Two-dimensional Complex Plasma Crystal Research Articles

Stability of two-dimensional complex plasma monolayers in asymmetric capacitively coupled radio-frequency discharges.

In this article, the stability of a complex plasma monolayer levitating in the sheath of the powered electrode of an asymmetric capacitively coupled radio-frequency argon discharge is studied. Compared to earlier studies, a better integration of the experimental results and theory is achieved by operating with actual experimental control parameters such as the gas pressure and the discharge power. It is shown that for a given microparticle monolayer at a fixed discharge power there exist two threshold pressures: (i) above a specific pressure p_{cryst}, the monolayer always crystallizes; (ii) below a specific pressure p_{MCI}, the crystalline monolayer undergoes the mode-coupling instability and the two-dimensional complex plasma crystal melts. In between p_{MCI} and p_{cryst}, the microparticle monolayer can be either in the fluid phase or the crystal phase: when increasing the pressure from below p_{MCI}, the monolayer remains in the fluid phase until it reaches p_{cryst} at which it recrystallizes; when decreasing the pressure from above p_{cryst}, the monolayer remains in the crystalline phase until it reaches p_{MCI} at which the mode-coupling instability is triggered and the crystal melts. A simple self-consistent sheath model is used to calculate the rf sheath profile, the microparticle charges, and the microparticle resonance frequency as a function of power and background argon pressure. Combined with calculation of the lattice modes the main trends of p_{MCI} as a function of power and background argon pressure are recovered. The threshold of the mode-coupling instability in the crystalline phase is dominated by the crossing of the longitudinal in-plane lattice mode and the out-of plane lattice mode induced by the change of the sheath profile. Ion wakes are shown to have a significant effect too.

Electric field in two-dimensional complex plasma crystal: Ideal lattices

Electric field in two-dimensional complex plasma crystal: Ideal lattices

Experimental studies of two-dimensional complex plasma crystals: waves and instabilities

A review of experimental studies on waves, phonon dispersion relations, and mode-coupling instability in two-dimensional complex plasma crystals is presented. An improved imaging method allowing simultaneous measurements of the three wave modes (compression in-plane, shear in-plane, and out-of-plane) is given. This method is used to evidence the formation of hybrid modes and the triggering of the mode-coupling instability due to wake-mediated interactions. The main stages of the mode-coupling instability are analyzed. In the early stages, synchronization of microparticle motion at the hybrid mode frequency is reported. The spatial orientation of the observed synchronization pattern correlates well with the directions of the maximal increment of the shear-free hybrid mode. When the instability is fully developed, a melting front is formed. The propagation of the melting front has similarities with flame propagation in ordinary reactive matter. Finally, it is experimentally demonstrated that an external mechanical excitation of a stable 2D complex plasma crystal can trigger the mode-coupling instability and lead to the full melting of a two-dimensional complex plasma crystal.

Experimental investigation of test particle induced micro-structural changes in a finite two-dimensional complex plasma crystal

The microstructural changes induced in a two dimensional complex plasma crystal by the movement of a single extra particle existing below it are investigated experimentally using a DC glow discharge device. The finite monolayer crystal consisting of monodispersive melamine formaldehyde particles is created in the background of an Argon plasma. The crystal formation is frequently found to be accompanied by the presence of one or more slightly heavier particles suspended a little below the monolayer. The interplay of one such test particle with the crystal is investigated for two distinct cases—(i) when the particle remains confined (trapped) in the space below the crystal and (ii) when it interacts for a short while with the crystal and then moves out of the vicinity. The trapped particle orbit induces permanent structural changes in the crystal in the form of microcracks, and these changes are identified using a variety of diagnostic analyses. The cracks can be enhanced by energizing the test particle with an incident laser. The passing particle, on the other hand, induces only transient changes in the crystal from which it is able to recover and return to its initial state in a clear demonstration of the viscoelastic property of a strongly coupled system.

