Unsaturated Sites Research Articles

Crystalline/Amorphous Interface Engineering and d-sp Orbital Hybridization Synergistically Boosting the Electrocatalytic Performance of PdCu Bimetallene toward Formic Acid-Assisted Overall Water Splitting.

Advanced electrocatalysts capable of bifunctional catalysis for formic acid oxidation (FAOR) and hydrogen evolution reaction (HER) have garnered significant attention due to their exceptional energy efficiency. In this research, we have meticulously designed a PdCu bimetallene characterized by numerous crystalline/amorphous (c/a) interfaces and robust d-sp orbital hybridization, achieved by integrating the p-block metalloid boron within the PdCu matrix (B-PdCu-c/a). The B-PdCu-c/a bimetallene revealed a multitude of surface atoms and unsaturated defect sites, offering abundant catalytic active sites and an optimized electronic structure. The B2-PdCu-c/a exhibited the best performance in FAOR and HER, achieving a mass activity of 1106 mA mgcat-1 and an overpotential of 52 mV, respectively. Significantly, the two-electrode configuration of B2-PdCu-c/a∥B2-PdCu-c/a attained a low cell voltage of 0.19 V at 10 mA cm-2 during formic acid-assisted overall water splitting. Density functional theory (DFT) calculations indicated that c/a interface engineering and d-sp orbital hybridization synergistically optimized the electronic configuration of pristine PdCu bimetallene. This led to an elevation of the d-band center and an accumulation of charge at the c/a interface, which enhanced the adsorption of intermediates, facilitated C-H bond cleavage, and balanced the adsorption-desorption of hydrogen, thereby improving electrocatalytic activities for FAOR and HER, respectively. This study not only presents a viable strategy for effectively tuning the electronic configuration of bimetallene but also offers valuable insights into the development of electrocatalysts.

Surface Coating of ZIF-8 Nanoparticles with Polyacrylic Acid: A Facile Approach to Enhance Chemical Stability for Biomedical Applications.

Nanoparticles of zeolitic imidazole framework-8 (ZIF-8 NPs), which are the subclass of metal-organic frameworks consisting of Zn ion and 2-methylimidazole, have been identified as promising drug carriers since their large microporous structure is suited for encapsulating hydrophobic drug molecules. However, one of the limitations of ZIF-8 NPs is their low stability in physiological solutions, especially in the presence of water and phosphate anions. These molecules can interact with the coordinatively unsaturated Zn sites at the external surface to induce the degradation of ZIF-8 NPs. In this study, herein a facile approach is reported to enhance the chemical stability of ZIF-8 NPs by surface coating with polyacrylic acid (PAA). The PAA-coated ZIF-8 (PAA-ZIF-8) NPs are prepared by mixing ZIF-8 NPs and PAA in water. PAA coating inhibits the degradation of ZIF-8 NPs in water as well as phosphate-buffered saline over 6 days, which seems to be due to the coordination of carboxyl groups of PAA to the reactive Zn sites. Furthermore, the PAA-ZIF-8 NPs loaded with the anticancer drug doxorubicin (Dox) show cytotoxicity in human colon cancer cells. These results clearly show the feasibility of the PAA coating approach to improve the chemical stability of ZIF-8 NPs without impairing their drug delivery capability.

Tailoring Ce-Centered Metal-Organic Frameworks for Fast Li+ Transport in Composite Polymer Electrolyte.

