Integrated geophysical methods of Electrical resistivity tomography (ERT), Induced Polarization (IP), and Well Logging were employed in this study to delineate the lateral and depth extent of saline water intrusion in Oniru area of Lagos State, South-western Nigeria due to reported saltwater contamination of some wells at relatively shallow depths. Ergo, improving the scientific understanding of fresh and saline waters occurrence in the coastal areas of Lagos State.Five traverses, each of variant lengths (100 to 200 m) were established for both ERT and IP as space permitted. For each profile level, Wenner electrode configuration was adopted with a minimum electrode spacing of 3 m and maximum electrode spacing of 50 m. Ten levels were achieved for profiles 1, 2, 4, and 5 while eight levels were accomplished for profile 3. The ERT and IP data were processed using RES2DINV 2-D resistivity data processing software. The well log data utilized were acquired from two existing lithological logs within the study area to validate the results of the ERT and IP.The unconsolidated sandy formation was characterized by high resistivity with corresponding low to medium chargeability while the clay units were characterized by low resistivity with equivalent high chargeability. The sandy formation saturated by saltwater was characterized by very low resistivity with corresponding low chargeability while that of freshwater was characterized by medium to high resistivity with corresponding low chargeability. The integrated geophysical methods of ERT, IP and borehole logging in the study area identified three lithological sequences. The first layer corresponded to high resistivity values of unconsolidated sandy topsoil, mostly less than 5 m. However, in profiles 3 and 4, it occurred as saturated marshy topsoil. The top layer was underlain by sand/clayey sand formation, which was observed to have pockets of saline water intrusion as evinced from the results of the ERT and IP data. The saline water-bearing zones were observed to intermingle with the freshwater-bearing sand units. The freshwater-saline water transition tends to be conspicuous especially in profiles 3 and 5. The base of profiles 1 and 2 was occupied by clay units which were evident from the results of the borehole log, the ERT, and the IP sections.The integrated geophysical method was able to successfully delineate the fresh and saline water interface and extent of saltwater intrusion within the study area and thus would provide a reliable database for future groundwater development and management within the study area.