Turbo Spin Echo Pulse Sequence Research Articles

A Hybrid Model for Fetal Growth Restriction Assessment by Automatic Placental Radiomics on T2-Weighted MRI and Multifeature Fusion.

MRI-based placental analyses have been used to improve fetal growth restriction (FGR) assessment by complementing ultrasound-based measurements. However, these are still limited by time-consuming manual annotation in MRI data and the lack of mother-based information. To develop and validate a hybrid model for accurate FGR assessment by automatic placental radiomics on T2-weighted imaging (T2WI) and multifeature fusion. Retrospective. 274 pregnant women (29.5 4.0 years) from two centers were included and randomly divided into training (N = 119), internal test (N = 40), time-independent validation (N = 43), and external validation (N = 72) sets. 1.5-T, T2WI half-Fourier acquisition single-shot turbo spin-echo pulse sequence. First, the placentas on T2WI were manually annotated, and a deep learning model was developed to automatically segment the placentas. Then, the radiomic features were extracted from the placentas and selected by three-step feature selection. In addition, fetus-based measurement features and mother-based clinical features were obtained from ultrasound examinations and medical records, respectively. Finally, a hybrid model based on random forest was constructed by fusing these features, and further compared with models based on other machine learning methods and different feature combinations. The performances of placenta segmentation and FGR assessment were evaluated by Dice similarity coefficient (DSC) and the area under the receiver operating characteristic curve (AUROC), respectively. A P-value <0.05 was considered statistically significant. The placentas were automatically segmented with an average DSC of 90.0%. The hybrid model achieved an AUROC of 0.923, 0.931, and 0.880 on the internal test, time-independent validation, and external validation sets, respectively. The mother-based clinical features resulted in significant performance improvements for FGR assessment. The proposed hybrid model may be able to assess FGR with high accuracy. Furthermore, information complementation based on placental, fetal, and maternal features could also lead to better FGR assessment performance. Stage 2.

Modern acceleration in musculoskeletal MRI: applications, implications, and challenges.

Magnetic resonance imaging (MRI) is crucial for accurately diagnosing a wide spectrum of musculoskeletal conditions due to its superior soft tissue contrast resolution. However, the long acquisition times of traditional two-dimensional (2D) and three-dimensional (3D) fast and turbo spin-echo (TSE) pulse sequences can limit patient access and comfort. Recent technical advancements have introduced acceleration techniques that significantly reduce MRI times for musculoskeletal examinations. Key acceleration methods include parallel imaging (PI), simultaneous multi-slice acquisition (SMS), and compressed sensing (CS), enabling up to eightfold faster scans while maintaining image quality, resolution, and safety standards. These innovations now allow for 3- to 6-fold accelerated clinical musculoskeletal MRI exams, reducing scan times to 4 to 6min for joints and spine imaging. Evolving deep learning-based image reconstruction promises even faster scans without compromising quality. Current research indicates that combining acceleration techniques, deep learning image reconstruction, and superresolution algorithms will eventually facilitate tenfold accelerated musculoskeletal MRI in routine clinical practice. Such rapid MRI protocols can drastically reduce scan times by 80-90% compared to conventional methods. Implementing these rapid imaging protocols does impact workflow, indirect costs, and workload for MRI technologists and radiologists, which requires careful management. However, the shift from conventional to accelerated, deep learning-based MRI enhances the value of musculoskeletal MRI by improving patient access and comfort and promoting sustainable imaging practices. This article offers a comprehensive overview of the technical aspects, benefits, and challenges of modern accelerated musculoskeletal MRI, guiding radiologists and researchers in this evolving field.

Extended and weightbearing wrist 3-T MRI using a novel harness and flexible 24-channel glove coil to evaluate carpal kinematics: a pilot study in 10 volunteers.

