Type II Restriction Enzymes Research Articles

A Simple Whole-Plasmid PCR Method to Construct High-Diversity Synthetic Phage Display Libraries

Phage display technology utilises peptide and antibody libraries with very high diversities to select ligands with specific binding properties. The production of such libraries can be labour intensive and technically challenging and whilst there are commercial sources of libraries, the exploitation of the resulting binders is constrained by ownership of the libraries. Here, a peptide library of ~ 1 × 109 variants for display on gene VIII was produced alongside three VHH antibody libraries with similar diversity, where 12mer, 16mer or 21mer CDR3s were introduced into the highly stable cAbBCII10 scaffold displayed on gene III. The cloning strategy used a simple whole-plasmid PCR method and type IIS restriction enzyme assembly that facilitate the seamless insertion of diversity into any suitable phage coat protein or antibody scaffold. This method reproducibly produced 1 × 109 variants from just 10 transformations and the four libraries had relatively low bias with 82 to 86% of all sequences present as single copies. The functionality of both peptide and antibody libraries were demonstrated by selection of ligands with specific binding properties by biopanning. The peptide library was used to epitope map a monoclonal antibody. The VHH libraries were pooled and used to select an antibody to recombinant human collagen type 1.

Construction of Multiple Guide RNAs in CRISPR/Cas9 Vector Using Stepwise or Simultaneous Golden Gate Cloning: Case Study for Targeting the FAD2 and FATB Multigene in Soybean.

CRISPR/Cas9 is a commonly used technique in reverse-genetics research to knock out a gene of interest. However, when targeting a multigene family or multiple genes, it is necessary to construct a vector with multiple single guide RNAs (sgRNAs) that can navigate the Cas9 protein to the target site. In this protocol, the Golden Gate cloning method was used to generate multiple sgRNAs in the Cas9 vector. The vectors used were pHEE401E_UBQ_Bar and pBAtC_tRNA, which employ a one-promoter/one-sgRNA and a polycistronic-tRNA-gRNA strategy, respectively. Golden Gate cloning was performed with type IIS restriction enzymes to generate gRNA polymers for vector inserts. Four sgRNAs containing the pHEE401E_UBQ_Bar vector and four to six sgRNAs containing the pBAtC_tRNA vector were constructed. In practice, we constructed multiple sgRNAs targeting multiple genes of FAD2 and FATB in soybean using this protocol. These three vectors were transformed into soybeans using the Agrobacterium-mediated method. Using deep sequencing, we confirmed that the T0 generation transgenic soybean was edited at various indel ratios in the predicted target regions of the FAD2 and FATB multigenes. This protocol is a specific guide that allows researchers to easily follow the cloning of multiple sgRNAs into commonly used CRISPR/Cas9 vectors for plants.

Intron-containing hairpin RNA interference vector for OBP8 show promising mortality in peach potato aphid

Myzus persicae is a devastating pest affecting potato production. Intron-containing hairpin RNA (ihpRNA) silenced the odorant-binding protein 8 (OBP8) for enhanced protection against Myzus persicae in potatoes. OBP8 was isolated from M. persicae, sequenced, with the allotment of GenBank ID. ERNAi was used to design siRNA targets from OBP8 with no off-targets. Multiple Sequence Alignment show M. persicae OBP8 resemblance with Acyrthosiphon pisum, Rhopalosiphum maidis, Aphis fabae, and Sitobion avenae. dsRNA-OBP8 (7 µg/µL) oral feeding resulted in a 69% mortality, and 58% OBP8 reduced expression 8D post-feeding compared to control. Golden Gate cloning is used for RNA interference taking advantage of type IIs restriction enzyme Eco31I. ihpRNA-OBP8 introduced by agroinfiltration in Solanum tuberosum. Transgenic S. tuberosum fed Myzus show 57.6% mortality and 49% reduction in OBP8 expression 8D post-feeding, compared to control. This work proves OBP8 as promising ihpRNA targets in potato and related crops for whom Myzus is a destructive pest.

Construction of Sedoheptulose-1,7-Bisphosphatase (Sbpase) for Manipulation in Guard Cells of Arabidopsis thaliana L.