Melting transition of two-dimensional complex plasma crystal in the DC glow discharge

The formation of self-consistent dust crystal and its melting is a well- known phenomenon in rf generated plasmas but remains challenging in DC glow discharge plasmas. Here, we report the melting of a two- dimensional dusty plasma crystal, suspended in the cathode sheath of a DC glow discharge plasma. The experiments are carried out in a Dusty Plasma Experimental (DPEx) device which consists of a circular powered electrode and an extended grounded cathode tray. A stationary crystal of melamine formaldehyde particles is formed in a background of Argon plasma between a pair of confining strips that are placed on the cathode. The stable structure breaks and transition to a fluid state when the neutral pressure is reduced. The neutral pressure range where this melting transition is observed is an order of magnitude less than what is typically reported in rf discharge plasma. The transition is confirmed by evaluating the variation in different characteristic parameters such as the pair correlation function, Voronoi diagram, local bond order parameter, defect fraction and dust kinetic temperature as a function of background neutral pressure. For instance, the average bond order parameter (Ψ6) reduces from 0.87 to 0.4 when the neutral pressure is reduced from 15 to 11 Pa. The asymmetry of the electrode is a special feature that is believed to enable the formation of the plasma crystal.

Tracking and Linking of Microparticle Trajectories During Mode-Coupling Induced Melting in a Two-Dimensional Complex Plasma Crystal.

In this article, a strategy to track microparticles and link their trajectories adapted to the study of the melting of a quasi two-dimensional complex plasma crystal induced by the mode-coupling instability is presented. Because of the three-dimensional nature of the microparticle motions and the inhomogeneities of the illuminating laser light sheet, the scattered light intensity can change significantly between two frames, making the detection of the microparticles and the linking of their trajectories quite challenging. Thanks to a two-pass noise removal process based on Gaussian blurring of the original frames using two different kernel widths, the signal-to-noise ratio was increased to a level that allowed a better intensity thresholding of different regions of the images and, therefore, the tracking of the poorly illuminated microparticles. Then, by predicting the positions of the microparticles based on their previous positions, long particle trajectories could be reconstructed, allowing accurate measurement of the evolution of the microparticle energies and the evolution of the monolayer properties.

Full melting of a two-dimensional complex plasma crystal triggered by localized pulsed laser heating.

The full melting of a two-dimensional plasma crystal was induced in a principally stable monolayer by localized laser stimulation. Two distinct behaviors of the crystal after laser stimulation were observed depending on the amount of injected energy: (i) below a well-defined threshold, the laser melted area recrystallized; (ii) above the threshold, it expanded outwards in a similar fashion to mode-coupling instability-induced melting, rapidly destroying the crystalline order of the whole complex plasma monolayer. The reported experimental observations are due to the fluid mode-coupling instability, which can pump energy into the particle monolayer at a rate surpassing the heat transport and damping rates in the energetic localized melted spot, resulting in its further growth. This behavior exhibits remarkable similarities with impulsive spot heating in ordinary reactive matter.

Electric field in two-dimensional complex plasma crystal: Simulated lattices

We focus on molecular dynamics simulated two-dimensional complex plasma crystals. We use rigid walls as a confinement force and produce square and rectangular crystals. We report various types of two-row crystals. The narrow and long crystals are likely to be used as wigglers; therefore, we simulate such crystals. Also, we analyze the electric fields of simulated crystals. A bit change in lattice parameters can change the internal structures of crystals and their electric fields notably. These parameters are the number of grains, grains charge, length, and width of the crystal. With the help of electric fields, we show the details of crystal structures.

Coupling of Noncrossing Wave Modes in a Two-Dimensional Plasma Crystal.

We report an experimental observation of the coupling of the transverse vertical and longitudinal in-plane dust-lattice wave modes in a two-dimensional complex plasma crystal in the absence of mode crossing. A new large-diameter rf plasma chamber was used to suspend the plasma crystal. The observations are confirmed with molecular dynamics simulations. The coupling manifests itself in traces of the transverse vertical mode appearing in the measured longitudinal spectra and vice versa. We calculate the expected ratio of the trace to the principal mode with a theoretical analysis of the modes in a crystal with finite temperature and find good agreement with the experiment and simulations.

Channeling of particles and associated anomalous transport in a two-dimensional complex plasma crystal.

Implications of the recently discovered effect of channeling of upstream extra particles for transport phenomena in a two-dimensional plasma crystal are discussed. Upstream particles levitated above the lattice layer and tended to move between the rows of lattice particles. An example of heat transport is considered, where upstream particles act as moving heat sources, which may lead to anomalous heat transport. The average channeling length observed was 15-20 interparticle distances. Other features of the channeling process are also reported.