Upslope Migrating Sediment Waves Research Articles

Stratigraphic architecture of the Cenozoic Dugong Supersequence: implications for the late post-breakup development of the Eucla Basin, southern Australian continental margin

ABSTRACTThis study presents an appraisal of the Middle Eocene–Quaternary Dugong Supersequence of the Eucla Basin, offshore southern Australia. It combines details of the rock record with seismic-stratigraphical information, and the resulting stratigraphic framework provides constraints on the nature of the late post-breakup development of the southern Australian continental margin. It is well established that the onshore-to-mid-shelf succession comprises a predominantly aggrading-to-prograding unconformity-bounded succession of carbonate platform deposits; however, our analysis of the outer shelf–upper slope section challenges the widely held view that this shelf-margin wedge represents a distally steepened prograding carbonate ramp primarily modulated by global eustasy. Instead, our results show that the Middle Eocene–Quaternary succession is punctuated by a series of unconformities that reflect a persistent tectonic instability and differential vertical movements throughout the late post-breakup period, the genesis of which is most closely related to tectonic events. Moreover, the upper slope clinoform succession was constructed and shaped predominantly by alongslope processes, and four different contourite drift types are recognised based on their seismic-stratigraphic expression: elongate mounded drift (Quaternary); infill drift (Pliocene); plastered drift (Oligocene); and separated drift (Middle–Upper Eocene). The Quaternary drift – herein termed the ‘Eyre Terrace Drift’ – is a spectacular basin-scale deposit, over 500 m thick and traced for up to 200 km along the upper slope Eyre Terrace. Upslope-migrating sediment waves are associated with this drift. Key sedimentary attributes consistent with a contourite origin include fine-grained sediment, multi-scale gradational bed contacts and pervasive bioturbation. There is also evidence of episodic downslope mass-movement processes ranging from the large-scale Late Neogene Slide, which extends downslope for 15–20 km, to sporadic slumped beds and turbidites recovered in boreholes. The interaction of alongslope and downslope processes indicates a more dynamic sedimentary setting than previously assumed along the outer margin of the Eucla Basin.

Distribution, characteristics, and processes of formation of sediment waves along the Indian north-eastern continental margin

Muddy, upslope-migrating sediment waves, with their crestal lines parallel to the bathymetric contours, are the dominant geomorphic elements in the entire lower slope along the Indian north-eastern continental margin. Wave dimensions are maximum with high but differing degrees of sediment accretions on the upslope and downslope sides of wave crests and with most upslope wave migrations in the northeastern part of the study area, having relatively low seafloor gradients. The wave dimensions decrease with lower as well as differing degrees of sediment accretions on both sides of wave crests and with lower upslope wave migrations in the southwestern parts of the study area, having steeper seafloor gradients. Within each area of the lower slope, starting from updip, wave dimensions increase to their maximum at some distance downdip with optimal low seafloor gradients. Farther downdip, the wave dimensions decrease even with lower seafloor gradients continuing. Also, within each area, at the base of the wave intervals, the waves are small and grow into larger features with more sediment accretions in the upper intervals.The distribution and characteristics of sediment waves observed along the Indian margin are indicative of deposition by down-slope moving, unconfined turbidity currents that have evolved from other sediment gravity flows derived from several point sources updip. Along-slope bottom currents are least likely agents of wave deposition here. We interpret that the spatial and temporal variations in wave dimensions are due to the variations in seafloor gradients, turbidity current flow characteristics, frequency, duration and total number of flow events in space and time.

Seafloor morphology in the Mozambique Channel: evidence for long-term persistent bottom-current flow and deep-reaching eddy activity

The Mozambique Channel plays a key role in the exchange of surface water masses between the Indian and Atlantic Oceans and forms a topographic barrier for meridional deep and bottom water circulation due to its northward shoaling water depths. New high-resolution bathymetry and sub-bottom profiler data show that due to these topographic constraints a peculiar seafloor morphology has evolved, which exhibits a large variety of current-controlled bedforms. The most spectacular bedforms are giant erosional scours in the southwest, where northward spreading Antarctic Bottom Water is topographically blocked to the north and deflected to the east forming furrows, channels and steep sediment waves along its flow path. Farther north, in the water depth range of North Atlantic Deep Water, the seafloor is strongly shaped by deep-reaching eddies. Steep, upslope migrating sediment waves in the west have formed beneath the southward flow of anticyclonic Mozambique Channel eddies (MCEs). Arcuate bedforms in the middle evolved through an interaction of the northward flow of MCEs with crevasse splays from a breach in the western Zambezi Channel levee. Hummocky bedforms in the east result from an interplay of East Madagascar Current eddies with overspill deposits of the crevasse and Zambezi Channel. All bedforms are draped with sediments indicating that the present-day current velocities are not strong enough to erode sediments. Hence, it can be concluded that the seafloor morphology developed during earlier times, when bottom-current velocities were stronger. Assuming a sedimentation rate of 20 m/Ma and a drape of at least 50 m thickness the bedforms may have developed during the Pliocene Epoch or earlier.

