Tunneling Of Waves Research Articles

Regulation of Sensitized Phosphorescence in Two-Dimensional Lead Bromine Perovskites by Tuning Excited-State Interactions.

Excited-state interactions within the organic layer play a critical role in sensitized phosphorescence of two-dimensional (2D) perovskites. Herein, we regulate excited-state interactions utilizing isomeric organic ligands 1-naphthylmethylamine (1-NMA) and 1-(2-naphthyl)-methanamine (2-NMA). Transient absorption and first-principles calculations are employed to elucidate the mechanisms of triplet energy transfer (TET) and triplet excimer formation. The results indicate that wave function hybridization and tunneling effect at the inorganic/organic interface contribute to rapid (∼20 ps) and highly efficient (>98%) TET, with the triplet excimer being generated in (1-NMA)2PbBr4 at picosecond time-scale. However, triplet excimer is barely observed in (2-NMA)2PbBr4 due to varying ligand stacking modes. Despite rapid TET, the efficiency of sensitized phosphorescence is low (<0.5%), which is ascribed to pronounced nonradiative decay. By mixing isomeric ligands and optimizing respective ratio, a maximum phosphorescence enhancement of 7.6 folds is achieved. This work provides a detailed mechanistic understanding of triplet excimer sensitization and regulation of sensitized phosphorescence.

Influence of cork-rubber gasket on the circular propagation of train-induced vibration waves in high-speed railway shield tunnels

Shield tunnels are constructed by assembling segment, and this construction method will produce a large number of joints. As the component with the largest contact area in the joints of the shield tunnel, the cork-rubber gasket has a significant effect on the transmission of train-induced vibration waves between the segments. In order to study the influence of cork-rubber gasket on the transmission of train-induced vibration waves in the circumferential direction, based on the hammering test of high-speed railway shield tunnel, a dynamic calculation model for high-speed railway shield tunnel was constructed, and the influence of elasticity modulus of cork-rubber gasket on the propagation of train-induced vibration waves was investigated. The results show that: (1) the longitudinal joints of high-speed railway shield tunnels can weaken high-frequency vibration waves more than low-frequency vibration waves; (2) the lower the modulus of elasticity of cork-rubber gasket is, the greater the attenuation of the peak of the temporal range of vibration acceleration of train-induced vibration waves after they pass through the longitudinal joints; (3) compared with the cork-rubber gasket of high elasticity, the cork-rubber gasket with low elasticity can improve the damping effect of the longitudinal joints on low-frequency bands (0–500 Hz) effectively. This research offers new methodologies for optimising vibration isolation in shield tunnels and contributes to the advancement of tunnel design for high-speed rail systems.

Enhanced near-field radiative heat transfer between borophene sheets on different substrates

Abstract Near-field radiative heat transfer (NFRHT) has the potential to exceed the blackbody limit by several orders of magnitude, offering significant opportunities for energy harvesting. In this study, we have examined the NFRHT between two borophene sheets through the calculation of heat transfer coefficient (HTC). Due to the tunneling of evanescent waves, borophene sheet allows for enhanced heat flux and adjustable NFRHT by varying its electron density and electron relaxation time. Additionally, the near field coupling is further examined when the borophene is deposited on dielectric or lossy substrates. The maximum HTC is closely related to the real part of the dielectric substrate. As a case study, the HTC on the lossy substrate of MoO3, ZnSe and SiC are calculated for comparison. Our results indicate that MoO3 is the optimal substrate to get the enhanced energy transfer coefficient. It results in a remarkable value of 1737 times higher than the blackbody limit owing to the enhanced photon tunneling probability. Thus, our study reveals the effect of substrate on the HTC between borophene sheets and provides a theoretical guidance for the design of near-field thermal radiation devices.

Hidden symmetry-induced effective moving double-zero-index metamaterials.

Materials possessing an effective zero refractive index are often associated with Dirac-like cone dispersion at the center of the Brillouin zone (BZ). It has been reported the presence of hidden symmetry-enforced triply degenerate points [nexus points (NP)] away from the Brillouin zone center with the stacked dielectric photonic crystals. The spin-1 Dirac-like dispersion in the xy plane near the nexus point suggests a method for achieving zero refractive index materials. The stacked photonic crystals at the nexus points can be deemed as an effective moving double-zero-index medium (MDZIM) traveling with a speed relative to the laboratory reference. The ability of this moving double-zero-index medium to enable perfect wave tunneling across barriers without reflection has been demonstrated, dependent on the incident waves' specific angular orientations.

