Ultra-wideband Monopole Antenna Research Articles

Development and investigation of a compact band-notched MIMO antenna attaining wideband isolation for UWB applications

The sequential layout of a portable ultra-wideband (UWB) monopole antenna, transforming into a compact band-notch (3.15–4.3 GHz rejecting the Wi-Max and the C-Band) multiple-input multiple-output (MIMO) antenna is described in this paper. The diversity layout is designed within a compact size of 39 (l) × 18 (W) mm2. Due to the opposite orientation of the two radiators in the diversity configuration and the use of a rectangular parasitic strip near the feed lines, high and wideband isolation (of >20 dB) is attained over the entire UWB spectrum. The proposed layout depicts a stable omnidirectional radiation pattern and a maximal gain of 1.82 dB. The envelope correlation coefficient (ECC) is found to be below 0.18 for the entire UWB spectrum. Empirical verifications in terms of vital diversity parameters and analogy with competing layouts strengthen the candidature of the intended MIMO layout for UWB wireless portable applications.

A Novel FSS Loaded Circular Slot Monopole Antenna for Microwave Breast Imaging Application

Breast cancer continues to be a major contributor to women's global mortality rates, emphasizing the need to explore alternative and supplementary early-stage detection techniques. This study delves into a circular slot monopole ultra-wideband (UWB) antenna equipped with a frequency-selective surface (CSMA-FSS) for early detection microwave imaging applications. To expand the impedance bandwidth of the traditional circular monopole antenna, a circular slit is introduced on a monopole structure. Additionally, a 10 × 10 unit cell FSS structure is integrated into the antenna as a far-field reflecting plane to enhance gain characteristics. The antenna, crafted with dimensions of 50 × 50 × 1.6 mm³ and a 1.6 mm thick FR4 substrate, operates across the ultra-wideband frequency spectrum, spanning from 3.1 GHz to 12 GHz, while consistently maintaining a reflection coefficient (S 11) value of – 10 dB or lower. Notably, the antenna showcases a gain of over 5 dBi across the entire 3.1 GHz to 12 GHz frequency range. The suggested antenna is ideal for microwave imaging applications due to its broad impedance bandwidth, impressive gain, and excellent directivity. Furthermore, it maintains a relatively uniform group delay, with a deviation of ±0.5 ns throughout the UWB band. In the time domain characteristics, the antenna exhibits excellent pulse handling capabilities and strong signal correlation, featuring an S 21 value of less than – 25 dB. The characteristics, observed in both the time and frequency domains, suggest that the proposed antenna holds significant potential for substantially enhancing breast cancer imaging system.

A low-profile ultra-wideband hexagonal-patch antenna for UAV-based applications

ABSTRACT A compact, low-profile, and ultra-wideband antenna is always desirable for airborne Unmanned Aerial Vehicles (UAV) applications. In this paper, an ultra-wideband monopole antenna is presented with the benefit of a compact and low-profile design structure. The antenna design enables efficient communication without interfering with the UAV’s other components. The antenna is designed using a slotted-hexagonal-patch fed from a co-planar microstrip feed. The bow-tie-shaped slot along with a few other rectangular-shaped parasitic slots are loaded in the hexagonal patch for bandwidth enhancement. The coplanar feed with top ground offers minimum interference with the UAV structure. The non-conducting bottom plane allows seamless integration without causing any interference to the antenna. An equivalent circuit model (ECM) of the proposed antenna is also developed. The antenna structure is fabricated and the measured results are validated. A good agreement between the measured and simulated results is observed. The antenna covers an ultra-wideband ranging from 3 GHz to 13.5 GHz with a maximum gain of 4.0dBi. The size of the antenna is 0.24λ0 ×0.29λ0 ×0.01λ0. The developed antenna, therefore, demonstrates that it is a strong contender for ultra-wideband UAV-based applications.

