Types Of Materials Research Articles

Vulnerability to semantic and phonological interference in normal aging and amnestic mild cognitive impairment (aMCI).

To determine whether the increased vulnerability to semantic interference previously observed in amnestic mild cognitive impairment (aMCI) is specifically associated with semantic material or if it also affects other types of material, suggesting generalized executive and inhibitory impairment. Seventy-two participants divided into two groups (33 aMCI, 39 normal control [NC]) matched for age and education were included. They completed a comprehensive neuropsychological examination, the French version of the Loewenstein Acevedo Scale for Semantic Interference and Learning (LASSI-L; semantic interference test), and a homologous experimental phonological test, the phonological interference and learning test. Independent sample t tests, mixed analysis of variance (ANOVA), and analysis of covariance (ANCOVA) on memory and interference scores were conducted to compare memory and interference in both conditions for both groups. For memory scores, results revealed significant main effects of group (NC > aMCI) and condition (semantic > phonological) and significant interactions (poorer performance in the semantic condition for aMCI). aMCI committed more phonological false recognition errors, were disproportionately more vulnerable to retroactive semantic interference, and showed a higher percentage of intrusion errors associated with proactive semantic interference than NC. To our knowledge, this is the first study to compare vulnerability to interference in aMCI and normal aging with two similarly designed semantic and phonological word list learning tasks. Taken together, our results suggest that aMCI present with broad difficulties in source memory and inhibition, but that impaired deep semantic processing results in additional semantic intrusion errors during proactive interference and impacts their ability to show good recall after an interference list (greater semantic retroactive interference). Results are discussed according to the level-of-processing and activation/monitoring theories. (PsycInfo Database Record (c) 2024 APA, all rights reserved).

Disorder induced band gap lowering in kesterite type Cu2ZnSnSe4 and Ag2ZnSnSe4: a first-principles and special quasirandom structures investigation

Quaternary chalcogenides, i.e. Cu2ZnSnS4, crystallising in the kesterite crystal structure have already been demonstrated as potential building blocks of thin film solar cells, containing only abundant elements and exhibiting power conversion efficiencies of about 14.9% so far. However, due to the potential presence of several structurally similar polymorphs, the unequivocal identification of their ground state crystal structures required the application of more elaborate neutron diffraction experiments. One particular complication arose from the later identified Cu–Zn disorder, present in virtually all thin film samples. Subsequently, it has been shown experimentally that this unavoidable Cu–Zn disorder leads to a band gap lowering in the respective samples. Additional theoretical investigations, mostly based on Monte-Carlo methods, tried to understand the atomistic origin of this disorder induced band gap lowering. Here, we present theoretical results from first-principles calculations based on density functional theory for the disorder induced band gap lowering in kesterite Cu2ZnSnSe4 and Ag2ZnSnSe4, where the Cu–Zn and Ag–Zn disorder is modelled via a supercell approach and special quasirandom structures. Results of subsequent analyses of structural, electronic, and optical properties are discussed with respect to available experimental results, and will provide additional insight and knowledge towards the atomistic origin of the observed disorder induced band gap lowering in kesterite type materials.

A study of chloride binding capacity of concrete containing supplementary cementitious materials

Chloride-induced steel corrosion is known to be a very common kind of deterioration of reinforced concrete. It is beneficial to bind free chloride ions to reduce the corrosion probability of the reinforcement embedded in the concrete. The binding capacity of the concrete varies according to its cementitious system. This paper investigates the chloride binding capacity of different kinds of supplementary cementitious materials (SCMs): Ground granulated blast furnace slag (GGBFS), Fly ash, and Metakaolin as a partial replacement of Ordinary Portland Cement (OPC). Different properties of concrete after chloride binding are assessed by carrying out the following tests: half-cell potential, accelerated corrosion test, compressive strength, rapid chloride penetration test, sorptivity test, measuring pH value of concrete, and XRD. The results showed that utilizing the SCMs in concrete can enhance the chloride binding capacity, especially those materials that have high quantities of aluminate and calcium in their chemical composition like GGBFS. Based on testing results, it’s recommended that the limit of the chloride content in the different codes should be revised regarding the binding capacity according to the type and quantity of the cementitious materials used.

Balancing Polarization and Breakdown for High Capacitive Energy Storage by Microstructure Design.

