Types Of Sludge Research Articles

Sediment management in integrated aquaculture-agriculture systems: Sustainable use of fish culture sludge for organic fertilization of Terminalia arjuna.

Aquaculture systems generate large amounts of sludge that represent serious environmental threats if discharged directly into local ecosystems. However, this nutrient-rich sediment can contribute to nutrient cycling by being applied as an organic fertilizer to ornamental medicinal trees during their early growth stages. To investigate the potential advantages of using recirculating aquaculture system sludge (RASS) and biofloc technology sludge (BFTS) as organic fertilization alternatives to chemical fertilization, a pot trial was conducted at the Faculty of Agriculture, Cairo University, Egypt. The sludge effects on growth, NPK content, and high-performance liquid chromatography (HPLC) quantification of 24 phenolic phytocompounds of Terminalia arjuna seedlings were evaluated. Stimulation of growth and an increase in chemical composition were observed in seedlings supplied with BFTS + ½ NPK, followed by seedlings treated with BFTS, RASS + ½ NPK, RASS, and ½ NPK, as compared to unfertilized seedlings or seedlings supplied with NPK fertilization. Our results demonstrate that both sludge types are effective organic fertilizers for ornamental medicinal tree production and are comparable to or superior to commonly used synthetic fertilizers. The results also indicate that using RASS and BFTS can be considered an environmentally friendly method of organic waste management through nutrient recycling. Furthermore, we propose an integrated farm design for the recovery of both dissolved and solid nutrients that can be a sustainability paradigm in which zero-waste discharge, as well as environmental and economic benefits, can be achieved under the UN Sustainable Development Goals.

Studies on the treatment of anaerobically digested sludge by white-rot fungi: evaluation of the effect of Phanerochaete chrysosporium and Trametes versicolor

BackgroundThe composition of anaerobically digested sludge is inherently complex, enriched with structurally complex organic compounds and nitrogenous constituents, which are refractory to biodegradation. These characteristics limit the subsequent rational utilization of resources from anaerobically digested sludge. White-rot fungi (WRF) have garnered significant research interest due to their exceptional capacity to degrade complex and recalcitrant organic pollutants. However, the exploration of WRF in the context of sludge treatment remains an under-investigated area within the scientific community. The present investigation explores the application of WRF in the treatment of anaerobically digested sludge, offering a novel approach for the valorization of sludge resources.ResultsIn this study, WRF enzymes, manganese peroxidase (MnP) and lignin peroxidase (LiP), exhibited sustained high activities of approximately 102 U/L and 26 U/L, respectively, within the anaerobically digested sludge under a controlled pH of 5.5 within the growth system. These conditions were found to significantly enhance the treatment efficacy of the anaerobic sludge. The removal of soluble chemical oxygen demand (COD) and Total COD by Trametes versicolor powder was better than that of Phanerochaete chrysosporium powder. The treatment of sludge samples with WRF, specifically Phanerochaete chrysosporium powder, resulted in a significant reduction of ultraviolet radiation (UV254). Fourier-transform infrared spectroscopy (FTIR) analysis revealed that the application of Trametes versicolor powder exerted a notably pronounced impact on the functional groups present in sludge samples. Specifically, there was a significant decrease in the peak intensities corresponding to the C-O bonds, indicative of saccharide degradation, alongside an observable increase in the intensities of amide peaks, which is suggestive of protein synthesis enhancement. Microbial community analysis demonstrated that Phanerochaete chrysosporium was the predominant fungal species, exerting a significant regulatory role within the sludge ecosystem.ConclusionIn conclusion, this research furnishes a robust scientific foundation for the utilization of WRF in the treatment of anaerobic digestion sludge. It elucidates the fungi’s capacity to ameliorate the physicochemical attributes and microbial community composition within the sludge. Furthermore, the study offers a certain reference for the subsequent use of WRF in the treatment of other types of sludge.

Assessment of heavy metals distribution and environmental risks in biochar from co-pyrolysis of sewage sludge and mixed municipal waste.

