Tunable Vacuum Ultraviolet Light Research Articles

Ionization potentials of metal clusters studied with a broad range, tunable vacuum ultraviolet light source.

In this work, we present an alternative to complex laser setups or synchrotron light sources to accurately measure the ionization potentials of metal clusters. The setup is based on a commercial Xe flash lamp, combined with a vacuum monochromator, and has been applied to determine the ionization potentials of Snn clusters with n = 8-12 atoms. The uncertainty in the determination of the ionization potentials is mainly caused by the bandwidth of the monochromator. The adiabatic ionization potentials (AIPs) are extracted from experimental photoionization efficiency curves. Franck-Condon simulations are additionally used to interpret the shape and onset of the photo-ion yield. The obtained AIPs are (all energies are in eV) Sn8 (6.53 ± 0.05), Sn9 (6.69 ± 0.04), Sn10 (6.93 ± 0.03), Sn11 (6.34 ± 0.05), and Sn12 (IsoI 6.64 ± 0.04 and IsoIII 6.36 ± 0.05). Furthermore, the impact of multiple isomers present in the experiment on the photo-ion yield is addressed and compared with other experimental data in the literature.

A unified reaction network on the formation of five-membered ringed polycyclic aromatic hydrocarbons (PAHs) and their role in ring expansion processes through radical-radical reactions.

Exploiting a chemical microreactor in combination with an isomer-selective product identification through fragment-free photoionization utilizing tunable vacuum ultraviolet (VUV) light in tandem with the detection of the ionized molecules by a high resolution reflection time-of-flight mass spectrometer (Re-TOF-MS), the present investigation reveals molecular mass growth processes to four distinct polycyclic aromatic hydrocarbons carrying two six- and one five-membered ring (C13H10): 3H-cyclopenta[a]naphthalene, 1H-cyclopenta[b]naphthalene, 1H-cyclopenta[a]naphthalene, and fluorene in the gas phase. Temperatures of 973 and 1023 K simulating conditions in combustion settings along with circumstellar envelopes of carbon-rich stars and planetary nebulae. These reactions highlight the importance of methyl-substituted aromatic reactants (biphenyl, naphthalene) which can be converted to the methylene (-CH2˙) motive by hydrogen abstraction or photolysis. Upon reaction with acetylene, methylene-substituted aromatics carrying a hydrogen atom at the ortho position of the ring can be then converted to cyclopentadiene-annulated aromatics thus providing a versatile pathway to five-membered ring aromatics at elevated temperatures.

Rotational state specific dissociation dynamics of D2O via the C̃(010) state: The effect of bending vibrational excitation.

The rotational state resolved photodissociation dynamics of D2O via the C̃(010) state has been investigated by using the D-atom Rydberg tagging time-of-flight technique combined with a tunable vacuum ultraviolet light source. The D-atom action spectrum of the C̃(010) ← X̃(000) band and the corresponding time-of-flight (TOF) spectra of D-atom photoproducts formed following the excitation of D2O to individual rotational transition have been measured. By comparison with the action spectrum of the C̃(000) ← X̃(000) band, the bending vibrational constant of the C̃ state for D2O can be determined to be v2 = 1041.37 ± 0.71cm-1. From the TOF spectra, the product kinetic energy spectra, the vibrational state distributions of OD products, and the state resolved anisotropy parameters have been determined. The experimental results indicate a dramatic variation in the OD product state distributions for different rotational excitations. This illuminates that there are two distinctive coupling channels from the C̃(010) state to the low-lying electronic states: the homogeneous electronic coupling to the Ã1B1 state, resulting in vibrationally hot OD(X) products, and the Coriolis-type coupling to the B̃1A1 state, producing vibrationally cold but rotationally hot OD(X) and OD(A) products. Furthermore, the three-body dissociation channel is confirmed, which is attributed to the C̃ → 1A2 or C̃ → Ã pathway. In comparison with the previous results of D2O photolysis via the C̃(000) state, it is found that the v2 vibration of the parent molecule enhances both the vibrational and rotational excitations of OD products.

