Unilateral Cleft Lip Research Articles

The Correlation Between Static and Dynamic Facial Asymmetry in Unilateral Cleft Lip and Palate.

Assess the relationship between static and dynamic facial asymmetry in unilateral cleft lip and palate during maximum smile. Retrospective cross-sectional study. Multidisciplinary dentofacial planning clinic. Thirty-one surgically managed non-syndromic unilateral cleft lip and palate patients between the ages of 13 to 17 years. Dynamic three-dimensional (3D) facial images (four-dimensional [4D]) throughout the course of a maximum smile were captured using video stereophotogrammetry at a rate of 60 frames per second, which generated 180 3D images/expression. A generic facial mesh containing more than 7000 vertices was superimposed onto the 3D facial images to quantify and track facial asymmetry throughout the captured sequence. Partial ordinary Procrustes analysis was utilized to calculate an asymmetry score at the rest position, maximum smile, and at the point of maximum mathematical asymmetry. The relationships between the asymmetry at rest and the asymmetry at the point of maximum smile (static 3D), and the maximum mathematical asymmetry (dynamic 4D) were evaluated. Asymmetry scores were higher at maximum smile than at rest. Maximum mathematical asymmetry was observed in most cases during the relaxation phase. Static asymmetry at rest and maximum smile was strongly correlated with the maximum mathematical asymmetry (r = 0.941, P < .001). Static 3D asymmetry at both rest and maximum smile are strongly correlated with dynamic 4D facial asymmetry. The use of 4D imaging, combined with generic mesh conformation and dense correspondence analysis, provides a valid objective measure of facial asymmetry.

The Effect of the Nasal Structure on the Olfactory Cleft Airflow: A Systematic Review.

Conductive olfactory losses mainly involve obstruction of the olfactory cleft (OC) and diminished OC airflow. This study investigated the association between abnormal nasal structure and OC airflow. A systematic search was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis to identify studies on the effect of the nasal structure on the OC airflow and olfaction. A total of 11 studies were included. Nasal vestibule morphological variabilities directly impact the transport of molecules in odorant-laden air to the OC. A greater airflow vortex and a narrower vestibule region intensified the airflow vortex toward the olfactory region. Middle turbinectomy significantly increased the average flux to the OC. The location of the major airflow and airflow velocity maxima shifted towards the OC in patients with septal deviation. The airflow has been redirected into the upper part of the nasal airway in patients with inferior turbinate hypertrophy. For patients with unilateral cleft lip, unilateral nasal airflow on the cleft side has a lower rate and flow. The mean velocity in the posterior OC correlated well with olfaction compared to that in the anterior OC. The nasal polyps (NP) within the middle meatus increased the olfactory airflow but did not enhance the olfaction. NP in the olfactory region or anterior to the olfactory region significantly decreased the olfactory airflow and olfaction. Furthermore, obstruction of the OC did not change the nasal patency. When the OC shape presented with a stenotic slit or lumen structure among patients with conductive olfactory dysfunction without NP, the inspiratory velocity and flow rate within OC were significantly lower than in the healthy control group. Various nasal structural factors affect patterns of OC airflow and olfaction. Identifying the related airflow-limiting structures may promote the comprehensive evaluation of conductive olfactory losses in patients with olfactory dysfunction.

Craniofacial Growth in Children With Unilateral Cleft Lip and Palate: Adopted From China Versus Born in Sweden.

