only NMR Experiments and Filters for Daphnia In Vivo: Potential and Limitations.

Environmental metabolomics provides insight into how anthropogenic activities have an impact on the health of an organism at the molecular level. Within this field, in vivo NMR stands out as a powerful tool for monitoring real-time changes in an organism's metabolome. Typically, these studies use 2D 13C-1H experiments on 13C-enriched organisms. Daphnia are the most studied species, given their widespread use in toxicity testing. However, with COVID-19 and other geopolitical factors, the cost of isotope enrichment increased ~6-7 fold over the last two years, making 13C-enriched cultures difficult to maintain. Thus, it is essential to revisit proton-only in vivo NMR and ask, "Can any metabolic information be obtained from Daphnia using proton-only experiments?". Two samples are considered here: living and whole reswollen organisms. A range of filters are tested, including relaxation, lipid suppression, multiple-quantum, J-coupling suppression, 2D 1H-1H experiments, selective experiments, and those exploiting intermolecular single-quantum coherence. While most filters improve the ex vivo spectra, only the most complex filters succeed in vivo. If non-enriched organisms must be used, then, DREAMTIME is recommended for targeted monitoring, while IP-iSQC was the only experiment that allowed non-targeted metabolite identification in vivo. This paper is critically important as it documents not just the experiments that succeed in vivo but also those that fail and demonstrates first-hand the difficulties associated with proton-only in vivo NMR.

Evaluation of the South American gastropod Heleobia parchappii as test organism in cadmium toxicity bioassays

Gastropods are abundant key components in freshwater ecosystems, many of which are affected by anthropogenic activities. The genus Heleobia is widely distributed across Argentina, and the native Heleobia parchappii is very common in the Pampean Region. The identification of native candidate species for toxicity testing is gaining increasing interest. The objectives of the present study were to evaluate 1) the susceptibility of H. parchappii to a reference toxicant (Cl2Cd), and 2) its suitability for toxicity testing by estimating LC50. Also, we discussed the applicability of the proposed protocol. Snail sensitivity was assessed by exposure to concentrations between 0.5 and 12 mg Cd/L under acute static conditions during 72 h (exposure period). Then, snails were transferred to the control medium for 24 h (post-exposure period) and checked for recovery and those not responding to stimulation were considered to be dead. The endpoints were snail immobilization (recorded every 24 h during the exposure period) and mortality at the end of the post-exposure period. Snail sensitivity was analyzed with a generalized linear mixed model (GLMM) and LC50 (lethal concentration 50%) was calculated using probit analysis. Results indicated that the number of immobilized snails increased with increasing concentration. The toxic effect of Cd on snails persisted 24 h after exposure. The LC50 was 2.145 (1.675-2.641) mg Cd/L. The sensitivity of H. parchappii was similar to that reported for other freshwater standard species, supporting its suitability as test organism. The protocol was appropriate for use in toxicity testing as it is simple, inexpensive and reproducible.

Evaluation of the genotoxic potential of water impacted by acid mine drainage from a coal mine in Mpumalanga, South Africa, using the Ames test and Comet assay

Several potential genotoxins found in water samples arise from anthropogenic activities. Acid mine effluent resulting from coal mining poses serious environment concerns all over the world. The use of toxicity tests to evaluate the quality of streams add value by providing site-specific toxicological data. Treatment systems such as the use of natural wetlands (passive) or conventional physical and chemical pH-neutralised processes (active) are employed mainly to meet certain water quality guidelines. Nonetheless, potential genotoxins or residues remain which influence the quality of discharged effluents. The objective of this study was to evaluate the genotoxic potential of acid mine drainage (AMD) released into a natural stream following treatment by passive and active methods. This study aimed to identify the extent of AMD mutagenicity and genotoxicity to African Vero monkey kidney cell line and a fish gill cell line (RTgill-W1) using two assays, the Ames test, and the comet assay, as a rapid and effective screening tool. The Ames test performed without metabolic activation using Salmonella typhimurium TA98 and TA100 strains showed no indication of mutagenicity in the water samples tested. Differing results were however obtained for the comet assay using the African Vero monkey kidney cell line and a fish gill cell line (Rtgill-W1), which revealed DNA fragmentation and variations in morphologies indicative of genotoxicity in the water samples following the two treatment processes. A significant reduction in DNA damage was observed in water samples following active treatment of the AMD, evidenced by reduced damage frequency and a lowered comet score. This bioassay confirms the urgency of integrating high-throughput screening in aquatic toxicity assessment at genetic levels, giving further evidence that in-vitro bioassays can be incorporated for use in short-term genotoxicity assays. The result suggests that the comet assay proved sensitive at detecting genotoxicity, supporting the integration of this into environmental monitoring frameworks targeted at AMD-contaminated sites.