The substantial heavy metal concentrations in sewage sludge (SS) from wastewater treatment pose environmental risks and limit its practical applications. To mitigate this, SS was co-pyrolyzed with mixed municipal waste (MMW), and the heavy metals (HMs) distribution in the resulting biochar and leachate was analyzed through ICP-MS. Ecological risk (Er) and geological accumulation index (Igeo) were evaluated for various blending ratio. Results showed that MMW biochar exhibited high carbon and low sulfur content, indicating potential for carbon sequestration and soil enhancement. Both biochar showed intricate pore structures, with a slight increase in surface area, and greater aromaticity observed with the addition of MMW. Pyrolysis concentrated HMs in SS biochar, but enhanced stability reduced their leachate levels. Adding MMW decrease the level of HMs in biochar and leachate, notably reducing Se leaching from 1.54% to 0.12% and slightly lowering Hg and Cu levels. Co-pyrolysis stabilized Se by combining it with organic matter. Er analysis indicated a reduction in Hg and Cd risks by 86.6 and 41.23, respectively, with cumulative ecological risk (RI) dropping from 339.7 to 175.7. Higher MMW ratios reduced Igeo values for Zn, Cd, and Cu, shifting risks from strong to moderate and improving biochar’s agricultural suitability. High Cu and Zn levels in SS, originating from zinc and copper pipes in water treatment, were mitigated by MMW blending. Hence, the optimal co-pyrolysis ratio for HMs immobilization and SS disposal is 50% MMW. These results emphasize the importance of co-pyrolysis to produce safe biochar with reduced ecological risks. However, further research is required to optimize co-pyrolysis for various sludge types at higher pyrolysis temperatures (beyond 400℃) with the application of acid leaching agents.

Thermal treatment of sewage sludge: Impact of the sludge type and origin on the formation of recalcitrant compounds

In a municipal wastewater treatment plant, the thermal treatment of sludge can be an efficient way of increasing the final sludge cake dryness and boosting anaerobic digestion performances. However, such treatments generate refractory compounds which, once returned to headworks, can affect the quality compliance of effluent discharges, particularly concerning organic nitrogen. This study explores the effects of thermal hydrolysis (TH) and hydrothermal carbonization (HTC) of municipal sludge on the refractory organic compound production. A novel approach using ultra-performance liquid chromatography with size-exclusion chromatography and UV/fluorescence detection (UPLC-SEC-UV/Fluo) was employed to characterise recalcitrant dissolved organic matter (rDOM), which typically consists of Maillard reaction products (MRP). Specifically, UPLC-SEC-UV/Fluo was combined with principal component analysis (PCA) to enable a more thorough examination of the chemical diversity of MRPs produced. Greater temperatures during the thermal treatment step lead to increased production of rDOM and rDON. Protein-rich sludge with a great AS:PS ratio yields the greatest rDOM levels. MRP characteristics, such as molecular weight distribution and aromaticity, are primarily influenced by temperature and plant origin. UPLC-SEC-UV/Fluo provides information on the structures of MRPs useful to optimize the thermal treatment process and in understanding their fate in subsequent processes (chemical oxidation, biodegradation).These insights have practical implications for sludge treatment processes, including optimizing TH and HTC conditions to control rDOM production and adapt the sludge treatment line of a water resource recovery facility.

The synergistic role of sludge conditioner FeCl3/Rice husk on co-combustion with coal gangue: Thermaldynamic behavior, gases pollutants control and bottom ash stabilization

Coal processing invariably generates substantial quantities of low calorific value waste, specifically coal gangue (CG), which can be advantageously utilized by combusting to yield valuable electrical energy. However, CG incur poor ignition and flame instability, and consequently is not suited to separate combustion. The co-combustion with sewage sludge (SS) has demonstrated positive impacts on energy recovery, whereas the SS dewatering may significantly influence the co-combustion behavior. Therefore, this study systematically investigated the impact of two typical sludge conditioner, namely FeCl3·6H2O and rice husk (RH), which functions as flocculant and skeletal builder, on their synergistic role on co-combustion with CG. The thermal dynamic combustion behavior, pollutant emissions, slag tendency and bottom ash stability and toxicity were systematically studied. A robust positive synergism is observed, attributed to heat compensation and the formation of alkali metal aluminosilicates from Rh during the ignition phase. Concurrently, the temperature dependent iron oxides evolution enhances the acceleration of O2 loop, thereby promoting the char combustion. After being jointly conditioned with Rh and FeCl3, the co-combustion with CG resulted in CCi being 3.46 times higher than that of C1S3, and the average activation energy in each stage was reduced by 49.1 %. Significantly, the sludge conditioner also contributes to the reduced exhausted gases such as CO2, SO2 and NO. The Rh in SS has been found to mitigate slagging and fouling tendencies, while the retention of Cr, Cu, Ni, and Pb is greatly improved due to the stabilization of silicate minerals in CG. The Artificial Neural Network (ANN) models were established to predict the thermogravimetric experimental data of CG-SS-Rh/Fe, which aims to provide a basis for the selection of optimal operating conditions in real industrial applications.

