Ultraviolet Radiation Research Articles

Would Rutin be a Feasible Strategy for Environmental-Friendly Photoprotective Samples? A Review from Stability to Skin Permeability and Efficacy in Sunscreen Systems

Rutin, a flavonoid found in various plants, has gained attention for its potential applications in the cosmetic industry due to its antioxidant, anti-inflammatory, and potential photoprotective properties. Our review explored the use of rutin (rutoside, 3-O-rutinoside-quercetin) in cosmetics/dermocosmetics, focusing on its physicochemical properties and stability, cutaneous permeability, and efficacy in sunscreen systems, involving in vitro tests and the current state of clinical trials. Rutin’s ability to scavenge free radicals, prevent peroxidation, and reduce vascular fragility makes this flavonoid a promising ingredient for photoprotection. Studies have shown that rutin can enhance the sun protection factor (SPF) of sunscreen formulations, especially when combined with organic UV filters. The encapsulation of rutin in nanostructures has also been investigated to improve its applicability. Overall, rutin shows potential as a safe and effective ingredient in cosmetics/dermocosmetics, offering protection against the harmful effects of UV radiation and oxidative stress on the skin, as well as being a feasible strategy for developing environmentally friendly multifunctional sunscreens.

Green synthesis of N,S dual heteroatom-doped fluorescent carbon dots (N,S-CDs) and their applications in gentamicin sensing and dual-switch anti-counterfeiting encryption

Herein, we report a facile one-step solvothermal synthesis of nitrogen and sulfur co-doped fluorescent carbon dots (N,S-CDs) using benzoic acid as the carbon source and sulfonamide as the doping agent. The synthesized N,S-CDs exhibit stable photoluminescence with an impressive fluorescence quantum yield of 16.8 %. These N,S-CDs maintain their luminescent properties under various challenging conditions, including high salt concentrations, elevated temperatures, UV radiation exposure, acidic or alkaline environments, long-term storage, and different solvents. Notably, the photoluminescence of N,S-CDs is excitation-wavelength dependent, with emission wavelengths tunable from 470 nm to 585 nm. Furthermore, the N,S-CDs display distinct fluorescent hues in aqueous and ethanolic media, presenting a novel dual-switch anti-counterfeiting ink system. Leveraging the sensitivity of N,S-CDs to gentamicin, we have developed a facile and rapid detection method for this antibiotic, which has been successfully applied to the analysis of authentic milk samples. This research contributes a novel and efficient protocol for the fabrication of high-performance carbon dots, thereby expanding their potential applications in food analysis and anti-counterfeiting technologies.

3D printed UV-sensing optical fiber probes: manufacturing, properties, and performance

UV sensing 3D printed optical fiber hydrogels provide a flexible and precise method of remotely of detecting exposure to UV radiations. The optical fibers were created using digital light processing 3D printing technique with hydrogel composites, including micro-sized photochromic dyes (pink, blue and their combination). When exposed to ultraviolet (UV) radiation, these dyes exhibited specific absorption characteristics, resulting in significant decreases in both reflection and transmittance mode spectra at 560 nm, 620 nm, and 590 nm. Optical fibers of lengths 1, 2, and 3 cm were manufactured in two orientations: vertical and horizontal. Scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction were utilized to characterize the printed fiber probes. The optical performance of the fibers was tested using customized measurement setups. The reflection and transmission of the printed fibers reduced as the length increased due to optical losses. Reflection and transmisson loss of 20–40% can be observed when the length is increased from 1 to 3 cm. The maximum loss in reflection is observed for pink fiber in the presence of UV irradiation. Also, the type of powder used impacted the response and retraction time, whereas the mixed fiber showed the highest response time of 12–20 s under various conditions. The pink dye added fiber probes shows quick response to UV radiation. An increase in the response time is observed with increasing fiber length. The impact of printing orientation on the transmission and reflectance mode operations of optical fibers was assessed. In addition, the stability of the fiber probes are assesed using a green laser having wavelength 532 nm. This work comprehensively examines the optical properties, manufacturing procedures, and sensing capacities of UV-sensitive photochromic optical fiber sensors.

New Insights Concerning Phytophotodermatitis Induced by Phototoxic Plants.

