Buildings sited on soft soils are sometimes subjected to tremors due to earthquakes occurring some 400 to 700 kilometers away as a result of the amplifying effect of soft soils on low-frequency, long-distance waves. This study focuses on the seismic vulnerability of existing reinforced concrete (RC) buildings in Singapore that are designed primarily for gravity loads, and examines the use of externally bonded glass fiber-reinforced polymer (FRP) systems in retrofitting these buildings to resist lateral forces due to seismic action. Two case studies were considered: (1) a four-story frame building, representing typical low-rise buildings; and (2) a 25-story shear wall-frame building, representing typical high-rise buildings. Pushover tests were carried out correspondingly on 1/2-scale sub-frames and 1/5-scale shear walls. The one-and-a-half bay, two-storey frame specimens represent the critical part of the low-rise building while the I-shaped wall specimens represent the lower critical 2.6 stories of the high-rise building. Test results revealed a strong column–weak beam failure mechanism for both the un-retrofitted and retrofitted frames. The retrofitted frame was 30 percent higher in ultimate strength but 12 percent lesser in ultimate drift ratio compared to the un-retrofitted frame. For the wall specimens, sudden failure of the un-retrofitted shear wall was observed at the base of the side walls due to shear. Failure of the retrofitted wall was however more ductile with FRP debonding, followed by concrete crushing and FRP rupture at the compressive base of the side wall. The ultimate load capacity and lateral displacement of the retrofitted wall increased respectively by 45 and 66 percent.