Types Of Diffraction Gratings Research Articles

Fabrication of angle-gradient echelle grating on metallic glass using shaped vibration cutting with time-varying trajectory

In order to solve the problem of narrow band coverage of traditional infrared gratings, a new type of diffraction grating is invented and named as angle-gradient echelle grating. The blaze angle of the grating gradually changes along the direction of the grating grooves, which can be regarded as etching countless sub-gratings with different blaze angles on a grating, breaking the limitation of the number of blaze angles of traditional gratings. In addition, in order to solve the processing problem of angle-gradient echelle grating, a new processing method, shaped vibration cutting (SVC) with a time-varying trajectory is developed. By exploring the influence of different processing parameters on the grating processing results, a suitable processing plan was proposed. Eventually, angle-gradient echelle grating with blaze angles varying from 30° to 55° and surface roughness of as low as 20 nm was fabricated on metallic glass, a material that is difficult to machine.

Simulation of the spatial distribution of scattered light under illumination of a resonant diffraction grating with structured light

In this paper, a comparative theoretical analysis and numerical simulation of the operation of various types of diffraction gratings in the far field is carried out using a Fourier transform. In more detail is discussed the spatial spectrum of binary amplitude gratings, including the diffraction patterns in the far field and in the focal plane and while taking into account variations in the fill-factor. When analyzing characteristics of experimentally created halide perovskite resonant gratings, the influence of the illuminating beam type on the formation of the first three diffraction orders is considered.

Diffraction gratings for spectral devices [Review

Subject of study. This review is intended to acquaint the reader with various types of diffraction gratings and technologies for fabricating them. Method. An information search on the topic, systematization, and analysis are performed. Main results. This paper briefly discusses the areas of application and classification of spectral devices and shows the variety of problems that can be solved by means of spectral devices and that impose various requirements on diffraction gratings. It lists the main characteristics of diffraction gratings used in spectral devices and specifies the stages of their improvement. It discusses classical reflective diffraction gratings—plane (profiled and laminar) and concave. It describes the principles involved in obtaining holographic diffraction gratings and their advantages over ruled ones. It devotes special attention to concave holographic gratings with aberration correction, shows how they are classified, and briefly describes methods of optimizing the parameters of gratings that operate in monochromator systems with simple rotation and flat-field spectrographs with correction of defocusing, astigmatism, and meridional coma, as well as various methods of recording gratings in nonhomocentric beams to expand their correction possibilities. Ruled analogs of holographic gratings are used in a number of cases. It is pointed out that foreign and Russian firms that batch-produce diffraction gratings of the types described here completely satisfy the requirements of the batch-producers of spectral devices. The features of using volume phase gratings in spectral devices are considered, and it is pointed out that, even though these gratings are distinguished by high efficiency, their angular and spectral selectivity have inhibited these gratings from being widely applied in spectral devices. However, there have been active studies in recent years on expanding the regions in which volume phase gratings are used: new system solutions, recording materials, and recording methods have been proposed. Trends to create diffraction elements that combine various functions (cross gratings and grisms) are pointed out. New technologies are proposed for fabricating diffraction gratings: ruled gratings—pendulum-type ruling engines, gratings that reflect with high diffraction efficiency in an expanded wavelength range—“efficiency-achromatization” or double-blaze technologies and volume phase gratings—ultrafast laser inscription and profiled diffraction gratings that operate in the x-ray region—electron-beam lithography, to miniature spectral devices—microelectronic mechanical systems technology used in electronics, composites—concepts of a composite volume phase diffraction grating recorded by integrating several elementary fields. The Conclusion evaluates the modern level and points out development trends. Practical significance. The material presented here can be useful in the development of spectral apparatus.

Modeling of Nonlinear Optical Phenomena in Host-Guest Systems Using Bond Fluctuation Monte Carlo Model: A Review.

We review the results of Monte Carlo studies of chosen nonlinear optical effects in host-guest systems, using methods based on the bond-fluctuation model (BFM) for a polymer matrix. In particular, we simulate the inscription of various types of diffraction gratings in degenerate two wave mixing (DTWM) experiments (surface relief gratings (SRG), gratings in polymers doped with azo-dye molecules and gratings in biopolymers), poling effects (electric field poling of dipolar molecules and all-optical poling) and photomechanical effect. All these processes are characterized in terms of parameters measured in experiments, such as diffraction efficiency, nonlinear susceptibilities, density profiles or loading parameters. Local free volume in the BFM matrix, characterized by probabilistic distributions and correlation functions, displays a complex mosaic-like structure of scale-free clusters, which are thought to be responsible for heterogeneous dynamics of nonlinear optical processes. The photoinduced dynamics of single azopolymer chains, studied in two and three dimensions, displays complex sub-diffusive, diffusive and super-diffusive dynamical regimes. A directly related mathematical model of SRG inscription, based on the continuous time random walk (CTRW) formalism, is formulated and studied. Theoretical part of the review is devoted to the justification of the a priori assumptions made in the BFM modeling of photoinduced motion of the azo-polymer chains.

Diffraction properties of azimuthally symmetric gratings in a hollow circular dielectric waveguide

Diffraction gratings can be used in cavities of terahertz lasers for generating wave beams with special polarization. Adequate using of such gratings needs preliminary theoretical investigation of their diffraction properties. To solve the problem a specially adopted numerical method should be used because the structures under study frequently have many elements (many periods) and well-known theoretical approaches or commercial solvers cannot cope with such task. In this paper, a Finite Difference in Time Method for Body of Revolution (BOR FDTD) is applied to the problem. Updating formulae for electromagnetic field and some calculation features of the method are presented. Different types of diffraction gratings that homogeneously and inhomogeneously change their properties with the radial coordinate are studied. Some physical peculiarities of diffraction modes of a hollow dielectric waveguide with different polarization are revealed and discussed.

Grating-coupled surface plasmon resonance enhanced organic photovoltaic devices induced by Blu-ray disc recordable and Blu-ray disc grating structures.

In this work, we studied the performance enhancement of organic thin-film solar cells (OSCs) originating from the presence of diffraction gratings on the surface of the active layer. Two types of diffraction gratings, periodic gratings (Blu-ray disc recordable: BD-R) and quasi-random gratings (Blu-ray disc: BD), were employed as master templates for grating structures. The grating structures were introduced to the surfaces of poly(3-hexylthiophene) (P3HT):phenyl-C61-butyric acid methyl ester (PCBM) films, which were the active layers of the solar cells. The addition of the grating structures led to an increase of light absorption in the absorption region of P3HT:PCBM induced by light scattering. Furthermore, the grating-coupled surface plasmon resonance generated additional light absorption peaks. With illumination of non-polarized light at a normal incident angle, the short-circuit current densities of the BD-R and BD solar cells improved by 11.05% and 10.6%, respectively. Efficiency improvements of 19.28% and 3.21% were also observed for the BD-R and BD devices, respectively. Finally, the finite-difference time-domain simulation results revealed an enhanced electric field in the P3HT:PCBM layer, especially in the BD-R OSC devices.