The present review explores the underlying mechanisms of phytophotodermatitis, a non-immunologic skin reaction triggered by certain plants followed by exposure to ultraviolet radiation emitted by sunlight. Recent research has advanced our understanding of the pathophysiology of phytophotodermatitis, highlighting the interaction between plant-derived photosensitizing compounds (e.g., furanocoumarins and psoralens) and ultraviolet light leading to skin damage (e.g., erythema, fluid blisters, edema, and hyperpigmentation), identifying these compounds as key contributors to the phototoxic reactions causing phytophotodermatitis. Progress in understanding the molecular pathways involved in the skin's response to these compounds has opened avenues for identifying potential therapeutic targets suitable for the management and prevention of this condition. The review emphasizes the importance of identifying the most common phototoxic plant families (e.g., Apiaceae, Rutaceae, and Moraceae) and plant species (e.g., Heracleum mantegazzianum, Ruta graveolens, Ficus carica, and Pastinaca sativa), as well as the specific phytochemical compounds responsible for inducing phytophototoxicity (e.g., limes containing furocoumarin have been linked to lime-induced photodermatitis), underscoring the significance of recognizing the dangerous plant sources. Moreover, the most used approaches and tests for accurate diagnosis such as patch testing, Wood's lamp examination, or skin biopsy are presented. Additionally, preventive measures such as adequate clothing (e.g., long-sleeved garments and gloves) and treatment strategies based on the current knowledge of phytophotodermatitis including topical and systemic therapies are discussed. Overall, the review consolidates recent findings in the field, covering a diverse array of phototoxic compounds in plants, the mechanisms by which they trigger skin reactions, and the implications for clinical management. By synthesizing these insights, we provide a comprehensive understanding of phytophotodermatitis, providing valuable information for both healthcare professionals and researchers working to address this condition.

Ultraviolet radiation and systemic lupus erythematosus: combining evidence from mendelian randomization with a time series distributed lag non-liner model

Ultraviolet radiation and systemic lupus erythematosus: combining evidence from mendelian randomization with a time series distributed lag non-liner model

Investigation on the adsorption mechanism of a mixture of seven pharmaceutical compounds on virgin and aged biodegradable microplastics

In this study the adsorption of a mixture of seven pharmaceutical compounds on virgin and aged polylactic acid (PLA) microplastics (MPs) was investigated. PLA MPs were aged under UV radiation and simulated solar light (SSL) creating three types of MPs: i) virgin, ii) UV-aged and iii) SSL-aged PLA-MPs. The different PLA-MPs were characterized with various characterization techniques (FTIR, SEM, TGA) which revealed modifications on the surface of the aged MPs like cracks and pits, creating more adsorption sites. Pseudo-first, pseudo-second and the intraparticle diffusion model were applied to explore the mechanism and the rate limiting step of the adsorption mechanism. Isothermal study was also conducted and revealed better fitting with the Freundlich model indicating a multi-layer coverage on the MPs surface. Aging appears to enhance the adsorption capacity of the target compounds on the PLA-MPs for both types of aged MPs however the UV-aged showed higher uptake. Finally, the effect of other parameters, like the pH or the type of the water matrix were also investigated offering a deeper insight on the adsorption mechanism of the target compounds.

One-class modelling applied to ATR-FTIR spectroscopy for determining document forgeries related to paper aging

One of the great challenges of document analysis is determining document forgeries. The present work proposes a non-destructive approach to discriminate natural and artificially aged papers using infrared spectroscopy and soft independent modeling by class analogy (SIMCA) algorithms. This is of particular interest in cases of document falsifications made by artificial aging, for this study, SIMCA, and Data-Driven SIMCA (DD-SIMCA) classification models were built using naturally aged paper samples, taken from three time periods: 1st period from 1998 to 2003; 2nd period from 2004 to 2009; and 3rd period from 2010 to 2015. Artificially aged samples (exposed to high temperature or UV radiation) were used as test sets. Promising results in detecting document falsifications related to aging were obtained. Samples artificially aged at high temperature were correctly discriminated from the authentic samples (naturally aged) with 100% accuracy. In contrast, the samples under the photodegradation process showed a lower classification performance, with results above 90%.

