Type IIS Restriction Research Articles

Synthetic DNA Assembly Using Golden Gate Cloning and the Hierarchical Modular Cloning Pipeline.

Methods that enable the construction of recombinant DNA molecules are essential tools for biological research and biotechnology. Golden Gate cloning is used for assembly of multiple DNA fragments in a defined linear order in a recipient vector using a one-pot assembly procedure. Golden Gate cloning is based on the use of a type IIS restriction enzyme for digestion of the DNA fragments and vector. Because restriction sites for the type IIS enzyme used for assembly must be present at the ends of the DNA fragments and vector but absent from all internal sequences, special care must be taken to prepare DNA fragments and the recipient vector with a structure suitable for assembly by Golden Gate cloning. In this article, protocols are presented for preparation of DNA fragments, modules, and vectors suitable for Golden Gate assembly cloning. Additional protocols are presented for assembly of defined parts in a transcription unit, as well as the stitching together of multiple transcription units into multigene constructs by the modular cloning (MoClo) pipeline. © 2020 The Authors. Basic Protocol 1: Performing a typical Golden Gate cloning reaction Basic Protocol 2: Accommodating a vector to Golden Gate cloning Basic Protocol 3: Accommodating an insert to Golden Gate cloning Basic Protocol 4: Generating small standardized parts compatible with hierarchical modular cloning (MoClo) using level 0 vectors Alternate Protocol: Generating large standardized parts compatible with hierarchical modular cloning (MoClo) using level -1 vectors Basic Protocol 5: Assembling transcription units and multigene constructs using level 1, M, and P MoClo vectors.

Multigene Engineering by GoldenBraid Cloning: From Plants to Filamentous Fungi and Beyond.

Many synthetic biologists have adopted methods based on Type IIS restriction enzymes and Golden Gate technology in their cloning procedures, as these enable the combinatorial assembly of modular elements in a very efficient way following standard rules. GoldenBraid (GB) is a Golden Gate-based modular cloning system that, in addition, facilitates the engineering of large multigene constructs and the exchange of DNA parts as result of its iterative cloning scheme. GB was initially developed specifically for plant synthetic biology, and it has been subsequently extended and adapted to other organisms such as Saccharomyces cerevisiae, filamentous fungi, and human cells by incorporating a number of host-specific features into its basic scheme. Here we describe the general GB cloning procedure and provide detailed protocols for its adaptation to filamentous fungi-a GB variant known as FungalBraid. The assembly of a cassette for gene disruption by homologous recombination, a fungal-specific extension of the GB utility, is also shown. Development of FungalBraid was relatively straightforward, as both plants and fungi can be engineered using the same binary plasmids via Agrobacterium-mediated transformation. We also describe the use of a set of web-based tools available at the GB website that assist users in all cloning procedures. The availability of plant and fungal versions of GB will facilitate genetic engineering in these industrially relevant organisms. © 2020 by John Wiley & Sons, Inc. Basic Protocol 1: Software-assisted modular DNA assembly of a two gene expression-cassette with GB Basic Protocol 2: Agrobacterium tumefaciens-mediated transformation of filamentous fungi Basic Protocol 3: Software-assisted modular DNA assembly of a gene disruption-cassette using GB Basic Protocol 4: Obtaining disruption transformants.

Detection of Marker-Free Precision Genome Editing and Genetic Variation through the Capture of Genomic Signatures

SUMMARYGenome editing technologies have transformed our ability to engineer desired genomic changes within living systems. However, detecting precise genomic modifications often requires sophisticated, expensive, and time-consuming experimental approaches. Here, we describe DTECT (Dinucleotide signaTurE CapTure), a rapid and versatile detection method that relies on the capture of targeted dinucleotide signatures resulting from the digestion of genomic DNA amplicons by the type IIS restriction enzyme AcuI. DTECT enables the accurate quantification of marker-free precision genome editing events introduced by CRISPR-dependent homology-directed repair, base editing, or prime editing in various biological systems, such as mammalian cell lines, organoids, and tissues. Furthermore, DTECT allows the identification of oncogenic mutations in cancer mouse models, patient-derived xenografts, and human cancer patient samples. The ease, speed, and cost efficiency by which DTECT identifies genomic signatures should facilitate the generation of marker-free cellular and animal models of human disease and expedite the detection of human pathogenic variants.