Regulating metal nodes to innovate the metal-organic framework (MOF) structure is of great interest to boost the performance of MOFs-incorporated composite solid electrolytes. Herein, Ce4+ with a low-lying 4f orbital is selected as metal center to coordinate with organic ligand to prepare MOF of Ce-UiO-66. The unsaturated open metal sites and defected oxygen vacancies furnish Ce-UiO-66 with strengthened Lewis acidity, which promotes Ce-UiO-66 interacting effectively with both poly(ethylene oxide) (PEO) and Li salt anions. Accordingly, Ce-UiO-66 as additive fillers can be uniformly dispersed in PEO matrix to form an advanced composite solid-state electrolyte (Ce-UiO@PEO) with accelerated Li+ transport. The optimized Ce-UiO@PEO displays a boosted ionic conductivity of 4.20 × 10-4 S cm-1 and an improved Li+ transference number of 0.39 at 60 °C, which are highly comparable to those of other MOFs@PEO electrolytes. Combined with the mechanical and thermal stabilities, such a Ce-UiO@PEO electrolyte enables Li/Li symmetric and Li/LiFePO4 full cells with superior cycling stability and rate performance. The Ce-UiO@PEO electrolytes are of great potential to be applied in high-performance lithium metal batteries.

Optimizing solvothermal synthesis of aluminum-loaded pomelo peel for enhanced fluoride adsorption using response surface methodology

Addressing fluoride contamination in water remains a critical challenge, particularly when seeking cost-effective solutions. In this study, we present a novel aluminum-loaded pomelo peel adsorbent (PPA-Al), synthesized via a one-step solvothermal method, with parameters optimized through response surface methodology. The ideal conditions were established at 2.96 g of pomelo peel, 2 g of NaAlO₂, a reaction temperature of 168.62 °C, and a duration of 140.78 minutes. Characterization of PPA-Al revealed an abundance of hydroxyl and carbon functional groups, enhancing its reactivity with coordination unsaturated aluminum sites. Adsorption isotherms conformed to both Langmuir and Freundlich models, achieving a maximum adsorption capacity of 88.81 mg·g⁻¹, outperforming many existing biomass-based adsorbents. Kinetic analysis indicated that fluoride adsorption followed a pseudo-second-order model, with thermodynamic evaluations suggesting that this process is a spontaneous endothermic reaction. Characterization techniques, including Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS), confirmed interactions between fluoride ions and -OH and -CH groups, as well as the formation of Al-F bonds. Notably, the use of PPA-Al reduces groundwater treatment costs by approximately 74.33∼83.24 % compared to activated alumina, and it can be reused multiple times without reagent regeneration. These findings highlight PPA-Al as a promising, efficient material for fluoride removal, while also demonstrating innovative applications for agricultural waste.

High-Density Atomic Level Defect Engineering of 2D Fe-Based Metal-Organic Frameworks Boosts Oxygen and Hydrogen Evolution Reactions.

Electrocatalysts based on metal-organic frameworks (MOFs) attracted significant attention for water splitting, while the transition between MOFs and metal oxyhydroxide poses a great challenge in identifying authentic active sites and long-term stability. Herein, we employ on-purpose defect engineering to create high-density atomic level defects on two-dimensional Fe-MOFs. The coordination number of Fe changes from 6 to 4.46, and over 28% of unsaturated Fe sites are formed in the optimized Fe-MOF. In situ characterizations of the most optimized Fe-MOF0.3 electrocatalyst during the oxygen evolution reaction (OER) process using Fourier transform infrared and Raman spectroscopy have revealed that some Fe unsaturated sites become oxidized with a concomitant dissociation of water molecules, causing generation of the crucial *OH intermediates and Fe oxyhydroxide. Moreover, the presence of Fe oxyhydroxide is compatible with the Volmer and Heyrovsky steps during the hydrogen evolution reaction (HER) process, which lower its energy barrier and accelerate the kinetics. As a result, the optimized Fe-MOF electrodes delivered remarkable OER (259 mV at 10 mA cm-2) and HER (36 mV at 10 mA cm-2) performance. Our study offers comprehensive understanding of the effect of phase transformation on the electrocatalytic process of MOF-based materials.