Use of the kinetically-derived maximum dose concept in selection of top doses for toxicity studies hampers proper hazard assessment and risk management

The KMD (kinetically-derived maximum dose) is an increasingly advocated concept that uses toxicokinetic data in the top dose selection for toxicity testing. Application of this concept may have serious regulatory implications though, especially in the European Union. The basic assumption is that the relationship between internal and external dose (IED) shows an inflection point where linearity transits into non-linearity due to saturation of underlying processes; top doses in toxicity tests should not be above the inflection point, provided human exposures are well below this point. A critical analysis of the KMD concept and its underlying assumptions shows, however, that the IED relationship is non-linear over the whole dose range, without any point of inflection. The KMD concept thus aims to estimate a non-existing point, rendering it invalid for use in toxicity testing. Moreover, the concept ignores the key question in toxicology: What kind of toxic effects occur at which doses? These and several other reservations against the KMD concept are discussed and illustrated with three existing applications of the KMD approach. Hence, we recommend to abolish the KMD concept for selecting top doses in toxicity testing. This requires the updating of regulations, guidance documents and OECD test guidelines.

Advances in Human Induced Pluripotent Stem Cell-Derived Hepatocytes for Use in Toxicity Testing

Induced pluripotent stem cells (iPSCs) can be differentiated into multiple cell types in the body while maintaining proliferative capabilities. The generation of hepatocyte-like cells (HLCs) from iPSCs has resulted in a new source for liver cells. Since healthy primary human hepatocytes and hepatic cells are difficult to obtain, HLCs are gaining attention. HLCs can be obtained from a continuous, stable source while maintaining their original donor genotype, which opens new avenues into patient-specific testing and therapeutics. Studies have utilized HLCs for toxicity testing to further understand their drug metabolizing capabilities. This review focuses on advances being made to achieve hepatic functions from HLCs, their current use in hepatotoxicity testing, and their potential for future liver-related toxicity evaluations.

In vitro larval rearing protocol for the stingless bee species Melipona scutellaris for toxicological studies.

Brazil has the highest biodiversity of native stingless bees in the world. However, Brazilian regulations are based on protocols standardized by the Organization for Economic Cooperation and Development (OECD), which uses Apis mellifera as a model organism. The safety of the use of an exotic species as a substitute for a native species is a problem that concerns members of the academy and the government agencies responsible for studies of this nature in the neotropical regions where there are occurrences of stingless bee species. Regarding the exposure of larvae to pesticides, several indicators suggest that the same rearing method for A. mellifera cannot be applied to stingless bees, mainly because of their different feeding systems. Thus, it is necessary to establish an in vitro rearing method for native social bees. We developed a larval rearing method for the stingless bee species Melipona scutellaris and evaluated parameters such as the defecation rate, pupation, emergence, mortality and morphometry of the newly emerged workers. The control was represented by the morphometry of individuals that emerged from natural combs (in vivo). In addition, we determined the average lethal concentration (LC50) of the insecticide dimethoate, the standard active ingredient used for the validation of toxicity tests. Procedures conducted prior to the in vitro bioassays allowed us to obtain the actual dimensions of the rearing cells for making acrylic plates for use in establishing how much each larva consumes during its development, that is, determining how much larval food should be placed in every artificial cell. Tests performed with M. scutellaris indicated an average of 80.2% emergence of individuals relative to the larvae, 92.61% relative to the pupae and a mean of 7.42% larval mortality. The mean of the intertegular distance, head width and wing asymmetry parameters were not significantly different between individuals from the in vitro and in vivo rearing methods. The LC50 value determined was 27.48 ng dimethoate / μL diet. The method described for M. scutellaris showed development rates above OECD standards, which requires at least 75% emergence, and produced newly emerged workers with similar dimensions to those produced under natural conditions; thus these results enable their use as a rearing protocol for this species (or genus) and, consequently, their use in toxicity tests. The results produced with M. scutellaris are the first steps for a proposed toxicity test protocol for stingless bee larvae that can be standardized and included as a protocol in the OECD.