In 2005, the number of internationally adopted children (IAC) with cleft lip and palate (CLP) from China increased globally, followed by an increase in the number of surgical complications. The aim was therefore to evaluate the craniofacial growth of children with unilateral CLP adopted from China and compare with non-adopted peers (NA). Cephalograms taken at 10 and 13 were analysed for the SNA, SNB, ANB, NAPg and NSBa angles. Surgical data were extracted from the medical records. The rate of secondary cleft-related surgery including secondary alveolar bone grafting (SABG) was higher in the IAC group than in the native groups. At age 10, the IAC exhibited higher SNB and NAPg and lower ANB values than the NA-Mod group and a similar pattern was observed at age 13. The IAC group demonstrated significantly lower SNA and ANB and higher NAPg values than the NA-Orig group at age 10. At age 13, lower SNA and ANB and higher SNB, NAPg, and NSBa values were observed in the IAC group compared with the NA-Orig group. Craniofacial growth is not finalized at age 13 years, why additional studies are needed to determine long-term outcomes. Results from this novel study present unfavorable craniofacial growth at age 10 and 13 years of age among IAC with UCLP and indicate an increased need for future orthognathic surgery compared with NA peers.

Finite element analysis of maxillary orthodontic therapies with variable alveolar bone grafts under occlusal forces in patient with unilateral cleft lip and palate

ObjectiveTo investigate the biomechanical effects of maxillary orthodontic treatment on different alveolar bone grafting positions loaded with occlusal forces in an unilateral cleft lip and palate (UCLP) patient.MethodsFinite element analysis was employed to simulate clinical scenarios more accurately by loading with occlusal forces on 8 bone-grafted models during maxillary orthodontic treatment. Displacement and von Mises stress pattern during maxillary protraction, expansion, and combined protraction and expansion were analyzed.ResultsThe seven bone-grafted models exhibited significantly smaller horizontal displacements at the non-cleft side landmarks during maxillary protraction and expansion compared to non-bone grafted models. Additionally, alveolar cleft bone grafted in the upper 1/3 and middle 1/3 exhibited greater asymmetry displacement and stress under maxillary protraction and expansion.ConclusionThe study highlights the necessity of considering occlusal forces in finite element study on orthodontic therapies for UCLP patients. The upper 1/3 and middle 1/3 bone graft conditions may require secondary bone graft supplementation to ensure the effectiveness of maxillary orthodontic treatment.

Egyptian patients with cleft lip: our experience with primary rhinoplasty

BackgroundControversy exists regarding the timing of rhinoplasty for patients with cleft lip as some surgeons shy away from primary correction for fear of causing harm to the growth of the nose and the maxilla.We present our favorable experience with primary rhinoplasty with repair of unilateral cleft lip in Ain Shams University plastic surgery department, providing insights into the specific management of patients of middle eastern descent.MethodsProspective study of 32 patients, ages 3 months- 1 year with unilateral CL presenting to Ain Shams University hospitals between January 2019 and July 2022. Primary rhinoplasty was performed at the time of lip repair. Lip repair was done by Tennison-Randall technique. Evaluation of results was done by expert analysis of photographs, anthropometric measurements, and parents’ satisfaction.ResultsOver-all concordance rate was 93% and inter-observer concordance was 89%. Non-significant differences were found between cleft and noncleft sides regarding nostril dome height, columellar length, and alar width 6 months post-operatively. 81.25% of the parents were very satisfied with the results.ConclusionOur study targeted a cohort of Egyptian patients with unilateral cleft lip, who underwent primary rhinoplasty and the time of lip repair, showing favorable results, supporting the literature advocating for this timing, but limited by relatively short follow up period. To the best of the authors’ knowledge, this is the first study in Egypt to highlight the outcomes and direct experience for primary rhinoplasty with cleft lip repair in an Egyptian population.

Effects of Active Presurgical Orthopaedics Appliances in Infants With Complete Unilateral Cleft Lip and 'T-Shaped' Alveolus: A Preliminary Study.