Elucidating the differences in oxidation of high-performance \u03b1- and \u03b2- diisobutylene biofuels via Synchrotron photoionization mass spectrometry

Biofuels are a promising ecologically viable and renewable alternative to petroleum fuels, with the potential to reduce net greenhouse gas emissions. However, biomass sourced fuels are often produced as blends of hydrocarbons and their oxygenates. Such blending complicates the implementation of these fuels in combustion applications. Variations in a biofuel’s composition will dictate combustion properties such as auto ignition temperature, reaction delay time, and reaction pathways. A handful of novel drop-in replacement biofuels for conventional transportation fuels have recently been down selected from a list of over 10,000 potential candidates as part of the U.S. Department of Energy’s (DOE) Co-Optimization of Fuels and Engines (Co-Optima) initiative. Diisobutylene (DIB) is one such high-performing hydrocarbon which can readily be produced from the dehydration and dimerization of isobutanol, produced from the fermentation of biomass-derived sugars. The two most common isomers realized, from this process, are 2,4,4-trimethyl-1-pentene (α-DIB) and 2,4,4-trimethyl-2-pentene (β-DIB). Due to a difference in olefinic bond location, the α- and β- isomer exhibit dramatically different ignition temperatures at constant pressure and equivalence ratio. This may be attributed to different fragmentation pathways enabled by allylic versus vinylic carbons. For optimal implementation of these biofuel candidates, explicit identification of the intermediates formed during the combustion of each of the isomers is needed. To investigate the combustion pathways of these molecules, tunable vacuum ultraviolet (VUV) light (in the range 8.1–11.0 eV) available at the Lawrence Berkeley National Laboratory’s Advanced Light Source (ALS) has been used in conjunction with a jet stirred reactor (JSR) and time-of-flight mass spectrometry to probe intermediates formed. Relative intensity curves for intermediate mass fragments produced during this process were obtained. Several important unique intermediates were identified at the lowest observable combustion temperature with static pressure of 93,325 Pa and for 1.5 s residence time. As this relatively short residence time is just after ignition, this study is targeted at the fuels’ ignition events. Ignition characteristics for both isomers were found to be strongly dependent on the kinetics of C4 and C7 fragment production and decomposition, with the tert-butyl radical as a key intermediate species. However, the ignition of α-DIB exhibited larger concentrations of C4 compounds over C7, while the reverse was true for β-DIB. These identified species will allow for enhanced engineering modeling of fuel blending and engine design.

Detection of the keto-enol tautomerization in acetaldehyde, acetone, cyclohexanone, and methyl vinyl ketone with a novel VUV light source

The discovery of enols in combustion environments and our atmosphere has garnered increasing attention to the many unanswered questions surrounding enol chemistry. The scarcity of experimental data concerning these enols renders combustion and atmospheric models with a lack of constraining parameters, leading to varying computational predictions. Experimental detection is difficult because mass spectrometry, a powerful tool for probing a wide variety of species, cannot distinguish between enols and their thermodynamically favorable ketone isomers. A solution to this ambiguity is to use tunable vacuum ultraviolet (VUV) light from a synchrotron to identify the presence of the enol by its lower ionization energy compared to the isomer. We present a tabletop-scale VUV light source that implements highly cascaded harmonic generation, a new regime of cascaded nonlinear optics, to provide a set of spectral lines spaced by 1.2 eV. We demonstrate that the variety of photon energies available allows us to detect the keto-enol tautomerization of four aldehydes and ketones. By combining this novel VUV light source with an established microreactor, we first revisit the formation of vinyl alcohol from acetaldehyde and confirm that the observed isomerization is indeed unimolecular. Secondly, we observe the thermal tautomerization of acetone to propen-2-ol for the first time. Finally, we observe the thermal tautomerization of cyclohexanone to 1-cyclohexenol and methyl vinyl ketone to 2-hydroxybutadiene, where the results are in good agreement with those reported at a synchrotron. Our measurements can be used to constrain models, inform future experimental studies of enol reactivity, and potentially enhance current understanding of combustion and environmental chemistry.

