Turn-on Signal Research Articles

Two Novel Fluorescence Probes Based on Caffeic Acid Derivative for Phosphate Ions and Their Applications in Biological Samples.

Phosphate is widely used in industry and agriculture fields. However, excess accumulation of PO43- causes several adverse effects on the human body and ecological environment. Consequently, it is important to develop a simple method for the detection of PO43- concentration in the ecological environment and in vivo. Herein, two caffeic acid derivative-based fluorescence probes (BAM-HM and BAM-HH) were developed for the detection of phosphate. The BAM-HM probe could detect phosphate via fluorescence enhancement at 500 nm, with the detection limit being 0.612 µM. Meanwhile, the BAM-HH probe showed a significant turn-on signal at 450 nm after the addition of phosphate, and the detection limit was calculated to be 0.318 µM. The sensing mechanism was determined by 1H NMR and MS. Furthermore, the two probes (BAM-HM and BAM-HH) were applied for PO43-detection in living cells and water samples.

Microenvironment-Activatable Probe for Precise NIR-II Monitoring and Synergistic Immunotherapy in Rheumatoid Arthritis.

Rheumatoid arthritis (RA) represents an insidious autoimmune inflammatory disorder that severely lowers the life quality by progressively destructing joint functions and eventually causing permanent disability, posing a serious public health problem. Here, an advanced theranostic probe is introduced that integrates activatable second near-infrared (NIR-II) fluorescence imaging for precise RA diagnosis with multi-pronged RA treatments. A novel molecular probe comprising a long-wavelength aggregation-induced emission unit and a manganese carbonyl cage motif is synthesized, which enables NIR-II fluorescence activation and concurrently releasing therapeutic carbon monoxide (CO) gas in inflamed joint microenvironment. This molecular probe self-assembles into a biocompatible nanoprobe, which is subsequently conjugated with anti-IL-6R antibody to afford active-targeting ability of RA. The nanoprobe exhibits significant turn-on NIR-II fluorescence signal at the RA lesion, enabling highly sensitive RA diagnosis and real-time therapeutic monitoring. The combination of ROS scavenging, on-demand CO gas release, and IL-6 signaling blockade results in potent therapeutic effect and synergistic immunomodulation impact, significantly alleviating the RA symptoms and preventing joint destruction. This research introduces a novel paradigm for the development of high-performance, activatable theranostic strategies to facilitate precise detection and enhanced treatment of RA-related diseases.

Dual-Activated Photoacoustic Probe for Reliably Detecting Hydroxyl Radical in Ischemic Cardiovascular Disease in Mouse and Human Samples.

Cardiovascular disease (CVD) is a chronic disease characterized by the accumulation of lipids and fibrous tissue within the arterial walls, potentially leading to vascular obstruction and an increased risk of heart disease and stroke. Hydroxyl radicals play a significant role in the formation and progression of CVD as they can instigate lipid peroxidation, resulting in cellular damage and inflammatory responses. However, precisely detecting hydroxyl radicals in CVD lesions presents significant challenges due to their high reactivity and short lifespan. Herein, we present the development and application of a novel activatable optical probe, Cy-OH-LP, designed to detect hydroxyl radicals in lipid-rich environments specifically. Built on the Cy7 molecular skeleton, Cy-OH-LP exhibits near-infrared absorption and fluorescence characteristics, and its specific response to hydroxyl radicals enables a turn-on signal in both photoacoustic and fluorescence spectra. The probe demonstrated excellent selectivity and stability in various tests. Furthermore, Cy-OH-LP was successfully applied in an in vivo model to detect hydroxyl radicals in mouse models, providing a potential tool for diagnosing and monitoring AS. The biosafety of Cy-OH-LP was also verified, showing low cytotoxicity and no significant organ damage in mice. The findings suggest that Cy-OH-LP is a promising tool for the specific detection of hydroxyl radicals in lipid-rich environments, providing new possibilities for research and clinical applications in the field of oxidative stress-related diseases.

Fluorescent Iron-Doped Polymer Dot Nanozyme-Based Cascade System for Dual-Mode Detection of Acetylcholinesterase Activity and Its Inhibitors.