A Compact Dual-polarized Probe-fed UWB Antenna System for Breast Cancer Detection Applications

This article proposes an electrically small, probe-fed Ultra-Wideband (UWB) monopole antenna on a slotted truncated ground plane for breast cancer detection. The physical footprint of the proposed antenna element is 33 mm × 35 mm × 0.5 mm. This element is designed on the low-cost FR4 Epoxy substrate with a thickness of 0.5 mm. The proposed antenna has an electrical size of 0.33λ × 0.35λ × 0.005λ at the lowest frequency of operation; the radiator offers an impedance bandwidth of 8.34 GHz, which implies a fractional bandwidth of 115.5%. A compact dual-polarized antenna topology with two orthogonally placed probe-fed monopole antennas is proposed to achieve polarization diversity. The impedance characteristics of the individual radiating elements are maintained in spite of the electrical proximity of the radiators. The numerically computed and experimentally measured results of dual-polarized electrically small UWB antenna agree quite well. The proposed dual-polarized antenna topology is investigated for its utility in breast cancer detection in simulation.

Mechanical Robustness Enhanced Flexible Antennas Using Ti3C2 MXene and Nanocellulose Composites for Noninvasive Glucose Sensing.

Electromagnetic sensors with flexible antennas as sensing elements have attracted increasing attention in noninvasive continuous glucose monitoring for diabetic patients. The significant radiation performance loss of flexible antennas during mechanical deformation impairs the reliability of glucose monitoring. Here, we present flexible ultrawideband monopole antennas composed of Ti3C2 MXene and cellulose nanofibril (CNF) composite films for continuous glucose monitoring. The flexible MXene/CNF antenna with 20% CNF content can obtain a gain of up to 3.33 dBi and a radiation efficiency of up to 65.40% at a frequency range from 2.3 to 6.0 GHz. Compared with the pure MXene antenna, this antenna offers a comparable radiation performance and a lower performance loss in mechanical bending deformation. Moreover, the MXene/CNF antenna shows a stable response to fetal bovine serum/glucose, with a correlation of >0.9 at the reference glucose levels, and responds sensitively to the variations in blood glucose levels during human trials. The proposed strategy enhancing the mechanical robustness of MXene-based flexible antennas makes metallic two-dimensional nanomaterials more promising in wearable electromagnetic sensors.

A Hybrid QOGWO-GPR Algorithm for Antenna Optimization

Optimization of antenna performance is a non-linear, multi-dimensional and complex issue, which entails a significant investment of time and labor. In this paper, a hybrid algorithm of quasi-opposition grey wolf optimization (QOGWO) and Gaussian process regression (GPR) model is proposed for antenna optimization. The QOGWO is prone to global optimality, high precision for complex problems, and fast convergence rate at the later stage. The GPR model can reduce time cost of antenna samples generation. After being optimized by the proposed approach, a stepped ultrawideband monopole antenna and a dual-band MIMO antenna for WLAN can achieve wider bandwidth and higher gain or isolation at low time cost, compared to other intelligent algorithms and published literatures.

A Dual-notched Ultra-wideband Monopole Antenna Based on Frequency Selective Surface Technology

A Dual-notched Ultra-wideband Monopole Antenna Based on Frequency Selective Surface Technology

A novel compact semicircular defected ground structure ultrawideband monopole antenna integrated with Ku band for breast cancer detection

SummaryA compact and novel ultrawideband (UWB) antenna integrated with Ku band for microwave imaging applications is reported. The reported antenna consists of a novel patch structure along with a tapered feed structure on top of FR‐4 substrate having a compact dimension of 16 × 22 mm2 and novel semicircular defected ground structure (SC‐DGS) etched below the substrate. The proposed antenna covers a wide impedance bandwidth of 15.07 GHz spanning from 3.51 to 18.58 GHz with a fractional bandwidth (FBW) of 136%. The intended antenna performance is analyzed for S11, peak gain, efficiency, and radiation patterns in frequency domain, and group delay, isolation (S21), and linear phase response in time domain. The simulated and measured results of reported antenna are well matched for the usage in practical portable UWB applications. More importantly, the proposed antenna system is simulated for the detection of breast cancer tissue by comparison of S21 results, current densities, and specific absorption rate with and without tumor conditions. These findings show that the radiator and the whole system work well in detecting the breast tumor.

