Ultra-high Voltage Research Articles

Isolated FeN3 sites anchored hierarchical porous carbon nanoboxes for hydrazine‐assisted rechargeable Zn‐CO2 batteries with ultralow charge voltage

AbstractZn‐CO2 batteries (ZCBs) are promising for CO2 conversion and electric energy release. However, the ZCBs couple the electrochemical CO2 reduction (ECO2R) with the oxygen evolution reaction and competitive hydrogen evolution reaction, which normally causes ultrahigh charge voltage and CO2 conversion efficiency attenuation, thereby resulting in ~90% total power consumption. Herein, isolated FeN3 sites encapsulated in hierarchical porous carbon nanoboxes (Fe‐HPCN, derived from the thermal activation process of ferrocene and polydopamine‐coated cubic ZIF‐8) were proposed for hydrazine‐assisted rechargeable ZCBs based on ECO2R (discharging process: CO2 + 2H+ → CO + H2O) and hydrazine oxidation reaction (HzOR, charging process: N2H4 + 4OH− → N2 + 4H2O + 4e−). The isolated FeN3 endows the HzOR with a lower overpotential and boosts the ECO2R with a 96% CO Faraday efficiency (FECO). Benefitting from the bifunctional ECO2R and HzOR catalytic activities, the homemade hydrazine‐assisted rechargeable ZCBs assembled with the Fe‐HPCN air cathode exhibited an ultralow charge voltage (decreasing by ~1.84 V), excellent CO selectivity (FECO close to 100%), and high 89% energy efficiency. In situ infrared spectroscopy confirmed that Fe‐HPCN can generate rate‐determining *N2 and *CO intermediates during HzOR and ECO2R. This paper proposes FeN3 centers for bifunctional ECO2R/HzOR performance and further presents the pioneering achievements of ECO2R and HzOR for hydrazine‐assisted rechargeable ZCBs.

Mono-pole blocking accident analysis caused by inaccurate measurement of optical CT in ±800 kV UHVDC transmission system under lightning strike

The ultra-high voltage direct current (UHVDC) power transmission systems usually transmit a capacity of 6-8 GW, their stability and reliability are of vital importance to the large power grid. This paper analyses a mono-pole blocking accident caused by the inaccurate measurement of optical current transformer (OCT) when the pole line of Shaanbei-Wuhan ±800 kV UHVDC transmission system was struck by lightning. Combined with electromagnetic transient simulation of the UHVDC transmission system, digital simulation and in-plant testing of the optical CT, a comprehensive understanding of the factors contributing to the accident is achieved. It reveals that optical CT measurement anomalies were significant contributors to the misoperation of protective relays, which led to the mono-pole blocking accident. Based on the simulations of optical CT under high peak currents and high di/dt conditions caused by lightning strike, the importance of proper setting of demodulation algorithm parameters in optical CT to avoid inaccurate measurements is emphasized. Through in-plant testing and steady state current accuracy verification, the reasonableness of demodulation parameters is verified. Simulation results illustrate the challenges in measuring very fast transient current accurately, which are the premise and guarantee of stable operation of UHVDC transmission systems under lightning strike.

Ether-Modified Nonflammable Phosphate Enabling Anion-Rich Electrolyte for High-Voltage Lithium Metal Batteries.

Phosphate-based localized high-concentration electrolytes (LHCE) feature high flame retardant and satisfactory cathodic stability for lithium metal batteries. However, stable cycling of those electrolytes at ultra-high upper cut-off voltages for long-term stability remains challenging. Herein, an ether-modified phosphate, diethyl (2-methoxy ethoxy) methylphosphonate (DMEP), is designed for high-voltage applications. The ether modification enhances the stability of the Li+-DMEP-FSI- coordination structure, promoting the formation of cation-anion aggregates (AGG) dominated solvation structure, which favors the generation of LiF-rich cathode electrolyte interphase layers compared to triethyl phosphate (TEP)-based LHCE. Consequently, cathode degradation, including transition-metal dissolution and electrode cracking, is well-suppressed. The LiNi0.8Co0.1Mn0.1O2 (NCM811)||Li full cells using DMEP-based LHCEs show more than 90.7% capacity retention at an ultrahigh upper cut-off voltage of 4.7 V after 100 cycles. Notably, DMEP-LHCE exhibits enhanced safety than that of TEP-LHCE, suggesting its versatility and potential for next-generation lithium metal batteries.