Wrist pain in the extended or extended weightbearing positions may be incompletely evaluated using standard magnetic resonance imaging (MRI) with standard rigid clamshell coils in the neutral position. To evaluate a flexible 24-channel glove coil and harness when imaging the wrist in neutral, dorsally extended, and weightbearing positions. Ten wrists in 10 asymptomatic volunteers (mean age = 29 years) were scanned. Participants underwent 3-T MRI using the harness and flexible glove coil, acquiring sagittal turbo spin echo (TSE) and half-Fourier acquisition single-shot turbo spin echo (HASTE) pulse sequences. Static TSE images were obtained in neutral, extended, and weightbearing positions using proton density parameters and independently evaluated by two radiologists for: dorsal radiocarpal ligament thickness; radiocapitate, radiolunate, and capitatolunate angles; palmar translation of the lunate on the radius; angulation of the extensor tendons; and distance from the distal extensor retinaculum to Lister's tubercle. Cine HASTE images were dynamically acquired between neutral-maximum extension to measure the radiocapitate angle. Good reader agreement was observed (r > 0.73) for all measurements except palmar translation in the neutral position (r = 0.27). Significant increases in dorsal radiocarpal ligament thickness; radiocapitate, radiolunate and capitolunate angulation; and extensor tendon angulation were observed between the neutral and extended positions (P < 0.001). A further significant increase in these metrics between extended and weightbearing positions was also seen (P < 0.01). Significant increases in dorsal radiocarpal ligament thickness, articular and tendon angulations occur during wrist extension, that further increase with dorsal weightbearing.

Molecular Magnetic Resonance Imaging of Aneurysmal Inflammation Using a Redox Active Iron Complex.

Inflammation plays a key role in driving brain aneurysmal instability and rupture, but clinical tools to noninvasively differentiate between inflamed and stable aneurysms are lacking. We hypothesize that imaging oxidative changes in the aneurysmal microenvironment driven by myeloid inflammatory cells may represent a noninvasive biomarker to evaluate rupture risk. In this study, we performed initial evaluation of the oxidatively activated probe Fe-PyC3A as a tool for magnetic resonance imaging (MRI) of inflammation in a rabbit model of saccular aneurysm. The difference in longitudinal relaxivity ( r1 ) in reduced and oxidized states of Fe-PyC3A was measured in water and blood plasma phantoms at 3 T. A rabbit saccular aneurysm model was created by endovascular intervention/elastinolysis with subsequent decellularization in situ. Rabbits were imaged at 4 weeks (n = 4) or 12 weeks (n = 4) after aneurysmal induction, when luminal levels of inflammation reflected by the presence of myeloperoxidase positive cells are relatively high and low, respectively, using a 3 T clinical scanner. Both groups were imaged dynamically using a 2-dimensional T1-weighted fast field echo pulse MRI sequence before and up to 4 minutes postinjection of Fe-PyC3A. Dynamic imaging was then repeated after an injection of gadobutrol (0.1 mmol/kg) as negative control probe. Rabbits from the 12-week aneurysm group were also imaged before and 20 minutes and 3 hours after injection of Fe-PyC3A using an axial respiratory gated turbo-spin echo (TSE) pulse sequence with motion-sensitized driven equilibrium (MSDE) preparation. The MSDE/TSE imaging was repeated before, immediately after dynamic acquisition (20 minutes postinjection), and 3 hours after injection of gadobutrol. Aneurysmal enhancement ratios (ERs) were calculated by dividing the postinjection aneurysm versus skeletal muscle contrast ratio by the preinjection contrast ratio. After imaging, the aneurysms were excised and inflammatory infiltrate was characterized by fluorometric detection of myeloperoxidase activity and calprotectin immunostaining, respectively. In vitro relaxometry showed that oxidation of Fe-PyC3A by hydrogen peroxide resulted in a 15-fold increase of r1 at 3 T. Relaxometry in the presence of blood plasma showed no more than a 10% increase of r1 , indicating the absence of strong interaction of Fe-PyC3A with plasma proteins. Dynamic imaging with Fe-PyC3A generated little signal enhancement within the blood pool or adjacent muscle but did generate a transient increase in aneurysmal ER that was significantly greater 4 weeks versus 12 weeks after aneurysm induction (1.6 ± 0.30 vs 1.2 ± 0.03, P < 0.05). Dynamic imaging with gadobutrol generated strong aneurysmal enhancement, but also strong enhancement of the blood and muscle resulting in smaller relative ER change. In the 12-week group of rabbits, MSDE/TSE imaging showed that ER values measured immediately after dynamic MRI (20 minutes postinjection) were significantly higher ( P < 0.05) in the case of Fe-PyC3A (1.25 ± 0.06) than for gadobutrol injection (1.03 ± 0.03). Immunohistochemical corroboration using anticalprotectin antibody showed that leukocyte infiltration into the vessel walls and luminal thrombi was significantly higher in the 4-week group versus 12-week aneurysms (123 ± 37 vs 18 ± 7 cells/mm 2 , P < 0.05). Magnetic resonance imaging using Fe-PyC3A injection in dynamic or delayed acquisition modes was shown to generate a higher magnetic resonance signal enhancement in aneurysms that exhibit higher degree of inflammation. The results of our pilot experiments support further evaluation of MRI using Fe-PyC3A as a noninvasive marker of aneurysmal inflammation.