Novel Dual Band Frequency Selective Surface and its Applications on the Gain Improvements of Compact UWB Monopole Antenna

In this work, a highly directional ultra-wideband (UWB) microstrip patch antenna as a single-element is suggested. The proposed antenna’s gain is enhanced with a novel dual-band frequency selective surface (FSS) placed beneath it. The FSS design has a hexagonal structure with meander line inductances and a capacitance-like structure connecting all of the corners to the middle. There is no metallic layer on the other side of the substrate, which shows transmission zeros at 4.95 GHz and 12.7 GHz, and a modified U-shaped monopole antenna is developed. First, the performance characteristics of the antenna and FSS are analyzed from the simulation results, and they are validated experimentally after fabrication, followed by measurement. The compact configuration comprises an antenna loaded with the proposed FSS results S11 less than -10 dB from 3.15 GHz to 22.65 GHz, covering the UWB band together with the X, Ku-band with a bandwidth of 19.5 GHz (151.16% FBW). The antenna’s overall physical dimensions would be 38.8 mm×38.8 mm×25.2 mm (0.407λo×0.407λo×0.265λo), with λo denoting the lowest frequency’s free-space wavelength. The FSS loading results in a 9.9 dBi maximum gain at 10 GHz. The antenna’s small size increases bandwidth, and its high peak gain makes it ideal for use in real-time applications.

A Miniaturized Thin-Film UWB Monopole Antenna Implemented with High-Dk Adhesive

This paper presents the design of a miniaturized polyimide-based antenna for ultra-wideband (UWB) communication. Miniaturization is achieved through the utilization of adhesive material with a high dielectric constant (high-Dk). The goal of this work is to investigate the impact of such material on the antenna performance and to optimize its design for UWB operation. The manufacturing of the antenna using the proposed structure is developed, and the prototype of an antenna for the UWB high band (6–9 GHz) is measured and analyzed. By leveraging the high Dk of the adhesive material, the simulation and measurement results show that the proposed antenna with a high-Dk adhesive film can achieve compact dimensions with good performance in terms of the gain and time domain characteristics. The results of this study show the potential of exhibiting a reduction in the size of the antenna and will contribute to the advancement of miniaturized UWB antenna technology.

On the Experimental Investigation of Bone Fracture Recovery Process Using an Ultra-Wideband Planar Monopole Antenna

In this paper, a noninvasive bone fracture monitoring system is developed using a planar monopole antenna. The proposed antenna provides an ultra-wideband response, and its overall size is 18 × 19 × 0.8 mm3. The proposed ultra-wideband monopole (UWM) antenna has a maximum measured gain of 3.77 dBi, and the maximum SAR value for an input power of 18 dBm is less than 1.6 (W/kg) (1 g). A bovine tibia is experimentally tested using a proposed UWM antenna to monitor the fracture recovery process and then further analysed using principle component and linear regression analysis. In addition, a microcontroller with a wireless communication module is developed to monitor the data in an Android application. The proposed system could be a promising approach for developing a portable, noninvasive monitoring device.

Compact UWB Monopole Antenna with Tunable Dual Band Notched Characteristics for WiMAX and WLAN Applications

The present work shows a planar compact ultra-wideband (UWB) monopole antenna with controllable dualband-notch frequencies at 3.3 GHz for WiMAX and 5 GHz for WLAN. In the proposed antenna, the lower notchband (at a frequency of 3.3 GHz) is made by cutting a thin horizontal strip on top of the radiating patch. The uppernotch band (at a frequency of 5 GHz) is made by putting two narrow parasitic strips in the shape of an “I” oneither side of the radiating patch. The incorporation of three varactor diodes between the radiating patch and three metallic strips provides the flexibility of adjusting the notch frequencies. The notch band tunability between 3.15 GHz and 3.69 GHz and between 4.93 GHz and 5.59 GHz, respectively, is achieved by changing the bias voltageof the varactor diode between 0 V and 30 V. The gain and efficiency characteristics of the designed antenna alsoexhibit band rejection at the respective notch frequencies. The design principle is validated by fabricating andmeasuring a prototype of the proposed dual-band, notched UWB antenna. For three different bias voltages of thevaractor, the simulated and experimental findings are in reasonable agreement. The proposed works demonstratebetter-notch characteristics as compared with other reported works over the UWB range

A novel method for optimization of flat monopole antennas with the help of a universal definition for geometric shapes