Guard cells control the stomata through which exchange of gas takes place in plants by balancing between CO2 uptake for photosynthesis and water loss through transpiration leading to ultimate plant water use efficiency (WUE). Due to climate change, sustainable agriculture will therefore require a major reduction in plant water use hence stomata have become potential target for manipulation. Understanding the signal mechanisms of stomata is therefore critically important in facilitating an understanding of stomatal regulation. The use of molecular tools and techniques to manipulate chloroplast metabolism specifically in the guard cells are needed to elucidate signals associated with stomatal behaviour towards crop improvement. Ability to assemble multiple or complex DNA molecules containing large number of genetic elements is an essential part of genetic engineering and in order to understand the involvement of guard cell photosynthesis in stomatal function, genetic manipulation of photosynthetic enzymes specifically in guard cells is necessary. This study employed the manipulation and construction of the enzyme Sedoheptulose-1,7-Bisphosphatase (SBpase) by using the golden gate cloning technique and the bioinformatics system- geneious. Constructs were designed to alter expression of the SBPase gene in a cell specific manner driven by the guard cell promoter KST1 in the model plant Arabidopsis thaliana L. The construct design for the sense plasmid vectors allowed efficient assembly of multiple DNA fragments in a single reaction based on the type IIs restriction enzyme. The potentials of manipulating guard cell specific metabolism are therefore enormous and the increase or decrease of photosynthetic genes could be assessed and their impacts on plant development documented accordingly.

A systematic method for DNA fragment amplification and sequencing based on DNA indexing technology. Protocol and technical considerations.

DNA indexing is based on a presynthesized library of oligonucleotide adaptors (256 in total), named indexers, and type-IIS restriction endonucleases. It enables amplification and direct analysis of large DNA fragments with low overall redundancy and without subcloning. Here, we describe a detailed protocol for PCR-based amplification of DNA fragments followed by DNA sequencing by indexer walking and provide helpful hints on its practical use. The proposed protocol can be applied to the sequencing of plasmids, cDNA clones, and longer DNA fragments. It can also be used for gap filling at the final stage of genome sequencing projects.

Rapid Assembly of Multi-Gene Constructs using Modular Golden Gate Cloning.

The Golden Gate cloning method enables the rapid assembly of multiple genes in any user-defined arrangement. It utilizes type IIS restriction enzymes that cut outside of their recognition sites and create a short overhang. This modular cloning (MoClo) system uses a hierarchical workflow in which different DNA parts, such as promoters, coding sequences (CDS), and terminators, are first cloned into an entry vector. Multiple entry vectors then assemble into transcription units. Several transcription units then connect into a multi-gene plasmid. The Golden Gate cloning strategy is of tremendous advantage because it allows scar-less, directional, and modular assembly in a one-pot reaction. The hierarchical workflow typically enables the facile cloning of a large variety of multi-gene constructs with no need for sequencing beyond entry vectors. The use of fluorescent protein dropouts enables easy visual screening. This work provides a detailed, step-by-step protocol for assembling multi-gene plasmids using the yeast modular cloning (MoClo) kit. We show optimal and suboptimal results of multi-gene plasmid assembly and provide a guide for screening for colonies. This cloning strategy is highly applicable for yeast metabolic engineering and other situations in which multi-gene plasmid cloning is required.

Joint universal modular plasmids (JUMP): a flexible vector platform for synthetic biology.

Generation of new DNA constructs is an essential process in modern life science and biotechnology. Modular cloning systems based on Golden Gate cloning, using Type IIS restriction endonucleases, allow assembly of complex multipart constructs from reusable basic DNA parts in a rapid, reliable and automation-friendly way. Many such toolkits are available, with varying degrees of compatibility, most of which are aimed at specific host organisms. Here, we present a vector design which allows simple vector modification by using modular cloning to assemble and add new functions in secondary sites flanking the main insertion site (used for conventional modular cloning). Assembly in all sites is compatible with the PhytoBricks standard, and vectors are compatible with the Standard European Vector Architecture (SEVA) as well as BioBricks. We demonstrate that this facilitates the construction of vectors with tailored functions and simplifies the workflow for generating libraries of constructs with common elements. We have made available a collection of vectors with 10 different microbial replication origins, varying in copy number and host range, and allowing chromosomal integration, as well as a selection of commonly used basic parts. This design expands the range of hosts which can be easily modified by modular cloning and acts as a toolkit which can be used to facilitate the generation of new toolkits with specific functions required for targeting further hosts.

A detection method for the capture of genomic signatures: From disease diagnosis to genome editing.