Isomer-sensitive characterization of low temperature oxidation reaction products by coupling a jet-stirred reactor to an electron/ion coincidence spectrometer: case of n-pentane.

Through the use of tunable vacuum ultraviolet light generated by the DESIRS VUV synchrotron beamline, a jet-stirred reactor was coupled for the first time to an advanced photoionization mass spectrometer based upon a double imaging PhotoElectron PhotoIon COincidence (i2PEPICO) scheme. This new coupling was used to investigate the low-temperature oxidation of n-pentane, a prototype molecule for gasoline or diesel fuels. Experiments were performed under quasi-atmospheric pressure (1.1 bar) with a residence time of 3 s for two equivalence ratios (1/3 and 0.5) with a fuel initial mole fraction of 0.01. The measured time-of-flight mass spectra are in good agreement with those previously obtained with other photoionization mass spectrometers and, like those previous ones, display several m/z peaks for which the related species assignation is ambiguous. This paper shows how the analysis of the coincident mass-tagged Threshold PhotoElectron Spectra (TPES) together with first principle computations, consisting of the determination of the adiabatic ionization energies and the spectra of some products, may assist products' identification. The results mostly confirm those previously obtained by photoionization mass spectrometry and gas chromatography, but also allow a more accurate estimation of the 1-pentene/2-pentene mole fraction ratio. Our data also indicate a higher formation of acetone and methyl ethyl ketone than what is predicted by current models, as well as the presence of products that were not previously taken into account, such as methoxyacetylene, methyl vinyl ketone or furanone. The formation of three, four and five membered ring cyclic ethers is confirmed along with linear ketones: 2- and 3-pentanone. A significant general trend in indicating higher amounts of ketones than are indicated by gas chromatography is noted. Finally, TPES of alkenylhydroperoxides are also provided for the first time and constrains on the isomers identification are provided.

Observation of the Carbon Elimination Channel in Vacuum Ultraviolet Photodissociation of OCS.

The textbook mechanism for OCS photodissociation mainly involves the CO + S or CS + O product channel via a single bond fission. However, a third dissociation channel concerning the cleavage of both C-S and C-O bonds yielding SO + C products, though thermodynamically allowed, has never been verified experimentally to date. By using a tunable vacuum ultraviolet laser light and time-sliced velocity map ion imaging technique, we have clearly observed the SO(X3Σ-) + C(3PJ=0) products as the vacuum ultraviolet laser photon energy gradually exceeds its thermodynamic threshold. The corresponding SO(X3Σ-) coproducts are highly vibrationally excited and show varying angular distributions from isotropic to anisotropic as the excitation photon energy increases. Theoretical analysis suggests that a fast nonadiabatic pathway plays a dominant role in the formation of the anisotropic SO products. That isotropic products arise as the excitation photon energies approach the thermodynamic threshold can be reasonably explained by the "roaming mechanism".

Influence of the Ether Functional Group on Ketohydroperoxide Formation in Cyclic Hydrocarbons: Tetrahydropyran and Cyclohexane.