The compromise of contradictive parameters, polarization, and breakdown strength, is necessary to achieve a high energy storage performance. The two can be tuned, regardless of material types, by controlling microstructures: amorphous states possess higher breakdown strength, while crystalline states have larger polarization. However, how to achieve a balance of amorphous and crystalline phases requires systematic and quantitative investigations. Herein, the trade-off between polarization and breakdown field is comprehensively evaluated with the evolution of microstructure, i.e., grain size and crystallinity, by phase-field simulations. The results indicate small grain size (≈10-35nm) with moderate crystallinity (≈60-80%) is more beneficial to maintain relatively high polarization and breakdown field simultaneously, consequently contributing to a high overall energy storage performance. Experimentally, therefore an ultrahigh energy density of 131 J cm-3 is achieved with a high efficiency of 81.6% in the microcrystal-amorphous dual-phase Bi3NdTi4O12 films. This work provides a guidance to substantially enhance dielectric energy storage by a simple and effective microstructure design.

Molecular phylogeny of the marine diatom genus Druehlago (Bacillariophyceae) from Japan

SUMMARYThe diatom genus Druehlago was established to differentiate the type species from Craspedostauros and Achnanthes, on the basis of unique heteropolar, cuneate frustules and numerous lenticular plastids. The phylogenetic placement of Druehlago has, until now, relied solely on morphological evidence, suggesting a close relationship with the genus Craspedostauros. In the present study, we discovered a population of Druehlago cf. cuneata along the coast of Japan and established a cultured strain. Molecular phylogenetic analysis based on rbcL, psbC and 18S rRNA genes was conducted to explore the phylogenetic position and classification of Druehlago. Our results revealed that D. cf. cuneata belongs to the Craspedostauros clade, but with weak statistical support, which is, in turn, sister to Achnanthes. Given the lack of support for various nodes within the Craspedostauros clade, constrained trees were constructed based on several hypotheses regarding the phylogenetic position of Druehlago. The hypothesis inferring monophyly of Druehlago and Achnanthes was statistically rejected, which highlights the close relationship between Druehlago and Craspedostauros. However, our topology tests provided no further resolution regarding the phylogenetic position of Druehlago within or outside Craspedostauros. Furthermore, the treatment of the specimens is discussed through a morphological comparison with the type of material.

Response of hydrogen charging diffusion of the austenitic stainless steel AISI 310s

The subject of hydrogen embrittlement seems to be more and more up-to-date and needed to be explored. World research teams working on this issue have not developed a clear method of preventing this process. The conclusion is that this issue should be approached individually, depending on the type of material, its structure and operating conditions. The problem will escalate in the near future as a result of the planned replacement of the traditional energy sources used so far with hydrogen energy. The paper presents the method of electrochemical hydrogenation, which reflects the conditions of galvanic coating of metallic materials used in the automotive industry. The aim of the research was to determine the influence of the time of hydrogenation on the properties and microstructure of austenitic steel.

QUALITY CONTROL METHODS AND MODELS OF POLYMER COMPOSITE MATERIALS

This article analyzes the traditional and modern methods of demolition control applied to structures made of polymer composite materials. Polymer composite materials are designed to ensure the strength of structures with a minimum mass, not subject to corrosion, etc. as there are advantages. But such materials require a special approach in the preparation and creation and the application of new methods, tools and solutions. This is due to the fact that there are many different types of polymer composite materials. Therefore, the development of criteria for the analysis of quality control methods and models, reliability forecasting in the technology of manufacturing products from polymer composite materials is an urgent issue. The authors give recommendations for the selection of methods for a complete assessment of the quality of compositional materials. The analysis of effective methods of quality control and forecasting of reliability of polymer composite materials was carried out. For this purpose, factors for the choice of the method and reliability prediction have been identified, taking into account its complexity for controlling polymer composite materials. Models for controlling polymer composite materials and products made on its basis were selected and on their basis the effectiveness of the application of low-frequency ultrasonic devices at the separation boundaries of controlled environments was determined.

Trap-controllable near-ultraviolet elastico-mechanoluminescence of Ce3+ doped phyllosilicate with melilite-type structure

Mechanoluminescence (ML) materials have attracted much attention because of their mechano-optical conversion characteristics, which have shown broad application prospects in stress sensing and anti-counterfeiting technology in the past few decades. However, elastico-ML has not been demonstrated at the near-ultraviolet (NUV) range. In this study, a novel NUV elastico-ML material (Ca, Sr)8Mg3Al2Si7O28:Ce3+ (CSMASOC) with a melilite-type structure is successfully developed. The ML properties of CSMASOC were optimized by adjusting the doping concentration of Ce3+ and cation substitution, and the ML mechanism was also explored by analyzing the ML test under different irradiation conditions and thermoluminescence spectra. The results confirmed that the ML in CSMASOC was derived from 5d-4f transition of Ce3+, and CSMASOC belongs to trap-controllable ML material. In addition, NUV ML material CSMASOC is combined with several commercial phosphors, and constructed multi-color ML in the visible light range. The developed NUV ML materials and the constructed multi-color ML system in this work are critical for expanding the types of ML materials and promoting the practical application of ML materials.

