Urban Air Samples Research Articles

Retention and Determination of Polycyclic Aromatic Hydrocarbons from Urban Air Based on Recycled Polyurethane Foam Modified with Expanded Polystyrene

Expanded polystyrene (EPS) and polyurethane foams (PUFs) are widely produced and used due to their properties and, recently, it has been described that polystyrene present π–π interactions. Therefore, this work proposes to use recycled EPS to modify the surface of PUFs for the retention of 12 polycyclic aromatic hydrocarbons (PAHs) in air samples. PUF cylinders were modified with recycled polystyrene and characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, and affinity experiments. The proposed material is suitable for the retention-elution of PAHs from air samples, and can be incorporated to liquid chromatography generating a quantitative methodology. This methodology is efficient, fast and use lower volumes of organic solvents compared with other methodologies. Eighteen urban air samples were collected and analyzed weekly, using principal component analysis (PCA), and a relation between meteorological parameters and concentration of PAHs was observed.

Determination of the gas/particle phase concentrations of PCBs in urban and rural atmosphere in Erzurum, Turkey.

Active sampling was conducted for the first time in Erzurum, Turkey, between August 2012 and January 2013, in order to investigate the presence of 82 polychlorinated biphenyls (PCBs) congeners. Urban and rural ambient air samples, including gas and particle phase atmospheric concentrations (GAPPACs) of PCBs, were collected simultaneously using high volume air sampler (HVAS) at two different sampling points of Erzurum. GAPPACs of PCB samples taken using HVAS in Palandöken Mountain Region (2565m) and Ataturk University Campus (1870m) were analyzed in GC-MS following appropriate extraction steps. Throughout the sampling period, total ambient air concentrations (gas phase + particulate phase) were 10 ± 6 and 27 ± 13pg/m3 (mean) for Palandöken Mountain Region (PMR) and Atatürk University Campus (AUC), respectively. Low molecular weighted PCBs were found to be dominant in both rural an urban sampling sites. Meteorological parameters especially temperature (from Clausius-Clapeyron equation), wind direction, wind velocity, and precipitation were found to be effective on PCB concentration and distribution. The gas-particle distributions of PCBs in the summer and winter period were found to be 82% (gas phase) and 18% (particle phase) in the PMR and 90% (gas phase) and 10% (particle phase) in AUC, through Junge-Pankow adsorption model. In the light of these findings, total PCB concentrations detected in urban atmosphere (due to possible PCB sources) were observed to be higher than those determined in rural area.

Heavy metals, PAHs and POPs in recycled polyethylene samples of agricultural, post-commercial, post-industrial and post-consumer origin

In the present work, recycled polyethylene (LDPE) samples of agricultural, post-commercial, post-industrial and post-consumer origin were selected and analysed. The analysis comprised the determination of different contaminants such as metals, polycyclic aromatic hydrocarbons (PAHs), dioxin-like biphenyl polychlorides (PCBs), and polychlorinated-dibenzo-p-dioxins and furans (PCDD/Fs). A comparison with one sample of virgin plastic (unrecycled) was performed. The study aimed at stressing the importance of this type of analysis in recycled plastics. Indeed, such an examination will determine the material’s final destination, and the possible origin of the pollutants analysed is investigated. Black post-industrial and post-consumer samples presented the highest concentration of PCBs and PCDD/Fs, attaining a maximum value of 2.40 pg WHO-TEQ/g, while the least toxic sample (post-commercial) presented a toxicity of 0.38 pg WHO-TEQ/g. PAHs content was also much higher in black samples, reaching 514.41 ng/g, while the lowest concentrations were obtained for the post-commercial plastic sample, which did not exceed 38.98 ng/g. The higher PAHs concentrations in the black samples were related to the carbon black content of the black samples, which was 2.00% for black post-industrial sample and 1.51% for post-consumer sample. The PCDD/Fs congener profile observed in almost all samples was very similar to the profile found in the literature on urban air samples, indicating that the plastic is mainly influenced by the environment. The presence of some metals (mainly copper) showed a slight correlation with PCDD/Fs content. The pollutants analysed were found to be significantly reduced during the cleaning processes that are generally carried out in recycling companies.