Highly Stable Propane Dehydrogenation on a Self‐Supporting Single‐Component Zn2SiO4 Catalyst

AbstractCurrent industrial propane dehydrogenation (PDH) processes predominantly use either toxic Cr‐based or expensive Pt‐based catalysts, necessitating urgent exploration for alternatives. Herein, we present Zn2SiO4, an easily prepared, cost‐effective material, as a highly efficient and stable catalyst for PDH. Uniquely, Zn2SiO4 nanocrystals do not require dispersion on support materials, commonly needed for catalytic active oxide clusters, but function as a self‐supporting catalyst instead. During the reaction‘s induction period, surface Zn species on the Zn2SiO4 crystal reduce to coordinately unsaturated ZnOx single sites, serving as highly active catalytic centers. The Zn2SiO4 catalyst demonstrates a stable performance over 200 hours of PDH operation at 550 °C. We further find that introducing a minuscule amount of CO2 into the propane feed significantly extends the catalyst lifespan to over 2000 hours. This enhancement arises from the special role of CO2 in facilitating the removal of strongly adsorbed H*, preventing the complete reduction of ZnOx. After prolonged reaction, the activity of Zn2SiO4 can be fully restored by etching the surface layer to expose fresh Zn species, available throughout the crystals. The combination of CO2introduction and catalytic site regeneration strategies is expected to enable a year‐long PDH operation using a single batch of Zn2SiO4 catalyst.

Highly Stable Propane Dehydrogenation on a Self-Supporting Single-Component Zn2SiO4 Catalyst.

Current industrial propane dehydrogenation (PDH) processes predominantly use either toxic Cr-based or expensive Pt-based catalysts, necessitating urgent exploration for alternatives. Herein, we present Zn2SiO4, an easily prepared, cost-effective material, as a highly efficient and stable catalyst for PDH. Uniquely, Zn2SiO4 nanocrystals do not require dispersion on support materials, commonly needed for catalytic active oxide clusters, but function as a self-supporting catalyst instead. During the reaction's induction period, surface Zn species on the Zn2SiO4 crystal reduce to coordinately unsaturated ZnOx single sites, serving as highly active catalytic centers. The Zn2SiO4 catalyst demonstrates a stable performance over 200 hours of PDH operation at 550 °C. We further find that introducing a minuscule amount of CO2 into the propane feed significantly extends the catalyst lifespan to over 2000 hours. This enhancement arises from the special role of CO2 in facilitating the removal of strongly adsorbed H*, preventing the complete reduction of ZnOx. After prolonged reaction, the activity of Zn2SiO4 can be fully restored by etching the surface layer to expose fresh Zn species, available throughout the crystals. The combination of CO2introduction and catalytic site regeneration strategies is expected to enable a year-long PDH operation using a single batch of Zn2SiO4 catalyst.

Photocatalytic H2O2 production over boron-doped g-C3N4 containing coordinatively unsaturated FeOOH sites and CoOx clusters

Graphitic carbon nitride (g-C3N4) has gained increasing attention in artificial photosynthesis of H2O2, yet its performance is hindered by sluggish oxygen reduction reaction (ORR) kinetics and short excited-state electron lifetimes. Here we show a B-doped g-C3N4 (BCN) tailored with coordinatively unsaturated FeOOH and CoOx clusters for H2O2 photosynthesis from water and oxygen without sacrificial agents. The optimal material delivers a 30-fold activity enhancement compared with g-C3N4 under visible light, with a solar-to-chemical conversion efficiency of 0.75%, ranking among the forefront of reported g-C3N4-based photocatalysts. Additionally, an electron transfer efficiency reaches 34.1% for the oxygen reduction reaction as revealed by in situ microsecond transient absorption spectroscopy. Experimental and theoretical results reveal that CoOx initiates hole–water oxidation and prolongs the electron lifetime, whereas FeOOH accepts electrons and promotes oxygen activation. Intriguingly, the key to the direct one-step two-electron reaction pathway for H2O2 production lies in coordinatively unsaturated FeOOH to adjust the Pauling-type adsorption configuration of O2 to stabilize peroxide species and restrain the formation of superoxide radicals.

Hierarchical Bifunctional NiO Electrocatalyst: Highly Porous Structure Boosting the Water Splitting Activity.