The poroelastic layer with an axisymmetric cylindrical hole under different types of loading

The exact solution of the poroelastic axisymmetric problem for a layer with a cylinderical hole is constructed under assumptions of Biot's model. The calculations provided by derived explicit formulas for full stress and pore pressure allow to state some important dependencies between the poroelastic stress state of the layer and type of poroelastic materials, loading types and height of the layer.

A review on the magnetorheological materials and applications

Magnetorheological materials refer to field-response smart materials whose properties are controllable with a magnetic field, including fluid, grease, elastomer, and gel. The unique magnetorheological effect exhibited by these smart materials is a physical phenomenon where physics and engineering intersect and has extensive application prospects in modern machinery. In electro-mechanical systems, magnetorheological materials offer a superior design method for mechanical devices used in the fields of transmission, damping, and braking. It is important to control the magnetorheological materials for advancing the design philosophy of modern electro-mechanical devices. Hence, this paper presents a recent progressive review on the fundamentals of magnetorheological materials and numerous applications. Firstly, an introduction to the magnetorheological effect and different types of magnetorheological materials are presented in this review. Then, the individual and coupled effects of sedimentation, temperature, and magnetic field on magnetorheological materials are discussed. Finally, magnetorheological materials-based devices have been extensively reviewed, including actuator, clutch, damper, brake, pump, valve, and robot, thus aiming to provide useful information for facilitating the design of complex electro-mechanical systems.

Plasmon-Induced Hot Electrons in Nanostructured Materials: Generation, Collection, and Application to Photochemistry.

Plasmon refers to the coherent oscillation of all conduction-band electrons in a nanostructure made of a metal or a heavily doped semiconductor. Upon excitation, the plasmon can decay through different channels, including nonradiative Landau damping for the generation of plasmon-induced energetic carriers, the so-called hot electrons and holes. The energetic carriers can be collected by transferring to a functional material situated next to the plasmonic component in a hybrid configuration to facilitate a range of photochemical processes for energy or chemical conversion. This article centers on the recent advancement in generating and utilizing plasmon-induced hot electrons in a rich variety of hybrid nanostructures. After a brief introduction to the fundamentals of hot-electron generation and decay in plasmonic nanocrystals, we extensively discuss how to collect the hot electrons with various types of functional materials. With a focus on plasmonic nanocrystals made of metals, we also briefly examine those based upon heavily doped semiconductors. Finally, we illustrate how site-selected growth can be leveraged for the rational fabrication of different types of hybrid nanostructures, with an emphasis on the parameters that can be experimentally controlled to tailor the properties for various applications.

Research on the Asymmetric Phenomenon of Voltage Polarity Based on Dielectric Wetting.

The present research investigated the voltage polarity asymmetry phenomenon based on dielectric wetting. In an ITO-hydrophobic layer-droplet setup, three reagents with different pH values (3.96, 7.0, and 10.18), two types of hydrophobic materials (AF1601 and 6%T6), and two different thicknesses (340 nm and 2.5 μm) of each material were systematically investigated. The results show that the thickness of the hydrophobic dielectric layer and the pH of the droplets had a significant impact on the droplet contact angle variation with the voltage. The contact angle on the thick hydrophobic dielectric layer followed the Lippmann-Young equation as the voltage changed. The angle of the thin hydrophobic dielectric layer was affected by its own properties and the type of droplet, which led to the occurrence of voltage polarity asymmetry of the electrowetting phenomenon. After further investigation of this phenomenon, it was found that it mainly accounted for the decrease in electric field strength at both ends of the droplet, which was caused by electrochemical reactions and changes in circuit resistance. The leakage current is an important indicator, and this phenomenon can be prevented by increasing the thickness of the hydrophobic dielectric layer.