A simple and efficient cloning system for CRISPR/Cas9-mediated genome editing in rice.

Rapidly growing genetics and bioinformatics studies provide us with an opportunity to obtain a global view of the genetic basis of traits, but also give a challenge to the function validation of candidate genes. CRISPR/Cas9 is an emerging and efficient tool for genome editing. To construct expression clones for the CRISPR/Cas9, most current methods depend on traditional cloning using Gateway reaction or specific type IIS restriction enzymes and DNA ligation, based on multiple steps of PCR. We developed a system for introducing sgRNA expression cassette(s) directly into plant binary vectors in one step. In this system, one sgRNA expression cassette(s) is generated by an optimized multiplex PCR, in which an overlapping PCR took place. Whilst, two sgRNA expression cassettes were amplified in a single round of PCR. Subsequently, an LR or Golden gate reaction was set up with unpurified PCR product and befitting destination vector. We are able to construct expression clones within 36 h, which greatly improves efficiency and saves cost. Furthermore, the efficiency of this system was verified by an agrobacterium-mediated genetic transformation in rice. The system reported here provides a much more efficient and simpler procedure to construct expression clones for CRISPR/Cas9-mediated genome editing.

A One-Step Process for the Construction of Phage Display scFv and VHH Libraries.

In this work we present a one-step cloning approach for the establishment of antibody phage display libraries relying on type IIs restriction enzymes. We show that single chain variable fragment (scFv) libraries with adequate qualities can readily be cloned in a 'scar-less' manner and that the isolation of antigen-specific antibodies from immunized chickens is feasible within three selection rounds. Moreover, we demonstrate the general applicability of this method by rapidly constructing and panning VHH single domain antibody phage display libraries from immunized Llama repertoires.

Generation of MoClo Standard Parts Using Golden Gate Cloning.

Availability of efficient DNA assembly methods is a basic requirement for synthetic biology. A variety of modular cloning systems have been developed, based on Golden Gate cloning for DNA assembly, to enable users to assemble multigene constructs from libraries of standard parts using a series of successive one-pot assembly reactions. Standard parts contain the DNA sequence coding for a genetic element of interest such as a promoter , coding sequence or terminator . Standard parts for the modular cloning system MoClo must be flanked by two BsaI restriction sites and should not contain internal sequences for two type IIS restriction sites, BsaI and BpiI, and optionally for a third type IIS enzyme, BsmBI. We provide here a detailed protocol for cloning of basic parts. This protocol requires the following steps (1) defining the type of basic part that needs to be cloned, (2) designing primers for amplification, (3) performing PCR amplification, (4) cloning of the fragments using Golden Gate cloning, and finally (5) sequencing of the part. For large basic parts, it is preferable to first clone subparts as intermediate level-1 constructs. These subparts are sequenced individually and are then further assembled to make the final level 0 module.

Improving plant transient expression through the rational design of synthetic 5\u2032 and 3\u2032 untranslated regions