The development of an efficient, low-cost and earth-abundant electrocatalyst for water splitting is crucial for the production of sustainable hydrogen energy. However their practical applications are largely restricted by their limited synthesis methods, large overpotential and low surface area. Hierarchical materials with a highly porous three-dimensional nanostructure have garnered significant attention due to their exceptional electrocatalytic properties. These hierarchical porous frameworks enable the fast electron transfer, rapid mass transport, and high density of unsaturated metal sites and maximize product selectivity. Here the process involved obtaining monodispersed microrod-shaped Ni(OH)2 through a hydrothermal reaction, followed by a heat treatment to convert it into hierarchical microrod-shaped NiO materials. N2 sorption analysis revealed that the BET surface area increased from 9 to 89 m2/g as a result of the heat treatment. The hierarchical microrod-shaped NiO materials demonstrated outstanding bifunctional electrocatalytic water splitting capabilities, excelling in both HER and OER in basic solution. Overpotential of 347 mV is achieved at 10 mA/cm2 for OER activity, with a Tafel slope of 77 mV/dec. Similarly, overpotential of 488 mV is achieved at 10 mA/cm2 for HER activity, with a Tafel slope of 62 mV/dec.

Electronic effect in bromide-modified noble metal catalysts promotes highly stable and selective hydrogenation

Halides with strong affiliation to metals are traditionally viewed as positions in heterogeneous catalysis. This study introduces a method to enhance the selective hydrogenation performance of noble metal nanoparticle catalysts (Pd, Pt, and Rh hosted on N-doped carbon, SiO2, and Al2O3) by gas-phase bromination with 1-bromooctane. Brominated Pd catalysts, particularly those supported on N-doped carbon, show significant improvements in total butene selectivity and stability in butadiene hydrogenation reactions, displaying >97.5 % selectivity to total butenes at complete conversion with 50 h stable performance even at excessive H2 (H2:butadiene = 50) and a high temperature of 473 K. Comprehensive characterizations coupled with density functional theory calculations reveal that bromide species enhance selective hydrogenation by preferentially adsorbing at stepped Pd sites, altering reaction kinetics and preventing over-hydrogenation. Bromination influences reactant and intermediate adsorption, leading to increased competitive adsorption compared to pristine catalysts. Chemisorption studies on butadiene and 1-butene support altered kinetic behaviors post-bromination. X-ray photoelectron spectroscopy analysis demonstrate an increase in surface Pdδ+ species, owing to the electron-pulling character of nearby adsorbed bromide. In situ diffuse reflection infrared Fourier transform spectroscopy with CO probe molecules confirms Br species adsorption at unsaturated Pd sites. Overall, the study provides an effective approach to tuning the electronic properties of metal catalysts and highlights the positive impact of bromination on improving the hydrogenation performance.

Interface Synergy of Exposed Oxygen Vacancy and Pd Lewis Acid Sites Enabling Superior Cooperative Photoredox Synthesis.

Photo-driven cross-coupling of o-arylenediamines and alcohols has emerged as an alternative for the synthesis of bio-active benzimidazoles. However, tackling the key problem related to efficient adsorption and activation of both coupling partners over photocatalysts towards activity enhancement remains a challenge. Here, we demonstrate an efficient interface synergy strategy by coupling exposed oxygen vacancies (VO) and Pd Lewis acid sites for benzimidazole and hydrogen (H2) coproduction over Pd-loaded TiO2 nanospheres with the highest photoredox activity compared to previous works so far. The results show that the introduction of VO optimizes the energy band structure and supplies coordinatively unsaturated sites for adsorbing and activating ethanol molecules, affording acetaldehyde active intermediates. Pd acts as a Lewis acid site, enhancing the adsorption of alkaline amine molecules via Lewis acid-base pair interactions and driving the condensation process. Furthermore, VO and Pd synergistically promote interfacial charge transfer and separation. This work offers new insightful guidance for the rational design of semiconductor-based photocatalysts with interface synergy at the molecular level towards the high-performance coproduction of renewable fuels and value-added feedstocks.