Fabrication and investigation of thermoluminescence properties of Zn2SiO4/SiO2 nanophosphor with manganese impurity

Considering the widespread use of radioactive materials and ionizing rays in most fields, such as agriculture, medicine, industry, and energy supply, The presence of a dosimeter is necessary to measure the dose of these rays to reduce their damage. The present study involves the synthesis of Zn2SiO4/SiO2:Mn nanophosphors utilizing ZnC4H6O4 powder, NaOH, and SiO2, followed by heating at 950 °C to develop a thermoluminescence dosimeter for potential use in various applications. Structure and morphology of the Zn2SiO4/SiO2:Mn nanophosphor were studied utilizing techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDS). The thermoluminescence (TL) glow curves of the Zn2SiO4/SiO2:Mn nanophosphor were meticulously analyzed under controlled laboratory conditions. Analysis results revealed that the nanophosphor has a remarkable sensitivity towards low doses of ultraviolet rays. The study demonstrated the effectiveness of Zn2SiO4/SiO2:Mn nanophosphor in detecting and measuring ultraviolet radiation.

Assessing the impact of simulated ocean acidification on the photodegradation of selected microplastics

This study investigated the impact of ocean acidification on the photodegradation of three microplastics (MPs): polypropylene (PP), expanded polystyrene (EPS), and ethylene-vinyl acetate (EVA), under accelerated UV radiation at three pH levels (i.e., 8.1, 7.8, and 7.5), simulating marine conditions. The acidification system simulated current and projected future environmental conditions. As expected, an increase in partial pressure of CO2, total inorganic carbon, bicarbonate ion, and CO2 resulted in more acidic pH levels, with the reverse being true for the carbonate ion. Structural changes of MPs were evaluated, revealing that all weathered samples underwent higher degradation rate compared to the virgin samples. The oxidation state and crystallinity of PP and EVA MPs were higher in samples exposed to the lowest pH, whereas no significant increase in the degradation rate of EPS samples was observed. Saltwater acidification in this study contributed to enhance the photo-oxidation of MPs depending on their polymeric composition.

Considering ultraviolet radiation in experimental biology: a neglected pervasive stressor.

Ultraviolet radiation (UVR) is a pervasive factor that has shaped the evolution of life on Earth. Ambient levels of UVR mediate key biological functions but can also cause severe lethal and sublethal effects in a wide range of organisms. Furthermore, UVR is a powerful modulator of the effects of other environmental factors on organismal physiology, such as temperature, disease, toxicology and pH, among others. This is critically important in the context of global change, where understanding the effects of multiple stressors is a key challenge for experimental biologists. Ecological physiologists rarely afford UVR discussion or include UVR in experimental design, even when it is directly relevant to their study system. In this Commentary, we provide a guide for experimental biologists to better understand if, when, and how UVR can be integrated into experimental designs to improve the ecological realism of their experiments.

UV LED ageing of polymers for PV cell encapsulation

Encapsulation polymers in terrestrial solar modules degrade due to ultraviolet radiation from the sun. To assess a polymer’s durability under UV light, accelerated aging tests can be conducted. A new LEDs device allows us to investigate the effects of temperature, irradiation, and UV source spectrum on the photooxidation mechanism and kinetics of two polyethylene-based commercial encapsulants, differentiated by the presence or absence of UV absorbers. The photooxidation rate of the polymer matrix increases as the temperature and irradiance increase between 62 and 82 °C, and 12 and 28 W.m−2, respectively. In the last case, the photooxidation rate is not proportional to the number of photons. Finally, we observed different distributions of degradation products under UVB radiation at 305 nm compared to those under UVA radiation at 365 nm. UVB photons enable Norrish reactions that are not possible with UVA alone. Special care is needed to maintain a balance between UVA and UVB photons to ensure representative durability tests. With a few adjustments to their emission spectrum, UV LED devices appear to be good candidates for accelerated aging of encapsulation polymers.

