Ultra-high Temperature Ceramic Composites Research Articles

Ablation behavior of Cf/ZrC–SiC ultra–high temperature ceramic composites in oxyacetylene torch and plasma wind tunnel

Ablation performance of Cf/ZrC–SiC composites was evaluated in both oxyacetylene torch and plasma wind tunnel and further comparative study was conducted on the ablation behavior under two environments. An oxyacetylene torch test led to a pitting corrosion of Cf/ZrC–SiC composites and their ablated surface was covered by a porous zirconia layer. The Cf/ZrC–SiC nose tip endured the plasma wind tunnel test rather well with only 0.43 % height loss after total 1050 s exposure due to the formation of a compact zirconia scale. This compact zirconia scale kept its consolidation to the composite body and acted as the ablation-resistant and thermal shielding layer of the nose tip.

Fabrication and multiscale heat transfer modeling of high thermal conductivity Cf/HfB2-SiC composites

With the increasing Mach numbers of hypersonic vehicles, extreme aerothermal environments impose substantial challenges on vehicle materials. High thermal conductivity materials facilitate rapid heat redistribution to diminish localized thermal accumulation and reduce material thermal damage, providing a viable route for further enhancing the operational temperature of materials. Here, we successfully fabricate high thermal conductivity Cf/HfB2-SiC composites through the solid–liquid combination process, achieving an x-direction thermal conductivity of 161.11 W/(m·K), which represents an order of magnitude improvement over traditional carbon fiber-reinforced ultra-high temperature ceramic composites. 3D X-ray computed tomography (CT) is employed to analyze the structural composition of the high thermal conductivity Cf/HfB2-SiC composites, and the Gaussian Mixture Model is applied to segment the CT images, thus establishing a mesoscale representative volume element (RVE) model based on CT. Combining theoretical models and finite element analysis, we propose a multiscale heat transfer model for high thermal conductivity Cf/HfB2-SiC composites, which effectively investigates the heat transfer mechanisms of the composites. The fabrication and multiscale heat transfer modeling of high thermal conductivity Cf/HfB2-SiC composites provide a theoretical basis and guidance for enhancing material performance and design optimization.

Development of ultra-high temperature ceramic matrix composites for hypersonic applications via reactive melt infiltration and mechanical testing under high temperature

AbstractIn the ongoing development of hypersonic technologies, material advancements play a key role in meeting the ever-increasing thermomechanical demands of these applications. Ultra-High Temperature Ceramic Matrix Composites (UHTCMCs) offer a promising solution for components operating under such extreme conditions. Their outstanding thermomechanical properties, including high temperature and thermal shock resistance, excellent thermal conductivity and mechanical strength, position them as ideal candidates for applications in fields like leading edges or inlet ramps for ramjets and scramjets. Due to their remarkable material composition, UHTCMCs are capable of operating in temperature regimes that surpass 1700 °C during their operation times under oxidizing atmospheres. At the German Aerospace Center (DLR), a UHTCMC material based on carbon fibres and a zirconium diboride matrix is being developed utilizing Reactive Melt Infiltration (RMI). With RMI, the orientation of the reinforcement fibres can be tailored, to enable the material to fulfill the demanding load requirements. The reactive melt infiltration process comprises three stages: preform fabrication, pyrolysis, and the actual melt infiltration. The foundation for important material properties of the final ceramic, including the matrix composition, is established in the preform production, which is a crucial step in the process. A boron- and zirconium diboride-based slurry is infiltrated into pitch-based carbon fibre fabric. Subsequently, the preforms are consolidated, pyrolysed, and infiltrated with molten Zr2Cu to obtain the UHTC matrix by in situ reaction with the preform elements. Scanning Electron Microscopy (SEM) and Energy-dispersive X-Ray Spectroscopy (EDX) enable the examination of the microstructural features, including the arrangement and distribution of zirconium diboride within the matrix. Mechanical evaluation of the UHTCMCs is conducted via 3-point bending tests at both room temperature and at elevated temperature at 900 °C. It has been demonstrated that Ultra-High Temperature Ceramic Matrix Composites can be produced by means of reactive melt infiltration, and that they retain their strength even at elevated temperatures.