The advancement of acetylcholinesterase (AChE) activity and its inhibitor assays is crucial for clinical diagnosis, drug screening, and environmental monitoring. A nanozyme-mediated cascade reaction system could offer promising prospects for a wide range of applications in such biosensing; however, the creation of nanozyme catalysts with diverse functionalities remains a significant challenge. Herein, we have proposed a multifunctional iron-doped polymer dots (Fe-PDs) nanozyme possessing excellent fluorescence and peroxidase (POD)-mimicking activity. Notably, the Fe-PDs nanozyme is capable of catalyzing H2O2 to produce a series of reactive oxygen species, which can simultaneously quench the fluorescence of Fe-PDs and induce a chromogenic reaction of 3,3',5,5'-tetramethylbenzidine (TMB), enabling the dual-mode detection of H2O2 through both fluorescence turn-off and absorbance turn-on signals. Furthermore, by integrating acetylcholine (ACh) and choline oxidase (ChOx), we have developed a three-enzyme (AChE-ChOx-POD) cascade-based fluorometric and colorimetric dual-mode sensing platform for monitoring AChE activity and its inhibitors. The sensitive and convenient dual-mode sensor has achieved low limits of detection with 0.5 mU/mL (fluorometry) and 0.014 mU/mL (colorimetry) for AChE, respectively, which are superior to the traditional Ellman's assay. More significantly, this sensor can also be extended to detect the reversible and irreversible inhibitors of AChE, such as tacrine (IC50 = 23.3 nM) and carbaryl (LOD = 0.8 nM). We firmly believe that this innovative dual-mode nanozyme-involved multienzyme cascade system-based sensing strategy will stimulate further exploration and serve as a versatile and practical tool for biochemical sensing applications.

Multimodal optical detection, identification and reduction of Cr(VI) with carbon dots and its PVA/polyNIPAM spheres based 2D luminescent photonic structures

Multiple emissive carbon dots (CDs) were synthesized through a one-step solvothermal acid-assisted method using citric acid and urea. Three main emission bands were observed at ∼431 nm, ∼501 nm, and ∼622 nm, corresponding to excitation wavelengths of 360 nm, 430 nm, and 550 nm, respectively. Simultaneous detection through salient discernible features of three metal ions has been achieved. Emission of CDs with Fe(III) shows reduction in intensity at 360 nm and 550 nm wavelengths and an enhancement of photoluminescence (PL) intensity at an excitation wavelength of 430 nm. Al(III) revealed turn-on PL signals, along with a redshift when excited at 360 and 430 nm, and turn-off intensity at excitation of 550 nm. Under all the excitation wavelengths, Cr(VI) exhibits PL quenching accompanied with an additional red shift. This sensor enhances the accuracy and reliability of the probe through multiple distinctive and characteristic responses for all the three ions for which the probes were selective. Apart from the optical detection at a certain wavelength, the Cr(VI) reduction to the less toxic Cr(III) through as-prepared CDs could be monitored at three different excitation wavelengths. The Fe(III) and Cr(VI) detection in solid state has also been demonstrated through 2D luminescent photonic structures formed with CDs-PVA (poly-vinyl alcohol)-polyNIPAM (poly (N-isopropylacrylamide)) composites that can possibly be used for anticounterfeiting applications.

Confining Thiolysis of Dinitrophenyl Ether to a Luminescent Metal-Organic Framework with a Large Stokes Shift for Highly Efficient Detection of Hydrogen Sulfide in Rat Brain.

Hydrogen sulfide (H2S) is a gaseous signaling molecule that regulates various physiological and pathological processes in the central nervous system. It is vital to develop an effective method to detect H2S in vivo to elucidate its critical role. However, current fluorescent probes for accurate quantification of H2S still face big challenges due to complicated fabrication, small Stokes shift, unsatisfactory selectivity, and especially delayed response time. Herein, based on simple postsynthetic modification, we present an innovative strategy by confining H2S-triggered thiolysis of dinitrophenyl (DNP) ether within a luminescent metal-organic framework (MOF) to address those issues. Due to the cleavage of the DNP moiety by H2S, the nanoprobe gives rise to a remarkable fluorescence turn-on signal with a large Stokes shift of 190 nm and also provides high selectivity to H2S against various interferents including competing biothiols. In particular, by virtue of the unique structural property of the MOF, it exhibits an ultrafast sensing ability for H2S (only 5 s). Moreover, the fluorescence enhancement efficiency displays a good linear correlation with H2S concentration in the range of 0-160 μM with a detection limit of 0.29 μM. Importantly, these superior sensing performances enable the nanoprobe to measure the basal value and monitor the change of H2S level in the rat brain.

