Unpaired Electron Density Research Articles

DC24: A new density coherence functional for multiconfiguration density-coherence functional theory.

In this study, we explored several alternative functional forms to construct more accurate and more physical density coherence (DC) functionals for multiconfiguration density-coherence functional theory. Each functional is parameterized against the same database as used in our previous work. The best DC functional, which is called DC24, has a more physical interpretation, and-as a side benefit-it also has a mean unsigned error of 1.73 kcal/mol, which is a 9% improvement as compared to the previous functional. The article also contains a new definition of the unpaired electron density, which may be useful in other contexts as well.

Imination of Sterically Unshielded o‐Quinones in the Coordination Sphere of Zinc (II)

Abstracto‐Iminoquinones bearing unshielded chelating OCCN(R) site were synthesized in high yields in the zinc coordination sphere as the neutral complexes. The stability of one‐electron‐reduced forms of these o‐iminoquinones and the distribution of the unpaired electron density in the corresponding radical anion species were studied using cyclic voltammetry and EPR spectroscopy methods

Mechanistic Studies of Iron-PyBOX-Catalyzed Olefin Amino-Oxygenation with Functionalized Hydroxylamines.

Iron-catalyzed amino-oxygenation of olefins often uses discrete ligands to increase reactivity and broaden substrate scope. This work is focused on examining ligand effects on reactivity and in situ iron speciation in a system which utilizes a bisoxazoline ligand. Freeze-trapped 57Fe Mössbauer and EPR spectroscopies as well as SC-XRD experiments were utilized to isolate and identify the species formed during the catalytic reaction of amino-oxygenation of olefins with functionalized hydroxylamines, as well as in the precatalytic mixture of iron salt and ligand. Experiments revealed significant influence of ligand and solvent on the speciation in the precatalytic mixture which led to the formation of different species which had significant influence on the reactivity. In situ experiments showed no evidence for the formation of an Fe(IV)-nitrene intermediate, and the isolation of a reactive intermediate was unsuccessful, suggesting that the use of the PyBOX ligand led to the formation of more reactive intermediates than observed in the previously studied system, preventing direct detection of intermediate species. However, isolation of the seven coordinate Fe(III) species with three carboxylate units of the hydroxylamine and spin-trap EPR experiments suggest formation of a species with unpaired electron density on the hydroxylamine nitrogen, which is in accordance with formation of a potential iron iminyl radical species, as recently proposed in literature. An observed increase in yield when substrates devoid of C-H bonds as well as isolation of a ring-closed dead-end species with substrates containing these bonds suggests the identity of the functionalized hydroxylamine can dictate the reactivity observed in these reactions.

Polyradical character assessment using multireference calculations and comparison with density-functional derived fractional occupation number weighted density analysis.

The biradicaloid character of different types of polycyclic aromatic hydrocarbons (PAHs) based on small band gaps is an important descriptor to assess their opto-electronic properties. In this work, the unpaired electron densities and numbers of unpaired electrons (NU values) calculated at the high-level multireference averaged quadratic coupled-cluster (MR-AQCC) method are used to develop a test set to assess the capabilities of different biradical descriptors based on density functional theory. A benchmark collection of 29 different compounds has been selected. The DFT descriptors contain primarily the fractional occupation number weighted electron density (FOD) based on simplified thermally-assisted-occupation density functional theory (TAO-DFT) calculations, but the singlet-triplet energy difference and other descriptors denoted as y0 and nLUNO have been considered as well. After adjustment of the literature-recommended finite temperatures, a very good, detailed agreement between unpaired density and FOD analysis is observed which is also manifested in excellent statistical correlations. The other two descriptors also show good correlations even though the absolute scaling is not satisfactory. A new linear fit of FOD data to the MR-AQCC reference values leads to an improved regression relation for determining the recommended finite temperature value in dependence of the Hartree-Fock exchange. This provides the basis for fast and reliable assessment of the biradical character of many classes of PAHs without the need for performing computationally extended MR calculations.

A rare isocyanide derived from an unprecedented neutral yttrium(ii) bis(amide) complex.