BackgroundThe growing field of plant molecular farming relies on expression vectors that allow high yields of recombinant proteins to be produced through transient gene expression. While numerous expression vectors currently exist for this purpose, there are very few examples of systematic efforts to improve upon these. Moreover, the current generation of expression systems makes use of naturally-occurring regulatory elements, typically selected from plant viruses, to maximise yields. This study aims to use rational design to generate synthetic sequences that can rival existing ones.ResultsIn this work, we present the rational design of novel synthetic 5′ and 3′ untranslated regions (UTRs) which can be used in various combinations to modulate accumulation levels of transiently-expressed recombinant proteins. Using the pEAQ-HT expression vector as a point of comparison, we show that pre-existing expression systems can be improved by the deployment of rationally designed synthetic UTRs. Notably, we show that a suite of short, synthetic 5′UTRs behave as expression enhancers that outperform the HT 5′UTR present in the CPMV-HT expression system. Furthermore, we confirm the critical role played by the 3′UTR of cowpea mosaic virus RNA-2 in the performance of the CPMV-HT system. Finally, we use the knowledge obtained from these results to develop novel expression vectors (named pHRE and pHREAC) that equal or outperform pEAQ-HT in terms of recombinant protein yield. These new vectors are also domesticated for the use of certain Type IIS restriction enzymes, which allows for quicker cloning and straightforward assessment of different combinations of UTRs.ConclusionsWe have shown that it is possible to rationally design a suite of expression modulators in the form of synthetic UTRs. We have created novel expression vectors that allow very high levels of recombinant protein expression in a transient expression context. This will have important consequences for future efforts to develop ever-better plant transient overexpression vectors for research or industrial applications.

Highly efficient construction of infectious viroid-derived clones

BackgroundViroid research generally relies on infectious cDNA clones that consist of dimers of the entire viroid sequence. At present, those dimers are generated by self-ligation of monomeric cDNA, a strategy that presents several disadvantages: (i) low efficiency, (ii) it is a non-oriented reaction requiring tedious screenings and (iii) additional steps are required for cloning into a binary vector for agroinfiltration or for in vitro RNA production.ResultsWe have developed a novel strategy for simultaneous construction of a viroid dimeric cDNA and cloning into a multipurpose binary vector ready for agroinfiltration or in vitro transcription. The assembly is based on IIs restriction enzymes and positive selection and supposes a universal procedure for obtaining infectious clones of a viroid independently of its sequence, with a high efficiency. Thus, infectious clones of one viroid of each family were obtained and its infectivity was analyzed by molecular hybridization.ConclusionThis is a zero-background strategy for direct cloning into a binary vector, optimized for the generation of infectious viroids. As a result, this methodology constitutes a powerful tool for viroid research and exemplifies the applicability of type IIs restriction enzymes and the lethal gene ccdB to design efficient and affordable direct cloning approaches of PCR products into binary vectors.

Rapid Assembly of gRNA Arrays via Modular Cloning in Yeast.

CRISPR is a versatile technology for genomic editing and regulation, but the expression of multiple gRNAs in S. cerevisiae has thus far been limited. We present here a simple extension to the Yeast MoClo Toolkit, which enables the rapid assembly of gRNA arrays using a minimal set of parts. Using a dual-PCR, Type IIs restriction enzyme Golden Gate assembly approach, at least 12 gRNAs can be assembled and expressed from a single transcriptional unit. We demonstrate that these gRNA arrays can stably regulate gene expression in a synergistic manner via dCas9-mediated repression. This approach expands the number of gRNAs that can be expressed in this model organism and may enable the versatile editing or transcriptional regulation of a greater number of genes in vivo.

Loop assembly: a simple and open system for recursive fabrication of DNA circuits.

High-efficiency methods for DNA assembly have enabled the routine assembly of synthetic DNAs of increased size and complexity. However, these techniques require customization, elaborate vector sets or serial manipulations for the different stages of assembly. We have developed Loop assembly based on a recursive approach to DNA fabrication. The system makes use of two Type IIS restriction endonucleases and corresponding vector sets for efficient and parallel assembly of large DNA circuits. Standardized level 0 parts can be assembled into circuits containing 1, 4, 16 or more genes by looping between the two vector sets. The vectors also contain modular sites for hybrid assembly using sequence overlap methods. Loop assembly enables efficient and versatile DNA fabrication for plant transformation. We show the construction of plasmids up to 16 genes and 38kb with high efficiency (>80%). We have characterized Loop assembly on over 200 different DNA constructs and validated the fidelity of the method by high-throughput Illumina plasmid sequencing. Our method provides a simple generalized solution for DNA construction with standardized parts. The cloning system is provided under an OpenMTA license for unrestricted sharing and open access.

A Bacterial Expression Vector Archive (BEVA) for Flexible Modular Assembly of Golden Gate-Compatible Vectors.