Rapid assessment of acetophenone using an anti-interfering triple-emission Ln3+-functionalized HOF@MOF sensor

The development of high-performance sensors for rapidly detecting acetylacetone (AP) in water samples is necessary because its release into the environment can result in many vital problems for human health and environment. Herein, we first designed a hybrid by integrating HOF with ZIF-8 through a sequential growth strategy. By separately introducing blue-emitting SiQDs and green- and red-emitting Tb3+ and Eu3+ into ZIF-8 and HOF, the resultant ZIF-8@SiQDs@HOF@Eu3+@Tb3+ comprised three emission peaks at 484, 545 and 620 nm, all of which could be employed as switch-off responsive peaks to low concentrations of AP with a detection limit of 0.79 ppm. However, in environments with high concentrations of AP, a turn-on signal at 484 nm was observed. Thereupon, the ratiometric fluorescence intensity of the ternary emission varied within different concentration ranges, accompanied by the fluorescence color evolution from red to salmon to plum to purple to final blue. Moreover, a portable sensing film was fabricated for rapid warning, sensitive and visual determination of AP in complicated environments. Therefore, this triple-emission sensor with wide color variations and strong anti-interference advantages could promote further research to improve the selectivity, sensitivity and inherent self-correction of multimodal fluorescence detection and the ease of sensing operation.

Fabrication of a Near-Infrared-Emissive Probe for Detecting Dipeptidyl Peptidase 4 in the Liver of Diabetic Mice and Clinical Serum.

Dipeptidyl peptidase 4 (DPP4) plays a key role in glucose metabolism, which has been a close target for diabetes pathology and treatment. It is significant for the evaluation of cellular DPP4 activity in various biological systems. Fluorescence imaging technology is currently a popular method for detecting enzymes in living cells due to its advantages of high selectivity, high sensitivity, high spatiotemporal resolution, and real-time visualization. Herein, a near-infrared (NIR)-emissive probe NEDP with a large Stokes shift (153 nm) was developed for the assay of DPP4 activity. Upon addition of DPP4, NEDP can emit a significant turn-on NIR fluorescence signal (673 nm) with high sensitivity and specificity. Moreover, NEDP can successfully be used for imaging of intracellular DPP4, confirming the regulation of DPP4 expression in hyperglucose and its treatment in living cells. Most importantly, NEDP can not only monitor the changes of DPP4 in vivo but also show that DPP4 in diabetes is mainly up-regulated in the liver, and the level of DPP4 is positively correlated with the pathological damage of the liver. In addition, NEDP can identify the serum of diabetic patients from healthy people through the fluorescence response to DPP4. These results demonstrated that the designed probe NEDP provides a prospective visual tool to explore the relationship between DPP4 and diabetes and would be applied for detecting serum of diabetes in the clinic.

A near-infrared turn-on fluorescent probe for the detection of hydrogen sulfide in water samples and food spoilage

Hydrogen sulfide (H2S) is a poisonous pollutant that endangers the environment, and H2S is also produced during food spoilage. Herein, we constructed a dicyanoisophorone-based near-infrared (NIR) fluorescent probe (DCID) to detect H2S. DCID exhibited significant turn-on fluorescence at 700 nm with a low limit of detection (LOD = 74 nM), large Stokes shift (220 nm), prominent selectivity, and response time (100 s) toward H2S. Importantly, the DCID probe had powerful applications in the detection of H2S in environmental samples and food spoilage. In addition, based on DCID-loaded test strips and combined a smartphone sensing platform, which provided a portable and convenient approach for the detection of H2S.

Photoinduced Charge Centralization Quenches the Fluorescence of Conjugation-Fused Tetrazine Labels with Red-to-Near-Infrared Emissions.

Tetrazine-derived fluorogenic labels are extensively studied for their potential in biological and medical imaging. Nonetheless, the fluorescence quenching mechanism in numerous precursors continues to be debated, particularly as the wavelengths extend into the red and near-infrared (NIR) regions. This challenge poses obstacles to systematically optimizing their fluorogenicity, i.e., achieving red-shifted wavelengths and improved fluorescence turn-on signals through click reactions. This paper highlights the significance of photoinduced charge centralization (PCC), a quenching mechanism observed in tetrazine-fused fluorogenic labels with integrated π-conjugations. PCC is primarily responsible for the quenching effects observed in such labels emitting in the red-to-NIR spectrum. Drawing from structure-property relationships, this study proposes two molecular design strategies that incorporate the PCC mechanism and constitutional isomerization to develop high-performance tetrazine-based labels. These strategies facilitate multiplex fluorescence imaging following click reactions, promising significant advancements in bio-orthogonal imaging techniques.