Metagenomics and metaproteomics reveal the effects of sludge types and inoculation modes on N,N-dimethylformamide degradation pathways and the microbial community involved

This study demonstrated the effects of the sludge type and inoculation method on the N,N-dimethylformamide degradation pathway and associated microbial communities. The sludge type is critical for DMF metabolism, with acclimatized aerobic sludge having a significant advantage in terms of DMF metabolism performance, whereas acclimatized anaerobic sludge has a reduced DMF metabolism capacity. Metagenomic revealed increased abundances of Methanosarcina, Pelomona and Xanthobacter in the adapted anaerobic sludge, suggesting that anaerobic sludge can utilize the methyl products produced by DMF metabolism for growth. Adapted aerobic sludge had high Mycobacterium abundance, significantly boosting DMF hydrolysis. In addition, a large number of dmfA2 genes were found in aerobic sludge, more so in acclimatized sludge, indicating stronger DMF metabolism. Conversely, acclimatized anaerobic sludge showed lower abundance of dmd-tmd and mauA/B, qhpA genes, implying long-term DMF toxicity reduced anaerobic microbial activity. Metaproteomic analysis showed that Methanosarcina and Methanomethylovorans enzymes in anaerobic sludge metabolized dimethylamine and methylamine to methane, aiding DMF degradation. In the aerobic sludge, aminohydrolase proteins, which hydrolyze DMF, were significantly upregulated. These findings provide insights into DMF wastewater treatment.

Microbiological Characterization and Pathogen Control in Drying Bed-Processed Sewage Sludge

This study investigated the microbiological and parasitic quality of sewage sludge treated in drying beds in Algeria, aiming to contribute to a better understanding of the factors influencing sludge safety for potential agricultural applications in the Algerian context. The research focused on various sludge types (liquid, semi-solid, and solid) and their behavior across different seasons. Standard microbiological methods were employed to quantify total coliforms, fecal streptococci, E. coli, and Clostridium. Controls were implemented to ensure accuracy, with positive controls validating detection methods using known quantities of microorganisms and parasites, while negative controls confirmed the absence of contamination in the testing environment. Parasitic contamination was assessed through microscopic examination for protozoa and helminths. Results revealed substantial variation in microbial concentrations across sludge types and seasons. Liquid sludge, particularly during summer, exhibited the highest levels of total coliforms (up to 7.021 log10) and E. coli (up to 6.049 log10), while solid sludge showed lower counts. Seasonal trends indicated increased microbial levels during warmer months. Parasitic contamination was prevalent in 81% of samples, with protozoan cysts (e.g., Giardia intestinalis and Endolimax nanus) and helminth eggs detected. Despite reducing microbial loads, drying processes alone were insufficient, leaving significant contamination. Enhanced protocols are needed, such as longer drying periods, chemical disinfectants, or advanced technologies like anaerobic digestion or composting. This highlights the need for locally adapted treatment strategies. Furthermore, this research provides specific recommendations for improving sewage sludge management practices in Algeria, taking into account the unique environmental and agricultural context of the country.

