A photonic sensor system for real‐time monitoring of turbidity changes in aquaculture

Abstract

AbstractObjectiveThe objective of this study was to test the compatibility and performance of a developed photonic sensor system, which can serve as a dependable and practical device for continuous monitoring of turbidity changes in aquaculture tanks.MethodsThe fabricated photonic sensor system consisted of an integrated data logger and sensor probe. The sensor probe exhibited a precise emission of infrared light at a wavelength of 850 nm. Moreover, the sensor evaluates the ambient light across the red‐green‐blue spectrum. To ensure accuracy and reliability, the entire system underwent a thorough calibration process, referencing nephelometric turbidity unit values acquired through a specialized handheld turbidimeter. Rigorous trials were systematically conducted in 600‐L seawater tanks featuring tubular sea cucumber Holothuria tubulosa and Gilt‐head Sea Bream Sparus auratus to ensure the sensitivity and robustness of the photonic sensor system to the aquaculture environment.ResultA calibration curve revealed a significant correlation between the infrared channel values of the sensor (photon counts) and the turbidity values measured by the turbidimeter. The photonic sensor effectively captured turbidity changes in the aquaculture tanks, with significant differences observed between the tanks. The sensor performance was evaluated in trials with Gilt‐head Sea Bream, which showed sensitivity to high turbidity changes. The photonic sensor system accurately reflects turbidity changes continuously using its own active light source, independent of ambient light intensity, which is essential for turbid water conditions or for taking measurements in total darkness.ConclusionThe photonic sensor is a reliable tool for the continuous and accurate monitoring of turbidity changes in aquaculture systems. However, there are specific usage limitations under low‐turbidity conditions that can be improved in further studies.