Two-dimensional Liquid Chromatography Separation Research Articles

Multidimensional capillary array liquid chromatography and matrix-assisted laser desorption/ionization tandem mass spectrometry for high-throughput proteomic analysis

A two-dimensional capillary array liquid chromatography system coupled with matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) was developed for high-throughput comprehensive proteomic analysis, in which one strong cation-exchange (SCX) capillary chromatographic column was used as the first separation dimension and 10 parallel reversed-phase liquid chromatographic (RPLC) capillary columns were used as the second separation dimension. A novel multi-channel interface was designed and fabricated for on-line coupling of the SCX to RPLC column array system. Besides the high resolution based on the combination of SCX and RPLC separation, the developed new system provided the most rapid two-dimensional liquid chromatography (2D-LC) separation. Ten three-way micro-splitter valves used as stop-and-flow switches in transferring SCX fractions onto RPLC columns. In addition, the three-way valves also acted as mixing chambers of RPLC effluent with matrix. The system enables on-line mixing of the LC array effluents with matrix solution during the elution and directly depositing the analyte/matrix mixtures on MALDI plates from the tenplexed channels in parallel through an array of capillary tips. With the novel system, thousands of peptides were well separated and deposited on MALDI plates only in 150 min for a complex proteome sample. Compared with common 2D-LC system, the parallel 2D-LC system showed about 10-times faster analytical procedure. In combination with a high throughput tandem time of flight mass spectrometry, the system was proven to be very effective for proteome analysis by analyzing a complicated sample, soluble proteins extracted from a liver cancer tissue, in which over 1202 proteins were identified.

Proteomic analysis of rat plasma by two-dimensional liquid chromatography and matrix-assisted laser desorption ionization time-of-flight mass spectrometry

The proteomic analysis of plasma and serum samples represents a formidable challenge due to the presence of a few highly abundant proteins such as albumin and immunoglobulins. Detection of low abundance protein biomarkers therefore requires either the specific depletion of high abundance proteins using immunoaffinity columns and/or optimized protein fractionation methods based on charge, size or hydrophobicity. Here we describe a two-dimensional (2D) liquid chromatography separation method for the fractionation of rat plasma. In the first dimension proteins were separated by chromatofocusing according to their isoelectric point (p I). In the second dimension, proteins were further fractionated by non-porous, reversed-phase chromatography according to their hydrophobicity. The data from both separations was displayed as a 2D protein expression map of p I versus retention time (relative hydrophobicity). Both separations were carried out on the ProteomeLab PF 2D system (Beckman Coulter), an instrument platform that provides a high degree of automation and real-time monitoring of the separation process. The reproducibility of the first-dimension separation was evaluated in terms of pH gradient formation. The second-dimension separation was evaluated in terms of peak retention times on the reversed-phase column. We found in four consecutive chromatofocusing separations that the pH gradient differed by less than 0.2 pH units at any time during the elution step. Second dimension retention times of peaks from identical p I fractions differed by less than 7 s in six consecutive separations. Each 2D separation generated a total of 540 fractions which were analyzed by matrix assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF MS). We detected approximately 275 peptides and proteins with molecular masses ranging from 3 to 225 kDa. Most fractions were found to contain multiple low and high molecular weight proteins. Differential display of 2D protein expression maps from retinol-sufficient and -deficient rat plasma samples identified a fraction with several proteins that appeared to be down-regulated in the vitamin A-deficient animal. Quantitative proteomic analysis of complex samples such as plasma is still a difficult task. We discuss the potential of this approach for biomarker discovery and address the experimental challenges that remain.

A protocol for designing comprehensive two-dimensional liquid chromatography separation systems

In this paper a protocol is proposed for establishing suitable column dimensions (length and diameters), particle sizes, flow rates, and second-dimension injection volumes (i.e. loop sizes) in comprehensive two-dimensional liquid chromatography (LC × LC). The chromatographer should select the maximum allowable first-dimension retention time, which is approximately equal to the overall analysis time. Also, (s)he should define the maximum allowable pressure in both dimensions and the (minimum) diameter of the first-dimension column. The proposed protocol provides design parameters corresponding to the ideal (theoretically optimal) conditions or to realistic practical conditions. The protocol also allowed us to study the implications of contemporary developments in LC, such as the use of high temperatures (implying reduced viscosities and increased diffusion coefficients), monolithic columns (implying smaller flow-resistance factors), and ultra-high-pressure LC. The combination of (reversed-phase or normal-phase) liquid chromatography with size-exclusion chromatography (LC × SEC) is frequently employed for analysing complex polymers. The proposed protocol is used to design a suitable LC × SEC system under realistic conditions. The results resemble the systems that have been designed and implemented by expert chromatographers, but they also indicate how current practice can be improved.