Automatic detection of Gibbs artefact in MR images with transfer learning approach.

Quality control of magnetic resonance imaging includes image validation, which covers also artefact detection. The daily manual review of magnetic resonance images for possible artefacts can be time-consuming, so automated methods for computer-assisted quality assessment of magnetic resonance imaging need to be developed. The aim of this study was to develop automatic detection of Gibbs artefacts in magnetic resonance imaging using a deep learning method called transfer learning, and to demonstrate the potential of this approach for the development of an automatic quality control tool for the detection of such artefacts in magnetic resonance imaging. The magnetic resonance image dataset of the scanned phantom for quality assurance was created using a turbo spin-echo pulse sequence in the transverse plane. Images were created to include Gibbs artefacts of varying intensities. The images were annotated by two independent reviewers. The annotated dataset was used to develop a method for Gibbs artefact detection using the transfer learning approach. The VGG-16, VGG-19, and ResNet-152 convolutional neural networks were used as pre-trained networks for transfer learning and compared using 5-fold cross-validation. All accuracies of the classification models were above 97%, while the AUC values were all above 0.99, confirming the high quality of the constructed models. We show that transfer learning can be successfully used to detect Gibbs artefacts on magnetic resonance images. The main advantages of transfer learning are that it can be applied on small training datasets, the procedures to build the models are not so complicated, and they do not require much computational power. This shows the potential of transfer learning for the more general task of detecting artefacts in magnetic resonance images of patients, which consequently can improve and speed up the process of quality assessment in medical imaging practice.

MRI-guided sacroiliac joint injections in children and adults: current practice and future developments.

Common etiologies of low back pain include degenerative arthrosis and inflammatory arthropathy of the sacroiliac joints. The diagnostic workup revolves around identifying and confirming the sacroiliac joints as a pain generator. Diagnostic sacroiliac joint injections often serve as functional additions to the diagnostic workup through eliciting a pain response that tests the hypothesis that the sacroiliac joints do or do not contribute to the patient's pain syndrome. Therapeutic sacroiliac joint injections aim to provide medium- to long-term relief of symptoms and reduce inflammatory activity and, ultimately, irreversible structural damage. Ultrasonography, fluoroscopy, computed tomography, and magnetic resonance imaging (MRI) may be used to guide sacroiliac joint injections. The populations that may benefit most from MRI-guided sacroiliac joint procedures include children, adolescents, adults of childbearing age, and patients receiving serial injections due to the ability of interventional MRI to avoid radiation exposure. Most clinical wide-bore MRI systems can be used for MRI-guided sacroiliac joint injections. Turbo spin echo pulse sequences optimized for interventional needle display visualize the needle tip with an error margin of < 1mm or less. Published success rates of intra-articular sacroiliac joint drug delivery with MRI guidance range between 87 and 100%. The time required for MR-guided sacroiliac joint injections in adults range between 23-35min and 40min in children. In this article, we describe techniques for MRI-guided sacroiliac joint injections, share our practice of incorporating interventional MRI in the care of patients with sacroiliac joint mediated pain, discuss the rationales, benefits, and limitations of interventional MRI, and conclude with future developments.

Cancellation of streak artifacts in radial abdominal imaging using interference null space projection.