DBD plasma assisted synthesis of Ce-MIL-88B(Fe) with electron-rich CUSs and mixed-valent bimetallic sites for enhanced photo-Fenton performance

Iron-based metal-organic frameworks (Fe-MOFs) are regarded as a kind of prospective catalysts for photo-Fenton process. However, high cost, rate-limiting Fe(III)/Fe(II) circulation and limited metal sites greatly restricted the application of Fe-MOFs in photo-Fenton system. Ce-MIL-88B(Fe) was synthesized with mixed-valent bimetallic sites and tunable coordinated unsaturated metal sites (CUSs) using dielectric barrier discharge (DBD) plasma with waste PET. The incorporation of Ce altered the structure and the electron aggregation, as well as induced structural defects. Ce substitution in Fe-MOFs induced the regulation of the ratio of Fe ions and formation of electron-rich CUSs, which were beneficial for the rapid adsorption and activation of H2O2, thus enhancing the photo-Fenton performance. The effect of reaction conditions on TC degradation was investigated by response surface methodology (RSM) combined with Box-Behnken design (BBD). This study demonstrates a new perspective on the construction of bimetallic MOFs for the photo-Fenton system.

Reusable fluorescence nanoprobe based on DNA-functionalized metal-organic framework for ratiometric detection of mercury (II) ions.

Areusable fluorescent nanoprobewas developedusing DNA-functionalized metal-organic framework (MOF) for ratiometric detection of Hg2+. We utilized a zirconium-based MOF (UiO-66) to encapsulate tris(bipyridine) ruthenium(II) chloride (Ru(bpy)32+), resulting in Ru(bpy)32+@UiO-66 (RU) with red fluorescence. The unsaturated metal sites in UiO-66 facilitate the attachment of thymine-rich single-strand DNA (T-ssDNA) through Zr-O-P bond, producing T-ssDNA-functionalized RU complex (RUT). The T-ssDNA selectively binds to Hg2+, forming stable T-Hg2+-T base pairs and folding into double-stranded DNA, which permits the intercalation of SYBR Green I (SGI) and activates its green fluorescence. In the presence of Hg2+, SGI fluorescence increases in a dose-dependent manner, while Ru(bpy)32+ fluorescence remains constant. This fluorescence contrast enables RUT to serve as an effective ratiometric nanoprobe for Hg2+ detection, with a detection limit of 3.37 nM. Additionally, RUT demonstrates exceptional reusability due to the ability of cysteine to remove Hg2+, given its stronger affinity for thiol groups. The RUT was successfully applied to detect Hg2+ in real water samples. This work advances the development of ratiometric fluorescence nanoprobe based on DNA-functionalized MOFs.

S-Modified Graphitic Carbon Nitride with Double Defect Sites For Efficient Photocatalytic Hydrogen Evolution.

Graphitic carbon nitride (gC3N4) is an attractive photocatalyst for solar energy conversion due to its unique electronic structure and chemical stability. However, gC3N4 generally suffers from insufficient light absorption and rapid compounding of photogenerated charges. The introduction of defects and atomic doping can optimize the electronic structure of gC3N4 and improve the light absorption and carrier separation efficiency. Herein, the high efficiency of carbon nitride photocatalysis for hydrogen evolution in visible light is achieved by an S-modified double-deficient site strategy. Defect engineering forms abundant unsaturated sites and cyano (─C≡N), which promotes strong interlayer C─N bonding interactions and accelerates charge transport in gC3N4. S doping tunes the electronic structure of the semiconductors, and the formation of C─S─C bonds optimizes the electron-transfer paths of the C─N bonding, which enhances the absorption of visible light. Meanwhile,C≡N acts as an electron trap to capture photoexcited electrons, providing the active site for the reduction of H+ to hydrogen. The photocatalytic hydrogen evolution efficiency of SDCN (1613.5µmolg-1h-1) is 31.5 times higher than that of pristine MCN (51.2µmolg-1h-1). The charge separation situation and charge transfer mechanism of the photocatalysts are investigated in detail by a combination of experimental and theoretical calculations.

High-Valence Mn MOF Inspired by Laccase Mediators Enables Versatile Nature-Mimicking Catalysis.