Review: ecotoxicity of organic and organo-metallic antifouling co-biocides and implications for environmental hazard and risk assessments in aquatic ecosystems

Hazard assessments of Irgarol 1051, diuron, 2-(thiocyanomethylthio)benzothiazole (TCMTB), dichloro-octylisothiazolin (DCOIT), chlorothalonil, dichlofluanid, thiram, zinc pyrithione, copper pyrithione, triphenylborane pyridine (TPBP), capsaicin, nonivamide, tralopyril and medetomidine were performed to establish robust environmental quality standards (EQS), based on predicted no effect concentrations (PNECs). Microalgae, zooplankton, fish and amphibians were the most sensitive ecological groups to all the antifoulants evaluated, especially in the early life stages. No differences were identified between freshwater and seawater species. The use of toxicity tests with non-standard species is encouraged because they increase the datasets, allowing EQS to be derived from probabilistic-based PNECs whilst reducing uncertainties. The global ban of tributyltin (TBT) has been heralded as a major environmental success; however, substitute antifoulants may also pose risks to aquatic ecosystems. Environmental risk assessments (ERAs) have driven decision-makings for regulating antifouling products, but in many countries there is still a lack of regulation of antifouling biocides which should be addressed.

OECD aims to lower costs, animal use in toxicity tests

The Organization for Economic Cooperation & Development (OECD) is promoting a method to decrease the cost of chemical toxicity testing and the use of animals in such tests. The Paris-based organization, which serves as a forum for governments to find solutions to global problems, released voluntary guidance on March 22 to help regulators and scientists incorporate toxicity pathways into chemical hazard assessments. The method uses “adverse outcome pathways,” defined as a series of events initiated by exposure to a chemical. Such events can result in effects at the molecular, cellular, organ, organism, or population level. By unraveling the sequences of key events, scientists can better understand how chemicals exert their toxicity. High-throughput, cell-based assays and other alternative toxicity tests that don’t rely on animals should be based on knowledge of these mechanisms, the guidance states. OECD is working with the U.S. EPA and the European Commission’s Joint Research Centre to

Effects of Cylindrospermopsis raciborskii strains (Woloszynska, 1912) Senayya & Subba Raju on the mobility of Daphnia laevis (Cladocera, Daphniidae).

Cylindrospermopsis raciborskii is a cyanobacterium distributed worldwide that is known to produce cyanotoxins. Some of the Brazilian strains can produce saxitoxins (STXs), which are classified as neurotoxins and can paralyze cladocerans .Daphnia laevis is a cladoceran with a wide distribution in the Americas and has been studied as a possible test-organism in toxicity bioassays. The present work tested the acute effect on D laevis mobility when fed a saxitoxin-producing (STX and neoSTX) C. raciborskii strain, CYRF-01, and compared the results with the effects of a non-toxic strain (NPCS-1). Neonates (6-24 hours after birth) were exposed to concentrations of C. raciborskii varying from 102 to 106 cells·mL-1 of each strain for up to three hours. The cladocerans were then transferred to a medium without toxic filaments for 24 hours. Only the organisms exposed to the STX-producing strain showed signs of the immobilization of swimming movements, confirming the effects of the toxins. There was a linear correlation between the time required to induce stopping the swimming movement, with a shorter time to needed to induce immobilization at a higher the concentration; this correlation was inverse to the time required to recover the swimming movements (longer at higher concentrations, p < 0.1). D. laevis is a tropical and subtropical species with great potential for use in toxicity tests for the detection of STXs, despite being native to and found in a great array of freshwater bodies. This is the first assay testing STX-producing and non-producing C. raciborskii strains on D. laevis, species that are both found in Brazilian ecosystems.

Synthesis and toxicity testing of cysteine-functionalized single-walled carbon nanotubes with Caenorhabditis elegans

As carbon nanotubes are incorporated into commercial products in ever-increasing amounts, it is important to produce nontoxic nanotubes and have a reliable method for testing their toxicity. This article reports the synthesis and characterization of cysteine-functionalized single-walled carbon nanotubes and the usefulness of toxicity tests employing the nematode Caenorhabditis elegans. The cysteine-functionalized nanotubes have good aqueous solubility and are nontoxic to C. elegans. Additionally, the cysteine-functionalized nanotubes are shown to be capable of delivering a pharmaceutical compound through a cleavable disulfide bond. This work presents a straightforward synthesis of an easily synthesized, biocompatible carbon nanotube that will have applications in biomedicine.

Perspectives of the Development Strategies for a Future Toxicity Testing System in China: Challenges and Opportunities

Perspectives of the Development Strategies for a Future Toxicity Testing System in China: Challenges and Opportunities

COMPARING SORPTION BEHAVIOR OF PYRETHROIDS BETWEEN FORMULATED AND NATURAL SEDIMENTS

Formulated sediments are recommended for use in toxicity tests to achieve standardized evaluations. However, the organic matter used in formulated sediments may differ qualitatively from that in natural sediments, which may lead to different chemical partition patterns and, hence, different toxicity effects. By deriving partition coefficients for organic carbon and dissolved organic carbon (K(OC) and K(DOC) , respectively) for eight pyrethroid insecticides from three formulated and five natural sediments, the authors characterized the differences between formulated and natural sediments in pesticide sorption. For all pyrethroids, the mean values of K(OC) and K(DOC) of formulated sediments were two to three, and three to 10 times smaller than those of natural sediments, respectively. The two formulated sediments containing α-cellulose or Manitoba peat showed significantly (p<0.0001) smaller K(OC) and K(DOC) values than natural sediments based on statistical analyses, while the difference was not significant for the formulated sediment containing New Brunswick peat. The K(OC) values were closely correlated (p<0.001) with soot carbon content, while the amount of carboxylic or phenolic functional groups may have affected K(DOC) . Therefore, the source and quality of organic matter are likely the most important factors in formulated sediments and must be standardized to provide consistency in sediment toxicity tests.

