Turbidity Values Research Articles

HYDROCHEMICAL STUDY OF BALAK RIVER, ERBIL-IRAQ

This study was aimed to assess the water quality of different water resources (Surface water, subsurface in water, and groundwater) across the Balak river basin. Twenty two different water resource samples were collected and subjecting to a comprehensive physicochemical analysis. Balak river basin, situated in Erbil governorate, Iraq, it is located 10 km to the east from Bekhal Waterfall. Five attributers combine with Balak River within the basin areas which are: Rezanok Sub River, Balakiyan Sub River, Basan Sub River, Roste Sub River, and Alana Sub River. The hydro chemical study of all water resources during the investigated period revealed that the spring waters are relatively higher in electrical conductivity value compared to other sources. Some surface water samples were recorded high turbidity value. Values recorded for physicochemical parameters were within WHO and Iraqi standards guideline values except for some samples of turbidity. According to water classification, all samples have a very similar composition, and can be classified as Ca-HCO3 water. This indicated that they correspond to different sampling points along different rivers, and different samples along the same river.

A photonic sensor system for real‐time monitoring of turbidity changes in aquaculture

AbstractObjectiveThe objective of this study was to test the compatibility and performance of a developed photonic sensor system, which can serve as a dependable and practical device for continuous monitoring of turbidity changes in aquaculture tanks.MethodsThe fabricated photonic sensor system consisted of an integrated data logger and sensor probe. The sensor probe exhibited a precise emission of infrared light at a wavelength of 850 nm. Moreover, the sensor evaluates the ambient light across the red‐green‐blue spectrum. To ensure accuracy and reliability, the entire system underwent a thorough calibration process, referencing nephelometric turbidity unit values acquired through a specialized handheld turbidimeter. Rigorous trials were systematically conducted in 600‐L seawater tanks featuring tubular sea cucumber Holothuria tubulosa and Gilt‐head Sea Bream Sparus auratus to ensure the sensitivity and robustness of the photonic sensor system to the aquaculture environment.ResultA calibration curve revealed a significant correlation between the infrared channel values of the sensor (photon counts) and the turbidity values measured by the turbidimeter. The photonic sensor effectively captured turbidity changes in the aquaculture tanks, with significant differences observed between the tanks. The sensor performance was evaluated in trials with Gilt‐head Sea Bream, which showed sensitivity to high turbidity changes. The photonic sensor system accurately reflects turbidity changes continuously using its own active light source, independent of ambient light intensity, which is essential for turbid water conditions or for taking measurements in total darkness.ConclusionThe photonic sensor is a reliable tool for the continuous and accurate monitoring of turbidity changes in aquaculture systems. However, there are specific usage limitations under low‐turbidity conditions that can be improved in further studies.

The Study of Removal of Polyvinyl Chloride (PVC) Particles from Wastewater through Electrocoagulation

Plastic was produced massively, especially using polyvinyl chloride (PVC) as a raw material. Unfortunately, this condition cause affects the environment, which creates a new pollutant issue. It is essential to study the removal of PVC microplastics in current water treatment processes. The study of wastewater treatment can be achieved using electrocoagulation, which has several benefits, including low-cost, simple chemicals, and accessible equipment operation. This research investigated the study of the removal of PVC microplastics from wastewater by electrocoagulation. The new potential of the electrocoagulation technique using Al-Al electrodes was studied systematically at various variations, i.e., electrolysis time, electrolyte concentration, initial pH, coagulation speed, and electrolyte type. The results showed that the PVC microplastics removal efficiency reached 100% after electrolysis for 60 min, electrolyte concentration of 0.01 mol/L, initial pH of 7, coagulation speed of 500 rpm, the type of electrolyte used was NaCl at a flocculation speed. These optimum conditions also reduced the value of turbidity of wastewater samples from 1.39 ± 0.02 to 1.10 ± 0.05 NTU. The results of this study provide an engineering perspective in optimizing operational parameters for removing PVC microplastics in aquatic environments.