In nature, active Mn3+ -ligand complexes produced by laccase catalyzed oxidation can act as the low-molecular mass, diffusible redox mediators to oxidize the phenolic substrates overcoming the limitations of natural enzymes. Learning from the metal-ligand coordination of natural functional units, high-valence Mn metal-organic framework (Mn MOF) is constructed to simulate the catalysis in natural mediator system. Benefiting from the characteristics of nanoscale size, rich metal coordination unsaturated sites, and mixed valence state dominated by Mn(III), Nano Mn(III)-TP exhibits superior laccase-mimicking activity, whose Vmax (maximal reaction rate) is much higher than that of natural laccase. Referring to natural systems, relevant free radical experiments prove that the material induces the production of active oxygen species with the assistance of carboxylic acid, and active oxygen species further oxidize phenolic substrates. Based on its robust performances, the primary oxidative degradation of an emerging pollutant triclosan (TCS) is creatively applied, an important antiasthmatic medicine terbutaline sulfate (TBT) detection, and the synthesis of non-toxic and black near-natural dyes for dyeing. By simulating the essential mediators of natural enzymatic catalysis, an Mn MOF-based material that demonstrates multiple novel applications is successfully developed, which introduces a new reliable strategy for achieving versatile nature-mimicking catalysis.

Synergistic effects enabled efficient photocatalytic removal of ofloxacin antibiotic in wastewater by layered double hydroxides loaded lignin-derived carbon fibers

The environmental problems caused by the abuse of antibiotics are raising serious attention, and the removal of antibiotics in wastewater is meaningful yet challenging. In this work, lignin-derived carbon fibers loaded layered double hydroxides (LDH@LCF) has been prepared for the removal of ofloxacin (OFX) from wastewater via photocatalysis, which exhibit a high degradation efficiency of 96 % under visible light and maintained 90 % after five reuses. The effects of Zn2+/Fe3+ in the samples and other parameters affecting the photocatalytic efficiency of OFX have been systematically investigated. Results demonstrated that the enhanced photocatalytic efficiency is derived from the synergistic effect of the Zn2+ and Fe3+ in the LDH with a reduced band gap of the catalyst, higher number of oxygen and metal unsaturated coordination sites, and rapid removal of photogenerated electrons. The working mechanism and degradation pathways for OFX by LDH@LCF are also elucidated in detail.

Promoting elemental mercury immobilization performance from smelting flue gas over a wide temperature range via cobalt-doped copper sulfide adsorbents

Copper sulfide (CuS) sorbent exhibits great potential for gaseous elemental mercury (Hg0) decontamination, but it still suffers from a narrow operating temperature. Therefore, designing advanced CuS sorbents that have a high activity level for capturing Hg0 and thermal stability at a high temperature range is challenging. Herein, we propose a metal doping strategy to fabricate a bimetallic sulfide adsorbent. Benefiting the unique structure and composition, a mesoporous structure and an abundance of unsaturated sulfur sites ensure that CuxCo(1–x)Sy provides a desirable level of adsorption for Hg0. The experimental results indicate the optimum Co doping mass concentration of 5 %. The Cu0.95Co0.05Sy not only performs satisfactory Hg0 adsorption at elevated temperatures (Hg0 average adsorption efficiency of over 97.3 %, Hg0 average adsorption rate of over 2.7 μg/g/min), but also presents an exciting regeneration and recycle performance (a Hg0 adsorption efficiency of over 94 % after 10 cycles). The adsorption capacity of Cu0.95Co0.05Sy at the breakthrough threshold of 25 % reaches 5.22 mg/g, surpassing most of metal sulfide sorbents for Hg0 immobilization at 150 °C. As far as Hg0 adsorption is concerned, the composition of typical smelting flue gases has almost no effect. According to further studies, unsaturated coordination short-chain sulfur (S22−) sites are essential for adsorption of Hg0 and are capable of directly forming α-HgS from Hg0. In both the contrast experiment and density functional theory calculations, the cobalt doping strategy enhances the thermal stability of the active S22− ligand and the Hg0 adsorption properties. This study not only provide a prospective adsorbent for Hg0 sequestration at wide temperature range, but also explores a method of utilizing gaseous contaminants for resource utilization.