Experimental and numerical simulation of the attenuation effect of blast shock waves in tunnels at different altitudes

Traffic engineering such as tunnels in various altitudinal gradient zone are at risk of accidental explosion, which can damage personnel and equipment. Accurate prediction of the distribution pattern of explosive loads and shock wave propagation process in semi-enclosed structures at various altitude environment is key research focus in the fields of explosion shock and fluid dynamics. The effect of altitude on the propagation of shock waves in tunnels was investigated by conducting explosion test and numerical simulation. Based on the experimental and numerical simulation results, a prediction model for the attenuation of the peak overpressure of tunnel shock waves at different altitudes was established. The results showed that the peak overpressure decreased at the same measurement points in the tunnel entrance under the high altitude condition. In contrast, an increase in altitude accelerated the propagation speed of the shock wave in the tunnel. The average error between the peak shock wave overpressure obtained using the overpressure prediction formula and the measured test data was less than 15%, the average error between the propagation velocity of shock waves predicted values and the test data is less than 10%. The method can effectively predict the overpressure attenuation of blast wave in tunnel at various altitudes.

On Klein tunneling of low-frequency elastic waves in hexagonal topological plates

Incident particles in the Klein tunnel phenomenon in quantum mechanics can pass a very high potential barrier. Introducing the concept of tunneling into the analysis of phononic crystals can broaden the application prospects. In this study, the structure of the unit cell is designed, and the low frequency (< 1 kHz) valley locked waveguide is realized through the creation of a phononic crystal plate with a topological phase transition interface. The defect immunity of the topological waveguide is verified, that is, the wave can propagate along the original path in the cases of impurities and disorder. Then, the tunneling phenomenon is introduced into the topological valley-locked waveguide to analyze the wave propagation, and its potential applications (such as signal separators and logic gates) are further explored by designing phononic crystal plates. This research has broad application prospects in information processing and vibration control, and potential applications in other directions are also worth exploring.

A MODELING OF RF PROPAGATION FOR LOW FREQUENCY IN NATURAL CAVES WITH 3D MODEL SIMULATION

The study of the RF propagation model within natural caves remains challenging. In the past, the propagation model in the tunnel was compared using waveguide theory because of the electrical conductivity of tunnel walls. However, waveguide models have limitations because a cut-off frequency from the tunnel dimension does not allow frequencies lower than the cut-off frequency to propagate. Although the frequency wave lower than the cut-off frequency cannot theoretically propagate, in practice, it can propagate through the cave. Therefore, this paper presents the modelling of RF propagation at low frequencies in natural caves using empirical methods by measuring the waves propagated within cave passages at the Chiang Dao Cave (limestone) and the Patihan Cave (sandstone). The measurement will focus on analyzing and comparing factors, propagation mechanisms, and behavior, which cover the frequencies at 300, 1000, 1650, 2325, and 3000 kHz, to develop the low-frequency attenuation model within the cave proposed in this paper. The 3D cave models obtained from a LiDAR scanner were used to calculate the physical factors of the cave walls, and then the path losses were calculated using our proposed model and compared to the experimental results. In addition, the path losses calculated using 1) CST simulation software and 2) the waveguide model were also compared with the results from the proposed model. The results obtained from the proposed model provide attenuation values similar to those of the experimental results. Finally, the concept of the low-frequency attenuation model can be used for the prediction and analysis of the propagation performance of low-frequency waves in caves, tunnels, or underground mines and lead to the development of cave communication technology and electromagnetic knowledge in the future.

Horizontally and vertically polarized kink oscillations in curved solar coronal loops