Application of a Novel Disposable Flow Cell for Spectroscopic Bioprocess Monitoring

The evaluation of the analytical capabilities of a novel disposable flow cell for spectroscopic bioprocess monitoring is presented. The flow cell is presterilized and can be connected to any kind of bioreactor by weldable tube connections. It is clamped into a reusable holder, which is equipped with SMA-terminated optical fibers or an integrated light source and detection unit. This modular construction enables spectroscopic techniques like UV-Vis spectroscopy or turbidity measurements by scattered light for modern disposable bioreactors. A NIR scattering module was used for biomass monitoring in different cultivations. A high-cell-density fed-batch cultivation with Komagataella phaffii and a continuous perfusion cultivation with a CHO DG44 cell line were conducted. A high correlation between the sensor signal and biomass or viable cell count was observed. Furthermore, the sensor shows high sensitivity during low turbidity states, as well as a high dynamic range to monitor high turbidity values without saturation effects. In addition to upstream processing, the sensor system was used to monitor the purification process of a monoclonal antibody. The absorption module enables simple and cost-efficient monitoring of downstream processing and quality control measurements. Recorded absorption spectra can be used for antibody aggregate detection, due to an increase in overall optical density.

Statistical evaluation and quality analysis of water resources around quarry site in Abuja Suburban Nigeria

Water resources occupies vital position regarding the lifespan and general wellbeing humans while significant shortfalls on its reserves hinders almost all sustainable development globally. Most host communities to quarry companies without a water treatment plant are greatly affected by the use of water resources within its area. The present study highlights statistical evaluation and quality analysis of water resources around a quarry site in FCT Nigeria. The research engaged biological assay, physiological and chemical analysis to quantify contamination level of the water resources from obtained data which were also subjected to statistical analysis. The statistical tools employed are Pearson's Correlation, descriptive statistics, Levene's test for homogeneity and one–way analysis. The physiochemical analysis revealed the water resources to have high turbidity value in 58.3 % of sampled population while nitrate concentration and electrical conductivity value were very low. The bioassay revealed presence of coliform bacteria in 100 % of sampled population while thermotolerance count discovered disease-causing-pathogens in 41.7 % of sampled population. Chemical analysis revealed that Pb, Cr, Ni and As were 91.7 %, 83.3 % 100 % and 100 % above recommended permissible limits for sampled population. These results suggests that water resources in this study is unsafe and holds a health-treat with regards to the contaminations inherent in them. Statistical evaluation revealed average positive linear relationship between heavy metal concentration suggesting close relationship of contamination source. Observed strong positive linear relationship between lead and copper, nickel and chromium as well as nickel and arsenic in the scatterplot depicts same source of contamination.

Local and Low-Cost Filter Media of Simple Water Filtration

Commonly the Installation of a Drinking Water Supply System (SPAM) in Indonesia consists of Coagulation-Flocculation, Sedimentation, Filtration and Disinfection Processes as a complete Process Unit for surface feed water such as rivers or lakes. Similarly, the clean water treatment process in Banjarbaru, South Kalimantan, Indonesia uses intake water sources from irrigation. The intake water from irrigation used by the local Regional Drinking Water Company has good quality with a low turbidity value below the quality standards set by the central government. Based on these qualities, the right process unit to treat the water is by filtration only. Therefore, it is necessary to conduct evaluation and research to improve the efficiency of the process unit and the economic value of the water treatment. The purpose of this study is to investigate and evaluate irrigation feed water treatment by filtration using local and low-cost filter media. The filter reactor is designed with a rapid media filter type. The media is characterized using energy dispersive X-ray spectroscopy (EDS) and a scanning electron microscope (SEM) which is plugged in with EDS to find out the primary constituents and morphological information and after knowing the characterization of the media, and followed by tested the media placed in the water filter reactor with data collection. The results show that the size of the filter media has great effect on the quality of the processing water, which the smaller the media diameter conducted high selectivity and speed up filtration time. The greatest result obtained from testing feed water with media is 87.64%. Turbidity of the feed water sample process, which was previously 0.34 NTU, could be decreased to 0.02 NTU. Effective size of 0.4 mm and uniformity coefficient of 1.35 mm are the optimal allowable values.