Water Quality Analysis of a 300 Mvar Large-Scale Dual Internal Water Cooling Synchronous Condenser External Cooling System and Exploration of Optimal Water Treatment Agent Dosage at Different Temperatures

The external cooling water system of a 300 Mvar dual internal water cooling synchronous condenser at a certain ultra-high voltage converter station continued to exhibit significant scaling and corrosion, even with regular addition of scale and corrosion inhibitors. To solve this problem, the external cooling water of the synchronous condenser was sampled and tested periodically, with the main test items including conductivity, pH value, turbidity, hardness, alkalinity, and other water quality parameters directly related to corrosion and scaling. The trends of these parameters over time were also analyzed. The results showed that as the operation time increased, the cooling water became concentrated during multiple circulation cycles, and the various dissolved or suspended substances underwent a certain degree of enrichment. However, the addition of scale and corrosion inhibitors did not dynamically adjust according to the changes in water quality, and there was always an excessive dosage. Thus, using the external cooling water as the experimental sample, static scale inhibition tests and rotating coupon corrosion tests were conducted to evaluate the scale and corrosion inhibition performance of the commercial AS-582 scale and corrosion inhibitor used at this ultra-high voltage converter station under different conditions. Considering the more obvious corrosive tendency of this water sample, the focus was on testing its corrosion inhibition performance. When the dosage was 600 ppm, the scale inhibition effect was optimal, with an inhibition rate of 92.15%. The corrosion inhibition effect of this scale and the corrosion inhibitor were significantly related to water temperature. At 25 °C, when the dosage was 500 ppm, the corrosion inhibition effect was optimal, with an inhibition rate of 86.79%. However, when the temperature increased to 40 °C, the corrosion inhibition effect under each dosage was significantly worse, unable to meet the requirements, and the use of other corrosion inhibitors in combination was necessary. This work will provide a reference for the scientific use of scale and corrosion inhibitors.

Two-Stage Locating and Capacity Optimization Model for the Ultra-High-Voltage DC Receiving End Considering Carbon Emission Trading and Renewable Energy Time-Series Output Reconstruction

With the load center’s continuous expansion and development of the AC power grid’s scale and construction, the recipient grid under the multi-feed DC environment is facing severe challenges of DC commutation failure and bipolar blocking due to the high strength of AC-DC coupling and the low level of system inertia, which brings many complexities and uncertainties to economic scheduling. In addition, the large-scale grid integration of wind power, photovoltaic, and other intermittent energy sources makes the ultra-high-voltage (UHV) DC channel operation state randomized. The deterministic scenario-based timing power simulation is no longer suitable for the current complex and changeable grid operation state. In this paper, we first start with the description and analysis of the uncertainty in renewable energy (RE) sources, such as wind and solar, and reconstruct the time-sequence power model by using the stochastic differential equation model. Then, a carbon emission trading cost (CET) model is constructed based on the CET mechanism, and the two-stage locating and capacity optimization model for the UHV DC receiving end is proposed under the constraint of dispatch safety and stability. Among them, the first stage starts with the objective of maximizing the carrying capacity of the UHV DC receiving end grid; the second stage checks its dynamic safety under the basic and fault modes according to the results of the first stage and corrects the drop point and capacity of the UHV DC line with the objective of achieving safe and stable UHV DC operation at the lowest economic investment. In addition, the two-stage model innovatively proposes UHV DC relative inertia constraints, peak adjustment margin constraints, transient voltage support constraints under commutation failure conditions, and frequency support constraints under a DC blocking state. In addition, to address the problem that the probabilistic constraints of the scheduling model are difficult to solve, the discrete step-size transformation and convolution sequence operation methods are proposed to transform the chance-constrained planning into mixed-integer linear planning for solving. Finally, the proposed model is validated with a UHV DC channel in 2023, and the results confirm the feasibility and effectiveness of the model.