Photolytically initiated oxidation experiments were conducted on cyclohexane and tetrahydropyran using multiplexed photoionization mass spectrometry to assess the impact of the ether functional group in the latter species on reaction mechanisms relevant to autoignition. Pseudo-first-order conditions, with [O2]0:[R•]0 > 2000, were used to ensure that R• + O2 → products were the dominant reactions. Quasi-continuous, tunable vacuum ultraviolet light from a synchrotron was employed over the range 8.0-11.0 eV to measure photoionization spectra of the products at two pressures (10 and 1520 Torr) and three temperatures (500, 600, and 700 K). Photoionization spectra of ketohydroperoxides were measured in both species and were qualitatively identical, within the limit of experimental noise, to those of analogous species formed in n-butane oxidation. However, differences were noted in the temperature dependence of ketohydroperoxide formation between the two species. Whereas the yield from cyclohexane is evident up to 700 K, ketohydroperoxides in tetrahydropyran were not detected above 650 K. The difference indicates that reaction mechanisms change due to the ether group, likely affecting the requisite •QOOH + O2 addition step. Branching fractions of nine species from tetrahydropyran were quantified with the objective of determining the role of ring-opening reactions in diminishing ketohydroperoxide. The results indicate that products formed from unimolecular decomposition of R• and •QOOH radicals via concerted C-C and C-O β-scission are pronounced in tetrahydropyran and are insignificant in cyclohexane oxidation. The main conclusion drawn is that, under the conditions herein, ring-opening pathways reduce the already low steady-state concentration of •QOOH, which in the case of tetrahydropyran prevents •QOOH + O2 reactions necessary for ketohydroperoxide formation. Carbon balance calculations reveal that products from ring opening of both R• and •QOOH, at 700 K, account for >70% at 10 Torr and >55% at 1520 Torr. Three pathways are confirmed to contribute to the depletion of •QOOH in tetrahydropyran including (i) γ-•QOOH → pentanedial + •OH, (ii) γ-•QOOH → vinyl formate + ethene + •OH, and (iii) γ-•QOOH → 3-butenal + formaldehyde + •OH. Analogous mechanisms in cyclohexane oxidation leading to similar intermediates are compared and, on the basis of mass spectral results, confirm that no such ring-opening reactions occur. The implication from the comparison to cyclohexane is that the ether group in tetrahydropyran increases the propensity for ring-opening reactions and inhibits the formation of ketohydroperoxide isomers that precede chain-branching. On the contrary, the absence of such reactions in cyclohexane enables ketohydroperoxide formation up to 700 K and perhaps higher temperature.

VUV Photoionization Study of the Formation of the Simplest Polycyclic Aromatic Hydrocarbon: Naphthalene (C10H8).

The formation of the simplest polycyclic aromatic hydrocarbon (PAH), naphthalene (C10H8), was explored in a high-temperature chemical reactor under combustion-like conditions in the phenyl (C6H5)-vinylacetylene (C4H4) system. The products were probed utilizing tunable vacuum ultraviolet light by scanning the photoionization efficiency (PIE) curve at a mass-to-charge m/ z = 128 (C10H8+) of molecules entrained in a molecular beam. The data fitting with PIE reference curves of naphthalene, 4-phenylvinylacetylene (C6H5CCC2H3), and trans-1-phenylvinylacetylene (C6H5CHCHCCH) indicates that the isomers were generated with branching ratios of 43.5±9.0 : 6.5±1.0 : 50.0±10.0%. Kinetics simulations agree nicely with the experimental findings with naphthalene synthesized via the hydrogen abstraction-vinylacetylene addition (HAVA) pathway and through hydrogen-assisted isomerization of phenylvinylacetylenes. The HAVA route to naphthalene at elevated temperatures represents an alternative pathway to the hydrogen abstraction-acetylene addition (HACA) forming naphthalene in flames and circumstellar envelopes, whereas in cold molecular clouds, HAVA synthesizes naphthalene via a barrierless bimolecular route.

A thermal decomposition study of pine wood under ambient pressure using thermogravimetry combined with synchrotron vacuum ultraviolet photoionization mass spectrometry

As pyrolysis is the initial step involved in thermochemical processes of biomass, understanding of the pyrolytic behavior of biomass is crucial to biomass thermochemical conversions. This work presents a new facility for studying the pyrolysis behavior of solid fuels. The experimental setup contains a thermogravimetry system connected with a home-made reflectron time-of-flight mass spectrometer via a single-stage molecular beam sampling interface, and a tunable vacuum ultraviolet (VUV) light generated from synchrotron source is used for soft photoionization. Evolution of the gaseous products of pine wood pyrolysis was examined at a heating rate of 20°C/min in a nitrogen environment at atmospheric pressure. Experiments were performed at the photon energies of 10.0, 10.5 and 11.0 eV, and mass spectra of gaseous products were recorded by the time-of-flight mass analyzer every five seconds. Species with the mass range of m/z 20–220 are presented and possible formation pathways of typical products are discussed.