A room temperature stable complex formulated as Y(NHAr*)2 has been prepared, where Ar* = 2,6-(2,4,6-(iPr)3C6H2)C6H3, by KC8 reduction of ClY(NHAr*)2. Based on EPR evidence, Y(NHAr*)2 is an example of a d1 Y(ii) complex with significant delocalization of the unpaired electron density from the metal to the ligand. The isolation of molecular divalent metal complexes is challenging for rare earth elements such as yttrium. In fact, stabilization of the divalent state requires judicious ligand design that allows the metal center to be coordinatively saturated. Divalent rare earth elements tend to be reactive towards various substrates. Interestingly, Y(NHAr*)2 reacts as a radical donor towards t BuNC to generate an unusual yttrium isocyanide complex, CNY(NHAr*)2, based on spectroscopic evidence and single-crystal X-ray diffraction data.

Electron induced efficient dechlorination of trichlorethylene with S doped Fe2B: The enhancement mechanism of S

In this work, S doped Fe2B (Fe2B-S) was synthesized by sintering method and applied for the enhanced dechlorination of trichlorethylene (TCE). The degradation ratio (D) of TCE was 99.8% with reaction rate constant (kobs) of 0.956 h−1 by 10.0at% S doped Fe2B (corresponding to Fe2B-S10.0), compared to D and kobs values 37.3% and 0.067 h−1 by Fe2B, respectively. The major dechlorination products of acetylene, ethene, ethane and C3-C6 hydrocarbon compounds were observed from a reductive β-elimination pathway. S doped and undoped Fe2B could form the first-level in-situ galvanic cell, and the returned S provided a second-level galvanic cell to further enhance electron transfer. The doped S worked as electron donor to increase the density of localized unpaired electrons, and the electron enriched Fe atoms leading to stronger reducibility were verified by the density functional theory (DFT) calculation. This work provides a complete insight into the enhancement mechanism of S doped Fe2B and guides the potential design of zero-valent iron (ZVI) with properties tailored for chlorinated hydrocarbons dechlorination.

Designed Amyloid Fibers with Emergent Melanosomal Functions.

Short peptides designed to self-associate into amyloid fibers with metal ion-binding ability have been used to catalyze various types of chemical reactions. This manuscript demonstrates that one of these short-peptide fibers coordinated with CuII can exhibit melanosomal functions. The coordinated CuII and the amyloid structure itself are differentially functional in accelerating oxidative self-association of dopamine into melanin-like species and in regulating their material properties (e.g., water dispersion, morphology, and the density of unpaired electrons). The results have implications for the role of functional amyloids in melanin biosynthesis and for designing peptide-based supramolecular structures with various emergent functions.

λ-DFVB(U): A hybrid density functional valence bond method based on unpaired electron density.

In this paper, a hybrid density functional valence bond method based on unpaired electron density, called λ-DFVB(U), is presented, which is a combination of the valence bond self-consistent field (VBSCF) method and Kohn-Sham density functional theory. In λ-DFVB(U), the double-counting error of electron correlation is mitigated by a linear decomposition of the electron-electron interaction using a parameter λ, which is a function of an index based on the number of effectively unpaired electrons. In addition, λ-DFVB(U) is based on the approximation that correlation functionals in KS-DFT only cover dynamic correlation and exchange functionals mimic some amount of static correlation. Furthermore, effective spin densities constructed from unpaired density are used to address the symmetry dilemma problem in λ-DFVB(U). The method is applied to test calculations of atomization energies, atomic excitation energies, and reaction barriers. It is shown that the accuracy of λ-DFVB(U) is comparable to that of CASPT2, while its computational cost is approximately the same as VBSCF.

A Combined Spectroscopic and Computational Study on the Mechanism of Iron-Catalyzed Aminofunctionalization of Olefins Using Hydroxylamine Derived N-O Reagent as the "Amino" Source and "Oxidant".