In radial abdominal imaging, it has been commonly observed that signal from the arms cause streaks due to system imperfections. We previously introduced a streak removal technique (B-STAR), which is inherently spatially variant and limited to work in image space. In this work, we propose a spatially invariant streak cancellation technique (CACTUS), which can be applied in either image space or k-space and is compatible with iterative reconstructions. Streak sources are typically spatially localized and can be represented using a low-dimensional subspace. CACTUS identifies the streak subspace by leveraging the spatial redundancy of receiver coils and projects the data onto the streak null space to eliminate the streaks. When applied in k-space, CACTUS can be combined with iterative reconstructions. CACTUS was tested in phantoms and in vivo abdominal imaging using a radial turbo spin-echo pulse sequence. In phantoms, CACTUS improved T2 estimation in comparison to previous de-streaking methods. In vivo experiments showed that CACTUS reduced streaks and yielded T2 estimation, in regions affected by streaks, closer to a streak-free reference. Evaluation using a clinical abdominal dataset (n=20) showed that CACTUS is comparable to B-STAR and yields significantly better signal preservation and streak cancellation than coil removal and suppression methods. CACTUS provides superior signal preservation and streak reduction performance compared to coil removal and suppression methods. As a clear advantage over B-STAR, CACTUS can be integrated with iterative reconstruction methods. In abdominal T2 mapping, CACTUS improves the accuracy of parameter estimation in areas affected by streaks.

Signal-to-noise ratio uniformity and stability of agar gel phantom with iron (III) oxide as relaxation modifier

BackgroundAgar has been commonly used as one of the materials to fabricate magnetic resonance imaging phantoms in the past few decades. In this study, eleven agar gel phantoms with different iron (III) oxide (Fe2O3) masses were prepared. This study was aimed to evaluate the signal-to-noise ratio (SNR) uniformity and stability of agar gel phantoms with and without the addition of Fe2O3 at two different time points (TPs). Fe2O3 powder was used as a relaxation modifier to manipulate and produce various SNR, T1 and T2 values. These phantoms were scanned using turbo spin echo pulse sequence to produce T1- and T2-measurement images. The SNR was then computed by plotting 1, 3 and 25 regions of interest on the images using ImageJ software. The T1 and T2 relaxation equations were then fitted to the experimental results of SNR versus TR and SNR versus TE curves for the determination of saturation (SNRo), T1 and T2 values.ResultsThe results demonstrated that the agar gel phantoms were able to maintain SNR uniformity but not SNR stability after 4 weeks of phantom preparation. The change in the water content and microstructure of the phantoms have no significant effect on T2 relaxation but on T1 relaxation. The T1 and T2 of the agar gel phantoms were minimally affected although there was a systemic increase in the content of the Fe2O3 powder.ConclusionsIt can be concluded that the agar gel phantoms exhibited the characteristics of SNR uniformity, but they showed instability of SNR at TP2. The Fe2O3 in powder form is not an effective relaxation modifier to reduce the T1 and T2 when it is introduced into the agar gel phantoms. Dissolved nanosized particles should be the focus of future studies.

BLADE turbo gradient- and spin-echo in the assessment of sinonasal lesions: a comprehensive comparison of image quality in readout-segmented echo-planar imaging.

A two-dimensional turbo gradient-echo and spin-echo diffusion-weighted pulse sequence with a non-Cartesian BLADE trajectory (TGSE BLADE) can eliminate image artifacts and distortion with clinically acceptable scan times. This process has the potential to overcome the shortcomings of current diffusion-weighted imaging (DWI) techniques, especially in the sinonasal region. To investigate the feasibility of TGSE BLADE in the assessment of sinonasal lesions and compare the quality of TGSE BLADE with RESOLVE images both qualitatively and quantitatively. A total of 36 patients with sinonasal lesions were included in this prospective study. DW images acquired using TGSE BLADE and RESOLVE were performed with the same acquisition time. Two independent observers evaluated the qualitative parameters (overall image quality, lesion visibility, and geometric distortion) and quantitative parameters (geometric distortion ratio [GDR], signal-to-noise ratio [SNR], contrast, contrast-to-noise ratio [CNR], and apparent diffusion coefficient [ADC] value) of the two sequences. Qualitative assessment revealed that TGSE BLADE exhibited higher overall image quality (P < 0.001) and lesion visibility (P < 0.001) and less geometric distortion (P < 0.001) than RESOLVE. Quantitative assessment showed that TGSE BLADE images exhibited higher contrast (P < 0.001) and CNR (P < 0.001) and lower GDR (P < 0.05) and SNR (P < 0.001) than RESOLVE images. The ADC value of TGSE BLADE was significantly lower than that of RESOLVE (P < 0.05). TGSE BLADE can reduce susceptibility artifacts and geometric distortion more than RESOLVE and appears to be a promising diffusion imaging sequence for the assessment of sinonasal lesions.