An isomer-specific study of solid nitromethane decomposition pathways – Detection of aci-nitromethane (H2CNO(OH)) and nitrosomethanol (HOCH2NO) intermediates

An isomer specific study of energetic electron exposed nitromethane ices was performed via photoionization – reflectron time of flight mass spectrometry (PI-ReTOF-MS) of the subliming products employing tunable vacuum ultraviolet light for ionization. Supported by electronic structure calculations, nitromethane (CH3NO2) was found to isomerize to methyl nitrite (CH3ONO) and also via hydrogen migration to the hitherto elusive aci-nitromethane isomer (H2CNO(OH)). The latter isomerizes to nitrosomethanol (HOCH2NO) through hydroxyl group (OH) migration, and, probably, ring closure to the cyclic 2-hydroxy-oxaziridine isomer (c-H2CON(OH)) as well. The importance of hydrogen migrations was also verified via the nitrosomethane (CH3NO) – formaldehyde oxime isomer (CH2NOH) pair.

Multiplexed Photoionization Mass Spectrometry Investigation of the O((3)P) + Propyne Reaction.

The reaction of O((3)P) + propyne (C3H4) was investigated at 298 K and 4 Torr using time-resolved multiplexed photoionization mass spectrometry and a synchrotron-generated tunable vacuum ultraviolet light source. The time-resolved mass spectra of the observed products suggest five major channels under our conditions: C2H3 + HCO, CH3 + HCCO, H + CH3CCO, C2H4 + CO, and C2H2 + H2 + CO. The relative branching ratios for these channels were found to be 1.00, (0.35 ± 0.11), (0.18 ± 0.10), (0.73 ± 0.27), and (1.31 ± 0.62). In addition, we observed signals consistent with minor production of C3H3 + OH and H2 + CH2CCO, although we cannot conclusively assign them as direct product channels from O((3)P) + propyne. The direct abstraction mechanism plays only a minor role (≤1%), and we estimate that O((3)P) addition to the central carbon of propyne accounts for 10% of products, with addition to the terminal carbon accounting for the remaining 89%. The isotopologues observed in experiments using d1-propyne (CH3CCD) and analysis of product branching in light of previously computed stationary points on the singlet and triplet potential energy surfaces (PESs) relevant to O((3)P) + propyne suggest that, under our conditions, (84 ± 14)% of the observed product channels from O((3)P) + propyne result from intersystem crossing from the initial triplet PES to the lower-lying singlet PES.

Efficient and tunable high-order harmonic light sources for photoelectron spectroscopy at surfaces

With the recent progress in high-order harmonic generation (HHG) using femtosecond lasers, laboratory photoelectron spectroscopy with an ultrafast, widely tunable vacuum-ultraviolet light source has become available. Despite the well-established technique of HHG-based photoemission experiments at kilohertz repetition rates, the efficiency of these setups can be intrinsically limited by the space-charge effects. Here we present recent developments of compact HHG light sources for photoelectron spectroscopy at high repetition rates up to megahertz, and examples for angle-resolved photoemission experiments are demonstrated.

Formation of fulvene in the reaction of C2H with 1,3-butadiene

Products formed in the reaction of C2H radicals with 1,3-butadiene at 4Torr and 298K are probed using photoionization time-of-flight mass spectrometry. The reaction takes place in a slow-flow reactor, and products are ionized by tunable vacuum-ultraviolet light from the Advanced Light Source. The principal reaction channel involves addition of the radical to one of the unsaturated sites of 1,3-butadiene, followed by H-loss to give isomers of C6H6. The photoionization spectrum of the C6H6 product indicates that fulvene is formed with a branching fraction of (57±30)%. At least one more isomer is formed, which is likely to be one or more of 3,4-dimethylenecyclobut-1-ene, 3-methylene-1-penten-4-yne or 3-methyl-1,2-pentadien-4-yne. An experimental photoionization spectrum of 3,4-dimethylenecyclobut-1-ene and simulated photoionization spectra of 3-methylene-1-penten-4-yne and 3-methyl-1,2-pentadien-4-yne are used to fit the measured data and obtain maximum branching fractions of 74%, 24% and 31%, respectively, for these isomers. An upper limit of 45% is placed on the branching fraction for the sum of benzene and 1,3-hexadien-5-yne. The reactive potential energy surface is also investigated computationally. Minima and first-order saddle-points on several possible reaction pathways to fulvene+H and 3,4-dimethylenecyclobut-1-ene+H products are calculated.