Smart responsive staple for dynamic promotion of anastomotic stoma healing

The precise combination of conflicting biological properties through sophisticated structural and functional design to meet all the requirements of anastomotic healing is of great demand but remains challenging. Here, we develop a smart responsive anastomotic staple (Ti–OH-MC) by integrating porous titanium anastomotic staple with multifunctional polytannic acid/tannic acid coating. This design achieves dynamic sequential regulation of antibacterial, anti-inflammatory, and cell proliferation properties. During the inflammatory phase of the anastomotic stoma, our Ti–OH-MC can release tannic acid to provide antibacterial and anti-inflammatory properties, together with immune microenvironment regulation function. At the same time, as the healing progresses, the multifunctional coating gradually falls off to expose the porous structure of the titanium anastomotic staple, which promotes cell adhesion and proliferation during the later proliferative and remodeling phases. As a result, our Ti–OH-MC exceeds the properties of clinically used titanium anastomotic staple, and can effectively promote the healing. The staple’s preparation strategy is simple and biocompatible, promising for industrialisation and clinical application. This work provides an effective anastomotic staple for anastomotic stoma healing and serve as a reference for the functional design and preparation of other types of titanium-based tissue repair materials.

Integrative taxonomy of the groundwater amphipod Niphargus bihorensis Schellenberg, 1940 reveals a species-rich clade

Abstract The genus Niphargus is the most diverse subterranean amphipod genus in the western Palearctic region but, owing to the presence of cryptic species and homoplasy, its taxonomy and biogeographic scenarios are complex, making molecular methods essential to understand its evolution. We conducted a study combining dna-based taxonomy with traditional morphotaxonomy to investigate Niphargus bihorensis Schellenberg, 1940, known from the Western Alps and Carpathians. We redescribed the type material of N. bihorensis from Bihor County, Romania, and revealed the presence of a cryptic species, N. absconditus n. sp., in the same karstic area (Pădurea Craiului Mountains). Additionally, the Alpine populations previously attributed to N. bihorensis turned out to belong to a new, not so closely related species, N. tizianoi n. sp. Phylogenetic analyses based on a concatenated dataset of one mitochondrial and two nuclear markers suggest that the N. bihorensis species complex belongs to a strongly supported clade, together with several species distributed from Switzerland to Iran.

Exploring TikTok's Effectiveness for Local Brand Promotion: A Case Study of Conseva in Indonesia

This study looks into the efficiency of TikTok as a promotional tool for Conseva, an Indonesian company that specialises in fashion accessories and stationery. With an emphasis on reaching a bigger audience, particularly Indonesian women aged 25-34, the study uses a mixed-methods approach to evaluate TikTok's influence on brand awareness, audience engagement, and consumer behaviour. The study examined four different types of films for the Conseva Arctic collection, showing the difficulty of properly engaging the audience and driving customer behaviour through TikTok content. The findings highlight the importance of storytelling and hashtag strategies in digital marketing, emphasising the need for a more nuanced understanding of hashtag success on TikTok. The study's findings add to the expanding conversation about digital marketing by providing insights into the obstacles and opportunities connected with using TikTok as a promotional medium for local brands. However, the study's shortcomings, such as the inability to measure long-term impact and the emphasis on specific material types, should be taken into account when interpreting the results. Future research may address these limitations and expand our understanding of TikTok as a promotional tool for local brands.

Consumer Engagement in Fashion Circularity in China: Exploring Consumer Online Fashion Resale through the Lens of Social Practice Theory

Fashion resale has emerged as a notable strategy for the fashion industry to reduce its environmental footprint by promoting fashion circularity. Despite extensive research on consumer awareness of resale and the purchase of pre-owned items, there remains a gap in understanding the factors that influence consumers’ participation in resale markets, encompassing both selling and buying practices. Drawing on social practice theory (SPT), this qualitative study examines the nuanced factors influencing consumers’ online resale practices and investigates how online fashion resale practices (OFRPs) have become integrated into their daily consumption patterns. In-depth interviews were conducted with thirty experienced Chinese consumers engaged in both the selling and buying practices of secondhand fashion. Initially, the study identified eight nuanced motivations and seven challenges influencing consumers’ OFRPs. Subsequently, the research uncovered two types of materials and seven core skills necessary for successful OFRP transactions, along with six associated meanings of OFRPs. Specifically, we found that participants seamlessly integrated OFRP into their daily routines through nurtured sociality, and OFRP only fostered sustainable consumption behaviors in one-third of participants, suggesting significant room for improvement. This study provides empirical insights into the existing literature and offers actionable recommendations to key stakeholders for advancing fashion circularity—a critical objective for the sustainability of the fashion industry.

INSIGHTS INTO MICROPLASTICS POLLUTION IN AQUATIC ECOSYSTEM: A SHORT REVIEW OF SAMPLING AND ANALYSIS METHODS

The prevalence of microplastics in the environment and their potential adverse impacts on wildlife and human well-being make them a pressing global ecological issue. The objective of this review is to provide better understanding prevalence and distribution of microplastics, factors influencing their concentration and transport, the sampling technique and polymer identification analysis used in various studies and future research needs. The identification of microplastic polymer types is also explored, including techniques such as Fourier-transform infrared spectroscopy (FTIR) and Raman spectroscopy. It also points out the many types of sampling equipment and materials, as well as sample preparation and analysis. Sampling method and polymer identification analysis of microplastics may vary on the circumstances of the location and question of the research. Suitable and standardize for both methods should be prioritized to ensure reliable and precise collection of data regarding the microplastic in river and estuarine.