We present a Bacterial Expression Vector Archive (BEVA) for the modular assembly of bacterial vectors compatible with both traditional and Golden Gate cloning, utilizing the Type IIS restriction enzyme Esp3I, and have demonstrated its use for Golden Gate cloning in Escherichia coli. Ideal for synthetic biology and other applications, this modular system allows a rapid, low-cost assembly of new vectors tailored to specific tasks. Using the principles outlined here, new modules (e.g., origin of replication for plasmids in other bacteria) can easily be designed for specific applications. It is hoped that this vector construction system will be expanded by the scientific community over time by creation of novel modules through an open source approach. To demonstrate the potential of the system, three example vectors were constructed and tested. The Golden Gate level 1 vector pOGG024 (pBBR1-based broad-host range and medium copy number) was used for gene expression in laboratory-cultured Rhizobium leguminosarum. The Golden Gate level 1 vector pOGG026 (RK2-based broad-host range, lower copy number and stable in the absence of antibiotic selection) was used to demonstrate bacterial gene expression in nitrogen-fixing nodules on pea plant roots formed by R. leguminosarum. Finally, the level 2 cloning vector pOGG216 (RK2-based broad-host range, medium copy number) was used to construct a dual reporter plasmid expressing green and red fluorescent proteins.

Assembly of Complex Pathways Using Type IIs Restriction Enzymes.

Efficient DNA assembly methods are essential tools for synthetic biology and metabolic engineering. Among several recently developed methods that allow assembly of multiple DNA fragments in a single step, DNA assembly using type IIS enzymes provides many advantages for complex pathway engineering. In particular, it provides the ability for the user to quickly assemble multigene constructs using a series of simple one-pot assembly steps starting from libraries of cloned and sequenced parts. We describe here a protocol for assembly of multigene constructs using the modular cloning system (MoClo). Making constructs using the MoClo system requires to first define the structure of the final construct to identify all basic parts and vectors required for the construction strategy. Basic parts that are not yet available need to be made. Multigene constructs are then assembled using a series of one-pot assembly steps with the set of identified parts and vectors.

Comprehensive Profiling of Four Base Overhang Ligation Fidelity by T4 DNA Ligase and Application to DNA Assembly.

Synthetic biology relies on the manufacture of large and complex DNA constructs from libraries of genetic parts. Golden Gate and other Type IIS restriction enzyme-dependent DNA assembly methods enable rapid construction of genes and operons through one-pot, multifragment assembly, with the ordering of parts determined by the ligation of Watson-Crick base-paired overhangs. However, ligation of mismatched overhangs leads to erroneous assembly, and low-efficiency Watson Crick pairings can lead to truncated assemblies. Using sets of empirically vetted, high-accuracy junction pairs avoids this issue but limits the number of parts that can be joined in a single reaction. Here, we report the use of comprehensive end-joining ligation fidelity and bias data to predict high accuracy junction sets for Golden Gate assembly. The ligation profile accurately predicted junction fidelity in ten-fragment Golden Gate assembly reactions and enabled accurate and efficient assembly of a lac cassette from up to 24-fragments in a single reaction.

CRISPR Guide RNA Cloning for Mammalian Systems.

The outlined protocol describes streamlined methods for the efficient and cost-effective generation of Cas9-associated guide RNAs. Two alternative strategies for guide RNA (gRNA) cloning are outlined based on the usage of the Type IIS restriction enzyme BsmBI in combination with a set of compatible vectors. Outside of the access to Sanger sequencing services to validate the generated vectors, no special equipment or reagents are required aside from those that are standard to modern molecular biology laboratories. The outlined method is primarily intended for cloning one single gRNA or one paired gRNA-expressing vector at a time. This procedure does not scale well for the generation of libraries containing thousands of gRNAs. For those purposes, alternative sources of oligonucleotide synthesis such as oligo-chip synthesis are recommended. Finally, while this protocol focuses on a set of mammalian vectors, the general strategy is plastic and is applicable to any organism if the appropriate gRNA vector is available.