Photolytic Degradation of Water‐Soluble Organic Carbon in Snowmelts: Changes in Molecular Characteristics, Brown Carbon Chromophores, and Radiative Effects

AbstractWater‐soluble organic carbon (WSOC) deposited in ambient snowpack play key roles in regional carbon cycle and surface energy budget, but the impacts of photo‐induced processes on its optical and chemical properties are poorly understood yet. In this study, melted samples of the seasonal snow collected from northern Xinjiang, northwestern China, were exposed to ultraviolet (UV) radiation to investigate the photolytic transformations of WSOC. Molecular characteristics and chemical composition of WSOC and its brown carbon (BrC) constituents were investigated using high‐performance liquid chromatography interfaced with a photodiode array detector and a high‐resolution mass spectrometer. Upon illumination, formation of nitrogen‐ and sulfur‐containing species with high molecular weight was observed in snow samples influenced by soil‐ and plant‐derived organics. In contrast, the representative sample collected from remote region showed the lowest molecular diversity and photolytic reactivity among all samples, in which no identified BrC chromophores decomposed upon illumination. Approximately 65% of chromophores in urban samples endured UV irradiation. However, most of BrC composed of phenolic/lignin‐derived compounds and flavonoids disappeared in the illuminated samples containing WSOC from soil‐ and plant‐related sources. Effects of the photochemical degradation of WSOC on the potential modulation of snow albedo were estimated. Apparent half‐lives of WSOC estimated as albedo reduction in 300–400 nm indicated 0.1–0.4 atmospheric equivalent days, which are shorter than typical photolysis half‐lives of ambient biomass smoke aerosol. This study provides new insights into the roles of WSOC in snow photochemistry and snow surface energy balance.

Portable Voltammetry: A Rapid and Efficient Technique for Determining UV Filters in Cosmetics: A Comparative Study with HPLC-PDA and HPLC-MS/MS.

This study addresses the widespread use of UV filters (UVFs) in cosmetic and solar products due to the negative effects of UV radiation, particularly in relation to melanoma risk. While these filters offer protection, their extensive application raises concerns about their environmental and health impacts. Organic UVFs, in particular, have been associated with endocrine disruption in aquatic species and coral reef damage. To mitigate these concerns, regulatory limits have been imposed on certain UVFs. Current analytical techniques for UVF determination, such as HPLC-PDA and HPLC-MS/MS, offer high accuracy but are expensive and lack on-site monitoring capabilities. In response, this research aims to develop a rapid and cost-effective method, utilizing voltammetry for organic UVF quantification in complex matrices like sunscreens. Additionally, HPLC-PDA and HPLC-MS/MS are employed for electrochemical methods and device validation. This approach not only addresses the need for efficient UVF analysis but also provides a basis for regulatory compliance and environmental stewardship in the cosmetics industry.

Systematic study of polymer gas sampling bags for offline analysis of exhaled breath

Polymeric bags are a widely applied, simple, and cost-effective method for the storage and offline analysis of gaseous samples. Various materials have been used as sampling bags, all known to contain impurities and differing in their cost, durability, and storage capabilities. Herein, we present a comparative study of several well-known bag materials, Tedlar (PVF), Kynar (PVDF), Teflon (PTFE), and Nalophan (PET), as well as a new material, ethylene vinyl copolymer (EVOH), commonly used for storing food. We investigated the influences of storage conditions, humidity, bag cleaning, and light exposure on volatile organic compound concentration (acetone, acetic acid, isoprene, benzene, limonene, among others) in samples of exhaled human breath stored in bags for up to 48 h. Specifically, we show high losses of short-chain fatty acids (SCFAs) in bags of all materials (for most SCFAs, less than 50% after 8 h of storage). We found that samples in Tedlar, Nalophan, and EVOH bags undergo changes in composition when exposed to UV radiation over a period of 48 h. We report high initial impurity levels in all the bags and their doubling after a period of 48 h. We compare secondary electrospray ionization and proton transfer reaction mass spectrometry in the context of offline analysis after storage in sampling bags. We provide an analytical perspective on the temporal evolution of bag contents by presenting the intensity changes of all significantm/zfeatures. We also present a simple, automated, and cost-effective offline sample introduction system, which enables controlled delivery of collected gaseous samples from polymeric bags into the mass spectrometer. Overall, our findings suggest that sampling bags exhibit high levels of impurities, are sensitive to several environmental factors (e.g. light exposure), and provide low recoveries for some classes of compounds, e.g. SCFAs.

Obtaining Melanin-Synthesizing Strains of Bacillus thuringiensis and their Use for Biological Preparations.