The role of Internal Solitary Waves on deep-water sedimentary processes: the case of up-slope migrating sediment waves off the Messina Strait.

Subaqueous, asymmetric sand waves are typically observed in marine channel/canyon systems, tidal environments, and continental slopes exposed to strong currents, where they are formed by current shear resulting from a dominant unidirectional flow. However, sand-wave fields may be readily observed in marine environments where no such current exists; the physical processes driving their formation are enigmatic or not well understood. We propose that internal solitary waves (ISWs) induced by tides can produce an effective, unidirectional boundary “current” that forms asymmetric sand waves. We test this idea by examining a sand-wave field off the Messina Strait, where we hypothesize that ISWs formed at the interface between intermediate and surface waters are refracted by topography. Hence, we argue that the deflected pattern (i.e., the depth-dependent orientation) of the sand-wave field is due to refraction of such ISWs. Combining field observations and numerical modelling, we show that ISWs can account for three key features: ISWs produce fluid velocities capable of mobilizing bottom sediments; the predicted refraction pattern resulting from the interaction of ISWs with bottom topography matches the observed deflection of the sand waves; and predicted migration rates of sand waves match empirical estimates. This work shows how ISWs may contribute to sculpting the structure of continental margins and it represents a promising link between the geological and oceanographic communities.

Records of continental slope sediment flow morphodynamic responses to gradient and active faulting from integrated AUV and ROV data, offshore Palos Verdes, southern California Borderland

Variations in seabed gradient are widely acknowledged to influence deep-water deposition, but are often difficult to measure in sufficient detail from both modern and ancient examples. On the continental slope offshore Los Angeles, California, autonomous underwater vehicle, remotely operated vehicle, and shipboard methods were used to collect a dense grid of high-resolution multibeam bathymetry, chirp sub-bottom profiles, and targeted sediment core samples that demonstrate the influence of seafloor gradient on sediment accumulation, depositional environment, grain size of deposits, and seafloor morphology. In this setting, restraining and releasing bends along the active right-lateral Palos Verdes Fault create and maintain variations in seafloor gradient. Holocene down-slope flows appear to have been generated by slope failure, primarily on the uppermost slope (~100–200m water depth). Turbidity currents created a low relief (<10m) channel, up-slope migrating sediment waves (λ=~100m, h≤2m), and a series of depocenters that have accumulated up to 4m of Holocene sediment. Sediment waves increase in wavelength and decrease in wave height with decreasing gradient. Integrated analysis of high-resolution datasets provides quantification of morphodynamic sensitivity to seafloor gradients acting throughout deep-water depositional systems. These results help to bridge gaps in scale between existing deep-sea and experimental datasets and may provide constraints for future numerical modeling studies.

U-shaped slope gully systems and sediment waves on the passive margin of Gabon (West Africa)