This study aimed to assess the efficacy of active presurgical orthopaedics appliances in infants presenting with complete unilateral cleft lip and overlapped alveolus (T-shaped alveolus). A retrospective and prospective longitudinal study was performed. Infants diagnosed with complete unilateral cleft lip and overlapped alveolus, received treatment with the active presurgical orthopaedics appliances from June 2020 to June 2023, at Children's Hospital 1, Ho Chi Minh City. The treatment duration averaged 3 months. Pre- and posttreatment casts of noses and alveolus were scanned using TRIOS3 Wireless intraoral scanner (3Shape, Denmark) and analysed with Slicer 5.2.2 software. There were 16 quantitative variables. A pair t-test and Wilcoxon signed ranks were used for analysis. The statistical significance was adopted as p < 0.05. A total 40 patients (17 males, 23 females, mean age 23.85 ± 19.22 days) were evaluated. After treatment, the nostril height increased by 2.62 ± 0.22 mm and the deviation columella decreased by -23.45° ± 2.29°. There was a reduction in cleft gap (-3.77 ± 2.01 mm), and in the overlap of alveolus (-3.71 ± 1.83 mm), the growth of cleft segment increased by 2.27 ± 2.00 mm, while the rotation of the noncleft side alveolus decreased by-5.29° ± 5.31°. The changes werestatistically significant (p < 0.001). Active presurgical orthopaedics appliances improved the nasal deformity and overlapped alveolus morphology in infants with complete unilateral cleft lip and T-shaped alveolus.

Impact of early cleft lip and palate surgery on maxillary growth in 5- and 10-Year-old patients with unilateral cleft lip and palate: a cross-sectional study

ObjectivesThis study evaluated maxillary growth and dental arch relationships at 5 and 10 years of age in patients with unilateral cleft lip and palate (UCLP) who underwent early cleft lip and palate surgery.Methods28 patients with UCLP who underwent cleft lip surgery in neonatal age and cleft palate surgery at average age of 7 months without orthodontic treatment (intervention group) were measured for intercanine and intermolar distances and for dental arch length. These measurements were compared with those of 30 healthy participants in a control group. Dental arch relationships in the intervention group were evaluated by 5-YO index at 5 years and the GOSLON Yardstick score at 10 years of patients’ age.ResultsPatients in the intervention group had significantly shorter mean intercanine distance and arch length than control patients at both 5 and 10 years of age (p<.001 for all). There were no significant differences in intermolar distance at both 5 (p = .945) and 10 years (p = .105) of patients’ age. The average 5YO index increased from 2.46 to an average GOSLON 10-year score of 2.89 in intervention group.ConclusionIntercanine distance and dental arch length of patients with UCLP are significantly reduced at 5 and 10 years after early cleft lip and palate surgeries compared to the healthy population. Dental arch relationships at 5 and 10 years of patients with UCLP show comparable outcomes to those reported by other cleft centers.Clinical significanceThis study evaluates maxillary growth in UCLP patients 5 and 10 years of age who underwent early primary lip and palate surgery.

Cleft Lip and Palate Classification Through Vision Transformers and Siamese Neural Networks

This study introduces a novel approach for the diagnosis of Cleft Lip and/or Palate (CL/P) by integrating Vision Transformers (ViTs) and Siamese Neural Networks. Our study is the first to employ this integration specifically for CL/P classification, leveraging the strengths of both models to handle complex, multimodal data and few-shot learning scenarios. Unlike previous studies that rely on single-modality data or traditional machine learning models, we uniquely fuse anatomical data from ultrasound images with functional data from speech spectrograms. This multimodal approach captures both structural and acoustic features critical for accurate CL/P classification. Employing Siamese Neural Networks enables effective learning from a small number of labeled examples, enhancing the model’s generalization capabilities in medical imaging contexts where data scarcity is a significant challenge. The models were tested on the UltraSuite CLEFT dataset, which includes ultrasound video sequences and synchronized speech data, across three cleft types: Bilateral, Unilateral, and Palate-only clefts. The two-stage model demonstrated superior performance in classification accuracy (82.76%), F1-score (80.00–86.00%), precision, and recall, particularly distinguishing Bilateral and Unilateral Cleft Lip and Palate with high efficacy. This research underscores the significant potential of advanced AI techniques in medical diagnostics, offering valuable insights into their application for improving clinical outcomes in patients with CL/P.