Effect of increased intra-bundle spacing on mechanical behaviour of Cf- ZrB2–SiC ultra-high temperature ceramic matrix composites produced by slurry infiltration and hot pressing

A study has been carried out to examine the influence of augmented intra-bundle spacing achieved through innovative pre-treatment (heat treatment or ultrasonication) of carbon fibre (Cf) fabric, on mechanical properties of Cf-ZrB2-SiC composites processed by ZrB2–SiC slurry infiltration and hot pressing. Significantly enhanced Cf fabric intra-bundle spacing has facilitated homogeneous slurry infiltration, but has lowered elastic modulus, flexural strength, and fracture toughness compared to the composite with as-received Cf, because of fibre disorientation introduced during pre-treatment and its partial degradation by formation of interfacial ZrC during sintering. Notably, the composite with heat-treated Cf has shown superior fracture toughness (7.78 ± 0.4 MPa√m) and work of fracture (3043.25 ± 24.2 J/m2) compared to that containing ultra-sonicated Cf by 52.5 % and 95.7 %, respectively. Despite these variations, all the composites have exhibited non-catastrophic fracture behaviour during testing owing to the role of fibre pull-out, crack bridging, and crack deflection operating as toughening mechanisms.

Microstructural evolution in a one-directional phase transforming ultrahigh temperature ceramic laminate composite

A metal-ceramic multilayer composite composed of Zr and ZrC films was magnetron sputter deposited and annealed at 1325 °C to demonstrate its ability to phase transform into a single phase, substoichiometric ultrahigh temperature ceramic carbide. The pre-annealed laminate microstructure comprised columnar grains for both the Zr and ZrC layers, common to thin film deposition. Upon annealing, the diffusion of carbon facilitated the precipitation of multiple equiaxed carbide grains that consumed the former Zr layers. As this carbon diffused from ZrC, it resulted in the carbide undergoing a lattice contraction where the elastic strains facilitated a decohesion between the carbide grain boundaries. This decohesion is shown to be mitigated by increasing the ratio of the initial ZrC layer-to-Zr layer thicknesses. Finally, oxygen, found to be a minor impurity in the ethylene hydrocarbon gas used to reactively deposit ZrC, facilitated irregular zirconia precipitation within the evolving microstructure during the anneal.

Radio frequency‐assisted zirconium carbide matrix deposition for continuous fiber‐reinforced ultra high temperature ceramic matrix composites

AbstractZirconium carbide (ZrC) is considered to be a potential candidate for ultra high temperature applications due to its high melting point, good chemical inertness, and ablation resistance, but the monolithic form suffers from low fracture toughness and hence poor thermal shock resistance. Reinforcing it using continuous carbon fibers (Cf) to create an ultra high temperature ceramic matrix composite is an obvious solution, however densifying ZrC requires the use of very high temperatures combined with significant pressure, such as obtained by using hot pressing or spark plasma sintering, which risks damaging fibers. In the present work, radio frequency‐assisted chemical vapor infiltration (RF‐CVI) has been investigated with a view to forming Cf/ZrC composites. These initial experiments revealed the ability to deposit pure, nano‐grained, and near stoichiometric ZrC with deposition occurring preferentially from the center of the sample due to the nature of the inverse temperature profile developed. The deposited ZrC grains were in the range of 4–9 nm in size and had a lattice parameter of 0.4750 nm. The work also showed that the use of RF‐CVI enabled the minimization of early pore sealing, a common problem for conventional CVI.

Processing and performance of ultra high temperature ceramic matrix composite (UHTCMCs) using radio frequency assisted chemical vapour infiltration (RF-CVI)

Ultra-high temperature ceramic matrix composites (UHTCMCs) have been produced using a radio frequency assisted chemical vapour infiltration (RF-CVI) process. The composites were based on 2.5D carbon fibre preforms with a 0 / 90° (out of plane) fibre orientation and containing 23 % fibre volume fraction. These were initially impregnated with zirconium diboride (ZrB2) powder in the form of a slurry and then, after solvent removal, the majority of the porosity filled with pyrolytic carbon (PyC) using the RF-CVI process at 1273 K and 0.5 kPa chamber pressure. The latter resulted in a uniform rough laminar texture with good interfacial bonding. As intended, an inverse temperature profile was achieved using the RF heating, enabling uniform densification of the preform from the inside out, with no entrapped porosity and achieving 90 % of theoretical density in only 24 h, at least a tenfold reduction in processing time compared to the conventional CVI process and a fivefold reduction compared to other modified CVI processes such as forced flow or pressure gradient CVI. The resulting UHTCMCs displayed good mechanical strength and thermo-ablative behaviour.