3-D seismic reflection data has enabled the documentation of a system of remarkable modern and buried u-shaped gullies which intimately co-exist with upslope migrating sediment waves along 80 km of the Gabon continental slope. The modern gullies occur on a silty mud-dominated slope in water depths of 150–1500 m on an ~ 50 km wide slope with a gradient of 4.5° decreasing to 1.5°. The gully sets persist laterally for distances of at least 40 km and extend downslope for distances of up to 60 km. The gullies are u-shaped in cross-section, with a relief of 5–30 m, and widths of 50–400 m. Intriguingly, the gullies become narrower and shallower with distance down the slope, as well as increasing in number down slope. The majority of the gullies appear to be erosional but some appear to have resulted from simultaneous aggradation along inter-gully ridges and non-deposition along the adjacent gully floor. Hence, these gullies are interpreted to have formed mainly in response to spatially-variable deposition, rather than erosion. Upslope migrating sediment waves occur in close proximity to the gullies. Gullies cross fields of sediment waves and waves are observed to migrate up-slope locally within both the erosional and aggradational gullies. Evidence is lacking for any slumping or headward erosion in the headwall region of the gullies, which discounts formation by very local sediment gravity flows originating from shelf-edge collapse, as has been observed in other v-shaped gully systems. Based on our new data, and supported by theoretical studies on the mechanics of turbidity currents, we propose that the gullies and related sediment waves were formed by diffuse, sheet-like, mud-rich turbidity currents that presumably originated on the shelf. Instabilities in the turbidity currents generated a wave-shaped perturbation in a cross-flow direction leading to regularly spaced regions of faster and slower flow. For the non-aggradational and erosional gullies it is inferred that gully axes experienced flow velocities that mainly exceeded the settling velocity of the sediment in suspension, and thus no deposition occurred. In contrast, the aggradational gullies indicate lower flow velocities with sediment deposition both within the gully axes and on the gully flanks. Mixed mode gullies are also found which indicate that successive flows can experience variations in flow properties leading to interspersed erosional and depositional events. ► U-shaped slope gullies associated with sediment waves are discovered offshore Gabon. ► The gullies display both aggradational and erosional morphologies. ► Gullies occur at the modern seabed and buried in Pleistocene–Holocene sediments. ► Sheet-like, fine-grained turbidity currents can form both gullies and sediment waves. ► Perturbation in cross-flow direction of wide turbidity currents may form gullies.

Sediment waves on the South China Sea Slope off southwestern Taiwan: Implications for the intrusion of the Northern Pacific Deep Water into the South China Sea

Using an integrated multi-beam bathymetry, high-resolution seismic profile, piston core, and AMS 14C dating data set, the current study identified two sediment wave fields, fields 1 and 2, on the South China Sea Slope off southwestern Taiwan. Field 1 is located in the lower slope, and sediment waves within it are overall oriented perpendicular to the direction of down-slope gravity flows and canyon axis. Geometries, morphology, and internal seismic reflection configurations suggest that the sediment waves in field 1 underwent significant up-slope migration. Field 2, in contrast, is located more basinward, on the continental rise. Instead of having asymmetrical morphology and discontinuous reflections as observed in field 1, the sediment waves in field 2 show more symmetrical morphology and continuous reflections that can be traced from one wave to another, suggesting that vertical aggradation is more active and predominant than up-slope migration.Three sediment wave evolution stages, stage 1 through stage 3, are identified in both field 1 and field 2. During stage 1, the sediment waves are built upon a regional unconformity that separates the underlying mass-transport complexes from the overlying sediment waves. In both of these two fields, there is progressive development of the sediment waves and increase in wave dimensions from the oldest stage 1 to the youngest stage 3, even though up-slope migration is dominant in field 1 whereas vertical aggradation is predominant in field 2 throughout these three stages.The integrated data and the depositional model show that the upper slope of the study area is strongly dissected and eroded by down-slope gravity flows. The net result of strong erosion is that significant amounts of sediment are transported further basinward into the lower slope by gravity flows and/or turbidity currents. The interactions of these currents with bottom (contour) currents induced by the intrusion of the Northern Pacific Deep Water into the South China Sea and preexisting wavy topography in the lower slope result in the up-slope migrating sediment waves in field 1 and the contourites as observed from cores TS01 and TS02. Further basinward on the continental rise, turbidity currents are waned and diluted, whereas along-slope bottom (contour) currents are vigorous and most likely dominate over the diluted turbidity currents, resulting in the vertically aggraded sediment waves in field 2.The results from this study also provide the further evidence for the intrusion of the Northern Pacific Deep Water into the South China Sea and suggest that this intrusion has probably existed and been capable of affecting sedimentation in South China Sea at least since Quaternary.