Effect of Y-shaped Nasal Columella Made of Autologous Cartilage in Secondary Nasal Deformity after Cleft Lip Surgery.

Due to the diversity and complexity of tissues involved in secondary nasal deformities following unilateral cleft lip, secondary nasal deformity correction surgeries are challenging and often yield unsatisfactory results, posing a difficult problem for plastic surgeons. Autologous cartilage, with its low sculpting difficulty, minimal absorption, and stable tissue compatibility, is considered the optimal material for reconstructing the columella, nasal tip, and alar. This study analyzed the clinical outcomes of using autologous cartilage to create a Y-shaped columella to correct secondary nasal deformities after cleft lip surgery. In this retrospective study, 75 patients with secondary nasal deformity after unilateral cleft lip surgery were treated from January 2018 to December 2023. Appropriate costal cartilage, auricular cartilage, and iliac crest cartilage were fashioned into Y-shaped stents and implanted into the nasal columella of the patients to strengthen the tip cartilage. The free alar cartilage was sutured and fixed with a Y-shaped bracket. The wound healing rate, subjective satisfaction evaluation, and complications were analyzed. The nasal appearance, nasal deformity classification, and objective indices of healthy and affected nasal sides, function, and quality of life were compared before and after the operation. All patients healed well during the first stage without related complications, and the average incision healing time was 5.16 ± 1.37 days. The scores of nasal tip position, nasal tip shape, nostril shape, nasal dorsum shape, and nasal floor shape at 6 months post-operation were significantly lower compared to pre-operation (p < 0.001). The grade of nasal deformity at 6 months post-operation was lower than the pre-operation (p < 0.001). Pre-operation, the nasal base and nasal width of the affected side were higher than those of the healthy side, while the nasal columellar and nostril height were lower (p < 0.001). At 6 months post-operation, the nasal base and nasal width decreased, and the nasal columellar and nostril height increased (p < 0.001), with no significant difference between the two sides (p > 0.05). The nasal obstruction symptom evaluation (NOSE) and Functional Rhinoplasty Outcome Inventory-17 (FROI-17) scores at 6 months post-operation were significantly lower than pre-operation, while the rhinoplasty outcome evaluation (ROE) score was higher (p < 0.001). The total patient satisfaction was 97.33% (73/75). Y-shaped nasal columella made of autologous cartilage can effectively correct secondary nasal deformity after cleft lip surgery, improve nasal alar collapse, lengthen nasal columella, elevate nasal end, enhance the quality of life, nasal appearance, and nasal ventilation function of patients, with high satisfaction and few complications.

"Evaluation of palatal bone regeneration in cleft palate patients following a two-stage palatoplasty using a modified Furlow procedure".

A palatal cleft can be reconstructed using various palatoplasty techniques. Many techniques use local mucoperiosteal flaps to close the hard palate cleft, without closing the underlying bone defect. The purpose of this study was to explore the possibility of spontaneous bone regeneration in the remaining bone defect following a two-stage palatoplasty. Furthermore, the effect of this bone regeneration on transverse maxillary growth was studied. A retrospective study of unilateral cleft lip and palate patients was performed. Cleft size was measured at the hard-soft palate junction on plaster models obtained during palatoplasty. Residual bony cleft was evaluated at the time of alveolar process reconstruction using CBCT images. The presence of crossbites was evaluated through clinical photographs to evaluate transverse maxillary growth. Forty-six patients were included in this study. Thirteen patients (28%) presented with complete ossification of the hard palate at the age of six years. Six patients (13%) had no ossification, while twenty-seven patients (59%) demonstrated partial closure, averaging 75% of the total hard palate length. All patients with complete closure and 89% of patients with partial closure presented without lateral crossbites. Statistical analysis revealed no significant correlation between lateral crossbites and the extent of hard palate ossification (p = 0.4314). 87% of children presented with at least partial ossification of the hard palate after a two-stage palatoplasty, indicating the potential for spontaneous bone regeneration. Importantly, lateral crossbites demonstrated no correlation with palatal ossification (p = 0.1819), suggesting no detrimental impact of regenerated bone on transverse maxillary growth.