Aims. Kink oscillations are frequently observed in coronal loops. This work aims to numerically clarify the influence of the loop curvature on horizontally and vertically polarized kink oscillations. Methods. Working within the framework of ideal magnetohydrodynamics (MHD), we conduct three-dimensional (3D) simulations of axial fundamental kink oscillations in curved density-enhanced loops embedded in a potential magnetic field. Both horizontal and vertical polarizations are examined, and their oscillation frequencies are compared with Wentzel-Kramers-Brillouin (WKB) expectations. We discriminate between two different density specifications. In the first (dubbed “uniform density”), the density is axially uniform and varies continuously in the transverse direction toward a uniform ambient corona. Some further stratification is implemented in the second specification (dubbed “stratified”), allowing us to address the effect of evanescent barriers. Results. Examining the oscillating profiles of the initially perturbed uniform-density loops, we found that the frequencies for both polarizations deviate from the WKB expectation by ∼10%. In the stratified loop, however, the frequency of the horizontal polarization deviates to a larger extent (∼25%). We illustrate the lateral leakage of kink modes through wave tunneling in 3D simulations, for the first time. Despite this, in the uniform density and the stratified loops, the damping time-to-period ratios are similar and are close to the analytical predictions for straight configurations under the thin-tube-thin-boundary (TTTB) assumption. Conclusions. The WKB expectation for straight configurations can reasonably describe the eigenfrequency of kink oscillations only in loops without an asymmetrical cross-loop density profile perpendicular to the oscillating direction. Lateral leakage via wave tunneling is found to be less efficient than resonant absorption, meaning that the latter remains a robust damping mechanism for kink motions even when loop curvature is included.

Nonlinear tunneling of self-similar periodic waves in inhomogeneous two mode optical fibers

Distinct types of self-similar periodic waveforms of the generalized coupled nonlinear Schrödinger equations with varying nonlinearity, gain or loss and group velocity dispersion are obtained. The coupled system applies to the description of light pulse propagation in an inhomogeneous two mode optical fiber. The self-similar solutions are expressed in terms of Jacobian elliptic functions, thus enabling us to identify various kinds of propagating self-similar soliton pulses in their long-wave limit. It is found that these periodic structures exhibit a linear chirp property, which can be utilized to achieve efficient pulse compression and amplification. As a physically relevant application, we discuss the nonlinear tunneling process of these linearly chirped self-similar periodic waves through both dispersion and nonlinear barriers.

Tunnel Effect for Ultrasonic Waves in Tapered Waveguides

Traversal time in the tunneling effect for ultrasonic waves in tapered waveguides is derived considering its analogy with quantum and electromagnetic wave tunneling. If, as traversal time, the so-called phase time is considered, the ultrasonic wave packet shows the equivalent in acoustics of superluminality, i.e., the derived velocity, crosses the limit of bulk transverse ultrasonic waves in the medium of the waveguide that is the equivalent of c in the quantum and electromagnetic cases. The graphs clearly illustrating this so-called Hartman effect are obtained confirming the experimental results in the three different fields.

Numerical Study on the Dynamic Response of Gas Explosion in Uneven Coal Mine Tunnels Using CESE Reaction Dynamics Model

A numerical simulation method combining the detailed chemical reaction mechanism of methane deflagration with an approximate real tunnel structure was proposed to confirm whether the unevenness of the tunnel wall during a coal mine gas explosion can be ignored. The approximate real tunnel model and smooth wall tunnel model were developed using 3D modeling methods. The propagation and attenuation processes of shock waves in the two tunnel models, as well as the different dynamic responses of the two tunnel walls, were compared and analyzed. Research results show that the non-uniformity of the tunnel wall decreases the shock wave overpressure and propagation velocity. The peak overpressure reduction value of the shock wave reaches 81.91 kPa, and the shock wave overpressure reaches its peak at an extended maximum time of 7.4 ms. The stress distribution on the approximate real tunnel wall is discontinuous, the propagation speed of stress waves in the bend tunnel is slower, and the duration of high load is relatively low. The displacement of the approximate real tunnel after gas explosion is lower than that of tunnels with smooth walls, and the displacement of most measuring points on the tunnel on the right is only 1/3–1/2 that of the smooth tunnel.

Dynamic wave tunnel lining GPR images multi-disease detection method based on deep learning

Ground-penetrating radar (GPR) is widely used in tunnel lining non-destructive testing. However, diverse diseases need more data, leading to low accuracy in multi-disease detection. This paper proposes a dynamic wave tunnel lining GPR images multi-disease detection method based on deep learning to improve the detection accuracy of multi-diseases. Firstly, the tunnel lining generative adversarial networks (TLGAN) model generates multi-dimensional GPR images. Secondly, we designed the Wave-backbone model according to the different disease shape attribute characteristics. Meanwhile, multi-dimensional space fusion combined with the global dynamic wave detection networks Wave-DetNets detects the captured multi-scale global waveform features. Finally, the disease depth was further estimated by detecting results. The experimental results show that the average model accuracy in this paper for identifying cavities, loost, and steel rebars is more than 91%, the omission rate reduces to 0.04, and the detection speed reaches 37FPS with a 320 × 320 GPR image sizing. The model has excellent stability and is better than the existing detection model.