Herein, we study the mechanism of iron-catalyzed direct synthesis of unprotected aminoethers from olefins by a hydroxyl amine derived reagent using a wide range of analytical and spectroscopic techniques (Mössbauer, Electron Paramagnetic Resonance, Ultra-Violet Visible Spectroscopy, X-ray Absorption, Nuclear Resonance Vibrational Spectroscopy, and resonance Raman) along with high-level quantum chemical calculations. The hydroxyl amine derived triflic acid salt acts as the “oxidant” as well as “amino” group donor. It activates the high-spin Fe(II) (St = 2) catalyst [Fe(acac)2(H2O)2] (1) to generate a high-spin (St = 5/2) intermediate (Int I), which decays to a second intermediate (Int II) with St = 2. The analysis of spectroscopic and computational data leads to the formulation of Int I as [Fe(III)(acac)2-N-acyloxy] (an alkyl-peroxo-Fe(III) analogue). Furthermore, Int II is formed by N–O bond homolysis. However, it does not generate a high-valent Fe(IV)(NH) species (a Fe(IV)(O) analogue), but instead a high-spin Fe(III) center which is strongly antiferromagnetically coupled (J = −524 cm–1) to an iminyl radical, [Fe(III)(acac)2-NH·], giving St = 2. Though Fe(NH) complexes as isoelectronic surrogates to Fe(O) functionalities are known, detection of a high-spin Fe(III)-N-acyloxy intermediate (Int I), which undergoes N–O bond cleavage to generate the active iron–nitrogen intermediate (Int II), is unprecedented. Relative to Fe(IV)(O) centers, Int II features a weak elongated Fe–N bond which, together with the unpaired electron density along the Fe–N bond vector, helps to rationalize its propensity for N-transfer reactions onto styrenyl olefins, resulting in the overall formation of aminoethers. This study thus demonstrates the potential of utilizing the iron-coordinated nitrogen-centered radicals as powerful reactive intermediates in catalysis.

Where is the unpaired electron density? A combined experimental and theoretical finding on the geometric and electronic structures of the Co(III) and Mn(IV) complexes of the unsymmetrical non-innocent pincer ONS ligand.

The tridentate pincer ligand [LONS]3- with the ONS donor set was generated in situ by cleaving the disulfane linkage of the pristine redox-active H4Sar(AP/AP) ligand during the complexation reaction with Co(II) and Mn(II) salts in the presence of air and Et3N. X-ray crystal structure analysis of the Co complex (1) and Mn complex (2) revealed that both the complexes were neutral in charge and six-coordinate with the meridional coordination of the two pincer [LONS]n- ligands. The Co ion was in the trivalent state, while the Mn ion was in the tetravalent state. Thus, the generated two pincer [LONS]3- ligands were non-innocent and cumulatively were in trinegative and tetranegative charges for the respective complexes. The intraligand bond distances of the coordinating ligands in each complex were similar, implying the same oxidation/electronic structure of the two ligating units. Variable-temperature magnetic susceptibility measurements revealed an S = 1/2 ground state for each complex. X-band EPR measurements unambiguously established the presence of a ligand-based unpaired electron in complex 1, and in complex 2, the unpaired electron was at the Mn centre. DFT-based theoretical calculations suggested the three-electron oxidation of the two ligating units in complex 1. Two iminosemiquinone radicals were of opposite spins (α-spin and β-spin) and a thiyl radical in either α-spin or β-spin was delocalized between two sulfur atoms. Thus, the antiferromagnetic coupling among the two opposite spins provided an S = 1/2 ground state and resulted in the radical-based EPR spectrum. In complex 2, each ligating pincer unit contained an iminosemiquinone radical that interacted antiferromagnetically with the Mn(IV)-based three unpaired electrons. This rendered a doublet ground state with the residual electron density located at the Mn center.

Crystal and Substituent Effects on Paramagnetic NMR Shifts in Transition-Metal Complexes.

Nuclear magnetic resonance (NMR) spectroscopy of paramagnetic molecules provides detailed information about their molecular and electron-spin structure. The paramagnetic NMR spectrum is a very rich source of information about the hyperfine interaction between the atomic nuclei and the unpaired electron density. The Fermi-contact contribution to ligand hyperfine NMR shifts is particularly informative about the nature of the metal–ligand bonding and the structural arrangements of the ligands coordinated to the metal center. In this account, we provide a detailed experimental and theoretical NMR study of compounds of Cr(III) and Cu(II) coordinated with substituted acetylacetonate (acac) ligands in the solid state. For the first time, we report the experimental observation of extremely paramagnetically deshielded 13C NMR resonances for these compounds in the range of 900–1200 ppm. We demonstrate an excellent agreement between the experimental NMR shifts and those calculated using relativistic density-functional theory. Crystal packing is shown to significantly influence the NMR shifts in the solid state, as demonstrated by theoretical calculations of various supramolecular clusters. The resonances are assigned to individual atoms in octahedral Cr(acac)3 and square-planar Cu(acac)2 compounds and interpreted by different electron configurations and magnetizations at the central metal atoms resulting in different spin delocalizations and polarizations of the ligand atoms. Further, effects of substituents on the 13C NMR resonance of the ipso carbon atom reaching almost 700 ppm for Cr(acac)3 compounds are interpreted based on the analysis of Fermi-contact hyperfine contributions.