Cationic tannins as aggregation agents in the flocculation on hematite–silica system

ABSTRACT This study aims to evaluate the use of commercial tannin derivatives, namely, tannin 1 (CT1), tannin 2 (CT2), tannin 3 (CT3), and extract of tannin produced from angico bark, as aggregation agent in hematite–silica systems. Hematite and quartz were used in aggregation tests at dosages of 1, 10, and 100 mg/L at pH values of 6–9. The zeta potential and Jar tests were conducted in the best conditions of aggregation tests. The condensed tannin content of the commercial reagents is approximately similar, and it exceeds the content found in the extract obtained from angico bark. CT3 demonstrated superior percentages of sedimented material for both minerals at a dosage of 10 mg/L and pH 7 (97.12% and 95.68% for hematite and quartz, respectively). The aggregation agent produced from the angico bark displayed good sedimentation results for hematite (>90%); however, the results for quartz were unsatisfactory. The isoelectric point shifts to pH 8 when each mineral was conditioned with CT3. The jar test revealed higher sedimentation of the compositions for the lowest velocity gradient (60 rpm) with low turbidity values in the supernatant; however, the lowest turbidity (24.71 NTU) is observed in the sample with a higher percentage of hematite.

Study of Bacterial Contamination in Katingan River in Katingan Hilir Subdistric

River water pollution is caused by waste, particularly bacterial contamination resulting from a variety of waste types generated by community activities on the river coast. Stream water that is sullied with microbes, whenever utilized reasonably, will be exceptionally risky for the strength of stream seaside networks. The most elevated instances of looseness of the bowels were in Katingan Rule at 4,920 individuals/year. This research aims to determine the type and value of coliform bacterial contamination in the waters of the Katingan River, Kasongan Lama Village, Katingan Hilir District. This research uses quantitative methods. The Katingan river water is cloudy brown, has no aroma, has a turbidity value of 50, which is strongly suspected to be high turbidity, and has a water pH of 3.3, which is strongly suspected to be acidic. All examples from the examination results were positive with a typical MPN worth of >1100 MPN/g and had a place with bar molded gram-negative microbes (bacilli) and were thought to be explicitly Escherichia Coli. The experimental outcomes show that the waters of the Katingan Stream, Kasongan Lama Town, Katingan Hilir Region, are decidedly defiled with coliform microscopic organisms and have passed the edge for class 1 waterway prerequisites (1000 MPN/g).

Assessment of poly(diallyl dimethyl ammonium chloride) and lime for surface water treatment (pond, river, and canal water): seasonal variations and correlation analyses.

The present study deals with the assessment of different physicochemical parameters (pH, electrical conductivity (E.C.), turbidity, total dissolved solids (TDS), and dissolved oxygen) in different surface water such as pond, river, and canal water in four different seasons, viz. March, June, September, and December 2023. The research endeavors to assess the impact of a cationic polyelectrolyte, specifically poly(diallyl dimethyl ammonium chloride) (PDADMAC), utilized as a coagulation aid in conjunction with lime for water treatment. Employing a conventional jar test apparatus, turbidity removal from diverse water samples is examined. Furthermore, the samples undergo characterization utilizing X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The study also conducts correlation analyses on various parameters such as electrical conductivity (EC), pH, total dissolved solids (TDS), turbidity of raw water, polyelectrolyte dosage, and percentage of turbidity removal across different water sources. Utilizing the Statistical Package for Social Science (SPSS) software, these analyses aim to establish robust relationships among initial turbidity, temperature, percentage of turbidity removal, dosage of coagulant aid, electrical conductivity, and total dissolved solids (TDS) in pond water, river water, and canal water. A strong positive correlation could be found between the percentage of turbidity removal and the value of initial turbidity of all surface water. However, a negative correlation could be observed between the polyelectrolyte dosage and raw water's turbidity. By elucidating these correlations, the study contributes to a deeper understanding of the effectiveness of PDADMAC and lime in water treatment processes across diverse environmental conditions. This research enhances our comprehension of surface water treatment methodologies and provides valuable insights for optimizing water treatment strategies to address the challenges posed by varying water sources and seasonal fluctuations.