In this research, a novel method is proposed optimization of flatted ultra-wideband monopole antennas. In this method, the shape of the antennas is described in general terms. This general description allows the antennas to take all kinds of shapes during the optimization process and finally, an optimal form for an ultra-wideband monopole is obtained. The parameters of this general description are obtained according to the design constraints in a two-stage optimization process (including global and local optimization). The optimization to achieve the acceptable impedance matching in the working band and reduction of the distortion of the radiation waves is to be done. Due to the efficiency of the optimization method, by applying strict-tightening constrictions on the size of the antenna, smaller antennas with the same performance as the best flat monopole antennas are designed. The main optimization program runs in Matlab Software, but the analysis of antennas at each stage of optimization is executed in the CST Microwave Studio Software. For this purpose, with the help of Visual Basic for Applications programming, an automated link is created between the MATLAB Software and CST Microwave Studio Software. The optimization results showed the ability of this method to design very small antennas with desired functional characteristics. The results showed that the return loss for the entire operational spectrum is below − 10 dB. Also, the correlation coefficient of the proposed planar super wideband monopole antenna has different values in different radiation angles.

Characteristic-Mode-Analysis-Based Compact Vase-Shaped Two-Element UWB MIMO Antenna Using a Unique DGS for Wireless Communication

The modern electronic device antenna poses challenges regarding broader bandwidth and isolation due to its multiple features and seamless user experience. A compact vase-shaped two-port ultrawideband (UWB) antenna is presented in this work. A circular monopole antenna is modified by embedding the multiple curved segments onto the radiator and rectangular slotted ground plane to develop impedance matching in the broader bandwidth from 4 to 12.1 GHz. The UWB monopole antenna is recreated horizontally with a separation of less than a quarter wavelength of 0.13 λ (λ computed at 4 GHz) to create a UWB multiple input and multiple output (MIMO) antenna with a geometry of 20 × 29 × 1.6 mm3. The isolation in the UWB MIMO antenna is enhanced by inserting an inverted pendulum-shaped parasitic element on the ground plane. This modified ground plane acts as a decoupling structure and provides isolation below 21 dB across the 5–13.5 GHz operating frequency. The proposed UWB MIMO antenna’s significant modes and their contribution to antenna radiation are analyzed by characteristic mode analysis. Further, the proposed antenna is investigated for MIMO diversity features, and its values are found to be ECC < 0.002, DG ≈ 10 dB, TARC < −10 dB, CCL < 0.3 bps/Hz, and MEG < −3 dB. The proposed antenna’s time domain characteristics in different antenna orientations show a group delay of less than 1 ns and a fidelity factor larger than 0.9.

Ultra Wideband (UWB) Multiple Input and Multiple Output (MIMO) Antenna Design : A Review

Since the Federal Communication Commission (FCC) issued a license for the 3.1 – 10.6 GHz frequency spectrum for unlicensed radio applications, many papers have been published regarding ultrawideband (UWB) antenna design. The issue of UWB antenna design is determining how to create an antenna with a wide bandwidth, capable of rejecting communication systems that coexist with UWB bands, and capable of designing UWB antennas for multiple input multiple output (MIMO) communication system applications. This study examines the design of UWB antennas with monopole and slot types based on evaluations published over the last two decades. The discussion began with UWB and MIMO systems and then moved on to the configuration of monopole and slot UWB antennas. UWB antenna layout with notched bands and the several types of notched bands available. Finally, two port and quad-port MIMO antenna configuration is examined. To further understand UWB antenna design, numerous UWB antenna configurations are simulated. The outcomes of this review can be utilized as preliminary reading material for researchers looking into UWB antennas.

A novel filtering monopole antenna for 5G communications

PurposeThis study aims to design a compact filtering monopole antenna for 5G communication. The design is most suited for various applications within the frequency range of 2.2–3.8 GHz. It offers enhanced bandwidth and reasonable gain with wide-stopband performance.Design/methodology/approachA low-pass filter (LPF) of complementary split ring resonator (CSRR) with short-circuited stub lines is integrated with a compact defected coplanar waveguide fed truncated circular monopole ultrawideband (UWB) antenna. The reference UWB antenna etched on an FR4 substrate was coupled to the designed LPF to transform the UWB antenna into a wideband antenna. The effect of coupling is analyzed based on the real and imaginary responses of the terminal impedance (ZT) curve. Three short-circuited stub lines of asymmetric lengths are added to the CSRR LPF to suppress harmonics, thereby enhancing the stopband performance and impedance matching between the elements. The proposed filtering antenna is fabricated using a photolithography process, and the corresponding results are measured using a network analyzer (N9951A). The radiation parameters of the proposed filtering monopole antenna are tested in the anechoic chamber. The simulated/measured results are compared and are found in agreement with each other.FindingsThe proposed design suppresses 6.5f0 harmonics, resulting in wide stopband performance and increased gain selectivity at the transition edge. A peak suppression of −41 dB and an average suppression of −18 dB were attained throughout the stopband. An operating fractional bandwidth of 54.5%/143% with a peak gain of 3 dBi/5 dBi was obtained. The proposed filtering antenna supports 5G applications such as WiMAX, WLAN, n7, n38 IMT-E, n30 WCS, n40 TDD, n41 TDD, n48 TDD, n78 TDD and n90 TDD.Originality/valueThe proposed design is novel and compact and has a wide application in 5G communication. With the filter, the antenna operates in wideband, and without the filter, it operates in UWB. Besides, it offers enhanced stopband performance with high gain selectivity at the transition edge. Comparatively, a 50% improvement in bandwidth, 52% improvement in size reduction and 33% improvement in harmonic suppression are attained.