Inhalable antibiotic resistomes emitted from hospitals: metagenomic insights into bacterial hosts, clinical relevance, and environmental risks

BackgroundThreats of antimicrobial resistance (AMR) to human health are on the rise worldwide. Airborne fine particulate matter (PM2.5), especially those emitted from hospitals, could serve as a substantial yet lesser-known environmental medium of inhalable antibiotic resistomes. A genome-centric understanding of the hosting bacterial taxa, mobility potential, and consequent risks of the resistomes is needed to reveal the health relevance of PM2.5-associated AMR from clinical settings.ResultsCompared to urban ambient air PM2.5, the hospital samples harbored nearly twice the abundance of antibiotic resistantance genes (ARGs, ~ 0.2 log10(ARGs/16S rRNA gene)) in the summer and winter sampled. The profiled resistome was closely correlated with the human-source-influenced (~ 30% of the contribution) bacterial community (Procrustes test, P < 0.001), reflecting the potential antibiotic-resistant bacteria (PARB), such as the human commensals Staphylococcus spp. and Corynebacterium spp. Despite the reduced abundance and diversity of the assembled metagenomes from summer to winter, the high horizontal transfer potential of ARGs, such as the clinically relevant blaOXA and bacA, in the human virulent PARB remained unaffected in the hospital air PM samples. The occurring patterns of β-lactam resistance genes and their hosting genomes in the studied hospital-emitting PM2.5 were closely related to the in-ward β-lactam-resistant infections (SEM, std = 0.62, P < 0.01). Featured with more abundant potentially virulent PARB (2.89 genome copies/m3-air), the hospital samples had significantly higher resistome risk index scores than the urban ambient air samples, indicating that daily human exposure to virulent PARB via the inhalation of PM2.5 was ten times greater than from the ingestion of drinking water.ConclusionsThe significance of AMR in the studied hospital-emitting PM2.5 was highlighted by the greater abundance of ARGs, the prevalence of potentially virulent PARB, and the close association with hospital in-ward β-lactam infections. A larger-scale multi-source comparison of genome-resolved antibiotic resistomes is needed to provide a more holistic understanding to evaluate the importance of airborne AMR from the “One-Health” perspective.39Xa41gPReog5Lijw58oAnVideo

Detection of antimicrobial resistance genes in urban air.

To understand antibiotic resistance in pathogenic bacteria, we need to monitor environmental microbes as reservoirs of antimicrobial resistance genes (ARGs). These bacteria are present in the air and can be investigated with the whole metagenome shotgun sequencing approach. This study aimed to investigate the feasibility of a method for metagenomic analysis of microbial composition and ARGs in the outdoor air. Air samples were collected with a Harvard impactor in the PM10 range at 50 m from a hospital in Budapest. From the DNA yielded from samples of PM10 fraction single‐end reads were generated with an Ion Torrent sequencer. During the metagenomic analysis, reads were classified taxonomically. The core bacteriome was defined. Reads were assembled to contigs and the ARG content was analyzed. The dominant genera in the core bacteriome were Bacillus, Acinetobacter, Leclercia and Paenibacillus. Among the identified ARGs best hits were vanRA, Bla1, mphL, Escherichia coli EF‐Tu mutants conferring resistance to pulvomycin; BcI, FosB, and mphM. Despite the low DNA content of the samples of PM10 fraction, the number of detected airborne ARGs was surprisingly high.

The Multi-Fungicide Resistance Status of Aspergillus fumigatus Populations in Arable Soils and the Wider European Environment.

