국민 생활수준의 향상으로 안전과 환경에 대한 인식이 고조됨에 따라 조경시설물에 환경 재료의 하나인 목재가 널리 이용되고 있으나, 미송을 사용한 목재 조경시설물은 틀어짐, 균열 등의 하자가 많이 발생하고 있어, 수입목재인 활엽수재(hardwood)를 사용하는 사례가 늘고 있다. 그러나 수입 목재는 고가이며, 실제 하자 발생이 미송에 비해 얼마나 저감되는지에 대한 정보나 실태조사 없이 사용되고 있어, 시공자에게 목재 수종별 특성과 품질 하자 발생 정도에 대한 정보가 매우 필요한 실정이다. 따라서 본 연구는 목재 조경시설물에 사용되는 미송, 부켈라, 니아토, 말라스 목재 4종류를 대상으로 목재의 균열 하자현황을 조사 분석하여 시공자로 하여금 적절하게 목재를 사용할 수 있는 기초자료를 제공하는데 목적을 두었다. 본 연구의 주요 결과를 요약하면 다음과 같다. 첫째, 휴게시설물 목재기둥의 목재 표면적 당 균열 하자는 미송 1.90개소/<TEX>$m^2$</TEX>, 말라스 0.83개소/<TEX>$m^2$</TEX>, 부켈라 0.14개소/<TEX>$m^2$</TEX>, 니아토 0.04개소/<TEX>$m^2$</TEX>로 조사되어 니아토가 가장 적은 것으로 나타났다. 둘째, 목재 종류별 강도와 하자율 비교를 보면 목재의 강도는 말라스가 우수하였으나, 하자율은 니아토가 더 적게 발생한 것으로 보아 목재 강도가 높은 것이 하자가 적게 발생하는 것은 아니라는 것을 알 수 있었다. 셋째, 목재 종류별 단가와 하자율 비교를 보면 미송이 가장 저렴하고 부켈라가 가장 고가로 조사되었으며, 하자처리 비용을 감안할 때 하자가 적게 발생하는 니아토를 사용하는 것이 경제적인 측면에서 유리하다고 판단된다. 본 연구는 목재 조경시설물 설치 시 시공자로 하여금 적절한 목재를 선택할 수 있는 기초자료를 제공한다는데 그 의의가 있으며, 조경시설물의 품질 향상과 하자 저감에 기여할 수 있을 것이다. Improvements in the quality of life have resulted in a heightened awareness of safety and the environment. As a result, timber as an environmentally friendly material, is used for landscape facilities and a wide range of purposes. But there are a large number of defects since there are twists and cracks that can be found in wooden landscape facilities. This has led to the use of imported hardwood instead of the Western Hemlock which has been in widespread use. Hardwood is expensive. However, it is being used without any information or research on how much it reduces the actual defects. Construction contractors are in great need of information on the characteristics and defect rates of different types of timber. This study investigated and analyzed the cracks in four types of timber - namely the Western Hemlock, Burckella, Nyatoh and Malas - in order to provide basic information to construction contractor for them to be able to select and use the appropriate type of timber. The main results of this study are as follows. First, the Western Hemlock had 1.90 <TEX>$cracks/m^2$</TEX>, Malas had 0.83 <TEX>$cracks/m^2$</TEX>, Burckella had 0.14 <TEX>$cracks/m^2$</TEX>, and the Nyatoh had the least number of surface defects at 0.04 <TEX>$cracks/m^2$</TEX>. Second, while Malas has the highest degree of strength timber, Nyatoh had the smallest defect rate. This showed that having high timber strength does not necessarily mean it has less defects. Third, the Western Hemlock was the least expensive and Burckella was the most expensive. However, considering the cost of repairing defects, it would be economically advantageous to use Burckella and Nyatoh which have low defect rates. This study aimed to provide basic information to landscape construction contractors for them to be able to select and use the appropriate type of timber when constructing wooden outdoor rest furniture. The results are expected to contribute to quality enhancements and defect reduction in landscape facilities.