3D MRI of the Ankle: A Concise State-of-the-Art Review.

Magnetic resonance imaging (MRI) is a powerful imaging modality for visualizing a wide range of ankle disorders that affect ligaments, tendons, and articular cartilage. Standard two-dimensional (2D) fast spin-echo (FSE) and turbo spin-echo (TSE) pulse sequences offer high signal-to-noise and contrast-to-noise ratios, but slice thickness limitations create partial volume effects. Modern three-dimensional (3D) FSE/TSE pulse sequences with isotropic voxel dimensions can achieve higher spatial resolution and similar contrast resolutions in ≤ 5 minutes of acquisition time. Advanced acceleration schemes have reduced the blurring effects of 3D FSE/TSE pulse sequences by affording shorter echo train lengths. The ability for thin-slice partitions and multiplanar reformation capabilities eliminate relevant partial volume effects and render modern 3D FSE/TSE pulse sequences excellently suited for MRI visualization of several oblique and curved structures around the ankle. Clinical efficiency gains can be achieved by replacing two or three 2D FSE/TSE sequences within an ankle protocol with a single isotropic 3D FSE/TSE pulse sequence. In this article, we review technical pulse sequence properties for 3D MRI of the ankle, discuss practical considerations for clinical implementation and achieving the highest image quality, compare diagnostic performance metrics of 2D and 3D MRI for major ankle structures, and illustrate a broad spectrum of ankle abnormalities.

3D MRI: Technical Considerations and Practical Integration.

One of the main advantages of three-dimensional (3D) magnetic resonance imaging (MRI) is the possibility of isotropic voxels and reconstructed planar cuts through the volumetric data set in any orientation with multiplanar reformation software through real-time evaluation. For example, reformats by the radiologist during reporting allows exploitation of the full potential of isotropic 3D volumetric acquisition or through standardized retrospective reformats of thicker predefined slices of an isotropic volumetric data set by technologists. The main challenges for integrating 3D fast spin echo (FSE) and turbo spin-echo (TSE) MRI in clinical practice are a long acquisition time and some artifacts, whereas for integrating 3D gradient-recalled echo protocols, the main challenges are lower signal-to-noise ratios (SNRs) and the inability to produce intermediate, and T2-weighted contrast. The implementation of bidirectional parallel imaging acquisition and random undersampling acceleration strategies of 3D TSE pulse sequences substantially shortens the examination time with only minor SNR reductions. This article provides an overview of general technical considerations of 3D FSE and TSE sequences in musculoskeletal MRI. It also describes how these sequences achieve efficient data acquisition and reviews the main advantages and challenges for their introduction to clinical practice.

Prospective Evaluation of Repeatability and Robustness of Radiomic Descriptors in Healthy Brain Tissue Regions In Vivo Across Systematic Variations in T2-Weighted Magnetic Resonance Imaging Acquisition Parameters.

Radiomic descriptors from magnetic resonance imaging (MRI) are promising for disease diagnosis and characterization but may be sensitive to differences in imaging parameters. To evaluate the repeatability and robustness of radiomic descriptors within healthy brain tissue regions on prospectively acquired MRI scans; in a test-retest setting, under controlled systematic variations of MRI acquisition parameters, and after postprocessing. Prospective. Fifteen healthy participants. A 3.0 T, axial T2 -weighted 2D turbo spin-echo pulse sequence, 181 scans acquired (2 test/retest reference scans and 12 with systematic variations in contrast weighting, resolution, and acceleration per participant; removing scans with artifacts). One hundred and forty-six radiomic descriptors were extracted from a contiguous 2D region of white matter in each scan, before and after postprocessing. Repeatability was assessed in a test/retest setting and between manual and automated annotations for the reference scan. Robustness was evaluated between the reference scan and each group of variant scans (contrast weighting, resolution, and acceleration). Both repeatability and robustness were quantified as the proportion of radiomic descriptors that fell into distinct ranges of the concordance correlation coefficient (CCC): excellent (CCC > 0.85), good (0.7 ≤ CCC ≤ 0.85), moderate (0.5 ≤ CCC < 0.7), and poor (CCC < 0.5); for unprocessed and postprocessed scans separately. Good to excellent repeatability was observed for 52% of radiomic descriptors between test/retest scans and 48% of descriptors between automated vs. manual annotations, respectively. Contrast weighting (TR/TE) changes were associated with the largest proportion of highly robust radiomic descriptors (21%, after processing). Image resolution changes resulted in the largest proportion of poorly robust radiomic descriptors (97%, before postprocessing). Postprocessing of images with only resolution/acceleration differences resulted in 73% of radiomic descriptors showing poor robustness. Many radiomic descriptors appear to be nonrobust across variations in MR contrast weighting, resolution, and acceleration, as well in test-retest settings, depending on feature formulation and postprocessing. 2 TECHNICAL EFFICACY: Stage 2.