Near-threshold photoionization mass spectra of combustion-generated high-molecular-weight soot precursors

In this work, we present mass spectra showing organic species with mass-to-charge ratios between 15 and 900 sampled from near-atmospheric pressure, non-premixed, opposed-flow flames of acetylene, ethylene, and propane using an aerosol mass spectrometer with flash vaporization. Near-threshold photoionization was achieved by synchrotron-generated tunable vacuum-ultraviolet (VUV) light. Among the three different fuels, we observed variation in the mass progression, peak intensities, and isomeric content identifiable in photoionization-efficiency curves. The results indicate that different pathways contribute to the molecular growth of soot precursors and that the significance of these mechanisms is likely to depend on the fuel structure and/or flame conditions. Previous work has highlighted thermodynamic propensities for precursor formation; however, our results suggest that kinetic mechanisms play a role in determining the partitioning of soot precursor isomers under the conditions investigated here. Evidence for aliphatic-bridged and oxygenated species was also observed. Such species have been proposed as a possible precursor to particle inception following cluster formation but have never been confirmed.

Does Ozone–Water Complex Produce Additional OH Radicals in the Atmosphere?

Ozone-water complex has been thought to play a role in producing atmospheric OH radicals through its photolysis. Here, we re-examined the absorption cross-section of the ozone-water complex with a new method to tell whether the above speculation is valid. With argon solvation and photoionization by tunable vacuum ultraviolet light, we were able to selectively probe the ozone-water 1:1 complex. The measured cross-section of the complex is only similar to the sum of the cross-sections of ozone and water monomers at 157.6, 248.4, and 308.4 nm. In addition, we did not observe any absorption of the complex at 351.8 nm. The results indicate that the OH production through the photolysis of the ozone-water complex is much slower than previously thought.

Temperature-dependent absorption cross-section measurements of 1-butene (1-C4H8) in VUV and IR

Vacuum ultraviolet (VUV) and infrared (IR) absorption cross-section measurements of 1-butene (1-C4H8; CH2=CHCH2CH3; Butylene) are reported over the temperature range of 296–529K. The VUV measurements are performed between 115 and 205nm using synchrotron radiation as a tunable VUV light source. Fourier Transform Infrared (FTIR) spectroscopy is employed to measure absorption cross-section and band strengths in the IR region between 1.54 and 25μm (∼6500–400cm−1). The measured room-temperature VUV and IR absorption cross-sections are compared with available literature data and are found to be in good agreement. The oscillator strength for the electronic transition (A1A′→X1A′) around 150–205nm is determined to be 0.32±0.01.The gas temperature has a strong effect on both VUV and IR spectra. Measurements made in the VUV region show that the peak value of the band cross-section decreases and the background continuum increases with increasing gas temperature. This behavior is due to a change in the rotational and vibrational population distribution of 1-butene molecule. Similar changes in rotational population are observed in the IR spectra. Moreover, variation of the IR spectra with temperature is used to measure the enthalpy difference between syn and skew conformations of 1-butene and is found to be 0.24±0.03kcal/mol, which is in excellent agreement with values reported in the literature. The measurements reported in this work will provide the much-needed spectroscopic information for the development of high-temperature quantitative diagnostics in combustion applications and validation of atmospheric chemistry models of extra-solar planets.