Atomic Insights into the Competitive Edge of Nanosheets Splitting Water.

The oxygen evolution reaction (OER) provides the protons for many electrocatalytic power-to-X processes, such as the production of green hydrogen from water or methanol from CO2. Iridium oxohydroxides (IOHs) are outstanding catalysts for this reaction because they strike a unique balance between activity and stability in acidic electrolytes. Within IOHs, this balance varies with the atomic structure. While amorphous IOHs perform best, they are least stable. The opposite is true for their crystalline counterparts. These rules-of-thumb are used to reduce the loading of scarce IOH catalysts and retain the performance. However, it is not fully understood how activity and stability are related at the atomic level, hampering rational design. Herein, we provide simple design rules (Figure 12) derived from the literature and various IOHs within this study. We chose crystalline IrOOH nanosheets as our lead material because they provide excellent catalyst utilization and a predictable structure. We found that IrOOH signals the chemical stability of crystalline IOHs while surpassing the activity of amorphous IOHs. Their dense bonding network of pyramidal trivalent oxygens (μ3Δ-O) provides structural integrity, while allowing reversible reduction to an electronically gapped state that diminishes the destructive effect of reductive potentials. The reactivity originates from coordinative unsaturated edge sites with radical character, i.e., μ1-O oxyls. By comparing to other IOHs and literature, we generalized our findings and synthesized a set of simple rules that allow prediction of stability and reactivity of IOHs from atomistic models. We hope that these rules will inspire atomic design strategies for future OER catalysts.

Endowing 1T'-ReS2 Nanosheets with Sonopiezoelectric Property by Theoretical-Guided Vacancy-Manipulated Peierls Distortion for Tumor Ferroptosis Therapy.

Sonopiezoelectric therapy harnesses piezoelectric materials to efficiently generate destructive reactive oxygen species when exposed to ultrasound. This innovative approach shows promise for tumor treatment by combining precise targeting of tumor sites through noninvasive ultrasound control with high reactive oxygen species generation capabilities via the piezoelectric effect. This study utilizes a theoretical-guided method to manipulate atomic vacancy defects and regulate the Peierls distortion in 1T'-ReS2 nanosheets, thereby imparting them with sonopiezoelectric properties not inherent to the original material. Furthermore, the plentiful unsaturated sites of ReS2 nanosheets endow them with excellent catalase- and peroxidase-mimicking activities. The reactive oxygen species generation by the engineered ReS2 nanosheets also leads to the depletion of glutathione. These capabilities are leveraged for tumor ferroptosis therapy via the classical pathway involving the 7-member 11-glutathione-GPX4 signaling axis, alongside the downregulation of dihydroorotate dehydrogenase and ferritin levels and the upregulation of fatty acid CoA ligase 4 expression. This showcases the innovative approach and potential applications of employing 1T'-ReS2 nanosheets in cancer treatment through theoretical design and materials engineering.

Structural development on Ru and RuO2 electrodes during oxygen evolution – a soft X-ray absorption spectroscopy approach

Time resolved in-situ X-ray absorption spectroscopy (XAS) in soft X-ray region was used to characterize polarized interphase on Ru and Ru oxide based electrodes under oxygen evolution reaction (OER) conditions. XAS spectra were used to align the type and population of oxygen-containing species formed at electrodes at anodic potentials with local electronic structure of the OER catalyst. The soft XAS data do not identify a single rate limiting process for OER at potentials negative to 1.7 V vs. RHE. Individual intermediates of the oxygen evolution process coexist at the surface at potentials preceding the actual OER onset. The OER is accompanied with redistribution of the electron density resulting for a start of the catalytic cycle reflecting the transfer of the electrons from water to the external circuit during catalyzed water oxidation. The observed spectral behavior indicates a confinement of the OER to the coordination unsaturated sites (cus) at the surface.