Rapid Musculoskeletal MRI in 2021: Clinical Application of Advanced Accelerated Techniques.

OBJECTIVE. The purpose of this article is to provide a practice-focused review of the clinical application of advanced acceleration techniques for rapid musculoskeletal MRI examinations. CONCLUSION. Parallel imaging, simultaneous multislice acquisition, compressed sensing-based sampling, and synthetic MRI techniques provide unprecedented opportunities for rapid musculoskeletal MRI examinations. For 2D and 3D fast spin-echo and turbo spin-echo pulse sequences, acceleration factors between 3 and 8 can be realized in clinical practice, amounting to a time savings of 66-85% when compared with unaccelerated acquisitions.

Evaluation of optimised 3D turbo spin echo and gradient echo MR pulse sequences of the knee at 3T and 1.5T

IntroductionTo investigate the impact of parameter optimisation for novel three-dimensional 3D sequences at 1.5T and 3T on resultant image quality. MethodsFollowing institutional review board approval and acquisition of informed consent, MR phantom and knee joint imaging on healthy volunteers (n = 16) was performed with 1.5 and 3T MRI scanners, respectively incorporating 8- and 15-channel phased array knee radiofrequency coils. The MR phantom and healthy volunteers were prospectively scanned over a six-week period. Acquired sequences included standard two-dimensional (2D) turbo spin echo (TSE) and novel three-dimensional (3D) TSE PDW (SPACE) both with and without fat-suppression, and T2∗W gradient echo (TrueFISP) sequences. Signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) were measured for knee anatomical structures. Two musculoskeletal radiologists evaluated anatomical structure visualisation and image quality. Quantitative and qualitative findings were investigated for differences using Friedman tests. Inter- and intra-observer agreements were determined with κ statistics. ResultsPhantom and healthy volunteer images revealed higher SNR for sequences acquired at 3T (p-value <0.05). Generally, the qualitative findings ranked images acquired at 3T higher than corresponding images acquired at 1.5T (p < 0.05). 3D image data sets demonstrated less sensitivity to partial volume averaging artefact (PVA) compared to 2D sequences. Inter- and intra-observer agreements for evaluation across all sequences ranged from 0.61 to 0.79 and 0.71 to 0.92, respectively. ConclusionBoth 2D and 3D images demonstrated higher image quality at 3T than at 1.5T. Optimised 3D sequences performed better than the standard 2D PDW TSE sequence for contrast resolution between cartilage and joint fluid, with reduced PVA artefact. Implications for practiceWith rapid advances in MRI scanner technology, including hardware and software, the optimisation of 3D MR pulse sequences to reduce scan time while maintaining image quality, will improve diagnostic accuracy and patient management in musculoskeletal MRI.

Venous cerebral blood volume mapping in the whole brain using venous-spin-labeled 3D turbo spin echo.