Variations in the genetic information originate from errors during DNA replication, error-prone repair of DNA damages, or genome editing. The most common approach to detect changes in DNA sequences employs sequencing technologies. However, they remain expensive and time-consuming, limiting their utility for routine laboratory experiments. We recently developed DinucleoTidE Signature CapTure (DTECT). DTECT is a marker-free and versatile detection method that captures targeted dinucleotide signatures resulting from the digestion of genomic amplicons by the type IIS restriction enzyme AcuI. Here, we describe the DTECT protocol to identify mutations introduced by CRISPR-based precision genome editing technologies or resulting from genetic variation. DTECT enables accurate detection of mutations using basic laboratory equipment and off-the-shelf reagents with qualitative or quantitative capture of signatures.

SpEDIT: A fast and efficient CRISPR/Cas9 method for fission yeast.

The CRISPR/Cas9 system allows scarless, marker-free genome editing. Current CRISPR/Cas9 systems for the fission yeast Schizosaccharomyces pomberely on tedious and time-consuming cloning procedures to introduce a specific sgRNA target sequence into a Cas9-expressing plasmid. In addition, Cas9 endonuclease has been reported to be toxic to fission yeast when constitutively overexpressed from the strong adh1promoter. To overcome these problems we have developed an improved system, SpEDIT, thatuses a synthesised Cas9 sequencecodon-optimised for S. pombeexpressed from the medium strength adh15promoter.The SpEDITsystem exhibits a flexible modular design where the sgRNA is fused to the 3' end of the self-cleaving hepatitis delta virus (HDV) ribozyme, allowing expression of the sgRNA cassette to be driven by RNA polymerase III from a tRNA gene sequence.Lastly, the inclusion of sites for the BsaI type IIS restriction enzyme flanking a GFP placeholder enables one-step Golden Gate mediated replacement of GFP with synthesized sgRNAs for expression. The SpEDITsystem allowed a 100% mutagenesis efficiency to be achieved when generating targeted pointmutants in the ade6 + or ura4 +genes by transformation of cells from asynchronous cultures. SpEDITalso permitted insertion, tagging and deletion events to be obtained with minimal effort. Simultaneous editing of two independent non-homologous loci was also readily achieved. Importantly the SpEDITsystem displayed reduced toxicity compared to currently available S. pombeediting systems. Thus, SpEDITprovides an effective and user-friendly CRISPR/Cas9 procedure that significantly improves the genome editing toolbox for fission yeast.

A bicistronic vector backbone for rapid seamless cloning and chimerization of αβT-cell receptor sequences.

To facilitate preclinical testing of T-cell receptors (TCRs) derived from tumor-reactive T-cell clones it is necessary to develop convenient and rapid cloning strategies for the generation of TCR expression constructs. Herein, we describe a pDONR™221 vector backbone allowing to generate Gateway™ compatible entry clones encoding optimized bicistronic αβTCR constructs. It harbors P2A-linked TCR constant regions and head-to-head-oriented recognition sites of the Type IIS restriction enzymes BsmBI and BsaI for seamless cloning of the TCRα and TCRβ V(D)J regions, respectively. Additional well-established TCR optimizations were incorporated to enhance TCR functionality. This included replacing of the human αβTCR constant regions with their codon-optimized murine counterparts for chimerization, addition of a second interchain disulfide bond and arrangement of the TCR chains in the order β-P2A-α. We exemplified the utility of our vector backbone by cloning and functional testing of three melanoma-reactive TCRs in primary human T cells.

Enabling one-pot Golden Gate assemblies of unprecedented complexity using data-optimized assembly design.

DNA assembly is an integral part of modern synthetic biology, as intricate genetic engineering projects require robust molecular cloning workflows. Golden Gate assembly is a frequently employed DNA assembly methodology that utilizes a Type IIS restriction enzyme and a DNA ligase to generate recombinant DNA constructs from smaller DNA fragments. However, the utility of this methodology has been limited by a lack of resources to guide experimental design. For example, selection of the DNA sequences at fusion sites between fragments is based on broad assembly guidelines or pre-vetted sets of junctions, rather than being customized for a particular application or cloning project. To facilitate the design of robust assembly reactions, we developed a high-throughput DNA sequencing assay to examine reaction outcomes of Golden Gate assembly with T4 DNA ligase and the most commonly used Type IIS restriction enzymes that generate three-base and four-base overhangs. Next, we incorporated these findings into a suite of webtools that design assembly reactions using the experimental data. These webtools can be used to create customized assemblies from a target DNA sequence or a desired number of fragments. Lastly, we demonstrate how using these tools expands the limits of current assembly systems by carrying out one-pot assemblies of up to 35 DNA fragments. Full implementation of the tools developed here enables direct expansion of existing assembly standards for modular cloning systems (e.g. MoClo) as well as the formation of robust new high-fidelity standards.