A Systematic Review and Meta-Analysis of the Sustainable Impact of Sewage Sludge Application on Soil Organic Matter and Nutrient Content

The increasing scarcity of natural resources makes the linear production model unsustainable, highlighting the need for more sustainable practices under the umbrella of circular economic principles. Sewage sludge emerges as a promising solution to provide soil organic matter (SOM) and nutrients. This meta-analysis evaluated the impacts of three levels of sludge application (low, medium, and high) on organic matter (OM), nitrogen (N), phosphorus (P), copper (Cu), and zinc (Zn) contents, considering different areas and experimental conditions worldwide. The analysis included 37 studies and 355 comparisons, after screening 7625 records, following the 2020 PRISMA protocol. The effects of sludge concentrations, continents, and types of experiment (field or greenhouse) were evaluated. Sewage sludge application significantly increased OM, N, Cu, and Zn levels, mainly at medium and high rates. The largest effects were observed in greenhouses, suggesting variation by location and environment. Moderators explained a part of the variation in the results, but the residual heterogeneity test revealed that there is still unexplained variability.

Developing a universal equation to estimate the mass of dewatered wastewater sludge during biological digestion at mesophilic and thermophilic temperatures.

A series of dewaterability tests were conducted on various types of sludges to establish a wholistic relationship between sludge water fractions. Sludge samples were obtained from batch and continuous sludge digesters, which were operated anaerobically and aerobically under mesophilic and thermophilic conditions. Dewaterability of the sludge samples and the distribution of water fractions were studied using centrifugation and thermal drying. Thickened waste activated sludge (T-WAS) contained 10-11 g bound water (BW)/g of total solids (TS), and it was more hydrophilic than primary and digested sludges. During anaerobic digestion, BW content fluctuated between 3.2 and 4.2 g BW/g TS. However, aerobic digestion at 55°C reduced the BW content of the mixed T-WAS + primary sludges from 3.7 to 2.1 g BW/g TS. A linear function was developed to correlate supernatant and BW mass fractions (R2 = 0.995). An equation was derived from the linear function to estimate the mass of dewatered sludge based on the TS concentration of the initial wet sludge. The developed expression is applicable to different kinds of wastewater sludges. Such an expression would be helpful for the designers and operators of sludge thickening and dewatering systems that use centrifugal separation.

Co-composting of Dried Sludge Types and Food Waste Using Compost Barrel

Co-composting of Dried Sludge Types and Food Waste Using Compost Barrel

Persistence evaluation of fecal pollution indicators in dewatered sludge and dewatering filtrate of municipal sewage sludge: The impacts of ambient temperature and conditioning treatments

Sludge resource utilization is one of the important routines for transmitting fecal pollution to water and soil, and sludge dewatering is a crucial step for sludge resource utilization. However, it remains unclear the decay characteristics and persistence of fecal pollution indicators after sludge dewatering. In this study, the persistence of six fecal pollution indicators, namely E. coli (EC), human-specific HF183 Bacteroides (HF183), human adenovirus (HAdV), human JC and BK polyomavirus (JCPyV and BKPyV), and crAssphage, in dewatered sludge cake and dewatering filtrate deriving from raw sewage sludge, as well as three types of sludge conditioned with polyacrylamide (PAM), Fenton's reagent, or Fe[III] and CaO were analyzed. The quantitative polymerase chain reaction (qPCR) and viability-qPCR methods were used to analyze the variation in abundances and infectivity of fecal pollution indicators in dewatered sludge cake or dewatering filtrate over the storage time, respectively. Decay predications of fecal pollution indicators over time were modeled using either the first-order or the biphasic decay model. The qPCR results revealed that fecal pollution indicators in dewatered sludge cake persisted longer than those in dewatering filtrate at the same temperature. Increasing temperature can accelerate the decay of fecal pollution indicators in both dewatered sludge cake and dewatering filtrate. Notably, sludge conditioning treatment may prolong the persistence of fecal pollution indicators in both dewatered sludge cake and dewatering filtrate. Viability-qPCR results indicated that the fecal pollution indicators (except HAdV) in dewatered sludge cakes deriving from both raw sewage sludge and conditioned sludges remained infectious for up to 30 days. After a storage period of 40 days, the abundances of fecal pollution indicators (except for EC) in sludge conditioned with Fenton's reagent were effectively decreased and meanwhile the infectivity of EC was reduced, exhibiting the lowest levels of fecal pollution. Therefore, both ambient temperature and conditioning treatment greatly impacted the decay characteristics and persistence of fecal pollution indicators in dewatered sludge cake and dewatering filtrate, and selecting suitable conditioning method can minimize environmental risks associated with fecal pollution in sewage sludge.