Proteome profile of human urine with two‐dimensional liquid phase fractionation

Two-dimensional liquid chromatography separation (2-DL), based on chromatofocusing for first dimension and hydrophobicity for second, can be used as a complementary method to two-dimensional gel electrophoresis (2-DE). A platform now available, ProteomeLab PF 2D provided by Beckman Coulter, (Fullerton, CA, USA), assembles these methods in automation. This system was applied to resolve large numbers of urine proteins. Reproducibility and sensitivity in protein resolution were evaluated in this study using urines collected from male blood donors. About 1000 peaks were detected at a pH range of 4.0-8.5 by applying 1 mg of proteins. Furthermore, the same fractions showing peaks with high absorbance intensities in second dimension were collected and subjected to matrix-assisted laser desorption/ionization-time of flight/mass spectrometry analysis for identification. The results showed that the 2-DL provides high reproducibility of two-dimensional protein map, and lends fractions to subsequent mass spectrometry analysis without the further need for extraction or solubilization of samples as required for spots excised from 2-DE gels. In addition, this system also allows to separate particularly proteins with 40-9 kDa molecular weight.

Ampicillin/penicillin-binding protein interactions as a model drug-target system to optimize affinity pull-down and mass spectrometric strategies for target and pathway identification

The identification and validation of the targets of active compounds identified in cell-based assays is an important step in preclinical drug development. New analytical approaches that combine drug affinity pull-down assays with mass spectrometry (MS) could lead to the identification of new targets and druggable pathways. In this work, we investigate a drug-target system consisting of ampicillin- and penicillin-binding proteins (PBPs) to evaluate and compare different amino-reactive resins for the immobilization of the affinity compound and mass spectrometric methods to identify proteins from drug affinity pull-down assays. First, ampicillin was immobilized onto various amino-reactive resins, which were compared in the ampicillin-PBP model with respect to their nonspecific binding of proteins from an Escherichia coli membrane extract. Dynal M-270 magnetic beads were chosen to further study the system as a model for capturing and identifying the targets of ampicillin, PBPs that were specifically and covalently bound to the immobilized ampicillin. The PBPs were identified, after in situ digestion of proteins bound to ampicillin directly on the beads, by using either one-dimensional (1-D) or two-dimensional (2-D) liquid chromatography (LC) separation techniques followed by tandem mass spectrometry (MS/MS) analysis. Alternatively, an elution with N-lauroylsarcosine (sarcosyl) from the ampicillin beads followed by in situ digestion and 2-D LC-MS/MS analysis identified proteins potentially interacting noncovalently with the PBPs or the ampicillin. The in situ approach required only little time, resources, and sample for the analysis. The combination of drug affinity pull-down assays with in situ digestion and 2-D LC-MS/MS analysis is a useful tool in obtaining complex information about a primary drug target as well as its protein interactors.

Multidimensional LC-LC and LC-CE for high-resolution separations of biological molecules.

In multidimensional separations, two or more independent separation methods are coupled in an effort to resolve complex mixtures. The displacement mechanisms of each method should be orthogonal, such that little correlation exists between the retention of compounds in each dimension. When multiple orthogonal separation methods are coupled such that all sample components are subjected to complete analysis on all dimensions, the method is considered "comprehensive". The primary advantage of comprehensive multidimensional separations over their one-dimensional counterparts is the potential for dramatically enhanced resolution. High resolving power can be achieved because the peak capacity of a comprehensive multidimensional separation is roughly equal to the product of the individual peak capacities of each dimension. In this review, the theory and instrumentation of two-dimensional liquid chromatography (LC-LC) and liquid chromatography-capillary electrophoresis (LC-CE) separations are discussed. Some applications of these techniques to the separation of biological molecules are highlighted. Future directions for the development of multidimensional separations are also considered.