Determining the Reactivity of Selected Biomass Types Considering Their Application in Pyrometallurgical Processes of Metal Production.

In this paper, results of research on the reactivities of selected biomass types considering their application in pyrometallurgical processes of metal production are presented. Walnut shells, sunflower husk pellets and spent coffee grounds were selected as biomass materials. Their use as potential reducers in the process of metallurgical slag decopperisation is an innovative approach to this subject. The thermogravimetric findings show that all three tested biomass types are classified as highly reactive. The time to reach maximum reactivity ranges from 1.5 to 3 min and, the lowest value is recorded for the sample of spent coffee grounds. The sample hold time of two hours enables copper content reduction to approx. 1 wt% for practically all the reducers tested. A longer duration of liquid slag contact with the reducer results in a decreased copper content in the slag to a value below 1 wt%. Copper concentrations of 0.5 wt% and lower are observed with a hold time of 4 h. The preliminary results indicate that there is great potential for the use of this type of material in non-ferrous metallurgy, which may translate into replacing fossil raw materials and thus introducing the principles of a sustainable process in this case of metal production.

Sideband Peak Count – a new nonlinear ultrasonic technique for monitoring damage progression in engineering materials

Linear ultrasonic (LU) techniques used by majority of the researchers working in material damage monitoring, are reliable for detecting relatively large defects. If the defect dimensions are in the range of the ultrasonic wavelength or larger, then those defects can be detected by analyzing the scattered ultrasonic fields. Material damage affects LU parameters such as ultrasonic wave speed and attenuation and their changes are detectable for relatively large defects. However, for small defects (when defect dimensions are significantly smaller than the wavelength of the propagating signal) the changes in the LU parameters are too small to detect or measure reliably. For detecting small defects engineers often use high frequency ultrasonic signals to make the defect dimensions greater than the wavelength. However, high frequency signals attenuate quickly and therefore, only very small regions near the ultrasonic probe can be inspected in this manner. Inspecting large structures by high frequency ultrasonic signals requires moving the probe mechanically from one point to the next and therefore, can be very time consuming. Nonlinear ultrasonic (NLU) technique on the other hand does not need to satisfy this restricting condition that the wavelength of the signal must be smaller than the defect size. NLU works well when the signal wavelength is much larger than the defect size. Therefore, relatively low frequency signals that can propagate a long distance and monitor a large area of a structure can be used for NLU measurements. Different NLU techniques can be used for detection and monitoring of small damages in a specimen. A relatively new NLU technique called the Sideband Peak Count-Index or SPC-I technique has been developed by the author and his collaborators. SPC-I technique for monitoring different types of materials – composites, metals, concrete, and other cement-based materials has been found to be effective. Along with those success stories of SPC-I the effect of topography and the advantage of topological sensing is also discussed in this presentation.

Effect of ICCP on tensile performance and piezoresistive effect of CFRCM plates

Currently, extensive research has been conducted on carbon fabric−reinforced cementitious matrix (CFRCM) composites, impressed current cathodic protection (ICCP), and the piezoresistive effect in the field of strengthening of reinforced concrete (RC) structures, corrosion protection of steel reinforcement, and structural health monitoring, respectively. This study utilized two types of matrix materials: normal matrix (sand conforming to ISO standard) and seawater sea-sand matrix. The mechanism by which the ICCP procedure affects the degradation of tensile performance in CFRCM plates with these two types of matrix materials was investigated in the study. Additionally, the piezoresistive effects of CFRCM with the two types of matrix materials after the ICCP procedure were analyzed, and the impact of ICCP on the piezoresistive effect was also investigated. By observing the piezoresistive effect of each CFRCM segment, the sequence of crack propagation and an approximate crack location can be inferred. Finally, the tensile performance of CFRCM with charge density was investigated. Leveraging the dual functionality of carbon fiber reinforcement and sensing, this study lays the groundwork for the development of a triple-functional system encompassing impressed current cathodic protection, structural strengthening, and structural health monitoring (ICCP-SS-SHM). Seawater sea-sand has the potential to be used as an alternative to freshwater river sand, which is beneficial for addressing the shortage of freshwater river sand resources.