H-BN-assisted-transferred metal contacts to InSe for twodimensional multifunctional electronic devices

Abstract Metal contacts to two-dimensional semiconductors play a crucial role in determining the electrical performance of the electronic devices. However, traditional three-dimensional metal deposition processes will bring damage to two-dimensional semiconductors and cause significant Fermi-level-pinning effects. In this work, we report a hexagonal boron nitride (h-BN)-assisted-transferred method for metal contacts to few-layered InSe for construction of two-dimensional functional electronic devices. Using transferred Pt electrodes as the contact, p-type dominated ambipolar conduction behavior with the hole Schottky barrier height (SBH) approaching 0 meV was observed in field-effect transistors (FETs) based on multilayered InSe. Based on this, using a dual-gate modulating method, multiple types of InSe homojunctions, including p-p, n-n, p-n and n-p junctions, could be constructed. For InSe p-n homojunctions, a current rectification ratio of over 104 and optoelectronic detection capabilities were achieved. Furthermore, a complementary metal-oxide-semiconductor (CMOS) inverter with an ultra-high voltage gain exceeding 60 at VDD = -1 V was constructed. Our h-BN-assistedtransferred metal contact method can be easily extended to other two-dimensional semiconductors for the construction of complementary electronic and optoelectronic devices.

Interference Characteristics of Electromagnetic Transient Overvoltage on Secondary Equipment of UHV Fixed Series Capacitors

This manuscript addresses the issue of electromagnetic radiation interference experienced by secondary equipment in ultra-high voltage (UHV) fixed series capacitors (FSCs) under electromagnetic transient overvoltage conditions, which cannot be easily determined. To tackle this, a simulation and analysis method for the electromagnetic interference characteristics of secondary equipment is proposed. First, a primary system simulation model of UHV FSC is established, including modeling the platform’s multi-conductor system. The electromagnetic transient overvoltage signals between the low-voltage busbar and the high-potential platform are then simulated and analyzed under two conditions: spark gap triggering and disconnector operation. Next, a finite element model of secondary equipment is created to simulate and analyze the electric field distribution of different materials in the area of the measuring box. The shielding effectiveness of the measuring box is calculated using the overvoltage signals at the measuring box location as excitation. This method allows for the simulation of the electric field distribution in the measuring box area for different materials and calculates the shielding efficiency of the measuring box. It effectively simulates the complex electromagnetic environment of secondary equipment, assesses the electromagnetic shielding efficiency of the measuring box, and provides a theoretical basis for analyzing and improving the anti-interference characteristics of the measuring box.

Atomic modulation of FeN4 sites on hollow carbon nanospheres by neighboring Mn atoms for ultra-stable Zn-air batteries

The sluggish oxygen reduction/evolution reaction (ORR/OER) at the oxygen electrode has significantly hindered the development of Zn-air batteries. Modulating single-atom active sites with neighboring atoms is an effective strategy to enhance ORR/OER activity. Herein, an ordered assembly strategy is employed to anchor FeN4 sites onto hollow carbon nanospheres and then Mn atoms are introduced to modulate the FeN4 sites to construct a electrocatalyst (Fe,Mn-HCNS). Theoretical simulations reveal that neighboring Mn atoms induces a negative shift in the d-band center of Fe, thereby optimizing the adsorption–desorption of key oxygenated intermediates and accelerating ORR/OER kinetics. In addition, the introduction of Mn atoms optimizes the energy barrier for Fe dissolution, which inhibits the demetalation of the FeN4 site. The assembled aqueous Zn-air battery demonstrates ultrahigh open-circuit voltage (1.55 V) and outstanding durability (2000 h at 10 mA cm−2). This work provides an insightful prospect for neighboring Mn atoms in enhancing oxygen electrocatalytic activity at FeN4 sites, thereby advancing the development of superior electrocatalysts.