Comparing Three-dimensional Radiologic Outcomes Between Early Versus Late Secondary Alveolar Bone Grafting.

Secondary alveolar bone grafting (SABG) during mixed dentition is the standard of care for patients with complete cleft of lip and palate. Early SABG (E-SABG; 4 to 7y) occurs before the eruption of lateral incisors, whereas late SABG (L-SABG; 8 to 12y) occurs before the eruption of maxillary permanent canines. This study compares outcomes of E-SABG versus L-SABG among patients with unilateral cleft of lip and palate (UCLP). A prospective cohort study was conducted evaluating nonsyndromic patients with UCLP who underwent SABG from April 2018 to January 2020, 48 consecutive patients with UCLP were included. Preoperative and 6 to 10-month postoperative cone beam computed tomography imaging were obtained to assess graft and periodontal outcomes. Among 48 patients with UCLP, of which 21 were in the E-SABG group (6.9 ± 1.1y), and 28 were in the L-SABG cohort (10.4 ± 1.6y). The initial alveolar cleft width is significantly smaller in the E-SABG cohort compared with the L-SABG cohort (5.1 ± 1.5 versus 6.5 ± 2.0mm, P = 0.008). Compared with the L-SABG cohort, the E-SABG cohort had higher rates of bony bridge formation (77.3% versus 65.4%, P= 0.367), thicker bony bridges (5.7 ± 2.1 versus 3.9 ± 1.5mm, P= 0.004), lower Bergland scores [1.5 (interquartile range: 1 to 2) versus 2.25 (interquartile range: 1.5 to 3.5), P= 0.026], and greater alveolar bone coverage (79.8 ± 16.7% versus 67.9 ± 18.1%, 0.024). The authors' findings suggest that patients who undergo E-SABG at ∼7 years may have better graft outcomes and benefits to the periodontal bone support on cleft-adjacent incisor compared with L-SABG at 11 years.

Hospital-based Costs to the National Health Service (UK) for Children and Adolescents Born with Cleft from Birth to 20 Years.

The primary aim was to assess the cost (£) to the National Health Service (NHS) of hospital treatment for individuals born with bilateral cleft lip and palate (BCLP), unilateral cleft lip and palate (UCLP), and cleft palate (CP), from birth to 20 years. The secondary aim was to assess the number of scheduled clinical outpatient and inpatient/outpatient surgical visits for this cohort. Retrospective micro-costing analysis. Patients treated within the South West of England Cleft Service (UK). Twenty-three case-notes of children born with cleft (5 BCLP; 10 UCLP; 8 CP) were identified from birth up to and including secondary alveolar bone graft (ABG), and a second group of 23 hospital case-notes (3 BCLP; 10 UCLP; 10 CP) were identified, post-ABG to 20 years. Mean costs from birth to ABG were £17,004 (BCLP), £11,620 (UCLP), and £6137 (CP), and post-ABG to 20 years were £9,463, £7,945, and £3,816, respectively. The largest costs were for staff. Repeat surgery had a significant impact on costs. The mean number of clinical outpatient visits for BCLP, UCLP, and CP were 140, 110 and 83 respectively and 8, 6 and 2 for inpatient/outpatient surgical visits, respectively. Costs for provision of cleft care by the NHS are significant. The greatest costs were incurred with care for patients with BCLP. Patients were expected to attend many appointments, with BCLP experiencing the most visits. Engagement with quality improvement programmes to minimise repeat surgery, and remote consultation for certain appointments, to reduce the patient burden are recommended.