Hypothermal and hyperthermal acclimation differentially modulate cadmium accumulation and toxicity in the zebrafish

Despite the fact that aquatic organisms are mostly poikilothermic and environmental temperature variations can have considerable impact on chemical toxicity, toxicity studies are mainly performed at the species’ specific standard or optimal temperature. Since the zebrafish is a recommended test species for use in toxicity tests, we investigated the temperature dependence of 96h cadmium accumulation and toxicity in zebrafish acclimated to 18, 26, 30 or 34°C. Zebrafish showed high cadmium tolerance with acute 96h LC50 values of 121.5, 102.4, 124.6 and 126.7μM at 18, 26, 30 and 34°C respectively. Differences in cadmium toxicity at the different temperatures were small and toxicity did not increase with increasing temperature as is often suggested. We did however observe an interesting concentration dependent crossover pattern in which the temperature dependence at the highest exposure concentrations was exactly opposite to the pattern at the lower concentrations. At the highest concentrations the following order of toxicity was observed: 26°C>18°C>30°C>34°C. Possibly, either the warm acclimation provoked a general stress response which protected organisms against future severe stress situations, or resulted in specific defence mechanisms which also provided protection against cadmium exposure. Although at 18°C cadmium accumulation decreased more than would be expected based on the metabolic rate, cadmium toxicity was not proportionately decreased. This increased cadmium sensitivity in the cold was likely due to the combined effect of low temperature and cadmium exposure on sodium loss. This study shows that the temperature dependence of cadmium toxicity results from the combination of altered cadmium accumulation and sensitivity. Inclusion of the temperature effect in the calculation of environmental quality standards may have to be considered to ensure that more sensitive species are also protected at suboptimal temperatures.

Perspectives on validation of high-throughput assays supporting 21st century toxicity testing.

In vitro high-throughput screening (HTS) assays are seeing increasing use in toxicity testing. HTS assays can simultaneously test many chemicals but have seen limited use in the regulatory arena, in part because of the need to undergo rigorous, time-consuming formal validation. Here we discuss streamlining the validation process, specifically for prioritization applications. By prioritization, we mean a process in which less complex, less expensive, and faster assays are used to prioritize which chemicals are subjected first to more complex, expensive, and slower guideline assays. Data from the HTS prioritization assays is intended to provide a priori evidence that certain chemicals have the potential to lead to the types of adverse effects that the guideline tests are assessing. The need for such prioritization approaches is driven by the fact that there are tens of thousands of chemicals to which people are exposed, but the yearly throughput of most guideline assays is small in comparison. The streamlined validation process would continue to ensure the reliability and relevance of assays for this application. We discuss the following practical guidelines: (1) follow current validation practice to the extent possible and practical; (2) make increased use of reference compounds to better demonstrate assay reliability and relevance; (3) de-emphasize the need for cross-laboratory testing; and (4) implement a web-based, transparent, and expedited peer review process.

Critical evaluation and further development of methods for testing ecotoxicity at multiple pH using Daphnia magna and Pseudokirchneriella subcapitata

To meet the requirements of risk assessment legislature regarding the ecotoxicity of ionizing compounds, the present study attempts to establish easy, robust methods for testing ecotoxicity at various pH levels. An overview is given of the buffering methods found in the literature. This is supplemented by a series of experiments where toxicity and ability to stabilize pH of seven common buffering compounds was tested on Daphnia magna and Pseudokirchneriella subcapitata. We consider a buffer applicable at a given concentration if the pH drift is below 0.2 pH units, and if there are no toxic effects. Twenty-four- and 48-h acute toxicity tests with D. magna were carried on a series of organic buffers with pH monitoring. Based on the experimental results it is possible to give recommendations for buffer concentrations for use in toxicity testing with D. magna at pH levels in the range of pH 6.0-7.8 for 48 h exposure, and pH 6.0-9.5 for 24 h exposure. Forty-eight- and 72-h growth inhibition tests with P. subcapitata were carried out, and recommendations for buffer concentrations at pH 7.5 and 8.0 are made for both 48 and 72 h of exposure.