An activated near-infrared fluorescent probe with large Stokes shift for discrimination of bio-thiols

Bio-thiols such as cysteine (Cys), homocysteine (Hcy), and glutathione (GSH) play a crucial role in physiological processes. Distinguishing between Cys, Hcy, and GSH remains a challenge because of their similar structure and reactivity. Herein, we conceptualized and synthesized a near-infrared (NIR) fluorescent probe TAI based on acridine-conjugated indole salts. This innovative probe demonstrated effectiveness in sensitively distinguishing Cys, Hcy and GSH by NIR dual-channel and time-dependence fluorescence. Probe displays a significant turn-on NIR fluorescent response toward Cys at 654 nm under 488 nm excitation with Large Strokes shift (about 166 nm) and high selectivity, but also shows turn-on NIR fluorescent response for Hcy/GSH at 695 nm under 640 nm excitation. More interestingly, the probe also exhibited an NIR fluorescence response at 654 nm to Hcy and no fluorescence response to GSH when the response time is over 3 h. The sensing mechanism was fully confirmed by NMR, HRMS spectra and DFT theoretical calculations. Moreover, successful intracellular imaging experiments in living cells suggest that the probe is suitable for discrimination imaging endogenous and exogenous bio-thiols. This work offers a promising near-infrared fluorescent imaging tool for the differential detection of bio-thiols.

Highly sensitive and selective fluorescent "turn-on" sensor for Ag+ detection using MAPbBr3@PCN-221(Fe): An efficient Ag+-bridged energy transfer from perovskite to MOF.

Metal ion-induced water pollution is attracting increasing public attention. Perovskite quantum dots and metal-organic frameworks (MOFs), owing to their outstanding properties, hold promise as ideal probes for detecting metal ions. In this study, a composite material, MAPbBr3@PCN-221(Fe), was prepared by encapsulating MAPbBr3 quantum dots with PCN-221(Fe), demonstrating high chemical stability and good reusability. The composite material shows a sensitive fluorescence turn-on signal in the presence of silver ions. The fluorescence intensity of the composite material exhibits a linear relationship with the concentration of Ag+ in the solution, with a low detection limit of 8.68 µM. Moreover, the fluorescence signal exhibits a strong selectivity for Ag+, enabling the detection of Ag+ concentration. This fluorescence turn-on signal originates from the Ag+-bridged energy transfer from the conductive band of MAPbBr3 to the excited state of the MOF, which is directly proportional to the concentration of silver ions. Simultaneously, this finding may open up a new possibility in artificial controlled energy transfer from perovskite to MOF for future development.

Efficient turn-on fluorescent probe cooperated by cascade response for disclosing the fluctuation of cysteine in cells

BackgroundThe research on cysteine (Cys) determination is deemed as a hot topic, since it has been reported to be connected with various physiological processes and disease prediction. However, existing Cys-responding probes may expose some defects such as long reaction time, disappointing photostability, and suboptimal sensitivity. Under such a circumstance, our team has proposed an efficient fluorescent probe with novel sensing mechanism to perfectly cope with the above-mentioned drawbacks. ResultsA novel cascade reaction-based probe 9-(2,2-dicyanovinyl)-2,3,6,7-tetrahydro-1H,5H-pyrido[3,2,1-ij]quinolin-8-yl acrylate (DPQA) has been synthesized for the first time. Undergoing addition-cleavage and cyclization-rearrangement processes, DPQA reacts with Cys to generate an iminocoumarin product with relucent green fluorescence, namely 11-imino-2,3,6,7-tetrahydro-1H,5H,11H-pyrano[2,3-f]pyrido[3,2,1-ij]quinoline-10-carbonitrile (IMC-J), and the relative fluorescence quantum yield (Φf) soars from 0.007 to 0.793. Utilizing such a mechanism, DPQA shows a superb turn-on signal (172-fold), low detection limit (4.1 nM), and wide detection range (5–6000 nM) toward Cys detection. Encouraged by the admirable sensing performance of DPQA, bioimaging of endogenous Cys has been attempted in HeLa cells with satisfactory results. Moreover, cell model of H2O2-induced oxidative stress has been established and the Cys fluctuation during this process has been inspected, elucidating how living cells confront with the eruption of reactive oxygen species (ROS) storm. SignificanceThe probe DPQA with such an intriguing cascade responding process for Cys detection has been endowed with many merits, such as fast reaction and superior sensitivity, conducive to improving responsiveness and rendering it more suitable for further applications. Thereby, we expect that the DPQA would be an efficient tool for detecting Cys fluctuation in living cells of different physiological processes.