The impact of surgical technique and cleft width on the rate of secondary surgery and velopharyngeal function in children with UCLP at 5 years of age

Several factors may influence speech outcome and the rate of secondary palatal surgery in patients with cleft palate. The aim of this study was to evaluate different types of intra-velar veloplasty within an otherwise uniform surgical protocol. The impact of cleft width and the surgeon’s experience on outcome measurements was examined. This cross-sectional study included 62 individuals with unilateral cleft lip and palate born in 2000–2015. Based on the surgical technique used, they were divided into three groups. The cleft width was measured on dental casts. Blinded speech and language pathologists assessed velopharyngeal function with the composite score for velopharyngeal competence (VPC-Sum) for single words. They rated velopharyngeal function on a three-point scale (VPC-R) in sentences. Target consonants in words were phonetically transcribed. The percentage of correct consonants (PCC) was calculated. Surgical technique was not associated with any outcome. Cleft width was associated with the rate of secondary palatal surgery (OR 1.141, 95% CI 1.021–1.275, p = .020) and velopharyngeal insufficiency when using VPC-R (OR 2.700, 95% CI 1.053–6.919, p = .039) but not when using VPC-Sum (OR 1.985, 95% CI.845–4.662, p = .116). PCC was not associated with cleft width and did not differ between surgical techniques. Radical muscle dissection did not exhibit superiority over intra-velar veloplasty reinforced by the palatopharyngeal muscle. Follow-ups at later ages with larger groups will be necessary to evaluate and compare surgical techniques accurately. Cleft width had a greater impact on the rate of secondary surgery and velopharyngeal function than surgical technique, but neither affected the PCC.

Nasoalveolar Molding in Lately Presented Moderate to Severe Unilateral Cleft Lip and Palate Infants: Does it Add?

Alignment of the alveolar segments with early nasal cartilage tackling is the foundation upon which excellent surgical results are dependent. The purpose is to evaluate the short-term effect of triple combination of passive alveolar molding with early nasal molding augmented by controlled corrective power of lip tapping in lately presented moderate to severe unilateral complete cleft lip and palate infants. A prospective case series study was conducted in Plastic and Maxillofacial Surgery Department, Ain Shams University in collaboration with Orthodontics Department, from January 2021 till June 2023, 15 infants elder than 2 months till 6 months were enrolled in the study. Eight nasal anthropometric measurements ratios through 2-dimension assessment and 4 maxillary arch measurements ratios through 3-dimension assessment were recorded. Extraoral results revealed clinically and statistically decrease of nasal width, alar base width, alar base height ratios, and columellar angle, while increase of nasal height, nasal dome height, columellar length, and alar projection length ratios. Intraoral results revealed clinically and statistically decrease in cleft width with maintained posterior arch width and intercanine width. In conclusion, this triple combination helped in presurgical lessening the alveolar and nasal deformity of such elder infants in a shorter time in comparison with other conventional methods with lesser number of appointments decreasing burden of care to their families improving their compliance.

CLPr_in_ML: Cleft Lip and Palate Reconstructed Features with Machine Learning

Background: Cleft lip and palate are two of the most common craniofacial congenital malformations in humans. It influences tens of millions of patients worldwide. The hazards of this disease are multifaceted, extending beyond the obvious facial malformation to encompass physiological functions, oral health, psychological well-being, and social aspects. Objective: The primary objective of our study is to demonstrate the importance of imaging in detecting cleft lip and palate. By observing the morphological and structural abnormalities involving the lip and palate through imaging methods, this study aims to establish imaging as the primary diagnostic approach for this disease. Methods: In this work, we proposed a novel model to analyze unilateral complete cleft lip and palate after velopharyngeal closure and non-left lip and palate patients from the Department of Stomatology of Xuzhou First People's Hospital, Conical Beam CT (CBCT) images in silicon. In order to demonstrate the generalization, the simulated dataset was constructed using the random disturbance factor, which is from the actual dataset. We extracted several raw features from CBCT images in detail. Then, we proposed a novel feature reconstruction method, including six types of reconstructed factors, to reconstruct the existing features. Then, the reconstructed features weretrained with machine learning algorithms. Finally, the testing and independent data model was utilized to analyze the performance of this work. Results: By comparing different operator features, the min operator, max operator, average operator, and all operators can achieve good performances in both the testing set and the independent set. result: none Conclusion: With the different operator features, the majority of classification models, including Gradient Boosting, Hist Gradient Boosting, Multilayer Perceptron, lightGBM, and broadened learning, classification algorithms can get the well-performances in the selected reconstructed feature operators.