Strong Ferromagnetic Exchange Coupling and Single-Molecule Magnetism in MoS43--Bridged Dilanthanide Complexes.

We report the synthesis and characterization of the trinuclear 4d-4f compounds [Co(C5Me5)2][(C5Me5)2Ln(μ-S)2Mo(μ-S)2Ln(C5Me5)2], 1-Ln (Ln = Y, Gd, Tb, Dy), containing the highly polarizable MoS43- bridging unit. UV-Vis-NIR diffuse reflectance spectra and DFT calculations of 1-Ln reveal a low-energy metal-to-metal charge transfer transition assigned to charge transfer from the singly occupied 4dz2 orbital of MoV to the empty 5d orbitals of the lanthanides (4d in the case of 1-Y), mediated by sulfur-based 3p orbitals. Electron paramagnetic resonance spectra collected for 1-Y in a tetrahydrofuran solution show large 89Y hyperfine coupling constants of A⊥ = 23 MHz and A|| = 26 MHz, indicating the presence of significant yttrium-localized unpaired electron density. Magnetic susceptibility data support similar electron delocalization and ferromagnetic Ln-Mo exchange for 1-Gd, 1-Tb, and 1-Dy. This ferromagnetic exchange gives rise to an S = 15/2 ground state for 1-Gd and one of the largest magnetic exchange constants involving GdIII observed to date, with JGd-Mo = +16.1(2) cm-1. Additional characterization of 1-Tb and 1-Dy by ac magnetic susceptibility measurements reveals that both compounds exhibit slow magnetic relaxation. Although a Raman magnetic relaxation process is dominant for both 1-Tb and 1-Dy, an extracted thermal relaxation barrier of Ueff = 68 cm-1 for 1-Dy is the largest yet reported for a complex containing a paramagnetic 4d metal center. Together, these results provide a potentially generalizable route to enhanced nd-4f magnetic exchange, revealing opportunities for the design of new nd-4f single-molecule magnets and bulk magnetic materials.

Facile functionalization of multi walled carbon nanotubes with L-Proline: A spectroscopic approach

Oxidized multiwalled carbon nanotubes were functionalized with proline using a simple ultrasonic blending process. This work is a preliminary studies of analyzing the functionalization of L-Proline (L-Pro) with MWCNTs . The chemical attachment of L-Pro on CNTs is of significant interest, since it not only improve the nanotube solubility but also opens a broad prospect for their biomedical applications. The interaction between the CNTs and amino acid is very important for understanding the interaction mechanism between CNTs and biomolecules. The various properties of the functionalized samples were evaluated by the spectroscopic characterization techniques like X-ray diffraction, UV–Vis, Scanning electron microscopy, Transmission electron microscope, Fourier transform infrared and Raman analysis. The observed sharp peaks attributes to the higher degree of crystalline nature. The shift in the XRD pattern indicates that the attachment of L-Pro on the surface of oxidized MWCNTs. The appearance of new peaks are due to the presence of the L-Pro on the MWCNTs, which confirms the attachment of the Pro on the surface of the MWCNTs. The UV–Vis spectra shows the shift in the lower cut off wavelength of the L-Pro functionalized MWCNTs, which confirms the successful attachment of the L-Pro on the surface of the MWCNTs. From the UV analysis, the new broad characteristic peaks appeared at 381 nm, 387 nm, 388 nm of L-Pro functionalized MWCNTs can be attributed to the charge transfer complex available on the MWCNTs. The L-Proline functionalized MWCNTs shows a high surface roughness, which is due to the partial damage of the graphitic carbon during functionalization. The presence of C–N stretching vibrations confirm the successful functionalization. The higher intensity ratio reveals that the greater extent of C=C rupture, which indicates the higher covalent functionalization on the surfaces of the MWCNTs. The enhancement of the ID/IG ratio of L-Pro functionalized MWCNTs are due to the amidation, which is the carboxylic acid group of oxidized MWCNTs reacts with the amino groups of Proline and due to the results of the radical reaction with MWCNTs. The g-values from EPR analysis confirms that the system remains isotropic which is due to the finite unpaired electron density. Hence, the successful functionalization of MWCNTs with L-Proline is confirmed, which is highly useful for further chemistry with other biomolecules like peptides, proteins and also leads to the research for the treatment of neuro degenerative diseases.