The evolution and spread of pan-azole resistance alleles in clinical and environmental isolates of Aspergillus fumigatus is a global human health concern. The identification of hotspots for azole resistance development in the wider environment can inform optimal measures to counteract further spread by minimizing exposure to azole fungicides and reducing inoculum build-up and pathogen dispersal. We investigated the fungicide sensitivity status of soil populations sampled from arable crops and the wider environment and compared these with urban airborne populations. Low levels of azole resistance were observed for isolates carrying the CYP51A variant F46Y/M172V/E427K, all belonging to a cluster of related cell surface protein (CSP) types which included t07, t08, t13, t15, t19, and t02B, a new allele. High levels of resistance were found in soil isolates carrying CYP51A variants TR34/L98H and TR46/Y121F/T289A, all belonging to CSP types t01, t02, t04B, or t11. TR46/Y121F/M172V/T289A/G448S (CSP t01) and TR46/Y121F/T289A/S363P/I364V/G448S (CSP t01), a new haplotype associated with high levels of resistance, were isolated from Dutch urban air samples, indicating azole resistance evolution is ongoing. Based on low numbers of pan-azole resistant isolates and lack of new genotypes in soils of fungicide-treated commercial and experimental wheat crops, we consider arable crop production as a coldspot for azole resistance development, in contrast to previously reported flower bulb waste heaps. This study also shows that, in addition to azole resistance, several lineages of A. fumigatus carrying TR-based CYP51A variants have also developed acquired resistance to methyl benzimidazole carbamate, quinone outside inhibitor and succinate dehydrogenase (Sdh) inhibitor fungicides through target-site alterations in the corresponding fungicide target proteins; beta-tubulin (F200Y), cytochrome b (G143A), and Sdh subunit B (H270Y and H270R), respectively. Molecular typing showed that several multi-fungicide resistant strains found in agricultural soils in this study were clonal as identical isolates have been found earlier in the environment and/or in patients. Further research on the spread of different fungicide-resistant alleles from the wider environment to patients and vice versa can inform optimal practices to tackle the further spread of antifungal resistance in A. fumigatus populations and to safeguard the efficacy of azoles for future treatment of invasive aspergillosis.

Air Microbiome and Pollution: Composition and Potential Effects on Human Health, Including SARS Coronavirus Infection.

Polluted air poses a significant threat to human health. Exposure to particulate matter (PM) and harmful gases contributes to cardiovascular and respiratory diseases, including allergies and obstructive lung disease. Air pollution may also be linked to cancer and reduced life expectancy. Uptake of PM has been shown to cause pathological changes in the intestinal microbiota in mice and humans. Less is known about the effects of pollution-associated microbiota on human health. Several recent studies described the microbiomes of urban and rural air samples, of the stratosphere and sand particles, which can be transported over long distances, as well as the air of indoor environments. Here, we summarize the current knowledge on airborne bacterial, viral, and fungal communities and discuss their potential consequences on human health. The current data suggest that bacterial pathogens are typically too sparse and short-lived in air to pose a significant risk for infecting healthy people. However, airborne fungal spores may exacerbate allergies and asthma. Little information is available on viruses including phages, and future studies are likely to detect known and novel viruses with a yet unknown impact on human health. Furthermore, varying experimental protocols have been employed in the recent microbiome and virome studies. Therefore, standardized methodologies will be required to allow for better comparisons between studies. Air pollution has been linked to more severe outcomes of SARS (severe acute respiratory syndrome) coronavirus (SARS-CoV) infections. This may have contributed to severe SARS-CoV-2 outbreaks, especially those in China, Northern Italy, Iran, and New York City.

Polyurethane foam-based passive air sampling for simultaneous determination of POP- and PAH-related compounds: A case study in informal waste processing and urban areas, northern Vietnam

Polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), hexabromobiphenyl (BB-153), novel brominated flame retardants (NBFRs), and unsubstituted/methylated polycyclic aromatic hydrocarbons (PAHs/Me-PAHs) were simultaneously monitored in the air samples collected from Vietnamese urban and vehicular waste processing areas by using polyurethane foam-based passive air sampling (PUF–PAS) method. Concentrations (pg m−3) of organic pollutants decreased in the order: PAHs (median 29,000; range 5100–100,000) > Me-PAHs (6000; 1000–33,000) > PCBs (480; 170–1100) > PBDEs (11; 5.3–86) > NBFRs (0.20; n. d. – 51) > BB-153 (n.d.). The difference in total PCB and PBDE concentrations between the urban and waste processing air samples was not statistically significant. Meanwhile, levels of PAHs, Me-PAHs, benzo [a]pyrene equivalents (BaP-EQs), and toxic equivalents of dioxin-like PCBs (WHO-TEQs) were much higher in the waste processing sites. This is the first report on the abundance of mono- and di-CBs (notably CB-11) in the air from a developing country, suggesting their roles as emerging and ubiquitous air pollutants. Our results have indicated potential sources of specific organic pollutants such as dioxin-like PCBs, PAHs, and Me-PAHs from improper treatment of end-of-life vehicles and other vehicle related materials (e.g., waste oils and rubber tires), as well as current emission of PCBs and PBDEs in the urban area in Vietnam. Further atmospheric monitoring studies should be conducted in this developing country that cover both legacy and emerging contaminants with a focus on areas affected by rapid urbanization and informal waste processing activities.

Determination of short-chain chlorinated paraffins using comprehensive two-dimensional gas chromatography coupled with low resolution mass spectrometry

Short-chain chlorinated paraffins (SCCPs), recently listed as Persistent Organic Pollutants (POPs) under the Stockholm Convention, are contained in commercial chlorinated paraffin (CP) products, which are used in industries such as metalworking fluids, sealants, and textiles. A novel method to determine SCCPs by comprehensive two-dimensional gas chromatography coupled with low resolution mass spectrometry was developed. Calibration curves of response factor versus chlorine content in two chlorine content ranges (R2 were 0.9544 and 0.9736, respectively) were used for quantification of SCCP total concentration. Moreover, relative concentrations of 24 congener groups were also theoretically calculated. Results showed that this method was able to detect SCCP concentration in commercial CP products and urban air samples. SCCP contribution varied largely among different CP products, which is highly determined by carbon chain distribution in paraffins. SCCP concentration in urban air ranged between 12.8–49.1 ng m−3 during nine-month sampling period. The highest SCCP concentration appeared in summer, and the lowest concentration occurred in winter. Gas phase was dominantly occupied by lighter congeners such as C10 group and Cl6 group, while heavier congeners such as C13 group and Cl7 and Cl8 groups contributed more in particle phase.

Traditional and novel halogenated flame retardants in urban ambient air: Gas-particle partitioning, size distribution and health implications

Urban ambient air samples, including gas-phase (PUF), total suspended particulates (TSP), PM10, PM2.5 and PM1 airborne particle fractions were collected to evaluate gas-particle partitioning and size particle distribution of traditional and novel halogenated flame retardants. Simultaneously, passive air samplers (PAS) were deployed in the same location. Analytes included 33 polybrominated diphenyl ether (PBDE), 2,2′,4,4′,5,5′-hexabromobiphenyl (BB-153), hexabromobenzene (HBB), pentabromoethylbenzene (PBEB), 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE), decabromodiphenyl ethane (DBDPE), dechloranes (Dec 602, 603, 604, 605 or Dechorane plus (DP)) and chlordane plus (CP). Clausius-Clapeyron equation, gas-particle partition coefficient (Kp), fraction partitioned onto particles (φ) and human respiratory risk assessment were used to evaluate local or long-distance transport sources, gas-particle partitioning sorption mechanisms, and implications for health, respectively. PBDEs were the FR with the highest levels (13.9pgm−3, median TSP+PUF), followed by DP (1.56pgm−3), mirex (0.78pgm−3), PBEB (0.05pgm−3), and BB-153 (0.04pgm−3). PBDE congener pattern in particulate matter was dominated by BDE-209, while the contribution of more volatile congeners, BDE-28, -47, -99, and -100 was higher in gas-phase. Congener contribution increases with particle size and bromination degree, being BDE-47 mostly bounded to particles≤PM1, BDE-99 to > PM1 and BDE-209 to > PM2.5. No significant differences were found for PBDE and DP concentrations obtained with passive and active samplers, demonstrating the ability of the formers to collect particulate material. Deposition efficiencies and fluxes on inhaled PBDEs and DP in human respiratory tract were calculated. Contribution in respiratory track was dominated by head airway (2.16 and 0.26pgh−1, for PBDE and DP), followed by tracheobronchial (0.12 and 0.02pgh−1) and alveoli (0.01–0.002pgh−1) regions. Finally, hazard quotient values on inhalation were proposed (6.3×10−7 and 1.1×10−8 for PBDEs and DP), reflecting a low cancer risk through inhalation.