Water Contaminant Detection and Water Purification of Household Drinking Water Using a New Stacking Ensemble Model

ABSTRACTContaminated drinking water sources pose a significant health risk worldwide. Monitoring programs for drinking water quality aims to ensure safe water supply by informing management practices. Improved online monitoring of water systems is necessary as current lab‐based methods are slow and do not offer real‐time public health protection. Rapid detection and response to potential contamination events are crucial to mitigate health risks. Mark of‐purpose water treatment strategies offer a reasonable method for upgrading drinking water quality at the family level and forestalling waterborne illnesses. This study focuses on collecting household drinking water and utilizing various sensors to measure parameters such as pH, turbidity, water level, temperature, and humidity. A consistent water quality noticing system using the stacking outfit model, which solidifies Bayesian association and decision tree techniques, is proposed in this article. Bayesian network analyzes the input data attained from sensors collecting real‐time data and concludes whether the data represents the contamination event. DTs are utilized to demonstrate the connections between multivariate water boundaries utilized in the review. Afterward, a multiobjective, such as a biobjective optimization model and a nondominated genetic algorithm (NGA) are used in this work of optimization to minimize the volume of contaminated water. After the pollution in the water is identified, water decontamination processes are done given point of purpose medicines like ceramic channels and solar water disinfection (SODIS). The method outlined is executed through Python software. The findings indicate that the estimated values for PH, temperature, and turbidity are 7.3, 31.8, and 0.77, respectively. However, the proposed method is compared with the existing C‐NSGA‐II, while compared to this method, the proposed system produces improved cost functions. Consequently, suitable water treatment and supply should be considered to reduce the effects on people's health as well as to improve living conditions, respectively.

Combined Effects of Local and Regional Drivers on Oyster Spat Density and Growth in Eastern Australia

Up to 85% of shellfish reefs have been lost worldwide, resulting in declining ecosystem services, and increasing restoration demand. However, more information regarding the conditions which maximise oyster settlement and growth is required to optimise restoration. We deployed oyster settlement tiles at 21 intertidal sites throughout Moreton Bay, Australia; a region where > 96% of rock oyster reefs are lost and demand for restoration is high. We quantified effects of variables describing the spatial (from GIS), local habitat (using quadrats and water quality measures), and oyster predator (using underwater videography) characteristics of sites on oyster density and size on tiles. Oyster density was highest at sites with intermediate predator abundance and temperature, highest nearby invertebrate cover, and low and high values of turbidity and nearby rock and algae cover. Conversely, oyster size was highest at sites with intermediate predator density, higher fish species richness and turbidity, and lowest temperatures. Together, this showed that optimal restoration requires sites with 22 to 23 °C average water temperatures, between 10 and 15 oyster predators, and either low (< 2 NTU) or high (> 6 NTU) turbidity levels. Notably, we observed multiple peaks for several variables, suggesting the potential presence of multiple cryptic oyster species on settlement tiles. We found that oysters shared preferred environmental conditions with polychaetes, coralline algae, and tunicates, and were more prevalent and abundant at sites with lower turf algae, barnacle, and mussel cover. Identifying environmental variables influencing oyster population distribution, settlement, and growth can guide the selection and approach of oyster restoration sites.

Study of Temperature Effect on Ferric Chloride Performance in Water Coagulation

Temperature has an essential function and becomes an important parameter in a coagulation process as itinfluences metal ion hydrolysis reaction rate. In order to get further explanation, a research using ferric chloride as a coagulant has been performed. The research aims tofind out more about the effect of temperature on coagulation performance using turbidity, floc size, ferric, and water content parameter. The temperature 5℃ - 45℃ with an interval of 5ºC has been investigated to simulate field (i.e. outside) measurements in winter, spring and autumn, and summer, respectively. The result shows coagulation performance isaffected by temperature elevation. Turbidity gets lower for temperature between 5℃-40℃ and gets higher for temperature 45℃. Floc size becomes larger for temperature 5℃-40℃ and becomes smaller as temperature increase.At temperature between 5ºC and 15ºC, the higher the temperature, the lower the ferric residue produced in coagulation water. For floc water contents, there is no virtually link between temperature and floc water contents. Temperature correlated well with turbidity value (-0.876) and floc size (0.985) but not correlated with ferric residue (0.366)and floc water content (0.179).