A comparative study of sediment waves and cyclic steps based on geometries, internal structures and numerical modeling

Although sediment waves cover many levees and canyon floors of submarine fan systems, their relation to the turbidity currents that formed them is still poorly understood. Over the recent years some large erosional sediment waves have been interpreted as cyclic steps. Cyclic steps are a series of slowly upslope migrating bedforms (steps), where each downward step (the lee side of the bedform) is manifested by a steeply dropping flow passing through a hydraulic jump before re-accelerating on the flat stoss side. Here, a general comparison is made between sediment waves and cyclic steps. First, the analogies between their geometries and internal structures are explored. Secondly, a basic numerical model is used to construct stability fields for the formation of cyclic steps. These stability fields are compared with large, existing datasets of both fine- and coarse-grained sediment waves. The numerical results enable an explanation of geometrical trends found over series of sediment waves in the upper part of the Monterey Canyon, on the middle Amazon Fan and on a leveed channel in the Makassar Strait in terms of changes in flow properties of the overriding turbidity current. Based on sedimentological arguments and numerical analysis it is concluded that cyclic steps form a potential alternative for the existing interpretations on the origin of upslope migrating sediment waves.

Late Quaternary sedimentary processes and variations in bottom-current activity in the Ulleung Interplain Gap, East Sea (Korea)

A detailed facies analysis of core sediments from the Ulleung Interplain Gap (UIG) reveals ten sedimentary facies which reflect a variety of sedimentary processes: volcaniclastic high-concentration sediment gravity flows, low-density turbidity currents, pelagic settling under either well or poorly oxygenated bottom-water conditions, marine fallout of tephra, hampered sedimentation by bottom currents, top-truncation of turbidites by bottom-current reworking, and Mn-carbonate precipitation under changing bottom-water oxygenation states. Distribution of the facies in the cores, integrated with echo characters of high-resolution subbottom profiles, delineates spatial and temporal changes in sedimentary processes, influenced by variations in bottom-current activity during the late Quaternary. The glacial (> ∼15 ka) sediment units from the Ulleung Interplain Channel (UIC), an erosional axial channel system in the UIG, consist mainly of manganiferous and muddy contourites, interbedded with coarse-grained volcaniclastic turbidites or debrites and non-bioturbated pelagites. This indicates prevalent activity of bottom currents, rarely interrupted by volcaniclastic high-concentration sediment gravity flows and deep-water stagnations which resulted in anoxic bottom-water conditions. On the other hand, the glacial units of the southeastern margin of the UIC, where upslope migrating sediment waves developed, are generally dominated by alternating fine-grained turbidites and bioturbated or non-bioturbated pelagites. This suggests that frequent turbidity currents derived from upslope mass wasting were responsible for the generation of the sediment waves. The post-glacial (< ∼15 ka) units from both the UIC and its southeastern margin consist mostly of muddy contourites or bioturbated pelagites with basal manganiferous contourites. They correspond to an acoustically transparent layer which occurs as an elongate mound parallel to the UIC in the southeastern margin. These features are suggestive of bottom-current-controlled sedimentation, hampered sedimentation in the UIC axis by stronger bottom-current activity and focused accumulation of resuspended sediments in the southeastern margin. The post-glacial bottom-current activity was initiated by renewed circulation with open ocean at ∼ 15 ka, probably more vigorous than that of the present. The bottom-current activity seems to have been augmented by enhanced bottom-water formation by colder sea-surface temperature.

3D Anatomy of Late Neogene Contourite Drifts and Associated Mass Flows in the Faroe-Shetland Basin

AbstractWe have combined 3D mapping of key reflectors with seismic profiles to describe the geometry and anatomy of contourite drifts formed by deep waters passing through the oceanic gateway of the Faroe-Shetland Channel. The West Shetland Drift complex is characterized by sheeted-mounded drift units, and upslope migrating sediment waves accreting over an early Pliocene unconformity. The basin section is constructed by a series of asymmetric depositional units of early Pliocene-Pleistocene age, interlayered by three mega-debrite sequences that extend into the basin. The Pliocene drift surface display an enhanced topography of bifurcating moat-channels that tend to branch out in a southwest direction. Along the lower slope a succession of upslope migrating sediment waves has accumulated from the Pliocene drift topography. These features extend to the present sea bed at water depths of 700-1000 m where they appear as a series of linear, bifurcating ridges. The high accumulation rates of the West Shetland Drift since the early Pliocene transition and the formation of upslope migrating sediment waves is related to a sustained flow of Norwegian Sea deep waters and cross-slope transport of fine-grained sediments from the NW European shelf.