A pivotal objective in crop production and plant protection lies in developing environmentally friendly insecticidal preparations and biostimulants. We employed Bacillus thuringiensis strains with varied insecticidal spectra and engineered melanogenic mutants. We demonstrated a significant increase in insecticidal activity in the isolated mutants. Meanwhile, there was no observable impact of the enhanced synthesis of water-soluble melanin on the nature and abundance of spore and crystal formation. This heightened efficacy can be attributed to the photoprotective qualities of the synthesized pigment, shielding spores and crystals against the detrimental effects of UV radiation and insolation. We demonstrated the high biological activity of water-soluble bacterial melanin through in vivo experiments involving multiple plant species. Our findings indicate that bacterial melanin is a potent phytostimulant. This preparation accelerates and amplifies plant growth and development processes, leading to a substantial increase in crop yield by 20-40%. The simultaneous synthesis of two biologically active substance, melanin and insecticidal toxins, ensures an elevated level of effectiveness in utilizing melaninogenic strains.

Changes in quality attributes of coconut water treated with UV-radiation and nisin during cold storage: Kinetics modelling and shelf-life prediction

Exploring the innovative combination of UV radiation and nisin treatment for enhancing the shelf life and quality of coconut water (CW) offers promising avenues for sustainable beverage processing. This study investigated the effects of UV radiation, nisin, and their combined treatments on the physical and microbiological attributes of coconut water during 20 days of refrigerated storage. The study also aimed to develop mathematical models for tracking changes in coconut water's quality parameters during refrigerated storage and determining its shelf life by integrating quality and microbial metrics. The results revealed that the cold storage period has significant impacts on the physical and microbiological characteristics of coconut water. The combination of UV radiation and nisin resulted in microbiologically stable coconut water, with populations remaining below 106 CFU/mL, for up to 20 days of cold storage. Moreover, a decline in pH over time, particularly in UV and nisin-treated samples, indicated increased acidity by only 15%. Colour analysis showed shifts towards darker and redder hues, accompanied by increases in a*-values. Conversely, b*-values increased in most samples, except for pasteurized coconut water. Additionally, a consistent decrease in antioxidant activity, total phenolic compound, and total flavonoid content was observed in the samples treated with the combination of UV radiation and nisin during storage period, with averages of 50%, 18%, and 20%, respectively. The zero-order model accurately represented most coconut water's properties, exhibiting R2 value of ≥0.85, and the derived reaction rate constants used to predict shelf life. Integration of UV and nisin treatment significantly extended the projected shelf life of coconut water compared to control (untreated CW sample) and individual treatments except thermal treatment, with shelf-life extensions of up to 19.5 days, highlighting the potential of this combination to enhance coconut water's shelf life while maintaining its safety.

Extraction of phenolic compounds from Moringa oleifera Lam. leaves with ultrasonic-assisted deep eutectic solvents.

In this study, deep eutectic solvents (DESs) combined with ultrasound-assisted extraction (UAE) were used to extract bioactive compounds from the leaves of Moringa oleifera Lam. The FT-IR method was used to analyze the structural characteristics of the DESs, and the extraction efficiencies of the DESs for total phenolic content (TPC) and total flavonoid content (TFC) were evaluated. The stability of the extracts under high temperature and UV radiation was assessed, and their antioxidant activity was investigated after undergoing in vitro simulated digestion. The results show that the seven DESs extracted more TPC and TFC than did the 70% ethanol (36.27 ± 1.58 mg GAE/g, 23.09 ± 1.47 mg RT/g), and the extraction process of UAE-DES was optimized by selecting choline chloride: citric acid as the DES solvent, which has the highest extraction of TPC (86.92 ± 1.34 mg GAE/g) and TFC (49.73 ± 0.85 mg RT/g). The stability results indicated that the DES phenolic extracts were less stable when exposed to high temperature and UV radiation, indicating that DES extracts have better bioactivity. Moreover, after in vitro simulated digestion, the DES extract shows a higher DPPH free radical scavenging capacity (12.79 ± 3.88 mmol Trolox/g of DES extracts, 6.99 ± 4.02 mmol Trolox/g of ethanol extracts) and ferric ion reducing antioxidant power (62.61 ± 1.71 mmol Trolox/g of DES extracts, 55.07 ± 1.66 mmol Trolox/g of ethanol extracts) than ethanol extracts. This study confirmed that DESs are a new and environmentally friendly solvent that can be used for the extraction of phenolic compounds.