Three-Dimensional Changes of Alveolar Ridges and Nasolabial Structures Following a Digital Nasoalveolar Molding Therapy With a Novel Nasal Stent Activation Protocol

Digital orthodontics has been integrated into NasoAlveolar Molding (NAM) therapy to overcome challenges in the conventional NAM method. This study introduced an individualized Digital NAM (iDNAM) and evaluated the changes in the alveolar ridges and nasolabial morphology after iDNAM treatment. Prospective data were collected from 15 infants with complete unilateral cleft lip and palate who underwent iDNAM therapy. An intraoral-and-nasolabial scan was used to create a virtual setup model and plate generation. A total of 2 plates were required under the iDNAM treatment protocol. The first iDNAM plate has a specific interior and exterior design to allow continuous force application with minimal plate adjustment. After an intermediate scan, a nasal stent was meticulously incorporated into the second plate for nasal molding. To activate the nasal stent, a silicone molding extension was used instead of manually adding acrylic. The alveolar cleft gap was significantly reduced by 7.48 ± 2.06 mm. On the cleft side, statistically significant increases occurred in nostril height, columellar length, and nasal base–columellar angle (2.08 ± 0.63 mm, 2.58 ± 0.28 mm, and 22.29 ± 0.88 degrees, respectively). By using 2 serial plates, iDNAM improved the alveolar cleft gap and the nasal morphology in complete unilateral cleft lip and palate. An addition of a nasal extension to the second iDNAM plate presents a challenge as accurate positioning is required for appropriate activation force. The iDNAM plate design and nasal activation protocol reduce the need for chairside adjustment and the number of appointments.

Canine pillar bone bearing traction method of skull external fixator combined with nickel-titanium memory alloy spring for unilateral cleft lip and palate with severe facial skeletal hypoplasia

Background: For unilateral cleft lip and palate severe midfacial skeletal dysplasia, external skull fixator combined with nickel titanium memory alloy spring was used to treat canine pillar bone bearing traction. Methodology: Patients (n = 200) with unilateral cleft lip and palate and severe midfacial skeletal hypoplasia who were treated in our hospital within three years were divided into control group (treated with trans suture traction osteogenesis) while the observation group was treated with skull external fixator combined with nickel titanium memory alloy spring supporting force traction of canine bone. Results: After applying significantly different traction forces to the maxillary tissues on both sides of the patient, the patient was treated with appropriate traction correction, orthodontic treatment and moderate traction on the facial arch to effectively reduce the recurrence of the disease after surgery. Compared with the control group, the curative effect in all aspects was better and the asymmetry rate was lower. Conclusion: Canine strut bone traction method of external skull fixation combined with nickel-titanium memory alloy spring was applied for severe facial skeletal dysplasia caused by unilateral cleft lip and palate. For this purpose, reasonable and scientific treatment methods were provided for early correction and treatment of the disease. Keywords: External fixator of skull; nickel titanium memory alloy spring; bone bearing traction of canine pillar; unilateral cleft lip and palate; severe midfacial skeletal dysplasia; clinical research.

Do Tunisian children with unilateral cleft lip and palate differ from normal individuals in dental maturity? A pilot study.