A hybrid triboelectric-piezoelectric-electromagnetic generator with the high output performance for vibration energy harvesting of high-speed railway vehicles

With the rapid development of intelligent high-speed train, people's travel becomes more convenient, time-saving and comfortable. However, the increase in the number of equipped electronic facilities also brings more power consumption. While the ultra-high voltage drive power system cannot directly drive its numerous devices and the vibrational energy of high-speed trains is completely abandoned. Herein, a hybrid triboelectric-piezoelectric-electromagnetic generator (HTG) is proposed to drive the signal and sensing devices of high-speed train by in-situ harvesting the corresponding vibration energy. Compared with commercial polyformaldehyde film, the output power of triboelectric nanogenerator with the polyformaldehyde nanofiber film prepared by electrospinning technology is improved by 130 times. Furthermore, thanks to the high space utilization and output performance, the HTG has achieved a power-density of the order of kW/m3, which is an improvement of 1–3 orders of magnitude compared to previous research work on vibration energy collection. Importantly, the self-powered wireless motion monitoring system based on HTG can realize real-time monitoring and transmission of motion information such as speed, frequency and displacement. This finding not only gives an important way to efficiently harvest vibration energy, but also provides new ideas for the design of more economical, comfortable and intelligent high-speed trains.

Visible-Photo-Assisted Phase Switching of Antiferroelectric-to-Ferroelectric Orders in an I3 --Intercalated 2D Perovskite.

Antiferroelectric (AFE) has emerged as a promising branch of electroactive materials, due to intriguing physical attributes stemming from the electric field-induced antipolar-to-polar phase transformation. However, the requirement of extremely high electric field strength to switch adjacent sublattice polarization poses great challenges for exploiting new molecular AFE system. Although photoirradiation is striking as a noncontact and nondestructive manipulation tool to optimize physical properties, optical control of antiferroelectricity still remains unexplored. Here, by adopting light-sensitive I3 - anion into 2D perovskite family, we design a new I3 --intercalated molecular AFE of (t-ACH)2EA2Pb3I10(I3)0.5 ⋅ ((H3O)(H2O))0.5 (1, t-ACH=trans-4-aminomethyl-1-cyclohexanecarboxylate, EA=ethylammonium). The I3 --intercalating gives an ultra-narrow band gap of 1.65 eV with strong absorption. In term of AFE structure, the anti-parallel alignment of electric dipoles results in a large spontaneous polarization of 4.3 μC/cm2. Strikingly, 1 merely shows AFE behaviour in the dark even under ultrahigh voltage, while the field-induced ferroelectric state can be facilely obtained upon visible illumination. Such unprecedented visible-photo-assisted phase switching ascribes to the incorporation of photoactive I3 - anions that reduces AFE-to-ferroelectric switching barrier. This pioneering work on the photo-assisting transformation of ferroic orders paves a way to develop future photoactive materials with potential applications.

Visible‐Photo‐Assisted Phase Switching of Antiferroelectric‐to‐Ferroelectric Orders in an I3−‐Intercalated 2D Perovskite