Study of Some Environmental and Reproductive Aspects of Some Fish Species in the Tigris River West of the City of Samarra, Salah Al-Din / Iraq

The study was conducted on the Tigris River in the Qalaa area, west of the city of Samarra, Salah al-Din/Iraq, for the period between October 2023 and March 2024, 117 fish were caught, with one catch per month. It has been observed that the higher sex ratio tends to favor females in Carasobarbus luteus, Luciobarbus xanthopterus, Carassius auratus, Leuciscus vorax, and Cyprinus carpio with ratios of 7.0:1, 5.0:1, 4.6:1, 3.5:1 and 3.0:1 respectively, while the lower percentage tends to favor females in Acantho brama marmid, C. macrostomum and Chondrostoma regium in the ratio of 1.8:1, 1.5:1 and 1.19:1, respectively. show the monthly changes in gonad (G.S.I) function for male and female fish (Chondrostoma regium, Carassius auratus and Carasobarbus luteus), (Acantho brama marmid, Leuciscus vorax and Luciobarbus Xanthopterus) and (C. macrostomum and Cyprinus carpio) respectively. The water temperature ranged between 10 and 22°C. The highest water temperature was in October and the lowest in February. The highest value of dissolved oxygen was 8.4 mg/L in March and the lowest value of dissolved oxygen was 6.5 mg/L in October. The highest turbidity value was 49 NTU 1 in December, and the lowest value 39.5 NTU was recorded in February.

Hydro-chemical characteristics of Biring and Tangting Rivers (Nepal) and evaluation of water quality for drinking and irrigation purposes

Although river water is vital for drinking, irrigation and domestic needs, it faces threats from natural processes and human activities. Small and medium-sized rivers, especially in Nepal, remain understudied despite their vital importance in providing water to densely populated areas. This study evaluated the suitability for drinking and irrigation and the hydro-chemical characteristics of the Biring and Tangting rivers in Koshi province, Nepal. The results showed that turbidity, pH, EC, TDS, TH, NH4+, K+, Ca2+, Mg2+, Na+, Cl−, SO42−, HCO3− and NO3− values of all sampling sites in the Biring and Tangting rivers, except for the turbidity value of 10.39 NTU recorded in the PT9 site of the Tangting River, did not exceed maximum limit values set for drinking water. However, according to Water Quality Index results, the water of both rivers was in poor condition for drinking due to domestic wastewater discharges and cremation activities which caused high NH4+ levels. The major cations in both rivers were listed as Ca2⁺ > Na⁺ > K⁺ > Mg2⁺, while the major anions were listed as HCO₃⁻ > Cl⁻ > SO₄2⁻ > NO₃⁻. Gibbs and Piper diagrams showed that geogenic weathering of carbonate rocks prevailing in the region affected the hydrochemistry in both rivers. Evaluation based on seven different irrigation indices and US salinity laboratory diagram revealed that the water of both rivers was suitable for irrigation despite some magnesium-related limitations.

Using the Weibull Distribution to Analyze the Reliability of Water Turbidity Removal and the Amount of Chlorine Remaining in the Water After Treatment

All water treatment centers in Iraq operate according to the standards specified in the legal regulations. Therefore, periodic evaluations must be conducted to study and analyze the quality of the outputs of these centers. The research used the two-parameter Weibull distribution to evaluate the reliability of turbidity removal and residual chlorine in the water at the Rashidiya water center in Baghdad, Iraq. The distribution parameters were estimated using the Maximum Likelihood method with the Matlab 2022 program, and the chi-square test for Goodness of Fit was used at a significant level of 0.05. The study found that the mean (and median = 9 NTU) of turbidity values were 9.47 NTU, which is within the permissible limit, and the mean (and median = 0.03 mg/L) of chlorine values were 0.0295 mg/L, much less than the permissible limit. The study also found that the average efficiency of turbidity removal was 72.179%, which is relatively acceptable, but needs improvement. The analysis showed that the value of reliability for the removal of turbidity was 0.99 ,and for the remaining amount of chlorine was 0.99, indicating that the Rashidiya water center was reliable during the study period. The study recommended several recommendations, the most important of which is the evaluation of all water treatment standards in the Rashidiya water center in particular and in all water treatment centers in Baghdad in general. Maintain continuous turbidity and chlorine levels monitoring to ensure compliance with permissible limits. Make efforts to improve the turbidity removal efficiency. Fostering collaboration between water treatment centers, researchers and regulatory agencies. Develop public awareness campaigns to educate the public on the importance of clean and safe water.