Phase stability of W-containing high-entropy carbide with silicon addition at high temperatures

Reactive melt infiltration (RMI) is a typical method to produce carbon fiber-reinforced ultra-high temperature ceramic matrix composites (Cf/UHTCs), for which the molten Si is a very general and practical infiltrator. High-entropy carbide (HE-carbide) is a newly developed promising matrix phase of Cf/UHTCs. Understanding the phase equilibrium relation in the HE-carbide and Si reaction system can provide accurate guidance on designing the RMI process for preparing HE-carbide matrix composites with controlled phases and microstructure. This study systematically investigates W-containing HE-carbide and Si addition reactions at high temperatures. Samples with nominal starting compositions of (Ti0.2Zr0.2Hf0.2Ta0.2W0.2)C-xSi (HEC-xSi, x = 2.5, 5 and 10 wt%) are prepared by spark plasma sintering technique at 1500 °C and 1700 °C with an axial pressure of 40 MPa for 10 min. The results show that adding 2.5 wt% or 5 wt% Si removes carbon from the HEC matrix, forming SiC and stable equimolar (Ti0.2Zr0.2Hf0.2Ta0.2W0.2)C1-x phase with carbon deficiency at high temperatures. In contrast, besides the SiC phase, the addition of 10 wt% Si in the HEC matrix may form unstable transient phases of (Ti0.2Zr0.2Hf0.2Ta0.2W0.2)C1-x with supersaturated carbon deficiencies at high temperatures, which finally decomposes into non-equimolar HE-carbide (Ti0.2Zr0.2Hf0.2Ta0.2W0.2-y)C1-z and metal silicide WSi2 phases. The effects of the HEC and Si reactions on the microstructure evolution of the samples during sintering are discussed. Meanwhile, the mechanical properties of the samples with the reaction resulting microstructure are measured and briefly discussed.

Analysis and regularity of ablation resistance performance of ultra-high temperature ceramic matrix composites using data-driven strategy

High costs and time consuming associated with experimental trial-and-error result in low efficiency, creating an urgent need for a more effective strategy for ultra-high temperature ceramic matrix composites (UHTCMCs) development. Inspired by the exceptional performance of machine learning (ML) algorithms across various domains, this work employs ML algorithms to construct models and conduct in-depth analysis of the key factors and their patterns influencing the ablation resistance of UHTCMCs. A set of 26 dimensional features that could potentially impact the ablation resistance of UHTCMCs were established based on domain knowledge. Eight typical ML models were used to build and predict the linear ablation rate (LAR) of UHTCMCs. Results show that the random forest model has optimal generalization performance, with mean absolute error (MAE), mean squared error (MSE), and coefficient of determination (R2) being 2.75 μm s−1 and 7.3 (μm s−1)2, and 0.71 respectively. The Shapley additive explanations values based on the random forest model reveal that the key features affecting the LAR of UHTCMCs are ranked as average melting point of ceramics (AMPC) > thermal conductivity of material (TCM) > thermal expansion coefficient of oxides (TECO) > fabrication temperature of material (FTM), all showing a negative influence on the LAR. Symbolic regression further indicates that AMPC, TCM, and TECO have an exponential negative correlation with LAR. These data-driven conclusions have been thoroughly validated through the use of Cf/(TiZrHfNbTa)C composites. The established model can accelerate the discovery of material knowledge and provide reliable guidance for UHTCMC development.