Analytical solution for seepage pressure of multilayered sand seabed considering interaction between wave-current action and shield tunnel

Existing theoretical studies of the seepage field around subsea shield tunnels under wave action take less account of the tunnel lining permeability, especially the effect of wave and current action on tunnel. Moreover, the solutions generally treat the sand as homogeneous and isotropic, ignoring the influence of multilayered seabed. In this paper, the analytical solutions are presented for the seepage pressure and liquefaction evaluation of sand around tunnel in multilayered seabed under wave and current action. The pore pressure response of pure seabed is obtained by the transmission and reflection matrix method. The mirror image method is introduced to establish governing equation of excess pore pressure reflected by tunnel, and the analytical solution of equation is obtained by Fourier series expansion under the condition of continuous seepage between sand and lining. Based on the superposition principle, the seepage pressure and liquefaction evaluation of sand around tunnel in multilayered seabed are obtained. Then the analytical solutions are compared with numerical and experimental results, and good agreement is obtained. In addition, the influencing factors of wave parameters (wavelength, period, current), seabed parameters (permeability, shear modulus, saturation) and tunnel parameters (lining thickness, lining permeability) are analyzed.

Numerical analysis of the effect of ventilation door on the propagation characteristics of gas explosion shock waves

Ventilation door are commonly found in tunnels and other underground engineering ventilation structures, disaster periods using its explosion isolation, explosion relief, wind regulation characteristics for disaster prevention and mitigation is of great significance. This paper numerically simulates the propagation characteristics of the gas explosion shock wave in the nearby tunnel when the ventilation door are opened at different degrees, and analyzes the influence mechanism of the opening degree on the change law of the shock wave overpressure distribution in the nearby tunnel. The results show that the shock wave forms a strong turbulence area (high pressure area) on both sides in front of the ventilation door, and the area range and the overpressure value decrease with the increase of the opening degree; the ventilation door reduce the intensity of the shock wave, so that the overpressure behind the ventilation door decreases, and the smaller the opening degree, the lower the overpressure behind the ventilation door. The secondary explosion formed shock wave and the ventilation door reflected shock wave meet to form a stronger shock wave, which leads to different opening degrees of ventilation door, its before, after the roadway and after the bifurcation of the main roadway in the measured points of the overpressure change curve is different, the main difference is that the peak overpressure for the first wave or the second wave peak. The peak overpressure in the tunnel before and after the ventilation door decreases and increases respectively with the increase of the opening length, and the overall decay of the peak overpressure at 5 m and 10 m before the ventilation door is 49.56% and 4.04% respectively and only has an effect on the peak overpressure in main tunnel within 20 m from the bifurcation.

Influence of the door opening on the pressure transient caused by the high-speed subway train passing through the double-track tunnel with the mid-partition wall

Double track tunnel with mid-partition wall is a widely used subway tunnel. In such tunnels, in order to avoid the fire door on the middle partition wall from invading the gauge, the fire door is often removed to form door openings. The existence of door opening connects two parallel tunnels, which affects the aerodynamic effect caused by high-speed subway train passing through the tunnel. In this study, a double track tunnel with mid-partition wall was taken as an example to analyze the aerodynamic effect of high-speed subway train under the door opening conditions, moreover, the surface pressure of two adjacent tunnels and train surface pressure was also analyzed. In addition, the propagation mechanism of pressure wave in open door tunnel was analyzed in detail, and the superposition law of branch pressure wave caused by open door was pointed out. The results indicated that the presence of door openings is beneficial for controlling the peak pressure on the tunnel surface and train surface. For a door opening with a cross-sectional area of 5 m2 (cross-sectional area ratio of 0.116), when the door opening is located 300 m and 700 m away from the tunnel entrance, the peak positive pressure can be reduced by up to 21.9 % and the peak negative pressure can be reduced by 21.1 %. The cross-sectional area and number of door openings have a limited effect on reducing the peak pressure of the tunnel. Compared to the number of door openings, the position of the door opening has a more significant impact on the peak pressure inside the tunnel and on the surface of the train.