A novel circular fractal ring UWB monopole antenna with dual band‐notched characteristics

AbstractThis paper presents a novel circular fractal ring monopole antenna for ultra‐wideband (UWB) hardware with dual band‐notched properties. The proposed antenna consists of four crescent‐shaped nested rings, a tapered feeding line at the front of the dielectric material, and a semicircular ground plane on the backside. In this design, the nested rings are used both as a radiation element and a band rejection element. The proposed antenna has a bandwidth of 9.03 GHz, which works efficiently in the range of 2.63 GHz–11.66 GHz with the dual notched bands of Worldwide Interoperability for Microwave Access (WiMAX) at 3.15 GHz–3.66 GHz and wireless local area network (WLAN) at 4.9 GHz–5.9 GHz, respectively. The antenna has a compact size of 20 mm × 30 mm × 1 mm (0.177 × 0.265 × 0.0084 λ0) and is implemented using a flame‐retardant type 4 (FR4) material. It has a maximum gain of approximately 4 dB in its operating range, and experimental results support the simulation predictions with high accuracy. The findings of this study imply that the designed antenna can be utilized in UWB applications.

A Compact UWB Monopole Antenna with Triple Band Notches

This article presents an ultra-wideband (UWB) monopole antenna with triple band notch characteristics. The proposed antenna consists of an octagonal patch, fed with a 50 Ω line, which occupies a compact size of 40 mm × 29 mm (0.36λ × 0.26λ, λ is computed using 2.7 GHz frequency) and resonances at a relatively low frequency (2.94 GHz). Specifically, an L-shaped stub, an inverted C-shaped slot, and a pair of U-shaped resonating structures are introduced into the design, which allow antenna to generate three band notches at 3.22-3.83 GHz, 4.49-5.05 GHz and 7.49-8.02 GHz, corresponding to WiMAX band, Indian national satellite (INSAT) band, and X-band satellite frequencies, respectively. In the center of the notched band, the antenna has lower efficiency and gain, essentially indicating that the antenna has good interference rejection performance. To evaluate its performance, the proposed antenna has been fabricated and measured, and the relevant functional parameters, such as S-parameters, voltage standing wave ratio (VSWR) and radiation property, have been studied.

Ultra-Wideband Monopole Antenna with Defected Ground for Millimeter-Wave Applications

Ultra-Wideband Monopole Antenna with Defected Ground for Millimeter-Wave Applications

2D Titanium carbide printed flexible ultrawideband monopole antenna for wireless communications

Flexible titanium carbide (Ti3C2) antenna offers a breakthrough in the penetration of information communications for the spread of Internet of Things (IoT) applications. Current configurations are constrained to multi-layer complicated designs due to the limited conformal integration of the dielectric substrate and additive-free Ti3C2 inks. Here, we report the flexible ultrawideband Ti3C2 monopole antenna by combining strategies of interfacial modification and advanced extrusion printing technology. The polydopamine, as molecular glue nano-binder, contributes the tight adhesion interactions between Ti3C2 film and commercial circuit boards for high spatial uniformity and mechanical flexibility. The bandwidth and center frequency of Ti3C2 antenna can be well maintained and the gain differences fluctuate within ±0.2 dBi at the low frequency range after the bent antenna returns to the flat state, which conquers the traditional inelastic Cu antenna. It also achieves the demo instance for the fluent and stable real-time wireless transmission in bending states.