CRISPR Guide RNA Cloning for Mammalian Systems

The outlined protocol describes streamlined methods for the efficient and cost-effective generation of Cas9-associated guide RNAs. Two alternative strategies for guide RNA (gRNA) cloning are outlined based on the usage of the Type IIS restriction enzyme BsmBI in combination with a set of compatible vectors. Outside of the access to Sanger sequencing services to validate the generated vectors, no special equipment or reagents are required aside from those that are standard to modern molecular biology laboratories. The outlined method is primarily intended for cloning one single gRNA or one paired gRNA-expressing vector at a time. This procedure does not scale well for the generation of libraries containing thousands of gRNAs. For those purposes, alternative sources of oligonucleotide synthesis such as oligo-chip synthesis are recommended. Finally, while this protocol focuses on a set of mammalian vectors, the general strategy is plastic and is applicable to any organism if the appropriate gRNA vector is available.

Abstract LB-195: Identifying cooperative effects of tumor suppressor gene mutations in lung adenocarcinoma using paired CRISPR-Cas9

Abstract Cancer is a heterogeneous disease that arises from the accumulation of genetic mutations that lead to a loss of tumor suppressor genes and activation of oncogenes. Mutational inactivation of genes that regulate epigenetic mechanisms, such as post translational modifications to DNA and histones, also contribute to cancer progression but the mechanisms are poorly understood. Trimethylation on histone 3 lysine 36 (H3K36me3) is encoded by the histone lysine methyltransferase (SETD2). SETD2 is recurrently inactivated by missense and frameshift mutations in multiple tumor types. Previously, we identified that Setd2 loss has potent tumor promoting activities in a mouse model of oncogenic Kras-induced lung adenocarcinoma. However, whether Setd2 loss has cooperating effects with other tumor suppressor gene mutations remains unstudied. To simultaneously inactivate distinct tumor suppressor genes, we use a lentiviral-based CRISPR/Cas gene editing approach to express a combination of specific gRNA-pairs along with Cas9 and Cre recombinase. Inhalation of these lentiviral particles leads activation of an oncogenic KrasLSL-G12D allele and simultaneously inactivation two gRNA-targeted genes. We hypothesize that SETD2 will collaborate with other tumor suppressor gene mutations in lung adenocarcinoma. To clone lentivirus vectors that have two different gRNA we use oligonucleotides encoding gRNAs targeting Setd2 and either Lkb1, Apc, or Rb1 to PCR amplify the 3' region of the murine U6 (mU6) promoter and the 5' region of the gRNA scaffold. Overlapping sequences in the 148-bp PCR amplicon, facilitate recombination with a 415-bp donor fragment derived from BbsI-digested pDonor plasmid using the Gibson cloning method. The newly circularized fragment is then re-linearized via BbsI digestion and cloned into LentiCRISPRv2Cre vector through the Golden Gate method using BsmBI type IIs restriction endonuclease and T4 DNA ligase. Our data demonstrate the development and presence of dual gRNA nucleotides through NotI/EcoRI restriction enzymes digestion and DNA Sequencing. Moreover, to study the cooperative effects of these mutations in mice, we created viruses and corroborated through Flow cytometry and Fluorescence microscopy. In conclusion, we generate lentiviral particles expressing pairs of gRNAs targeting distinct tumor suppressor genes, to identify cooperative effects of their mutation in lung adenocarcinoma models. Citation Format: Mabel G. Perez-Oquendo, David M. Feldser, David Walter. Identifying cooperative effects of tumor suppressor gene mutations in lung adenocarcinoma using paired CRISPR-Cas9 [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2018; 2018 Apr 14-18; Chicago, IL. Philadelphia (PA): AACR; Cancer Res 2018;78(13 Suppl):Abstract nr LB-195.