SEVA 3.1: enabling interoperability of DNA assembly among the SEVA, BioBricks and Type IIS restriction enzyme standards.

SummaryRobust synthetic biology applications rely heavily on the design and assembly of DNA parts with specific functionalities based on engineering principles. However, the assembly standards adopted by different communities vary considerably, thus limiting the interoperability of parts, vectors and methods. We hereby introduce the SEVA 3.1 platform consisting of the SEVA 3.1 vectors and the Golden Gate‐based ‘SevaBrick Assembly’. This platform enables the convergence of standard processes between the SEVA platform, the BioBricks and the Type IIs‐mediated DNA assemblies to reduce complexity and optimize compatibility between parts and methods. It features a wide library of cloning vectors along with a core set of standard SevaBrick primers that allow multipart assembly and exchange of short functional genetic elements (promoters, RBSs) with minimal cloning and design effort. As proof of concept, we constructed, among others, multiple sfGFP expression vectors under the control of eight RBSs, eight promoters and four origins of replication as well as an inducible four‐gene operon expressing the biosynthetic genes for the black pigment proviolacein. To demonstrate the interoperability of the SEVA 3.1 vectors, all constructs were characterized in both Pseudomonas putida and Escherichia coli. In summary, the SEVA 3.1 platform optimizes compatibility and modularity of inserts and backbones with a cost‐ and time‐friendly DNA assembly method, substantially expanding the toolbox for successful synthetic biology applications in Gram‐negative bacteria.

GoldenBac: a simple, highly efficient, and widely applicable system for construction of multi-gene expression vectors for use with the baculovirus expression vector system

BackgroundRecombinant protein production and purification of large protein complexes in eukaryotes requires efficient methods to generate multi-gene expression constructs, where each individual gene is under the control of its own promoter and terminator. Current methods are based either on serial rounds of combination of several vectors containing loxP sites via the Cre-lox technology, or on multiple rounds of gene combination via PCR or other methods. These methods are multi-step, have lower efficiencies than single gene cloning, and may require laborious processes to verify that all genes of interest are present in the final product. Here, we describe a rapid and simple Golden Gate-based system for the generation of multi-gene expression constructs compatible with baculovirus expression vector systems (BEVS) using either Tn7 transposition or KO1629-based homologous recombination, which we refer to as “GoldenBac”.ResultsThis method is based on the construction of a series of vectors containing a promoter-gene of interest-terminator cassette flanked by cleavage sites of the BsaI type IIS restriction enzyme. This series of vectors can be cut by BsaI to excise cassettes with unique overhangs. In the same reaction, the cassettes are then ligated in the correct sequence in a final destination vector to generate multi-gene expression constructs containing 2–15 genes. Individual expression constructs can therefore be combined into a single vector in a single reaction, with over 90% efficiency when combining up to 14 expression cassettes. We demonstrate successful construction and expression of three different co-expression systems, the proteosomal lid complex, the anaphase promoting complex/cyclosome (APC/C), and a series of constructs used to test the effect of chaperone co-expression on the solubility of the HOIP protein.ConclusionsThis robust, single-step cloning system provides an easy-to-use method for generation of multi-gene expression constructs for both transposition and homologous recombination-based baculovirus systems, making this technology available across all laboratories using baculovirus expression systems. This highly efficient and simple method allows for rapid incorporation of multi-gene expression cloning into the standardized service portfolio of protein production facilities and can also easily be adopted by any laboratory for routine generation of multi-gene baculovirus constructs.

Multigene Engineering by GoldenBraid Cloning: From Plants to Filamentous Fungi and Beyond.