Venous cerebral blood volume (CBVv ) is a major contributor to BOLD contrast, and therefore is an important parameter for understanding the underlying mechanism. Here, we propose a velocity-selective venous spin labeling (VS-VSL)-prepared 3D turbo spin echo pulse sequence for whole-brain baseline CBVv mapping. Unlike previous CBVv measurement techniques that exploit the interrelationship between BOLD signals and CBVv , in the proposed VS-VSL technique both arterial blood and cerebrospinal fluid (CSF) signals were suppressed before the VS pulse train for exclusive labeling of venous blood, while a single-slab 3D turbo spin echo readout was used because of its relative immunity to magnetic field variations. Furthermore, two approximations were made to the VS-VSL signal model for simplified derivation of CBVv . In vivo studies were performed at 3T field strength in 8 healthy subjects. The performance of the proposed VS-VSL method in baseline CBVv estimation was first evaluated in comparison to the existing, hyperoxia-based method. Then, data were also acquired using VS-VSL under hypercapnic and hyperoxic gas breathing challenges for further validation of the technique. The proposed technique yielded physiologically plausible baseline CBVv values, and when compared with the hyperoxia-based method, showed no statistical difference. Furthermore, data acquired using VS-VSL yielded average CBVv of 2.89%/1.78%, 3.71%/2.29%, and 2.88%/1.76% for baseline, hypercapnia, and hyperoxia, respectively, in gray/white matter regions. As expected, hyperoxia had negligible effect (P >.8), whereas hypercapnia demonstrated vasodilation (P<<.01). Upon further validation of the quantification model, the method is expected to have merit for 3D CBVv measurements across the entire brain.

Comparison of the Signal-to-Noise Ratio and the Geometric Accuracy between Conventional-Magnetic Bore and Wide-Magnetic Bore 3-T Magnetic Resonance Imaging

In this study, we compared the signal-to-noise ratio (SNR) and the geometric accuracy between conventional-bore and wide-bore 3-T magnetic resonance imaging (MRI) by using both balanced fast field echo (bFFE) and turbo spin-echo (TSE) pulse sequences with a large field of view (FOV). A large-diameter phantom was scanned using clinical 60-cm conventional-bore and 70-cm wide-bore scanners. The signal-to-noise ratios (SNRs) of both the bFFE and the TSE pulse sequences were calculated for each MR scanner for various acceleration factors (AFs). The diameter of the phantom was measured in four directions to evaluate the geometric accuracy. The SNR values were found to increase as the FOV increased for both the conventional- and the wide-bore scanners. No statistically significant differences in the SNR and the geometric accuracy were observed in either sequences between the two bores (p > 0.05), although the image noise tended to increase as the AF of both bores increased. Wide-bore MRI using a large FOV can provide a SNR and a geometric accuracy comparable to those of conventional-bore MRI, despite the increase in the image noise as the AF of both bores is increased.

Volume Isotropic Turbo Spin Echo Acquisition Magnetic Resonance Imaging Pulse Sequence in Assessment of Temporomandibular Disorders

Background: Magnetic resonance imaging is the chief imaging modality used in assessment of temporomandibular disorders.Aim of the study: This study aimed to investigate the validity of Volume ISotropic Turbo spin echo Acquisition (VISTA) pulse sequence in the assessment of temporomandibular disorders.Subjects and Methods: Fifteen patients with temporomandibular joint related complaints performed MRI bilaterally using VISTA proton density and two-dimensional proton density turbo spin echo pulse sequences. Four-point scale was used to assess the clarity of articular disc position, disc morphology, cortical bone delineation, and overall image quality of both tested techniques. Besides, the final diagnosis of each case was obtained.Results: The main and standard deviation of traditionally used 2D proton density images in determination of disc position, disc morphology, delineation of cortical bone and overall image quality were (2.57± 0.49), (2.37± 0.60), (2.8± 0.4), (2.57± 0.49), respectively. While those for VISTA images were (1.8± 0.4), (1.53± 0.72), (2.1± 0.60), (1.7± 0.64) with the same order. The final diagnosis was similar in both techniques in 25 cases out of 30.Conclusion: Volume ISotropic Turbo Spin Echo Acquisition (VISTA) magnetic resonance pulse sequence could reveal the temporomandibular joint related structures, but with less image quality than that of traditionally used two-dimensional proton density images.

An efficient 3D stack-of-stars turbo spin echo pulse sequence for simultaneous T2-weighted imaging and T2 mapping.