A uniform cloning platform for mycobacterial genetics and protein production

Molecular research on mycobacteria relies on a multitude of tools for the genetic manipulation of these clinically important bacteria. However, a uniform set of vectors allowing for standardized cloning procedures is not available. Here, we developed a versatile series of mycobacterial vectors for gene deletion, complementation and protein production and purification. The vectors are compatible with fragment exchange (FX) cloning, a recently developed high-throughput cloning principle taking advantage of the type IIS restriction enzyme SapI and its capacity to generate sticky trinucleotide ends outside of its recognition sequence. FX cloning allows for the efficient cloning into an entry vector and the facile transfer of the sequenced insert into a variety of destination vectors. We generated a set of mycobacterial expression vectors spanning a wide range of expression strengths, tagging variants and selection markers to rapidly screen for the optimal expression construct in order to purify membrane proteins from the model organism Mycobacterium smegmatis. Further, we generated a series of suicide vectors containing two counterselection markers and used them to delete twenty genes encoding for potential drug efflux pumps in M. smegmatis. The vectors will further facilitate genetic and biochemical research on various mycobacterial species.

Development of Versatile Vectors for Heterologous Expression in Bacillus.

The discovery of new enzymes for industrial application relies on a robust discovery pipeline. Such a pipeline should facilitate efficient molecular cloning, recombinant expression and functional screening procedures. Previously, we have developed a vector set for heterologous expression in Escherichia coli. Here, we supplement the catalogue with vectors for expression in Bacillus. The vectors are made compatible with a versatile cloning procedure based on type IIS restriction enzymes and T4 DNA ligase, and encompass an effective counter-selection procedure and complement the set of vectors with options for secreted expression. We validate the system with expression of recombinant subtilisins, which are generally challenging to express in a heterologous system. The complementarity of the E. coli and Bacillus systems allows rapid switching between the two commonly used hosts without comprehensive intermediate cloning steps. The vectors described are not limited to the expression of certain enzymes, but could also be applied for the expression of other enzymes for more generalized enzyme discovery or development.

Peripheral infrastructure vectors and an extended set of plant parts for the Modular Cloning system.

Standardized DNA assembly strategies facilitate the generation of multigene constructs from collections of building blocks in plant synthetic biology. A common syntax for hierarchical DNA assembly following the Golden Gate principle employing Type IIs restriction endonucleases was recently developed, and underlies the Modular Cloning and GoldenBraid systems. In these systems, transcriptional units and/or multigene constructs are assembled from libraries of standardized building blocks, also referred to as phytobricks, in several hierarchical levels and by iterative Golden Gate reactions. Here, a toolkit containing further modules for the novel DNA assembly standards was developed. Intended for use with Modular Cloning, most modules are also compatible with GoldenBraid. Firstly, a collection of approximately 80 additional phytobricks is provided, comprising e.g. modules for inducible expression systems, promoters or epitope tags. Furthermore, DNA modules were developed for connecting Modular Cloning and Gateway cloning, either for toggling between systems or for standardized Gateway destination vector assembly. Finally, first instances of a “peripheral infrastructure” around Modular Cloning are presented: While available toolkits are designed for the assembly of plant transformation constructs, vectors were created to also use coding sequence-containing phytobricks directly in yeast two hybrid interaction or bacterial infection assays. The presented material will further enhance versatility of hierarchical DNA assembly strategies.

Single Day Construction of Multigene Circuits with 3G Assembly.

The ability to rapidly design, build, and test prototypes is of key importance to every engineering discipline. DNA assembly often serves as a rate limiting step of the prototyping cycle for synthetic biology. Recently developed DNA assembly methods such as isothermal assembly and type IIS restriction enzyme systems take different approaches to accelerate DNA construction. We introduce a hybrid method, Golden Gate-Gibson (3G), that takes advantage of modular part libraries introduced by type IIS restriction enzyme systems and isothermal assembly's ability to build large DNA constructs in single pot reactions. Our method is highly efficient and rapid, facilitating construction of entire multigene circuits in a single day. Additionally, 3G allows generation of variant libraries enabling efficient screening of different possible circuit constructions. We characterize the efficiency and accuracy of 3G assembly for various construct sizes, and demonstrate 3G by characterizing variants of an inducible cell-lysis circuit.