Dynamics of antibiotic resistance agents during sludge alkalinization treatment

This study aimed to assess the removal of antimicrobial resistance agents (antibiotics, antibiotic-resistant bacteria - ARB, and antimicrobial resistance genes - ARGs) from aerobic and anaerobic sludges treated with quicklime (chemical alkalinization). Different mixing ratios (25%, 35%, and 45%) and contact times (2 h and 72 h) were evaluated. The findings revealed that anaerobic sludge responded more effectively to alkaline treatment, achieving better removal rates of antibiotics, ARB, and ARGs compared to aerobic sludge. The 45% lime treatment yielded the highest antibiotic removal rates, with average reductions of 19% in aerobic sludge and 28% in anaerobic sludge. The 35% lime treatment was the most effective in reducing ARGs across both types of sludge (average removal of 2 logs). The 25% lime treatment proved most efficient for removing ARB, with average reductions of 4 logs (aerobic) and 5 logs (anaerobic). The contact time between the sludge and quicklime also influenced the removal of resistance agents. An increase in the proportion of antibiotics and the absolute concentration of ARB and ARGs was observed after 72 h compared to the samples analyzed after 2 h of contact. This increase was more pronounced in aerobic sludge samples treated with 35% and 45% lime. Despite the overall reduction, none of the monitored resistant genes or bacteria were completely eradicated in both sludge samples, raising concerns about their potential dissemination into the environment.

Unraveling the residual sludge-mediated waste transformation and physiological regulation mechanism of Tetradesmus obliquus

The accumulation of residual sludge as process waste from water treatment engineering needs to be addressed urgently. Tetradesmus obliquus is an important algal species in the field of wastewater treatment. In this study, T. obliquus was cultured in different sludge extract to determine its ability to utilize wastes from the liquid phase and convert them into biomass, and to analyze the response of the microalgae to toxic stress using proteomics. The results showed that the sludge extract medium was superior to the BG11 medium in accumulating biomass, with dry weights, proteins and polysaccharides at least 1.09, 1.12 and 1.28 times higher than those of BG11 medium. In toxic group, T. obliquus reduced TOC from an initial 426.8±20.0 mg/L to 180.4±8.5 mg/L with a simultaneous 48.4 % reduction in toxicity. Toxic sludge extract produced greater damage to the photosystem of T. obliquus compared to the blank, significantly inhibiting the expression of two photosystem II core proteins, A0A383VSL5 (0.290 down) and A0A383V2Z3 (0.308 down), on day 5. However, these impairments were reversible, and at day 20, the expression of A0A383VSL5 was not inhibited, the inhibitory effect of A0A383V2Z3 (0.575 down) was attenuated. These results fill a gap on the treatment of various types of residual sludge by T. obliquus and provide promising strategies for microalgae treatment of residual sludge, whether non-toxic or toxic.

Sludge Recovery from Wastewater Treatment Plants: A Review of Current Practices and Tips

Sludge recovery from “wastewater treatment plants” (WWTP) is an important aspect of the wastewater treatment process as it allows for the reuse of valuable resources and the reduction of waste. In this review, we examine current practices and tips for sludge recovery from wastewater treatment plants. We first discuss the various types of sludge produced in the treatment process, including primary, secondary, and tertiary sludge, and their respective characteristics. We then review the different methods used for sludge recovery, including thickening, dewatering, drying, and their respective advantages/disadvantages, and provide tips for optimizing sludge recovery, including proper sludge management, optimization of treatment processes, and incorporation of energy-efficient technologies. In parallel, we present an overview of the production, operation and nutrient composition of these sludges. Overall, the aim of this study is to provide an overview of sludge recovery in wastewater treatment plants and to offer practical insights for improving the efficiency and sustainability of this important process as well as the valorization of this important raw material.