Nonlinear and abnormal relationship between turbidity and suspended solids concentration in mountainous rivers: A case study of the Lai Chi Wo river in Hong Kong, China

Suspended solids concentration (SSC) in a river is closely relevant to river water turbidity. Investigation of their relationship in this study is accompanied by observed turbidity and SSC values, which were obtained from the testing results of water samples and monitored conditions in streamflow. The water samples were collected from two observation stations with a broad range of sediment concentrations in the Lai Chi Wo catchment in Hong Kong, China. We classified the target rainfall events into single-peak event type and dual-peak event type for a distinguished discussion of the relationship between SSC and turbidity in this study. At a finer classification, each event is separated into defined processes for the analysis, where two main processes refer to the periods that SSC rises from a normal state to a peak state first and the followed periods that SSC recesses to ordinary status gradually. It is advised by the analysis results that the estimation of SSC through turbidity values should be based on the same rainfall types for the upstream station. However, the results show that the classification of rainfall types does not need to take downstream areas into consideration. Furthermore, current research implies that the individual established connections between SSC and turbidity value at different stages (particularly referring to the rising period and recessing period) could be applied to estimate SSC at the same station via continuous turbidity values for both this and other ungauged stations with similar topographical features in the future. Meanwhile, this research approach provides new insight exploring various behaviors of sediments at different stages during an integral rainfall event. A comparison of distinguished performances of sediment during corresponding stages in a rainfall event makes contributions to diverse relationship between SSC and turbidity in the mountainous river.

PENGEMBANGAN SISTEM TERINTEGRASI BERBASIS IOT (INTERNET OF THINGS) UNTUK MONITORING DAN KONTROL KUALITAS AIR PADA BUDIDAYA TAMBAK UDANG DARATAN

Water quality is very important for the sustainability of a shrimp farm, starting from the quantity and quality of shrimp harvested is very influential on the good quality of the pond water. The water quality in question is parameters such as water turbidity, a lot or clean of dirt in the pool, a pH value that suits your needs and ammonia content in the pond which is usually produced from shrimp manure. This research designed a water quality monitoring and control tool in shrimp ponds that is integrated automatically through an IoT-based system (Internet of Things) using the thingspeak application as a server and telegram bots as controls. Based on the results of tests that have been carried out, the tool has been able to determine the quality of water correctly. The error percentage was 0.01% for turbidity sensors, 0.05% for TDS sensors, 0.01% for pH sensors and 0.12% for ammonia gas sensors. Based on the results of direct data collection on shrimp ponds for 6 hours, the average value of water turbidity was 3.06 NTU, the lowest was 1.07 NTU and the highest was 5.99 NTU, for the average value of TDS content was 170.98 ppm, 150.00 ppm was the lowest and 204.12 ppm was the highest, for the average pH content was 7.80, the lowest was 7.50 and the highest was 8.74, and the average value of ammonia content was 0.004 ppm, 0.0007 ppm is the lowest and 0.0113 is the highest.

Appraisal of the Propping Potential of Luwa Sand in Nigeria for Hydraulic Fracturing Applications