AbstractAntiferroelectric (AFE) has emerged as a promising branch of electroactive materials, due to intriguing physical attributes stemming from the electric field‐induced antipolar‐to‐polar phase transformation. However, the requirement of extremely high electric field strength to switch adjacent sublattice polarization poses great challenges for exploiting new molecular AFE system. Although photoirradiation is striking as a noncontact and nondestructive manipulation tool to optimize physical properties, optical control of antiferroelectricity still remains unexplored. Here, by adopting light‐sensitive I3− anion into 2D perovskite family, we design a new I3−‐intercalated molecular AFE of (t‐ACH)2EA2Pb3I10(I3)0.5 ⋅ ((H3O)(H2O))0.5 (1, t‐ACH=trans‐4‐aminomethyl‐1‐cyclohexanecarboxylate, EA=ethylammonium). The I3−‐intercalating gives an ultra‐narrow band gap of 1.65 eV with strong absorption. In term of AFE structure, the anti‐parallel alignment of electric dipoles results in a large spontaneous polarization of 4.3 μC/cm2. Strikingly, 1 merely shows AFE behaviour in the dark even under ultrahigh voltage, while the field‐induced ferroelectric state can be facilely obtained upon visible illumination. Such unprecedented visible‐photo‐assisted phase switching ascribes to the incorporation of photoactive I3− anions that reduces AFE‐to‐ferroelectric switching barrier. This pioneering work on the photo‐assisting transformation of ferroic orders paves a way to develop future photoactive materials with potential applications.

Sublimation and Recrystallization of CsPbBr3 Constructing a Perovskite-Carbon Interface to Facilitate Hole Transfer in Printable All-Inorganic Perovskite Solar Cells.

All-inorganic perovskite solar cells (APSCs) are a promising photovoltaic technology due to their unique physical and optical properties. For printable all-inorganic perovskite solar cells, the key factors limiting their photoelectric conversion performance are the crystallization of perovskite and the hole collection capability at the perovskite-carbon interface. In this study, leveraging the high-temperature tolerance of CsPbBr3 perovskite, the sublimation and recrystallization processes were controlled, significantly improving the crystalline quality of the perovskite and suppressing the generation of the nonphotovoltaic CsPb2Br5 phase. Furthermore, a continuous distribution of high-quality CsPbBr3 crystals was achieved at the interface between the carbon electrode and the zirconium oxide layer, ensuring efficient collection of photogenerated holes. The photoelectric conversion efficiency of the printable mesoscopic all-inorganic perovskite solar cell was increased from 5.04 to 8.34% (with a record value of 10.04%) and achieved an ultrahigh open-circuit voltage of 1.54 V due to the significant improvement in the crystal quality of CsPbBr3. This study proposes a novel strategy to enhance the photovoltaic conversion performance of carbon-based all-inorganic perovskite solar cells by suppressing the presence of nonphotovoltaic phases.

A novel simulation of space charge decay dynamics after removing the voltage in epoxy resin composites

Abstract Epoxy resin serves as a critical insulating component in ultra-high voltage dry direct current bushings. However, the accumulation of space charges within the epoxy resin, a byproduct of charge mobility, poses a significant risk to the reliability and operational safety of bushings. Conventional space charge attenuation models, especially after voltage removal, have limited use in simulations aimed at understanding this phenomenon. This study introduces an improved model integrating the bipolar charge transport mechanism with space charge decay based on the hopping conduction mechanism and Schottky’s theorem, establishes a theoretical framework for predicting the space charge behavior following voltage removal, and conducts a simulation to investigate the decay process within the internal structure of epoxy resin and measure the residual charges after voltage removal using the pulsed electro-acoustic method. The experimental data validate the accuracy of the proposed model and theoretical assumptions. The findings show that the remaining negative charges after voltage removal are not enhanced by the field enhancement; the anodic positive and cathodic positive charges are distributed in two-segment discontinuous traps, whereas the negative charges are distributed in one-segment traps. The model identifies two distinct trapping sites for anodic and cathodic positive charges, and one trapping site for negative charges. After voltage removal, when the field strength exceeded 40 kV mm−1, positive charges exist near the upper and lower electrodes, and negative charges exist near the center of the specimen. The consistency between the simulated predictions and experimental data proves the effectiveness of the proposed model in accurately simulating the space charge decay in epoxy materials after voltage removal.