Mediating sequential turn-on and turn-off fluorescence signals for discriminative detection of Ag+ and Hg2+ via readily available CdSe quantum dots

Realizing the accurate recognition and quantification of heavy metal ions is pivotal but challenging in the environmental, biological, and physiological science fields. In this work, orange fluorescence emitting quantum dots (OQDs) have been facilely synthesized by one-step method. The participation of silver ion (Ag+) can evoke the unique aggregation-induced emission (AIE) of OQDs, resulting in prominent fluorescence enhancement, which is scarcely reported previously. Moreover, the Ag+-triggered turn-on fluorescence can be continuously shut down by mercury ion (Hg2+). This intriguing sequential fluorescence variation exhibits great sensing potency for discrimination and quantification of Ag+ and Hg2+. Meanwhile, our OQDs also exhibit good selectivity, sensitivity, and rapid response toward Ag+ and Hg2+ detection. Due to their high performance, OQDs have been applied to the determination of Ag+ and Hg2+ levels in daily necessities and water samples with satisfactory results. Moreover, a portable smartphone-assisted sensing platform based on chromatic change has been constructed, facilitating the real-time and naked-eye visualization in the resource-confined scene. We anticipate that the discovery of these OQDs would be advantageous for exploring novel QDs materials for fluorescence detection.

Design and application of a novel “turn-on” fluorescent probe for imaging sulfite in living cells and inflammation models

Sulfite is one of the main existing forms of sulfur dioxide (SO2) in living system, which has been recognized as an endogenous mediator in inflammation. Evidence has accumulated to show that abnormal level of sulfite is associated with many inflammatory diseases, including neurological diseases and cancers. Herein, a novel fluorescent probe named QX-OA was designed and synthesized to detect sulfite. QX-OA was constructed by choosing quinolinium-xanthene as the fluorophore and levulinate as the specific and relatively steady recognition reaction. The probe showed remarkable green turn-on signal at 550 nm, together with high sensitivity (90-fold) and excellent selectivity to sulfite over other possible interfering species. In the meantime, QX-OA was successfully applied to visualize endogenous and exogenous sulfite in Hela cells. In the LPS-induced inflammation model, QX-OA could visualize the dose-dependent increase of sulfite level (0-2 mg/mL). Consequently, QX-OA was determined to be a potential method for detecting sulfite in pre-clinical diagnosis.

An AIE Controlled "Off-On" Cu2+-Sensitive Probe for Early Detection of Renal Fibrosis.

Early detection of renal fibrosis (RF) is very important given that it is irreversible when it progresses to the terminal stage. A key marker of RF pathogenesis is activation of myomyofibroblasts, and its targeted imaging may be a promising approach for early detection of RF, but no study has directly imaged activation of renal myomyofibroblasts. Cu2+ plays a major role in the fibrotic activity of myofibroblasts. Herein, inspired by that Cu2+ can complex with bovine serum albumin (BSA), BSA-Ag2S quantum dots (QDs) with aggregation-induced emission (AIE) property are synthesized. Then BSA-Ag2S QDs are modified by chitosan (CS) with renal targeting and hyaluronic acid (HA) with myofibroblast targeting to obtain the AIE assay system (QDs@CS@HA). The system is simple to synthesize, and produces a rapid NIR fluorescence signal turn-on response and a low detection limit of 75× 10-9 m to Cu2+. In addition, cellular and animal experiments have shown that QDs@CS@HA has good biosafety and cell-targeted imaging capability for RF. Based on the successful application of QDs@CS@HA and the mechanism of RF progression in early RF detection, it is expected that QDs@CS@HA may detect RF before the appearance of clinical symptoms.