Natural sands made of spherical and round grains are widely used as proppants during hydraulic fracturing to increase recovery rate of hydrocarbon production. Synthetic proppants with high crush strength are employed for deep reservoir fracturing; however, this type of proppants suffer the disadvantages of high density, high cost and pose environmental hazards. This research was conducted with the aim to assess sands collected from Luwa River in Toro, Bauchi state of Nigeria for possible use as natural sand proppants. An epoxy resin-coated sand was produced using a simple method to modify the sands’ properties. A series of experiments were conducted in accordance with API recommended practice to determine the propping potential of the sand and the resin coated sand. The result from sieve analysis of 20/40 mesh size of Luwa sand revealed a mean size of 625.2 microns (0.625 mm). An X-ray fluorescence (XRF) result showed the presence of aluminosilicates (Al2O3 and SiO2) composition in Luwa sands. The sands recorded a hardness of 8 on the Mohs scale. Analysis of the shape parameters for sphericity and roundness was 0.8 and 0.8 (Krumbein-Sloss) respectively; it has bulk density of 1.64 g/cm3, acid solubility of 0.7% and 4.32% for the resin-coated sand. The sand has turbidity value of 28.98 NTU, loss on ignition in the range of 1.33% to 1.64% and crush resistance varies between 2000-3000 psi for Luwa sand and 4000-5000 psi for the coated sand. A comparison of the experimental results with API standard and conventional Ottawa and Brady models showed the sand competes favourably with these standards in all parameters for consideration as a proppant except for the crush resistance where more than 10% fragments was generated at low pressure of 3000 psi. However, the sand can be applied in shallow depth reservoirs.

Appraisal of the Propping Potential of Luwa Sand in Nigeria for Hydraulic Fracturing Applications

Natural sands made of spherical and round grains are widely used as proppants during hydraulic fracturing to increase recovery rate of hydrocarbon production. Synthetic proppants with high crush strength are employed for deep reservoir fracturing; however, this type of proppants suffer the disadvantages of high density, high cost and pose environmental hazards. This research was conducted with the aim to assess sands collected from Luwa River in Toro, Bauchi state of Nigeria for possible use as natural sand proppants. An epoxy resin-coated sand was produced using a simple method to modify the sands’ properties. A series of experiments were conducted in accordance with API recommended practice to determine the propping potential of the sand and the resin coated sand. The result from sieve analysis of 20/40 mesh size of Luwa sand revealed a mean size of 625.2 microns (0.625 mm). An X-ray fluorescence (XRF) result showed the presence of aluminosilicates (Al2O3 and SiO2) composition in Luwa sands. The sands recorded a hardness of 8 on the Mohs scale. Analysis of the shape parameters for sphericity and roundness was 0.8 and 0.8 (Krumbein-Sloss) respectively; it has bulk density of 1.64 g/cm3, acid solubility of 0.7% and 4.32% for the resin-coated sand. The sand has turbidity value of 28.98 NTU, loss on ignition in the range of 1.33% to 1.64% and crush resistance varies between 2000-3000 psi for Luwa sand and 4000-5000 psi for the coated sand. A comparison of the experimental results with API standard and conventional Ottawa and Brady models showed the sand competes favourably with these standards in all parameters for consideration as a proppant except for the crush resistance where more than 10% fragments was generated at low pressure of 3000 psi. However, the sand can be applied in shallow depth reservoirs.

Statistical Evaluation and Quality Analysis of Water Resources Around Quarry Site in Abuja Suburban Nigeria

Water resources occupy a vital position regarding the source of human hope for longevity and significant shortfalls on the strive towards sustainable development globally. Host communities to quarry companies without a water treatment plant are greatly affected by use of untreated water. This research highlights statistical evaluation and quality analysis of water resources around a quarry site in FCT Nigeria. The study engaged biological assay, physiological and chemical analysis to quantify contamination levels in the water resources and obtained data were subjected statistically using Pearson’s Correlation, descriptive statistics, Levene’s test for homogeneity and one–way analysis. The physiochemical analysis revealed the water resources to have high turbidity value in 58.3% of sampled population while nitrate concentration and electrical conductivity value were very low. The bioassay revealed presence of coliform bacteria in 100% of sampled population while thermotolerance count discovered disease-causing-pathogens in 41.7% of sampled population. Chemical analysis revealed that Pb, Cr, Ni and As were 91.7%, 83.3% 100% and 100% above recommended permissible limits for sampled population. These results suggests that water resources in this study is unsafe and holds a health-treat with regards to the contaminations inherent in them. Statistical evaluation revealed average positive linear relationship between heavy metal concentration suggesting close relationship of contamination source. Observed strong positive linear relationship between lead and copper, nickel and chromium as well as nickel and arsenic in the scatterplot depicts same source of contamination.