Impact of several sludge dewatering conditioners on municipal sludge pyrolysis properties, kinetics, by-products, and environmental risk assessment

The pyrolysis characteristics of four different types of conditioned sludge were ascertained, and PAM, CaO, K2FeO4, and K2FeO4-CaO-PAM (KCP) conditioners were employed as sludge dewatering conditioners. The sludge pyrolysis reaction's activation energy (E) dropped with the addition of four conditioners. CaO, PAM, KCP, and K2FeO4 were the sequences of E needed for the pyrolysis of four different types of conditioned sludge. The addition of K2FeO4, CaO, and KCP resulted in an increase in the yields of H2 and CO. Except for the K2FeO4 conditioning sludge carbon, the pyrolytic carbon of the other three groups of samples showed an increase in S contents, while the pyrolytic carbon of the four groups of samples treated with conditioners clearly showed lower C and N contents compared to the raw sludge carbon. Protein-N made up the majority of N in sludge pyrolytic carbon. After adding conditioner, the level of organic sulfur decreased. Organic sulfur could then be broken down by K2FeO4 and CaO. The four conditioners efficiently mitigated the ecological and environmental risks posed by heavy metals. Alkynes were the most abundant result in pyrolytic volatiles of sludge pyrolysis; the other products included acids, alcohols, lipids, furans, ketones, phenols, hydrocarbons, N-components, and so on. All samples' acids, alcohols, and ketones from pyrolysis were decreased once the conditioner was added. The acid reduction rate reached 66.7 %, and the alkynes clearly increased during the KCP conditioned sludge's pyrolysis. The sulfur level of the bio-oil was decreased by all four conditioners. Everything mentioned above indicated that the KCP aided in the subsequent pyrolysis of the sludge, leading to the production of an advantageous pyrolysis bio-oil.

Unveiling the common laws of extracellular polymeric substances (EPS) properties on short-chain fatty acids production from sludge by EPS disintegration pretreatment

The production of short-chain fatty acids (SCFAs) from sludge is promising, but the efficiency and product quality often vary because of extracellular polymeric substances (EPS) characteristics and pretreatment principles. This study adopted specific EPS disintegration pretreatment to treat different types of sludge. By correlation coefficient matrix analysis and correlation dynamics change resolution, the intrinsic relationships between the nature of EPS and the production of SCFAs from sludge was unveiled. We demonstrate that tight-bound EPS (TB-EPS) is a principal carbon reservoir, positively impacting SCFAs yields, in the fermentation system with EPS as the main fermentation substrate, it can contribute about 29.2 % for SCFAs growth during fermentation. Conversely, TB-EPS exhibits a negative correlation during fermentation due to EPS-SCFAs interconversion, while loosely bound EPS (LB-EPS) correlates positively. Proteins and polysaccharides in TB-EPS, especially proteins, significantly enhance individual SCFAs yields, predominantly acetic, propionic, and isovaleric acids. The findings would provide a theoretical basis for developing pretreatments and process-control technologies aimed at improving SCFAs production efficiency and quality.

Alkali-activated geopolymers based on calcined phosphate sludges and metakaolin.

The extraction of phosphorite ore in Tunisia has resulted in the discharge of substantial amounts of phosphatic sludge into the region's water system. To mitigate this environmental issue and prevent heavy metal leaching, a geopolymerization process was employed using two types of Tunisian calcined phosphate sludges (Cal-PS1 and Cal-PS2) as substitutes for alkali-activated metakaolin. This study aimed to investigate and compare the physical and mechanical properties of the resulting geopolymers. The optimal substitution ratio of metakaolin with calcined phosphate sludge was determined to be 1.5, equivalent to 20 wt.% of calcined phosphate sludge. Compressive strength tests conducted after 28 days of curing revealed values of 37 MPa for Cal-PS1 specimens and 28 MPa for Cal-PS2 geopolymers while compressive strength of geopolymers soaked in water for 28 days showed a decrease with the addition of phosphate sludges. The specific surface areas of Cal-PS1 geopolymers ranged from 16.3 to 16.9 m2/g and from 17.62 to 18.73 m2/g for Cal-PS2 specimens exhibiting a mesoporous structure. The elasticity modulus of the geopolymers was found to increase with the increase of the apparent density of geopolymers and with the sludges content but it tended to be lower than the Portland cement elasticity modulus. Leaching test was conducted to evaluate the potential environmental applications of the geopolymers. This test demonstrated effective containment of heavy metals within the geopolymers' network, except for low levels of arsenic.