A novel fluorescent aptasensor based on H-shaped DNA nanostructure and hollow carbon-doped nitrogen nanospheres for sensitive detection of AFB1

The existence of aflatoxin B1 (AFB1) in food has a high carcinogenic effect on humans and animals. In this study, a fluorescent aptasensor for AFB1 detection was studied by designing a unique H-shaped DNA nanostructure and using novel hollow carbon-doped nitrogen nanospheres (HCNS) as the quenching material. The two DNA strands were hybridized to form the skeleton of the H-shaped DNA nanostructure, and the signal probe (S1-FAM) was paired with complementary bases to form the complete H-shaped DNA nanostructure. When AFB1 was absent, the S1-FAM was replaced by AFB1-Apt and was adsorbed by HCNS to generate a fluorescence resonance energy transfer effect (FRET), causing the signal to turn off. In the presence of AFB1, AFB1 specifically bound to AFB1-Apt to form a complex, which led to the stable formation of the S1-FAM into the H-shaped DNA nanostructure, resulting in the signal turn-on. Under the optimal conditions, an excellent linear relationship (R2 = 0.992) was observed between LgCAFB1 and fluorescent intensity ratio in the range of 0.05–500 ng/mL, and the detection limit was 0.023 ng/mL. The designed aptasensor platform was applied to analyze the spiked AFB1 in peanut, corn flour, wheat flour, wine, and black tea with recoveries ranging from 93.6% to 107.2%.

A Stimuli-Responsive Dual-Emitting Covalent Organic Framework Shows Selective Sensing of Highly Corrosive Acidic Media via Fluorescence Turn-On Signal with White Light Emission.

Luminescent covalent organic frameworks (LCOFs) have been employed as platforms for sensing analytes. Judicial incorporation of appropriate functional units inside the framework leads to the different electronic states in the presence of external stimuli, e.g., temperature, pH, etc. We report herein a new COF (TPEPy) as a solid-state acid sensor specific for the highly acidic environments that range from pH ∼0.5 to ∼3.0. This COF shows a protonation-induced reversible color change from bright yellow to deep red upon decreasing the pH from 3 to 0.5 and vice versa. No visual color change was, however, observed above pH 3.0. Photoluminescence (PL) studies show that the intrinsic emission peak of the TPEPy COF at 530 nm is shifted to 420 nm owing to the N-protonation of the imine nitrogen of COF within this pH range. Extensive studies demonstrate that the protonation behavior of the COF is counterion dependent. This was revealed when different acids, e.g., HCl, HNO3, HBr, and HI, were employed. The intensity of the proton-induced emission peak at 420 nm depends significantly upon the counterions with the order of HCl > HNO3 > HBr > HI. These anions interact with the protonated TPEPy COF by cation-anion and H-bonding interactions. Further, the pristine COF showed near white light emission at a particular pH of 2.5 (CIE coordinates 0.27, 0.32). From the PL spectrophotometric titrations, the deprotonation pKa was experimentally found to be 1.8 ± 0.02 for the TPEPy COF. The sensor reported herein is reversible, reusable, and regenerable and is useful for assessing pH fluctuations within a strongly acidic range via digital signaling.

A fluorogenic nitric oxide donor induced by yellow LED light for cells proliferation inhibition and imaging

Nitric oxide (NO), as a vital cellular signalling molecule in physiological processes, has been found to play an important role in various biological functions. In this study, we rationally designed three NO donors by tethering nitrobenzene derivatives to three fluorescent chromophores. NX-NO was found to release NO and exhibit a high fluorescence turn-on signal ratio upon exposure to LED yellow light. Additionally, it had excellent photo-stability and good inhibitory activity against cancer cell proliferation, and was successfully applied to cell imaging. Moreover, we detected the release of NO and fluorescence response in the blood of a mouse, suggesting its potential therapeutic application in living organisms.

Unique Reaction-Based Polynorbornene Sensing Probes for Ultrasensitive Detection of Hydrazine in Both Environmental and Biological Systems.

Hydrazine-mediated formation of 1,4-phthalazinedione analogues from phthalimide-like components has been utilized to formulate fluorescent probe NorTh. A turn-on fluorescent process has been evaluated to detect hydrazine in a highly selective manner by a small molecular probe NorTh and its homopolymer Poly-NorTh. Both these probes have been evaluated as excellent candidates for nanomolar level detection of hydrazine with a time frame of <15 min, which is rapid in terms of real application. Due to the reaction-based detection process, we have achieved high selectivity for our probes toward the identification of hydrazine in the presence of metal ions, anions, amino acids, and various amines. Limit of detection values are 16 and 35 nM for NorTh and Poly-NorTh, respectively, which are well below the permissible limit given by WHO and EPA. Poly-NorTh has been utilized to detect hydrazine in environmental water samples, soil samples, and biological samples to establish the applicability of our probes in real-field scenarios. We introduce an easy-to-synthesize, cheap, and small molecular probe and its polymer for ultrafast, highly selective, and sensitive detection of hydrazine in all possible mediums to counter the hydrazine toxicity through fluorescence turn-on signal output.