Abstract
Spectrally pure semiconductor lasers produced via self-injection locking to high quality factor monolithic optical resonators demonstrate sub-kHz instantaneous linewidth. The lasers are used in photonic sensor systems and microwave photonic oscillators benefitting from the improved spectral purity, the stability and the reduced environmental sensitivity of the lasers. The laser frequency stability is defined by both the optical resonator and the optical path of the entire system comprising the laser, the resonator, and the miscellaneous optical components. The impacts of the various destabilization factors are usually convoluted, and it is hardly possible to separate them. In this paper, we report on an experimental study of an influence of the variations of the optical path on the laser frequency stability. We have created a whispering gallery mode optical resonator having the record small thermal sensitivity, on the order of 0.1 ppm/ ∘ C, and demonstrated a self-injection locked laser based on this resonator. The measured laser stability is characterized with 1 s Allan deviation of 10 − 12 , limited by the thermal sensitivity of the optical path between the laser and the resonator. The thermal stabilization on the order of 10 μ K at 1 s is achieved using a standard thermo-electric element. The long term drift of the laser frequency is determined by both the fluctuations of the atmospheric pressure in the laboratory impacting the monolithic resonator and by the optical path instability.
Highlights
A broad spectrum of applications of low noise lasers constantly fuels the need for their improvement and for simultaneous reduction of noise, as well as their size and environmental sensitivity.While laboratory scale lasers with extraordinarily high stability and sub-Hz linewidth have been demonstrated [1,2,3], there are no photonic integrated circuit (PIC) devices with sub-kHz linewidth.Whispering gallery mode resonators (WGMRs) [4] as well as microring resonators allow improvement of the laser performance without significant increase of the setup size
Semiconductor lasers integrated with high quality (Q-) factor optical resonators have a potential for the noise reduction featuring sub-kHz integral linewidth as well as sub-Hz instantaneous linewidth [7,8,9,10]
In this paper we report on the development of a calcium fluoride (CaF2 ) WGMR integrated with ceramic layers characterized with negative thermal expansion coefficient
Summary
A broad spectrum of applications of low noise lasers constantly fuels the need for their improvement and for simultaneous reduction of noise, as well as their size and environmental sensitivity.While laboratory scale lasers with extraordinarily high stability and sub-Hz linewidth have been demonstrated [1,2,3], there are no photonic integrated circuit (PIC) devices with sub-kHz linewidth.Whispering gallery mode resonators (WGMRs) [4] as well as microring resonators allow improvement of the laser performance without significant increase of the setup size. A broad spectrum of applications of low noise lasers constantly fuels the need for their improvement and for simultaneous reduction of noise, as well as their size and environmental sensitivity. While laboratory scale lasers with extraordinarily high stability and sub-Hz linewidth have been demonstrated [1,2,3], there are no photonic integrated circuit (PIC) devices with sub-kHz linewidth. Whispering gallery mode resonators (WGMRs) [4] as well as microring resonators allow improvement of the laser performance without significant increase of the setup size. Semiconductor lasers integrated with high quality (Q-) factor optical resonators have a potential for the noise reduction featuring sub-kHz integral linewidth as well as sub-Hz instantaneous linewidth [7,8,9,10]. In the case of WGMRs the technique is based on resonant Rayleigh scattering
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.