Cleft lip and palate (CLP) is the most common congenital malformation of the head and neck. Children with CLP often exhibit dental anomalies. To evaluate the dental age (DA) of unilateral CLP in Tunisian children. This was a cross-sectional study carried out in the department of pediatric dentistry at the University Hospital La Rabta, Tunis. Patients aged between 5 and 14 years, with no other congenital anomalies or syndromes in the craniofacial region other than CLP, were included. The patients' chronological ages were first calculated in years and months. DA was assessed in panoramic radiographs using Demirjian's method. The score of each stage is allocated, and the sum of the scores provides an evaluation of the subject's dental maturity. Fifty-three patients were included in the present study. No difference was observed between the two groups regarding the dental age. A strong and positive correlation between the DA and the chronological age in the two groups was observed (r=0.826). Estimated regression showed that chronological age alone explained 57,4% (r2=0.574) of the dental age variation in the study group and 64.5% (r2=0.645) in the control group. For dental management, CLP children should have the same approach in orthodontics and pediatric dentistry as individuals without clefts, with a focus on the individualization of diagnosis and treatment planning.

Biodegradable Polycaprolactone Bone Scaffold for Rhinoplasty in Bilateral Cleft Repair: A Case Report

Cleft nasal deformities are commonly observed in patients with unilateral or bilateral cleft lip, presenting various degrees of severity. Correcting nasal deformities, particularly in bilateral cleft lip patients, remains a complex challenge due to underlying anatomical abnormalities and the scarring from previous surgeries. This research aims to evaluate the effectiveness of secondary cleft rhinoplasty, focusing on addressing the hypoplastic and depressed bony structures critical to nasal projection. In many cases, autologous grafts, such as cartilage from the septum, ear, or rib, are traditionally used for nasal reconstruction. However, these materials present challenges, including donor site morbidity and tissue resorption. In this study, we explore the use of Osteopore™, a biodegradable polycaprolactone scaffold, as a bone substitute for nasal reconstruction. The results indicate that Osteopore™ offers a promising alternative with reduced morbidity and stable long-term outcomes. This method provides new insights into the materials and techniques for addressing cleft nasal deformities in bilateral cleft lip patients, potentially improving both aesthetic and functional outcomes.

Three-dimensional Analysis of Presurgical Nasoalveolar Molding Outcomes in Patients with Unilateral Cleft Lip and Palate: A Preliminary Study Using LED Surface Scanning Technology.

ObjectivesPresurgical infant orthopedic appliances, such as presurgical nasoalveolar molding (PNAM) devices, are used to attain optimal conditions for primary repair of the lip and nose (PRoLN) in patients with cleft lip. We aimed to analyze the three-dimensional (3D) outcomes of PNAM using an LED surface scanner. MethodsFifteen patients with unilateral cleft lip and palate (CLP) were included in this study and treated using a PNAM device. The patients’ faces were digitized pre- and post-PNAM using an Artec Space Spider scanner, and the scanned data were analyzed using 3D software (Geomagic Control X and ANSYS SpaceClaim). The columellar angle (CA), nostril curvature (NC) on the affected (NC_A) and unaffected (NC_U) sides, gap of cleft lip (GCL), alar width (AW), and nasal tip angle (NTA) were measured. ResultsCA increased significantly by 10.00° and NC_A by 0.030 mm-1 (p<0.001). GCL decreased by 4.98 mm2 on average and NC_U by 0.015 mm-1 (p=0.029 and 0.046, respectively). AW also decreased by approximately 1.22 mm pre- and post-treatment (p=0.002), and NTA, which shows a lateral profile, decreased by approximately 3.32° (p=0.002). ConclusionsThis study confirmed the orthopedic benefits of PNAMd treatment through 3D analysis using an LED surface scanner. Further studies involving a larger number of participants are warranted to study the effects of PNAM and analyze longitudinal changes in patients with CLP. Clinical SignificanceThis study shows that PNAM effectively corrects columellar deviation and nostril shape in patients with unilateral cleft lip, with 3D scanners enhancing primary lip and nose repair outcomes.