Gravitational lensing and tunneling of mechanical waves in synthetic curved spacetime

Gravitational lensing and tunneling of mechanical waves in synthetic curved spacetime

Wave packet tunneling and imaginary wave vector dispersion

Dispersion associated with the complex band structure of a periodic potential can be used to explain single-electron wave packet tunneling through a finite-sized tunnel barrier. The imaginary k-space dispersion in a tunnel barrier may be viewed as a filter that controls the arrival time, shape, and group velocity of a transmitted wave packet. This k-space filter can be designed to increase or decrease the group velocity of the transmitted pulse and a transmitted peak-pulse probability arrival time can be engineered to occur before or after that of an electron wave packet propagating in the absence of the tunnel barrier.

Near-field thermophotovoltaic energy conversion analysis based on enhanced radiative absorption distribution

Near-field radiation has been widely shown to greatly boost the electrical power of thermophotovoltaic (TPV) cells. However, there is a lack of theoretical analysis exploring the important influences of near-field effects on radiative absorption distributions as well as TPV energy conversion performances. This work investigates the electrical performances of near-field TPV cells made of InGaSb coupled with different practical emitters such as plain tungsten (W), indium tin oxide (ITO) film, and alternate W and alumina multilayer in detail. A comprehensive analysis is conducted to systematically compare the impacts of evanescent wave tunneling, surface plasmon resonance, and hyperbolic modes on spatial distributions of radiative absorption and the profiles of local carrier concentrations. The detailed and accurate analysis reveals the crucial role of near-field radiation emitted by various emitters in charge collection efficiency, thermal photon flux penetration depth, and photocurrent generation. Thus, the results certify that the electric power could be enhanced by utilizing ITO and multilayer emitters instead of a plain W emitter. The efficiency for an ITO emitter increases with decreasing vacuum gap owing to the suppressed bulk recombination but decreases when the vacuum gap falls below 18 nm due to increased surface recombination. While the efficiency for a multilayer emitter is comparatively lower due to the larger sub-bandgap photons and inefficient n-region. Furthermore, we verify the strategies for performance improvement via decreasing the surface recombination and optimizing the p-region thickness. The underlying mechanism is interpreted based on the spatial distribution and the collection efficiency of minority carriers.

Sub-barrier recollisions and the three classes of tunneling time delays in strong-field ionization

Tunneling ionization is characterized by a negative time delay, observed asymptotically as a specific shift of the photoelectron momentum distribution, which is caused by the interference of the sub-barrier recolliding and direct ionization paths. In contrast, a \textit{Gedankenexperiment} following the peak of the wavefunction shows a positive tunneling time delay at the tunnel exit, considering only the direct ionization path. In this paper, we investigate the effects of sub-barrier recollisions on the time delay pattern at the tunnel exit. We conclude that the interference of the direct and recolliding trajectories decreases the tunneling time delay at the exit by the value equal to the asymptotic time delay maintaining, however, its sizeable positive value. Finally, we discuss the recent experiment [Light: Science \& Applications 11, 1 (2022)] addressing the tunneling time in a modified two-color attoclock setup. The analysis of the experimental findings with our theoretical model indicates the physical necessity to introduce a new time characteristic for tunneling ionization -- the time delay describing the initiation of the tunneling wave packet.

Medium-Bridge Near-Field Thermophotovoltaic System

ABSTRACT The energy conversion performance of thermophotovoltaic (TPV) systems can be improved when the vacuum gap between the emitter and the TPV cell is at the near-field owing to the photon tunneling of evanescent waves. Among them, the back-gapped-reflector TPV systems have gained interest as a method of improving their conversion efficiency by optimizing the spectral absorption of TPV cells. In this work, we introduce an alternative concept for the back-gapped-reflector TPV systems, namely the medium-bridge near-field TPV system, by building a medium bridge between the metal reflector and the TPV cell using SU8 nanofilm. The SU8 medium-bridge achieves a noticeable improvement in output performance by increasing the spectral absorption of the InAs cell and reducing parasitic absorption losses of the Au substrate. The results indicate that, as a consequence of the improved effect of the medium-bridge, the output power density and efficiency of this system exceed those of the conventional TPV system (which lacks a medium-bridge) by 26.4% and 36.5%, respectively. Moreover, we systematically analyze the modulation of medium-bridge thicknesses and cell thickness on output performance and clarify how both affect energy losses of this near-field TPV system. Our work offers a strategy to improve the energy conversion performance of the near-field TPV system, opening new opportunities for developing near-field energy conversion.