Microbial Biomass in Mesophilic and Thermophilic High-Rate Biodigestion of Sugarcane Vinasse: Similar in Quantity, Different in Composition

This study compared the behavior of the biomass in two fixed-film anaerobic reactors operated under equivalent organic loading rates but at different temperatures, i.e., 30 °C (RMM) and 55 °C (RMT). The reactors were fed with sugarcane vinasse and molasses (both fermented) in a simulation of sequential periods of season and off-season. The dynamics of biomass growth and retention, as well as the microbial composition, were assessed throughout 171 days of continuous operation, coupled with an additional 10-day test assessing the microbial activity in the bed region. Despite the different inoculum sources used (mesophilic granular vs. thermophilic flocculent sludge types), the biomass growth yield was identical (0.036–0.038 g VSS g−1COD) in both systems. The retention rates (higher in RMT) were regulated according to the initial amount of biomass provided in the inoculation, resulting in similar amounts of total retained biomass (46.8 vs. 43.3 g VSS in RMT and RMM) and biomass distribution patterns (30–35% in the feeding zone) at the end of the operation. Meanwhile, hydrogenotrophic methanogenesis mediated by Methanothermobacter coupled to syntrophic acetate oxidation prevailed in RMT, while the Methanosaeta-mediated acetoclastic pathway occurred in RMM. The results show that different anaerobic consortia can behave similarly in quantitative terms when subjected to equivalent organic loads, regardless of the prevailing methane-producing pathway. The community grows and reaches a balance (or a given cell activity level) defined by the amount of substrate available for conversion. In other words, while the metabolic pathway may differ, the endpoint (the amount of biomass) remains the same if operational stability is maintained.

Treatment of sewage sludge with γ‐ray irradiation for volatile fatty acids and lipid production

AbstractThe production of value‐added products from sewage sludge is considered to be one of the solutions for the sustainable management of sludge in wastewater treatment plants (WWTPs). The presence of carbon, nitrogen, and phosphorus sources has made the sewage sludge of WWTPs a valuable and low‐cost substrate for the production of fermentative products. In the current study, a process was developed for microbial lipid production from two types of sewage sludge from a WWTP in northern Isfahan: anaerobic digester inlet sludge (DIS) and anaerobic digester outlet sludge (DOS). This process was based on the release of volatile fatty acids (VFAs) from the sludge by combinations of γ‐ray irradiation, anaerobic digestion, and acidogenic fermentation followed by utilization of VFAs in a microbial process by the oleaginous yeast Cryptococcus aureus UIMC65. After γ‐ray irradiation, the acidogenic fermentation of the treated sludge released 72% of the organic matter content of the sludge with acidification efficiency of 12% leading to 0.516 g L−1 VFAs. The oleaginous fermentation of the released VFAs for 7 days was accompanied by production of 1.58 g L−1 dry cell biomass with 40% lipid content. The results of this study indicate that the sewage sludge from urban WWTP has the potential to be used for the production of microbial lipids.

Strategy for clean phosphate recovery from polymerized aluminum chloride-treated sludge by alkaline anion exchange resins: High alkalinity and desorption

Polyaluminum chloride (PAC) is commonly used as a flocculant in wastewater treatment plants to aid in the removal of phosphorus (P) from wastewater. As a result, the P element present in PAC-treated sludge is predominantly in the form of Al-P. This study proposes the use of alkaline anion exchange resin (AAER) as a pretreatment method for PAC-treated sludge to enhance P extraction and achieve cleaner P recovery from this type of sludge. The findings of the study indicate that the optimal concentration of AAER is 12 g/g TS, resulting in a P extraction efficiency of 67.2 %. This represents a 26.5 % increase compared to alkali treatment at the same pH (pH = 12.23). Stepwise extraction analysis and molecular dynamics simulations suggest that during AAER treatment, Al(OH)3 is converted into dissolved [Al(OH)4]−. These species then agglomerate with PO43− and subsequently get adsorbed by the N(CH3)+ groups on the AAER. Furthermore, even after undergoing five regeneration cycles, the AAER still exhibits a significant adsorption capacity for P. Ultimately, high-purity Ca10(PO4)6(OH)2 is obtained as the final product with a recovery rate of 90.5 %. Meanwhile, the Al extracted by AAER can be reused as a feedstock for polymerized aluminum chloride. This demonstrates that AAER extraction is a promising and efficient waste management strategy for the clean recovery of P and Al from PAC sludge.