Synthesis of Acridinium Photocatalysts via Site-Selective C–H Alkylation

Acridinium dyes have been broadly used as photocatalysts, but it remains synthetically challenging to fine-tune their catalytic performance by functionalization of their structural cores. Acridiniu...

Magnetic Coupling in a Tris-hydroxo-Bridged Chromium Dimer Occurs through Ligand Mediated Superexchange in Conjunction with Through-Space Coupling.

Quantum chemistry can explain and predict many properties of molecules and materials. However, there are some systems, among which are magnetic systems, that remain a challenge for all electronic structure methods. The tris-hydroxo-bridged chromium dimer, known as Kremer's dimer, contains two antiferromagnetically coupled chromium(III) metal ions and provides a classic example of a magnetic molecular system that poses a challenge for computational quantum chemistry. In this study we show that combining multiconfiguration pair-density functional theory with large-active-space density matrix renormalization group wave functions can predict the correct spin-state ordering, energy spacing, and magnetic coupling constant. We also use the unpaired electron density to analyze the superexchange contribution. This methodology offers promise for revolutionary rational design of molecular magnets.

Ca24Al28O64]4+(4e−) electrides ceramic with high-electron concentration rapidly fabricated by spark plasma sintering of Ca, Al organic powder precursor in spark plasma sintering

The electrides of [Ca24Al28O64]4+(4e−) (C12A7:e−) was quickly fabricated by Ca, Al organic powder precursor through spark plasma sintering (SPS) at 750 °C for 10 min. There exist a large amount of reducing gas CO generated by heating Ca, Al organic powder acting as a perfect reducing agent in the high-energy DC pulse current and DC electric field of the SPS. By analyzing the phase, elements, structural composition, and electronic state of the sample, it is found that the phase and elemental composition of the sample meet the standard C12A7:e− and the density of the sample is more than 99%. The EPR results show that the sample has a sharp absorption peak at a magnetic field strength of about 352 mT, and the ratio of the maximum value to the minimum amount of the absorption peak is 2.67. This EPR curve with Dyson characteristics indicates that there is a high density of unpaired electrons inside the sample. The sample showed a significant ultraviolet absorption peak at 2.5 eV, and the calculated electron concentration of the sample reached 2.3 × 1021cm−3. TG/DTA, Raman spectroscopy, and XPS result further fully proved the successful fabrication of C12A7:e−. The electronic structure of C12A7:e− calculated using the first-principles show that the CCB of C12A7:e− not only traverses the Fermi surface as a whole, but also shows a narrower state with a smaller effective mass of electron transition, and the energy between CCB and FCB is 0.68eV. This indicates that C12A7:e− has excellent electrical transport characteristics like typical metals, which mainly from the contribution of s-state electrons of Ca atoms and p-state electrons of Al atoms. The theoretical results support our experiments. This fabricating method makes rapid large-scale production of C12A7:e− with high electron concentration possible.

Conjugated‐carbon nanostructures: Emergences

AbstractGeneral emergent features of conjugated‐carbon nanostructures are sought. Here, “general” indicates applicability over a broad class of such structures, including graphene and buckytubes, possibly with boundaries or other sorts of defects or decorations, or rather general substructures of graphene or of buckytubes. In addition, “emergent” means that different characteristics and properties are novel and are evidenced from different models, for example, from resonance theory and Hückel theory, preferably with evidence that the features persist upon elaboration. One robust emergent feature is “Dirac cones” in the band structure of graphene and some related materials. Another interesting feature is novel “blended” boundary orbitals that are delocalized longitudinally along the boundary direction while being variably localized in the transverse direction. Furthermore, defects at the ends of polymer chains may be localized or delocalized depending on local features—although the ideas apply more widely to different conjugated‐carbon structures including molecules. Explicit formulas are derived to elucidate the asymptotic behavior of unpaired electron density at the ends of selected benzenoid polymers and its relation to the associated HOMO‐LUMO gap. Our approach offers a general framework to understand ab initio results, which may, at first sight, appear to be unconventional or counterintuitive to some common ideas of bonding patterns in conjugated carbon nanostructures.