To design a pulse sequence for efficient 3D T2-weighted imaging and T2 mapping. A stack-of-stars turbo spin echo pulse sequence with variable refocusing flip angles and a flexible pseudorandom view ordering is proposed for simultaneous T2-weighted imaging and T2 mapping. An analytical framework is introduced for the selection of refocusing flip angles to maximize relative tissue contrast while minimizing T2 estimation errors and maintaining low specific absorption rate. Images at different echo times are generated using a subspace constrained iterative reconstruction algorithm. T2 maps are obtained by modeling the signal evolution using the extended phase graph model. The technique is evaluated using phantoms and demonstrated in vivo for brain, knee, and carotid imaging. Numerical simulations demonstrate an improved point spread function with the proposed pseudorandom view ordering compared to golden angle view ordering. Phantom experiments show that T2 values estimated from the stack-of-stars turbo spin echo pulse sequence with variable refocusing flip angles have good concordance with spin echo reference values. In vivo results show the proposed pulse sequence can generate qualitatively comparable T2-weighted images as conventional Cartesian 3D SPACE in addition to simultaneously generating 3D T2 maps. The proposed stack-of-stars turbo spin echo pulse sequence with pseudorandom view ordering and variable refocusing flip angles allows high resolution isotropic T2 mapping in clinically acceptable scan times. The optimization framework for the selection of refocusing flip angles improves T2 estimation accuracy while generating T2-weighted contrast comparable to conventional Cartesian imaging.

Simultaneous multi-slice accelerated turbo spin echo of the knee in pediatric patients.

To compare knee MRI performed with the integrated parallel acquisition technique (PAT) and simultaneous multislice (SMS) turbo spin echo (TSE) T2-weighted (T2w) sequences with conventional TSE sequences in pediatric patients. This was a retrospective IRB-approved study. Seventy-four subjects (26 male, 48 female, mean age 15.3years, range 8-20) underwent 3-T MRI of the knee with a T2w TSE pulse sequence prototype with four-fold PAT and SMS acceleration as well as the standard PAT-only accelerated sequences. Images were anonymized and two study folders were created: one examination with only T2w PAT2 images (conventional examination) and one examination with only T2w SMS2/PAT2 sequences (SMS examination). Two readers rated examinations for 15 specific imaging findings and 5 quality metrics. Interreader agreement was measured. Signal to noise (SNR) and contrast to noise (CNR) were measured for SMS and conventional T2w sequences. Consensus review demonstrated diagnostic quality performance of SMS examinations with respect to all 15 structures. Average area under the curve (AROC) was 0.95 and 0.97 for readers 1 and 2, respectively. The conventional sequence was favored over SMS for four out of five quality metrics (p < 0.001). SNR and CNR were higher for the conventional sequences compared to SMS. SMS accelerated T2w TSE sequences offer a faster alternative for knee imaging in pediatric patients without compromise in diagnostic performance despite diminished SNR. The four-fold acceleration of SMS is beneficial to pediatric patients who often have difficulty staying still for long MRI examinations.

MR Coagulation: A Novel Minimally Invasive Approach to Aneurysm Repair

PurposeTo demonstrate a proof of concept of magnetic resonance (MR) coagulation, in which MR imaging scanner–induced radiofrequency (RF) heating at the end of an intracatheter long wire heats and coagulates a protein solution to effect a vascular repair by embolization. Materials and MethodsMR coagulation was simulated by finite-element modeling of electromagnetic fields and specific absorption rate (SAR) in a phantom. A glass phantom consisting of a spherical cavity joined to the side of a tube was incorporated into a flow system to simulate an aneurysm and flowing blood with velocities of 0–1.7 mL/s. A double-lumen catheter containing the wire and fiberoptic temperature sensor in 1 lumen was passed through the flow system into the aneurysm, and 9 cm3 of protein solution was injected into the aneurysm through the second lumen. The distal end of the wire was laid on the patient table as an antenna to couple RF from the body coil or was connected to a separate tuned RF pickup coil. A high RF duty-cycle turbo spin-echo pulse sequence excited the wire such that RF energy deposited at the tip of the wire coagulated the protein solution, embolizing the aneurysm. ResultsThe protein coagulation temperature of 60°C was reached in the aneurysm in ∼12 seconds, yielding a coagulated mass that largely filled the aneurysm. The heating rate was controlled by adjusting pulse-sequence parameters. ConclusionsMR coagulation has the potential to embolize vascular defects by coagulating a protein solution delivered by catheter using MR imaging scanner–induced RF heating of an intracatheter wire.