Gas/particle partitioning and particle size distribution of PCDD/Fs and PCBs in urban ambient air

Urban ambient air samples, including gas-phase (PUF), total suspended particulates (TSP), PM10, PM2.5 and PM1 airborne particle fractions were collected to evaluate gas-particle partitioning and size particle distribution of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and polychlorinated biphenyls (PCBs). Clausius-Clapeyron equation, regressions of logKp vs logPL and logKOA, and human respiratory risk assessment were used to evaluate local or long-distance transport sources, gas-particle partitioning sorption mechanisms, and implications for health. Total ambient air levels (gas phase+particulate phase) of TPCBs and TPCDD/Fs, were 437 and 0.07pgm−3 (median), respectively. Levels of PCDD/F in the gas phase (0.004–0.14pgm−3, range) were significantly (p<0.05) lower than those found in the particulate phase (0.02–0.34pgm−3). The concentrations of PCDD/Fs were higher in winter. In contrast, PCBs were mainly associated to the gas phase, and displayed maximum levels in warm seasons, probably due to an increase in evaporation rates, supported by significant and strong positive dependence on temperature observed for several congeners. No significant differences in PCDD/Fs and PCBs concentrations were detected between the different particle size fractions considered (TSP, PM10, PM2.5 and PM1), reflecting that these chemicals are mainly bounded to PM1. The toxic content of samples was also evaluated. Total toxicity (PUF+TSP) attributable to dl-PCBs (13.4fg-TEQ05 m−3, median) was higher than those reported for PCDD/Fs (6.26fg-TEQ05 m−3). The inhalation risk assessment concluded that the inhalation of PCDD/Fs and dl-PCBs pose a low cancer risk in the studied area.

Assessment of Source Profile of Nonmethane Hydrocarbon in the Ambient Air of Metro City Delhi, India

In this paper presents the assessment of source profile of nonmethane hydrocarbons (NMHCs) in the ambient air of Delhi. The samples were collected from five different urban sites using tedlar bags for aliphatic NMHCs and activated adsorption charcoal tubes for aromatic NMHCs during October 2014 to September 2015. Eleven aliphatic NMHCs propane, n-butane i-butene, i-butane, 1,3-butadiene, trans-2-butene, cis-2-pentene, n-pentane, n-hexane, heptane and four aromatic NMHCs benzene, toluene, o-xylene, p/m-xylene were identified in 112 urban ambient air samples. Samples were analysed using gas chromatography which is coupled with flame ionization detector (GC-FID). Pearson correlation coefficient (r) found to be = 0.5±0.2, shows significance level to have moderate among the NMHCs, indicates NMHCs in the urban ambient air have many sources profile mentioned in PCA result. Factor analysis(FA) and receptor model, i.e., Principal Component Analysis(PCA)/Absolute Principal Component Score (APCS) was used for identification of source profile distribution. PCA analysis after the varimax rotation have identified six possible source profile and explained about 70 % of the total dataset. The average % contribution of NMHCs emitted from vehicles was found to be 23%, whereas polymer manufacturing industries contributes 19% and from refinery operation/ gas station contribute 14%, and 13%, emitted from flare emissions and 10% from natural gas emissions. The secondary industrial process, including paints, body soaps and metal fabricator and processing was contributing 8%. Out of these remaining 13% was estimated as unidentified sources. These findings may be used by government authorities to formulate policies and strategies for improvement of urban air quality that can improve the health of urban communities.