Many synthetic biologists have adopted methods based on Type IIS restriction enzymes and Golden Gate technology in their cloning procedures, as these enable the combinatorial assembly of modular elements in a very efficient way following standard rules. GoldenBraid (GB) is a Golden Gate-based modular cloning system that, in addition, facilitates the engineering of large multigene constructs and the exchange of DNA parts as result of its iterative cloning scheme. GB was initially developed specifically for plant synthetic biology, and it has been subsequently extended and adapted to other organisms such as Saccharomyces cerevisiae, filamentous fungi, and human cells by incorporating a number of host-specific features into its basic scheme. Here we describe the general GB cloning procedure and provide detailed protocols for its adaptation to filamentous fungi-a GB variant known as FungalBraid. The assembly of a cassette for gene disruption by homologous recombination, a fungal-specific extension of the GB utility, is also shown. Development of FungalBraid was relatively straightforward, as both plants and fungi can be engineered using the same binary plasmids via Agrobacterium-mediated transformation. We also describe the use of a set of web-based tools available at the GB website that assist users in all cloning procedures. The availability of plant and fungal versions of GB will facilitate genetic engineering in these industrially relevant organisms. © 2020 by John Wiley & Sons, Inc. Basic Protocol 1: Software-assisted modular DNA assembly of a two gene expression-cassette with GB Basic Protocol 2: Agrobacterium tumefaciens-mediated transformation of filamentous fungi Basic Protocol 3: Software-assisted modular DNA assembly of a gene disruption-cassette using GB Basic Protocol 4: Obtaining disruption transformants.

Synthetic DNA Assembly Using Golden Gate Cloning and the Hierarchical Modular Cloning Pipeline.

Methods that enable the construction of recombinant DNA molecules are essential tools for biological research and biotechnology. Golden Gate cloning is used for assembly of multiple DNA fragments in a defined linear order in a recipient vector using a one-pot assembly procedure. Golden Gate cloning is based on the use of a type IIS restriction enzyme for digestion of the DNA fragments and vector. Because restriction sites for the type IIS enzyme used for assembly must be present at the ends of the DNA fragments and vector but absent from all internal sequences, special care must be taken to prepare DNA fragments and the recipient vector with a structure suitable for assembly by Golden Gate cloning. In this article, protocols are presented for preparation of DNA fragments, modules, and vectors suitable for Golden Gate assembly cloning. Additional protocols are presented for assembly of defined parts in a transcription unit, as well as the stitching together of multiple transcription units into multigene constructs by the modular cloning (MoClo) pipeline. © 2020 The Authors. Basic Protocol 1: Performing a typical Golden Gate cloning reaction Basic Protocol 2: Accommodating a vector to Golden Gate cloning Basic Protocol 3: Accommodating an insert to Golden Gate cloning Basic Protocol 4: Generating small standardized parts compatible with hierarchical modular cloning (MoClo) using level 0 vectors Alternate Protocol: Generating large standardized parts compatible with hierarchical modular cloning (MoClo) using level -1 vectors Basic Protocol 5: Assembling transcription units and multigene constructs using level 1, M, and P MoClo vectors.

Detection of Marker-Free Precision Genome Editing and Genetic Variation through the Capture of Genomic Signatures

SUMMARYGenome editing technologies have transformed our ability to engineer desired genomic changes within living systems. However, detecting precise genomic modifications often requires sophisticated, expensive, and time-consuming experimental approaches. Here, we describe DTECT (Dinucleotide signaTurE CapTure), a rapid and versatile detection method that relies on the capture of targeted dinucleotide signatures resulting from the digestion of genomic DNA amplicons by the type IIS restriction enzyme AcuI. DTECT enables the accurate quantification of marker-free precision genome editing events introduced by CRISPR-dependent homology-directed repair, base editing, or prime editing in various biological systems, such as mammalian cell lines, organoids, and tissues. Furthermore, DTECT allows the identification of oncogenic mutations in cancer mouse models, patient-derived xenografts, and human cancer patient samples. The ease, speed, and cost efficiency by which DTECT identifies genomic signatures should facilitate the generation of marker-free cellular and animal models of human disease and expedite the detection of human pathogenic variants.

A simple and efficient cloning system for CRISPR/Cas9-mediated genome editing in rice.