Study on transient electric shock characteristics between human body and metal clothes hanger on residential platform near UHV AC transmission lines

AbstractWith the development of ultra‐high‐voltage (UHV) and extra‐high‐voltage transmission lines in China, the transmission lines are gradually approaching the residential areas. The phenomenon of induced electric shock caused by electrostatic induction effect can cause dissatisfaction and complaints from nearby residents. In this paper, a full‐size steel‐framed residential test platform was constructed near a 1000‐kV UHV alternating current (AC) transmission line, the transient shock characteristics of human bodies and metal hangers in different scenarios was investigated, then the relationship between transient shock energy and subjective perception of the human body was discussed. In addition, the shielding effect of shielding wires for transient electric shock situations is analyzed. It was found that the worst‐case scenario occurred when the grounded human body came into contact with the insulated metal clothes hanger, even eliciting a noticeable sensation of pain. In addition, increasing metal shielding wire number has a significant effect on weakening induced electric shocks.

Iodide Management and Oriented Crystallization Modulation for High-Performance All-Air Processed Perovskite Solar Cells.

Halide-related defects at the buried interface not only cause nonradiative recombination, but also seriously impair the long-term stability of perovskite solar cells (PSCs). Herein, a bottom-up, all-in-one modification strategy is proposed by introducing a multisite antioxidant ergothioneine (EGT) at the buried interface to manage iodide ions and manipulate crystallization dynamics. The findings demonstrate that EGT not only passivates uncoordinated Sn4+/Pb2+ defects, but also firmly anchors iodide ions and inhibits their oxidation to I2. Additionally, the modification by EGT enhances the oriented crystallization of perovskite, improves the carrier dynamics, and releases residual stresses. Consequently, the optimized all-air processed device (Rb0.02(FA0.95Cs0.05)0.98PbI2.91Br0.03Cl0.06) achieves a remarkable power conversion efficiency (PCE) of 25.13%, which is among the highest values reported for devices fabricated in air, along with ultrahigh open-circuit voltage (VOC) of 1.191V and fill factor (FF) of 84.9%. The optimized device without encapsulation exhibits strong humidity, thermal, and operational stability under ISOS protocol. Specifically, the initial efficiency of the device is retained at 90.12% after 1512 h of thermal ageing at 65°C and 90.14% after 930 h of continuous maximum power point tracking (MPPT) under simulated AM1.5 illumination.

Formulating Electrolytes for 4.6 V Anode-Free Lithium Metal Batteries

High-voltage initial anode-free lithium metal batteries (AFLMBs) promise the maximized energy densities of rechargeable lithium batteries. However, the reversibility of the high-voltage cathode and lithium metal anode is unsatisfactory in sustaining their long lifespan. In this research, a concentrated electrolyte comprising dual salts of LiTFSI and LiDFOB dissolved in mixing solvents of dimethyl carbonate (DMC) and fluoroethylene carbonate (FEC) with a LiNO3 additive was formulated to address this challenge. FEC and LiNO3 regulate the anion-rich solvation structure and help form a LiF, Li3N-rich solid electrolyte interphase (SEI) with a high lithium plating/stripping Coulombic efficiency of 98.3%. LiDFOB preferentially decomposes to effectively suppress the side reaction at the high-voltage operation of the Li-rich Li1.2Mn0.54Ni0.13Co0.13O2 cathode. Moreover, the large irreversible capacity during the initial charge/discharge cycle of the cathode provides supplementary lithium sources for cycle life extension. Owing to these merits, the as-fabricated AFLMBs can operate stably for 80 cycles even at an ultrahigh voltage of 4.6 V. This study sheds new insights on the formulation of advanced electrolytes for highly reversible high-voltage cathodes and lithium metal anodes and could facilitate the practical application of AFLMBs.