Automated Standardization of Melanin Bleaching Procedures of Heavily Pigmented Melanocytic Lesions With Low-Concentration Hydrogen Peroxide on an Automated Platform

Melanin is a natural pigment in the human body that is primarily found in the skin and hair. It protects the skin from damage by ultraviolet radiation. Although this pigment plays a crucial role in protecting the human body, it represents a challenge for pathologists to evaluate highly pigmented tissue samples from melanoma or pigmented skin lesions. Abundant melanin may obscure tissue morphology, which makes it very difficult for pathologists to make a differential diagnosis. Melanin pigment is brown-to-black and granular, and its distribution is often uneven in tissues. The presence of these pigments can complicate the analysis of immunohistochemistry (IHC) for 2 reasons. First, they have a direct physical masking effect on antigen-antibody interactions. Second, 3,3-diaminobenzidine, the most commonly used chromogen, has a brown color that is difficult to distinguish from melanin pigment. Therefore, melanin bleaching has become a crucial step in handling pigmented melanocytic lesions. Bleaching techniques aid pathologists in histopathologic examination of melanin-rich tissue. In this study, we integrated melanin bleaching and IHC on an automated IHC platform to set up a rapid and fully automated procedure. Bleaching steps were performed before antigen retrieval. Samples were treated with 1% hydrogen peroxide solution in Tris-HCl buffer (pH 10) at 80°C for 8 minutes, achieving optimal conditions for melanin bleaching while preserving tissue morphology and antigenicity. This rapid, effective, fully automated, and standardized workflow can be applied to routine staining procedures in clinical laboratories, thereby improving the quality of pathological diagnosis.

Dissolved Black Carbon Facilitates the Photodegradation of Microplastics via Molecular Weight-Dependent Generation of Reactive Intermediates.

Photodegradation of microplastics (MPs) induced by sunlight plays a crucial role in determining their transport, fate, and impacts in aquatic environments. Dissolved black carbon (DBC), originating from pyrolyzed carbon, can potentially mediate the photodegradation of MPs owing to its potent photosensitization capacity. This study examined the impact of pyrolyzed wood derived DBC (5 mg C/L) on the photodegradation of polystyrene (PS) MPs in aquatic solutions under UV radiation. It revealed that the photodegradation of PS MPs primarily occurred at the benzene ring rather than the aliphatic segments due to the fast attack of hydroxyl radical (•OH) and singlet oxygen (1O2) on the benzene ring. The photosensitivity of DBC accelerated the degradation of PS MPs, primarily attributed to the increased production of •OH, 1O2, and triplet-excited state DBC (3DBC*). Notably, DBC-mediated photodegradation was related to its molecular weight (MW) and chemical properties. Low MW DBC (<3 kDa) containing more carbonyl groups generated more •OH and 1O2, accelerating the photodegradation of MPs. Nevertheless, higher aromatic phenols in high MW DBC (>30 kDa) scavenged •OH and generated more O2•-, inhibiting the photodegradation of MPs. Overall, this study offered valuable insights into UV-induced photodegradation of MPs and highlighted potential impacts of DBC on the transformation of MPs.

The Unimolecular Decomposition Mechanism of Trimethyl Phosphate.

Trimethyl phosphate (TMP), an organophosphorus compound (OPC), is a promising fire-retardant candidate for lithium-ion battery (LIB) electrolytes to mitigate fire spread. This study aims to understand the mechanism of TMP unimolecular thermal decomposition to support the integration of a TMP chemical kinetic model into a LIB electrolyte surrogate model. Reactive intermediates and products of TMP thermal decomposition were experimentally detected using vacuum ultraviolet (VUV) synchrotron radiation and double imaging photoelectron photoion coincidence (i2PEPICO) spectroscopy. Phosphorus-containing intermediates such as PO, HPO and HPO2 were identified. Sampling effects could successfully be obviated thanks to photoion imaging, which also showed evidence for isomerization reactions upon wall collisions in the ionization chamber. Quantum chemical calculations performed for the unimolecular decomposition of TMP revealed for the first time that isomerization channels via hydrogen and methyl transfer (barrier heights of 65.9 and 72.6 kcal/mol, respectively) are the lowest-energy primary steps of TMP decomposition followed by CH3OH/CH3/CH2O or dimethyl ether (DME) production, respectively. We found an analogous DME production channel in the unimolecular decomposition of dimethyl methylphosphonate (DMMP), another important OPC fire-retardant additive with a similar molecular structure to TMP, which are not included in currently available chemical kinetic models.