Rapidly growing genetics and bioinformatics studies provide us with an opportunity to obtain a global view of the genetic basis of traits, but also give a challenge to the function validation of candidate genes. CRISPR/Cas9 is an emerging and efficient tool for genome editing. To construct expression clones for the CRISPR/Cas9, most current methods depend on traditional cloning using Gateway reaction or specific type IIS restriction enzymes and DNA ligation, based on multiple steps of PCR. We developed a system for introducing sgRNA expression cassette(s) directly into plant binary vectors in one step. In this system, one sgRNA expression cassette(s) is generated by an optimized multiplex PCR, in which an overlapping PCR took place. Whilst, two sgRNA expression cassettes were amplified in a single round of PCR. Subsequently, an LR or Golden gate reaction was set up with unpurified PCR product and befitting destination vector. We are able to construct expression clones within 36 h, which greatly improves efficiency and saves cost. Furthermore, the efficiency of this system was verified by an agrobacterium-mediated genetic transformation in rice. The system reported here provides a much more efficient and simpler procedure to construct expression clones for CRISPR/Cas9-mediated genome editing.

A One-Step Process for the Construction of Phage Display scFv and VHH Libraries.

In this work we present a one-step cloning approach for the establishment of antibody phage display libraries relying on type IIs restriction enzymes. We show that single chain variable fragment (scFv) libraries with adequate qualities can readily be cloned in a 'scar-less' manner and that the isolation of antigen-specific antibodies from immunized chickens is feasible within three selection rounds. Moreover, we demonstrate the general applicability of this method by rapidly constructing and panning VHH single domain antibody phage display libraries from immunized Llama repertoires.

Improving plant transient expression through the rational design of synthetic 5\u2032 and 3\u2032 untranslated regions

BackgroundThe growing field of plant molecular farming relies on expression vectors that allow high yields of recombinant proteins to be produced through transient gene expression. While numerous expression vectors currently exist for this purpose, there are very few examples of systematic efforts to improve upon these. Moreover, the current generation of expression systems makes use of naturally-occurring regulatory elements, typically selected from plant viruses, to maximise yields. This study aims to use rational design to generate synthetic sequences that can rival existing ones.ResultsIn this work, we present the rational design of novel synthetic 5′ and 3′ untranslated regions (UTRs) which can be used in various combinations to modulate accumulation levels of transiently-expressed recombinant proteins. Using the pEAQ-HT expression vector as a point of comparison, we show that pre-existing expression systems can be improved by the deployment of rationally designed synthetic UTRs. Notably, we show that a suite of short, synthetic 5′UTRs behave as expression enhancers that outperform the HT 5′UTR present in the CPMV-HT expression system. Furthermore, we confirm the critical role played by the 3′UTR of cowpea mosaic virus RNA-2 in the performance of the CPMV-HT system. Finally, we use the knowledge obtained from these results to develop novel expression vectors (named pHRE and pHREAC) that equal or outperform pEAQ-HT in terms of recombinant protein yield. These new vectors are also domesticated for the use of certain Type IIS restriction enzymes, which allows for quicker cloning and straightforward assessment of different combinations of UTRs.ConclusionsWe have shown that it is possible to rationally design a suite of expression modulators in the form of synthetic UTRs. We have created novel expression vectors that allow very high levels of recombinant protein expression in a transient expression context. This will have important consequences for future efforts to develop ever-better plant transient overexpression vectors for research or industrial applications.

Highly efficient construction of infectious viroid-derived clones

BackgroundViroid research generally relies on infectious cDNA clones that consist of dimers of the entire viroid sequence. At present, those dimers are generated by self-ligation of monomeric cDNA, a strategy that presents several disadvantages: (i) low efficiency, (ii) it is a non-oriented reaction requiring tedious screenings and (iii) additional steps are required for cloning into a binary vector for agroinfiltration or for in vitro RNA production.ResultsWe have developed a novel strategy for simultaneous construction of a viroid dimeric cDNA and cloning into a multipurpose binary vector ready for agroinfiltration or in vitro transcription. The assembly is based on IIs restriction enzymes and positive selection and supposes a universal procedure for obtaining infectious clones of a viroid independently of its sequence, with a high efficiency. Thus, infectious clones of one viroid of each family were obtained and its infectivity was analyzed by molecular hybridization.ConclusionThis is a zero-background strategy for direct cloning into a binary vector, optimized for the generation of infectious viroids. As a result, this methodology constitutes a powerful tool for viroid research and exemplifies the applicability of type IIs restriction enzymes and the lethal gene ccdB to design efficient and affordable direct cloning approaches of PCR products into binary vectors.