Validation of the Hirst-Type Spore Trap for Simultaneous Monitoring of Prokaryotic and Eukaryotic Biodiversities in Urban Air Samples by Next-Generation Sequencing.

Pollen, fungi, and bacteria are the main microscopic biological entities present in outdoor air, causing allergy symptoms and disease transmission and having a significant role in atmosphere dynamics. Despite their relevance, a method for monitoring simultaneously these biological particles in metropolitan environments has not yet been developed. Here, we assessed the use of the Hirst-type spore trap to characterize the global airborne biota by high-throughput DNA sequencing, selecting regions of the 16S rRNA gene and internal transcribed spacer for the taxonomic assignment. We showed that aerobiological communities are well represented by this approach. The operational taxonomic units (OTUs) of two traps working synchronically compiled >87% of the total relative abundance for bacterial diversity collected in each sampler, >89% for fungi, and >97% for pollen. We found a good correspondence between traditional characterization by microscopy and genetic identification, obtaining more-accurate taxonomic assignments and detecting a greater diversity using the latter. We also demonstrated that DNA sequencing accurately detects differences in biodiversity between samples. We concluded that high-throughput DNA sequencing applied to aerobiological samples obtained with Hirst spore traps provides reliable results and can be easily implemented for monitoring prokaryotic and eukaryotic entities present in the air of urban areas.IMPORTANCE Detection, monitoring, and characterization of the wide diversity of biological entities present in the air are difficult tasks that require time and expertise in different disciplines. We have evaluated the use of the Hirst spore trap (an instrument broadly employed in aerobiological studies) to detect and identify these organisms by DNA-based analyses. Our results showed a consistent collection of DNA and a good concordance with traditional methods for identification, suggesting that these devices can be used as a tool for continuous monitoring of the airborne biodiversity, improving taxonomic resolution and characterization together. They are also suitable for acquiring novel DNA amplicon-based information in order to gain a better understanding of the biological particles present in a scarcely known environment such as the air.

Monitoring of airborne biological particles in outdoor atmosphere. Part 2: Metagenomics applied to urban environments.

The air we breathe contains microscopic biological particles such as viruses, bacteria, fungi and pollen, some of them with relevant clinic importance. These organisms and/or their propagules have been traditionally studied by different disciplines and diverse methodologies like culture and microscopy. These techniques require time, expertise and also have some important biases. As a consequence, our knowledge on the total diversity and the relationships between the different biological entities present in the air is far from being complete. Currently, metagenomics and next-generation sequencing (NGS) may resolve this shortage of information and have been recently applied to metropolitan areas. Although the procedures and methods are not totally standardized yet, the first studies from urban air samples confirm the previous results obtained by culture and microscopy regarding abundance and variation of these biological particles. However, DNA-sequence analyses call into question some preceding ideas and also provide new interesting insights into diversity and their spatial distribution inside the cities. Here, we review the procedures, results and perspectives of the recent works that apply NGS to study the main biological particles present in the air of urban environments. [Int Microbiol 19(2):69-80(2016)].

Coupling of comprehensive two-dimensional gas chromatography with quadrupole mass spectrometry: Application to the identification of atmospheric volatile organic compounds

Observation data of atmospheric volatile organic compounds (VOCs) are highly needed in air quality assessment, photochemical mechanism study, and emission control policy-making, while it has been a challenge to accurately and comprehensively measure them. Comprehensive two-dimensional gas chromatography (GC×GC) is one of the advanced techniques in analysis of complex mixtures, providing a good choice for measurement of VOCs. However, the requirement for a fast detector limits the application of quadrupole mass spectrometry (qMS) in GC×GC analysis. This paper presents a method of a common qMS detector coupled with GC×GC to the identification of atmospheric VOCs. About 125 VOCs including alkanes, alkenes, aromatics, oxygenated hydrocarbons, and halocarbons were identified in the measurement of standard gas mixtures and/or urban air samples from Beijing. The results were applied to the analysis of GC×GC–FID by one to one correspondence of peaks of the equivalent compounds between the GC×GC–FID and GC×GC–qMS chromatograms, and the retention times of the identified components in GC×GC–FID in turn undertake the qualitative analysis without the further help of MS. The wrap-around phenomenon which may confuse the match of peaks was discussed in detail. The cooperation of GC×GC–FID and GC×GC–qMS which assists the identification makes the GC×GC exploration more affordable and yet practical on both qualitative and quantitative analysis. The method and the identified results can be expanded to analyze other volatiles.