Electromagnetic wave-absorbing of polymer derived rod-like ZrB2 ultrahigh-temperature ceramic composites

Ultra-high temperature ceramics (UHTCs) are candidates that can be used in extremely high temperature environments relative to the Si-based ceramic due to their excellent high-temperature performance. However, there are few researches on the electromagnetic wave absorption of the UHTCs themselves. In this work, rod-like ZrB2 and its composites were prepared by polymer derived method at a lower temperature. The phase composition and electromagnetic wave absorption properties of the ceramics at different pyrolyzed temperatures were analyzed. The rod-like ZrB2 pyrolyzed at 1500 °C shows a RLmin of −54.77 dB at a thickness of 4.7 mm. The rod-like ZrB2/SiC has an absorption bandwidth of 5.68 GHz (RL <-10 dB, 7.6–13.28 GHz) at a thickness of 4.25 mm, exceeding the X-band. An absorption bandwidth of 2.24 GHz for RL <-20 dB (99% absorbed) was obtained by the fabricated composites. The strong absorption of rod-like ZrB2/SiC composites is due to the strong conductive loss and multiple scattering of electromagnetic wave by the rod-like network structure. The formation of core-shell ZrB2/SiC increases the polarization and enhance the electromagnetic wave absorbing properties of the ceramics. The results of this study show that the polymer derived UHTCs have the strong ability to absorb electromagnetic wave.

Review on preparation technology of carbide resistant ultra-high temperature ceramic fiber

The rapid development of hyper-sonic vehicles has put forward an urgent demand for ultra-high temperature resistance ceramic fibers ceramic matrix composites. The properties of ultrahigh-temperature ceramic matrix composites made of carbon-based ultra-high temperature resistance ceramic fibers are excellent. Therefore, the preparation processes of several commonly used carbide-resistant ultrahigh-temperature ceramic fibers are described in detail. This review compares the advantages and disadvantages of five common methods (Molten-salt synthesis method, Chemical Vapor Reaction Method, Chemical Vapor Deposited method, Sol-Gel Method &amp; Polymer-Derived method) for preparing ceramic fibers, summarizes the preparation methods that should be used in the face of different preparation requirements, and evaluates the improvement and prospect of each method. Among them, the polymer-derived method, as the most difficult and effective preparation method, has been given great hope by material scientists.

A universal strategy towards the fabrication of ultra-high temperature ceramic matrix composites with outstanding mechanical properties and ablation resistance

Materials with both excellent mechanical properties and good ablation resistance are urgently needed for the applications of thermal protection system in extreme high temperature oxidizing environments. However, owing to the lack of efficient fabrication processes, the existing materials suffer from either insufficient mechanical properties or poor ablation resistance. Herein, we report a novel solid–liquid combination fabrication strategy that successfully achieves the efficient incorporation of ultra-high temperature ceramics into 3D continuous carbon fiber performs as well as rapid densification. The relative density of the green body approaches the cubic close packing of spherical particles. Using Cf/ZrB2–SiC as an example, the as-prepared composite exhibits outstanding mechanical properties with a flexural strength surpasses 600 MPa and an unprecedented work of fracture of 11,851 ± 838 J/m2, which is two orders of magnitude higher than that of the currently reported monolithic ultra-high temperature ceramics. Moreover, the high ZrB2 content endows the composites with excellent ablation resistance and is thus capable of maintaining long-term non-ablative conditions at 2500 °C. The strategy possesses remarkable universality and high design flexibility, providing a time-saving and cost-effective universal strategy for the on-demand design and fabrication of high-performance ceramic, carbon, metal, and polymer matrix composites.

Fabrication and Ablation Properties of SiC Nanowires-Network Modified Carbon/Carbon–Ultrahigh Temperature Ceramics Composites

In order to address the anti-ablation of carbon/carbon (C/C) composites, SiC nanowires (SiCnws) network-modified C/C-ZrB2-ZrC-SiC composites were prepared through the one-step precursor conversion method. With an optimized B-Si-Zr sol-precursor, uniformly dispersed SiCnws and ceramic particles forming an interlocking structure were synchronous in situ grown in the C/C matrix. During ablation, the partially oxidized SiCnws networks with molten SiO2 surface can stabilize the oxide protecting layer and heal the microcracks efficiently in combination with the refractory ZrO2 particles, thus significantly improving the anti-ablation properties of the composites. This study lays the foundation for the high temperature and long-term anti-oxidation and anti-ablation application of C/C composites in the aerospace industry.