Improved ultra voltage gain switched inductor based-Y-Source DC/DC converter with low device stress

ABSTRACT This article proposesanImproved ultra-high voltage gain Switched Inductor-Based Y-Source Converter (SI-YSC) forphotovoltaic (PV) and Fuel Cell (FC) applications. A single switch is employed to generate a high voltage boost at the load, and this topology provides a high voltage conversion ratio, minimal voltage stress on the switch, and continuous input current. The paper comprehensively examines passive components’ steady-state operation, design, and analysis. In addition, in order to comprehend the projected lifespan of the topology in different environments and operating conditions, the converter’s reliability is assessed to determine the mean time to failure of each component. To demonstrate the advantages of the proposed topology, an in-depth comparison is conducted between it and other Y source converters. The circuit design is verified using MATLAB/Simulink and a prototype model for an output power of 100 W. The results of this verification process are then analysed and discussed.

Long-Lifespan 522 Wh kg-1 Lithium Metal Pouch Cell Enabled by Compound Additives Engineering.

Matching high-voltage cathodes with lithium metal anodes represents the most viable technological approach for developing secondary batteries with ultra-high energy density exceeding 500 Wh kg-1. Nevertheless, the instability of electrolyte/electrode interface film and commercial electrolytes with cut-off voltage above 4.3 V is still a major concern. Herein, we present that excellent cycling stability with an ultra-high cut-off voltage of up to 5.0 V can be obtained by using three-component additives containing fluoroethylene carbonate (FEC), hexadecyl trimethylammonium chloride (CTAC), and tri(pentafluorophenyl)borane (TPFPB). Excellent ionic conductivity, robust interfacial films on both electrodes, and long-lasting uniform Li+ regulation ability can be obtained in the modifying electrolyte. Consequently, using a high plating/stripping capacity of 3 mAh cm-2 under the current density of 1 mA cm-2, lithium symmetric cells demonstrate stable cycling performance exceeding 800 hours. Meanwhile, the 7.3 Ah-class Li[NixCoyMn1-x-y]O2 (x=0.83, NCM83)|Li pouch cells are assembled, which show a high energy density of 522 Wh kg-1 and present excellent stability over 178 cycles with a high initial coulombic efficiency (CE) of 98.0 %.

Ultra-high voltage gain achieved with quadratic DC/DC converter design

This work introduces a novel DC/DC converter with an incredibly high voltage gain, specifically designed for renewable energy generating systems. The proposed circuit features a coupled inductor integrated with a quadratic boost circuit and a voltage multiplier cell to achieve a substantial step-up in voltage gain. Ultra-high voltage gain, minimum reverse recovery in diodes, low voltage stress on switching devices, continuous input current, and a shared ground between the input source and output load are some of this topology’s key features. The coupled inductor design reduces power dissipation in magnetic components by distributing the high DC source current with an additional input inductor. Additionally, regenerative clamp circuits alleviate voltage stresses on power switches during simultaneous switching. Theoretical analysis covering the operating principle, steady-state behavior, and efficiency is discussed in detail. An evaluation of the suggested topology’s performance is conducted using a 250-W, 25-V/400-V lab prototype.

Effects of wire rope isolators on seismic life-cycle cost of UHV bypass switch

The seismic isolation devices reduce the seismic vulnerability of the electrical equipment. Accurately assessing the seismic life-cycle cost (SLCC) of the electrical equipment is beneficial in guiding the design and enhancing the seismic resilience of electrical substations and converter stations. To evaluate the effects of the isolator devices on the seismic life-cycle cost of electrical equipment, a SLCC evaluation model was proposed in this study, and the evaluation was conducted on an ultra-high voltage (UHV) bypass switch (BPS) with wire rope isolators (WRI). The model takes into account equipment purchase, maintenance, transportation and installation costs and indirect losses caused by power outages. Afterward, the SLCC and break-even time of the UHV BPS with and without WRIs in different regions were analyzed. The results indicate that beyond the break-even time, the BPS with WRIs becomes more economically viable. Moreover, its economic viability increases as the service life extends. Therefore, in high seismic cost risk areas, it is recommended to adopt seismic isolation devices to ensure the secure and economically efficient operation of electrical equipment.