Studies of laminar opposed-flow diffusion flames of acetylene at low-pressures with photoionization mass spectrometry

We have designed an opposed-flow flame system to investigate the chemical composition of non-premixed flames using in situ flame-sampling molecular-beam mass spectrometry with synchrotron-generated tunable vacuum-ultraviolet light as an ionization source. This paper provides details of the experimental apparatus, sampling method, and data-reduction procedures. To test the system, we have investigated the chemical composition of three low-pressure (30–50Torr), non-premixed, opposed-flow acetylene(Ar)/O2(Ar) flames. We measured quantitative mole-fraction profiles as a function of the distance from the fuel outlet for the major species and several intermediates, including the methyl and propargyl radicals. We determined the temperature profiles of these flames by normalizing a sampling-instrument function to thermocouple measurements near the fuel outlet. A comparison of the experimental temperature and major species profiles with modeling results indicates that flame perturbations caused by the sampling probe are minimal. The observed agreement between experimental and modeled results, apparent for most combustion species, is similar to corresponding studies of premixed flames.

Soft Ionization of Thermally Evaporated Hypergolic Ionic Liquid Aerosols

Isolated ion pairs of a conventional ionic liquid, 1-Ethyl-3-Methyl-Imidazolium Bis(trifluoromethylsulfonyl)imide ([Emim(+)][Tf(2)N(-)]), and a reactive hypergolic ionic liquid, 1-Butyl-3-Methyl-Imidazolium Dicyanamide ([Bmim(+)][Dca(-)]), are generated by vaporizing ionic liquid submicrometer aerosol particles for the first time; the vaporized species are investigated by dissociative ionization with tunable vacuum ultraviolet (VUV) light, exhibiting clear intact cations, Emim(+) and Bmim(+), presumably originating from intact ion pairs. Mass spectra of ion pair vapor from an effusive source of the hypergolic ionic liquid show substantial reactive decomposition due to the internal energy of the molecules emanating from the source. Photoionization efficiency curves in the near threshold ionization region of isolated ion pairs of [Emim(+)][Tf(2)N(-)] ionic liquid vapor are compared for an aerosol source and an effusive source, revealing changes in the appearance energy due to the amount of internal energy in the ion pairs. The aerosol source has a shift to higher threshold energy (∼0.3 eV), attributed to reduced internal energy of the isolated ion pairs. The method of ionic liquid submicrometer aerosol particle vaporization, for reactive ionic liquids such as hypergolic species, is a convenient, thermally "cooler" source of isolated intact ion pairs in the gas phase compared to effusive sources.

Photodissociation dynamics of D2O via the $\tilde B({}^1A_1)$B̃(A11) electronic state

Photodissociation dynamics of D(2)O in the B̃((1)A(1)) state at different photolysis wavelengths have been investigated using the D-atom Rydberg "tagging" time-of-flight (TOF) technique, in combination with a tunable vacuum ultraviolet photolysis light source. TOF spectra of the D-atom product from the D(2)O photodissociation in both parallel and perpendicular polarizations have been measured. Product kinetic energy distributions and angular distributions have been derived from these TOF spectra. From these distributions, internal state distributions of the OD product as well as the OD quantum state specific angular anisotropy parameters have been derived. Two product channels governed by distinct dissociation dynamics have been clearly observed in the B̃((1)A(1)) state photodissociation: ground electronic state radical product OD(X (2)Π) + D and excited electronic state OD(A (2)Σ(+)) + D. The OD(A) + D channel proceeds via adiabatic pathway on the B̃((1)A(1)) state surface, producing rovibrational excitation in the OD(A) product, while the OD(X) + D channel is generated through nonadiabatic pathway mainly via conical intersections between the B̃((1)A(1)) and the X̃((1)A(1)) state surfaces. Due to strong angular force induced by the conical intersections, the OD(X) product is extremely hot in the rotational excitation close to the energy limit (N ∼ 50 for v = 0). However, the vibrational excitation is cold in the OD(X) product with dominant population in the ground vibrational state v = 0. Detailed experimental results at different photolysis wavelengths show that at higher energy the unstable periodic orbit, from which dissociation starts, on the B̃ state has stronger excitation degree of the OD internal state. The negative angular anisotropy parameters of the OD(A) products suggest that the angular forces in this adiabatic dissociation pathway from these periodic orbits have changed the original angular distribution of the D(2)O molecule excited by the B̃((1)A(1))←X̃((1)A(1)) parallel transition.