Seismic evidence of current-controlled sedimentation in the Belgica mound province, upper Porcupine slope, southwest of Ireland

The Porcupine Seabight is an embayment that takes a particular position in the NE Atlantic slope. Sonographs, a few current measurements and hydrodynamic modelling suggest the presence of a strong northward-flowing bottom current, locally enhanced by internal tides, affecting the eastern slope of the Seabight. At this location a province of coral banks is described, expressed as mounds lined up in along-slope-trending ridges. In this paper, very high-resolution single-channel seismic profiles are used to evaluate to what extent the bottom currents influenced the deposition of the sediments surrounding the mounds throughout the Late Cenozoic. Three seismostratigraphic units (P1, P2 and P3) can be identified in the Belgica mound area, separated by two margin-wide discontinuities (RD2 and RD1). Within Unit P1 (probably Early to Middle Miocene) upslope-migrating sediment waves are observed, suggesting strong bottom currents were already active in the Miocene. After an early Middle Miocene erosion event, represented by reflector RD2, an acoustically transparent layer (Unit P2) of as yet unknown lithology was deposited in the studied area. A second margin-wide erosional event, marked by the Late Pliocene RD1 reflector, removed a large part of Unit P2 and has cut deeply into Unit P1. Subsequently, the Belgica mounds were constructed spectacularly fast on topographic irregularities on the RD1 paleobathymetry. The onlap within the Quaternary Unit P3, which surrounds these mounds, suggests that the mounds were already present before the deposition of P3 and were big enough to affect the intensity of the currents around them. Furthermore, the channels and the mounds are, together with the complex oceanographic regime, the key morphological elements responsible for the shaping of a contourite system in the Belgica mound area during the Quaternary. One drift body is formed by an inferred south–north-directed current, with a drift levee and associated channel located on its western side. Between this channel and the mounds, large-scale sediment waves suggest an intensified bottom current running along the foot of the steep flanks of the mounds. The Belgica mounds are embedded in another drift body. Here, an interaction of bottom and turbidity currents is suggested, creating short turbidite channels at the southern and northern flanks of the mounds. Locally, small confined drifts can be observed where Unit P3 is deposited in a narrow passage made by the paleobathymetry of RD1 and the mounds.

Wave-form sheeted contourite drift on the Barra Fan, NW UK continental margin

Abstract The lithology of a 30 m long piston core (MD95-2006) and high-resolution, seismic profiles from the lower Barra Fan, Rockall Trough, reveal a sheeted drift form with internal sediment waves deposited over the last glacial-interglacial cycle. Deposition of these mainly fine-grained deposits was controlled by a combination of downslope and alongslope transport mechanisms that interacted with the positive topography created by debrite lobes on the lower fan. The core penetrates a small field of sediment waves (wavelength approx. 1 km, height 3-6 m), which onlap a debrite lobe dated to the last glacial maximum. The sedimentary sequence shows: (1) silty-muddy contourites deposited during the mid-Devensian (Marine Isotope Stage 3), (2) glacimarine hemipelagites and sandy turbidites deposited between 26 and 18 C14 ka BP, followed by a short phase of erosion and redeposition by bottom currents, and (3) glacimarine hemipelagites and silty-muddy contourites representing the glacial to Holocene transition. On the distal fan edge, a drift sequence with upslope-migrating sediment waves (wavelengths approx. 3 km, height 15-30 m) onlaps the tongue of a previous slide event (pre-Devensian?). These bedforms were probably generated by decelerating, low-density glacigenic turbidity currents, but pirated by contour-following bottom currents on the distal part of the drift.

Oligocene to Holocene sediment drifts and bottom currents on the slope of Gabon continental margin (west Africa)

Seismic reflection profiles on the slope of the south Gabon continental margin display furrows 2 km wide and some 200 m deep, that develop normal to the margin in 500‐1500 m water depth. Furrows are characterised by an aggradation=progradation pattern which leads to margin-parallel, northwestward migration of their axes through time. These structures, previously interpreted as turbidity current channels, display the distinctive seismic image and internal organisation of sediment drifts, constructed by the activity of bottom currents. Sediment drifts were initiated above a major Oligocene unconformity, and they developed within a Oligocene to Present megasequence of general progradation of the margin, whilst they are markedly absent from the underlying Late Cretaceous‐Eocene aggradation megasequence. The presence of upslope migrating sediment waves, and the northwest migration of the sediment drifts indicate deposition by bottom current flowing upslope, under the influence of the Coriolis force. Such landwards-directed bottom currents on the slope probably represent coastal upwelling, which has been active along the west Africa margin throughout the Neogene. © 1999 Elsevier Science B.V. All rights reserved.