Topological population analysis and pairing/unpairing electron distribution evolution: Atomic B3+ cluster bending mode, a case study

Local and non-local topological treatment of electronic distributions are applied to a simple out of equilibrium case of an electron-deficient three-atom cluster, B3+. The bending movement is described in detail through the onset and disappearance of critical points defining two kinds of molecular structures, characterizing a transition state (TS) and predicting two stable equilibrium geometries. All points in this rich evolution and the structural change in the out of equilibrium conformations has been featured and distinguished by the behavior of the population magnitudes and of the paired and unpaired electron densities within the non-local and local points of view of the topological formalism. The unpaired or electron hole density appears as relevant in both versions, the non-local or integrated one, in which it is sometimes called free-valence and also for its complementary counterpart, the local one, to describe and to quantify the interatomic interactions. The stability of the cluster B3+ is characterized in terms of a topologically defined ring structure and the highest total two- and three-center populations, thus showing the role of the geometry, the covalence, and the complex patterns. Consideration of the electron correlation effects constitutes the basement of the results gathered, thus displaying their influence in the formation and breaking of boron bonding interactions.

Interplay of Biradicaloid Character and Singlet/Triplet Energy Splitting for cis-/trans-Diindenoacenes and Related Benzothiophene-Capped Oligomers as Revealed by Extended Multireference Calculations.

The biradicaloid character of different types of polycyclic aromatic hydrocarbons is an important quality that guides the development of new materials with interesting magneto-optical properties. Diindenoacene-based systems represent such a class of promising compounds. In this work, the three types trans-diindenoacenes, cis-diindenoacenes, and trans-dicyclopentaacenobis(benzothiophenes) have been studied by means of advanced ab initio methods. The descriptors singlet/triplet splitting energy (ΔES-T), effective number of unpaired electrons (NU), unpaired electron density, and the harmonic oscillator measure of aromaticity have been used to characterize the biradicaloid properties of these species. For all trans structures, low-spin singlet ground states were found, in agreement with previous investigations. Increasing the length of the inner acene chain decreased the ΔES-T and strongly increased the NU values of the singlet state. The cis-diindenoacenes displayed a greatly increased biradicaloid character, indicating enhanced chemical instability. The thiophene rings in the trans-dicyclopentaacenobis(benzothiophenes) structures were found to simultaneously restrict the unpaired electron density from extending into the terminal six-membered rings and confine the unpaired electron density found in the core benzene rings.

Synthetic investigation of competing magnetic interactions in 2D metal-chloranilate radical frameworks.

The discovery of emergent materials lies at the intersection of chemistry and condensed matter physics. Synthetic chemistry offers a pathway to create materials with the desired physical and electronic structures that support fundamentally new properties. Metal–organic frameworks are a promising platform for bottom-up chemical design of new materials, owing to their inherent chemical predictability and tunability relative to traditional solid-state materials. Herein, we describe the synthesis and magnetic characterization of a new 2,5-dihydroxy-1,4-benzoquinone based material, (NMe2H2)3.5Ga2(C6O4Cl2)3 (1), which features radical-based electronic spins on the sites of a kagomé lattice, a geometric lattice known to engender exotic electronic properties. Vibrational and electronic spectroscopies, in combination with magnetic susceptibility measurements, revealed 1 exhibits mixed valency between the radical-bearing trianionic and diamagnetic tetraanionic oxidation states of the ligand. This unpaired electron density on the ligand forms a partially occupied kagomé lattice where approximately 85% of the lattice sites are occupied with an S = ½ spin. We found that gallium mediates ferromagnetic coupling between ligand spins, creating a ferromagnetic kagomé lattice. By modulation of the interlayer spacing via post-synthetic cation metathesis of 1 to (NMe4)3.5Ga2(C6O4Cl2)3 (2) and (NEt4)2(NMe4)1.5Ga2(C6O4Cl2)3 (3), we determined the nature of the magnetic coupling between neighboring planes is antiferromagnetic. Additionally, we determined the role of the metal in mediating this magnetic coupling by comparison of 2 with the In3+ analogue, (NMe4)3.5In2(C6O4Cl2)3 (4), and we found that Ga3+ supports stronger superexchange coupling between ligand-based spins than In3+. The combination of intraplanar ferromagnetic coupling and interplanar antiferromagnetic coupling exchange interactions suggests these are promising materials to host topological phenomena.