Tracing fossil fuel CO2 using Δ14C in Xi'an City, China

Radiocarbon can be used to trace fossil fuel CO2 (CO2ff) in the atmosphere, because radiocarbon has been depleted in fossil fuels. Here we present our study on the spatial distribution and temporal variations of CO2ff in Xi'an City, China using Δ14C of both green foxtail (Setaria viridis, L. Beauv.) leaf samples and urban air samples collected in the recent years. Our results show that the CO2ff indicated by green foxtail ranged from 14.7 ± 1.7 to 52.6 ± 1.7 ppm, reflecting high CO2ff mole fractions in downtown, industrial areas, and at road sites, and low CO2ff mole fractions in public parks. Meanwhile, the monthly CO2ff reflected by air samples showed higher value in winter (57.8 ± 17.1 ppm) than that in summer (20.2 ± 9.8 ppm) due to the enhancement usage of coal burning and the poor dispersion condition of atmosphere. This study displays that the increased fossil fuel emission is associated with the fast development of Xi'an City in China. It is worth mentioning that the green foxtail samples can be used to map out the CO2ff spatial distribution on large scale quickly and conveniently, while the air samples can be used to trace the CO2ff temporal variations with high resolution effectively. Therefore the Δ14C of both green foxtail and air samples is a good indicator of CO2ff emission.

Thermal desorption-gas chromatography–mass spectrometry method to determine phthalate and organophosphate esters from air samples

A method based on thermal desorption-gas chromatography–mass spectrometry (TD-GC–MS) has been developed to determine four organophosphate esters, seven phthalate esters, and bis(2-ethylhexyl) adipate in the gas phase from harbour and urban air samples. The method involves the sampling of 1.5L of air in a Tenax TA sorbent tube followed by thermal desorption (using a Tenax TA cryogenic trap) coupled to gas chromatography–mass spectrometry. The repeatability of the method expressed as %RSD (n=3) is less than 15% and the MQLs are between 0.007μgm−3 (DMP, TBP, BBP, TPP and DnOP) and 6.7μgm−3 (DEHP). The method was successfully applied in two areas (urban and harbour) testing two and three points in each one, respectively. Some of these compounds were found in both urban and harbour samples. Di-(2-ethylhexyl)phthalate was the most abundant compound found in both areas at concentration levels between 6.7μgm−3 and 136.4μgm−3. This study demonstrates that thermal desorption is an efficient method for the determination of these semi-volatile compounds in the gas phase fraction of air samples

Development of a Simplified, Cost Effective GC-ECD Methodology for the Sensitive Detection of Bromoform in the Troposphere

Wherever measurements have been made bromoform was found to be ubiquitous in the surface ocean in pmolar-nmolar concentrations. These measurements show concentrations in coastal regions orders of magnitude higher than in the pelagic oceans. Its atmospheric presence is primarily due to its release from algae and rapid transport to the marine boundary troposphere where it is known to participate in ozone chemistry via photochemical and catalytic pathways. Until quite recently, a limited number of studies existed (compared to other marine volatile organic compounds (VOCs)), mainly due to the analytical challenge(s) presented by the low environmental mixing ratios. In this work we detail the development of a simplified, cost effective method to detect and quantify bromoform in environmental air samples. Air samples (1.5 L) were preconcentrated onto a precooled adsorbent (Carbopack X/Carboxen 1016) trap. These samples were injected by means of rapid thermal desorption for separation and detection by GC-ECD. The system was calibrated by means of a custom-built permeation oven. A linear system response was achieved, having a detection limit of 0.73 ± 0.09 ppt. A range of environmental samples was analysed to demonstrate the ability of the technique to separate and identify bromoform from air samples. The results showed that bromoform concentrations typically averaged 24.7 ± 17.3 ppt in marine air samples, 68.5 ± 26.3 ppt in Cape Town urban air samples and 33.9 ± 40.5 ppt in simulated biomass burning plumes (SBBP).