Research Progress on Ultra-high Temperature Ceramic Composites

Research Progress on Ultra-high Temperature Ceramic Composites

Advances in processing and ablation properties of carbon fiber reinforced ultra-high temperature ceramic composites

Advances in processing and ablation properties of carbon fiber reinforced ultra-high temperature ceramic composites

3D microstructure characterization of 2D Cf-ZrB2-SiC ultra-high temperature ceramic matrix composites using X-ray microscopy

A study has been carried out to examine the impact of fibre architecture on the infiltration permeability, constituent phase volume fractions, and matrix porosity of the carbon fibre (Cf)-ZrB2-20 vol% SiC ceramic matrix composites prepared through slurry infiltration, followed by hand lay-up and hot pressing. Unidirectional (UD) Cf-fibres in 0/0° and 0/90° orientations, as well as 8H satin woven Cf-fibres, have been utilized as reinforcement in the composites, which were subsequently densified through hot pressing after infiltration. Revelation of the 3D internal structure of the composites by X-ray microscopy has facilitated a thorough qualitative and quantitative evaluation of infiltration. The fraction of matrix (ZrB2 - 20 vol% SiC) present along three orthogonal axes (X, Y and Z) of the scanned composite blocks has been calculated, with Z representing the direction of infiltration. This study has revealed that the composites processed from UD Cf-fibre preform exhibits greater infiltration, because of higher intra-bundle infiltration compared to the 8H woven Cf-fibre, and the accompanying analysis provides insight into the formation mechanisms of matrix porosities.

Engineering Cf /ZrB2 -SiC-Y2 O3 for Thermal Structures of Hypersonic Vehicles with Excellent Long-Term Ultrahigh Temperature Ablation Resistance.

Ultrahigh temperature ceramic matrix composites (UHTCMCs) are critical for the development of high Mach reusable hypersonic vehicles. Although various materials are utilized as the thermal components of hypersonic vehicles, it is still challenging to meet the ultrahigh temperature ablation-resistant and reusability. Herein, the Y2 O3 reinforced Cf /ZrB2 -SiC composites are designed, which demonstrates near-zero damage under long-term ablation at temperatures up to 2500 °C for ten cycles. Notably, the linear ablation rate of the composites (0.33 µms-1 ) is over 24 times better than that of the conventional Cf /C-ZrC at 2500 °C (8.0 µms-1 ). Moreover, the long-term multi-cycle ablation mechanisms of the composites are investigated with the assistance of DFT calculations. Especially, the size effect and the content of the Zr-based crystals in the oxide layer fundamentally affect the stability of the oxide layer and the ablation properties. The ideal component and structure of the oxide layer for multi-cycle ablation condition are put forward, which can be obtained by controlling the Y2 O3 /ZrB2 mole ratio and establishing Y-Si-O - t-Zr0.9 Y0.1 O1.95 core-shell nano structure. This work proposes a new strategy for improving the long-term multi-cycle ablation resistance of UHTCMCs.

From outer space to inside the body: Ultra-high temperature ceramic matrix composites for biomedical applications

Ultra-high temperature ceramic matrix composites (UHTCMCs) are a new class of carbon fiber-reinforced non-brittle ceramics possessing a unique combination of properties (e.g. high fracture toughness, damage tolerance and corrosion resistance), originally developed for use in extreme hot and harsh environments, such as those found in aerospace and industrial applications. Interconnections between very remote fields more and more frequently come across to discover new solutions. In this study, we investigated the compression strength and cytotoxicity of UHTCMCs designed as biomaterials for future applications inside the body. Indeed, despite the advancements in the designing, manufacturing and surface modification, current prostheses are made of metals or alloys with well-known disadvantages. Near-fully dense Cf/ZrB2-SiC composites were manufactured through slurry impregnation followed by spark plasma sintering. A preliminary biological in vitro study demonstrated materials’ lack of cytotoxicity, making them promising candidates for further investigation for biomedical purposes.

Elevated temperature tensile and bending strength of ultra-high temperature ceramic matrix composites obtained by different processes

Elevated temperature tensile and bending strength of ultra-high temperature ceramic matrix composites obtained by different processes

Heterogeneous solid solutioning in carbon nanotube reinforced HfB2-ZrB2-SiC ultra high temperature ceramic composites

Heterogeneous solid solutioning in carbon nanotube reinforced HfB2-ZrB2-SiC ultra high temperature ceramic composites