Levels and seasonal variations of organochlorine pesticides in urban and rural background air of southern Ghana

Urban, suburban and rural background air samples were collected in southern Ghana in 2008 employing polyurethane foam disc passive air samplers (PAS). PAS were analysed for organochlorine pesticides (OCPs), namely hexachlorocyclohexanes (α-, β-, γ- and δ-hexachlorocyclohexane), dichlorodiphenyltrichloroethane including metabolites (o,p'- and p,p'-DDT, DDE and DDD), hexachlorobenzene, pentachlorobenzene, aldrin, dieldrin, endrins (endrin, endrin aldehyde and endrin ketone), isodrin, heptachlors (heptachlor, heptachlor epoxide A and heptachlor epoxide B), chlordanes (α-, β-chlordane, oxychlordane and trans-nonachlor), endosulfans (α- and β-endosulfan and endosulfan sulphate), methoxychlor and mirex using a gas chromatograph coupled to a mass spectrometer. The levels of OCPs ranged for the individual pesticides from below limit of quantification to 750 pg m(-3) (for α-endosulfan), and current agricultural application seemed to be the main primary source of most abundant pesticides. Re-volatilization of previously used pesticides from contaminated soils could not be ruled out either as potential secondary source of contamination, especially in warm and dry seasons and periods of intensive agricultural activities. Higher atmospheric concentrations were observed in November and December during the dry season compared to lower concentrations observed in June, July and August when the country experiences heavy rains. The highest seasonal variation was observed for currently used pesticides as α-endosulfan. A p,p'-DDT/p,p'-DDE ratio suggested recent inputs of fresh technical DDT.

Bacterial communities in commercial aircraft high-efficiency particulate air (HEPA) filters assessed by PhyloChip analysis

Air travel can rapidly transport infectious diseases globally. To facilitate the design of biosensors for infectious organisms in commercial aircraft, we characterized bacterial diversity in aircraft air. Samples from 61 aircraft high‐efficiency particulate air (HEPA) filters were analyzed with a custom microarray of 16S rRNA gene sequences (PhyloChip), representing bacterial lineages. A total of 606 subfamilies from 41 phyla were detected. The most abundant bacterial subfamilies included bacteria associated with humans, especially skin, gastrointestinal and respiratory tracts, and with water and soil habitats. Operational taxonomic units that contain important human pathogens as well as their close, more benign relatives were detected. When compared to 43 samples of urban outdoor air, aircraft samples differed in composition, with higher relative abundance of Firmicutes and Gammaproteobacteria lineages in aircraft samples, and higher relative abundance of Actinobacteria and Betaproteobacteria lineages in outdoor air samples. In addition, aircraft and outdoor air samples differed in the incidence of taxa containing human pathogens. Overall, these results demonstrate that HEPA filter samples can be used to deeply characterize bacterial diversity in aircraft air and suggest that the presence of close relatives of certain pathogens must be taken into account in probe design for aircraft biosensors.Practical ImplicationsA biosensor that could be deployed in commercial aircraft would be required to function at an extremely low false alarm rate, making an understanding of microbial background important. This study reveals a diverse bacterial background present on aircraft, including bacteria closely related to pathogens of public health concern. Furthermore, this aircraft background is different from outdoor air, suggesting different probes may be needed to detect airborne contaminants to achieve minimal false alarm rates. This study also indicates that aircraft HEPA filters could be used with other molecular techniques to further characterize background bacteria and in investigations in the wake of a disease outbreak.